waste compactor used for sale

KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: Bwhz3x0q • It is easy to discharge potato peel because it is discharged through a designated chute • Peeled ...

KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: • It is easy to discharge potato peel because it is discharged through designated chute • Peeled potatoes ca ...

Onion peeling machine from the Dutch company DOFRA. For sale two such machines. - The efficiency of one machine is from 50 to 70 onions per minute, which gives an average of about 360 kg of peeled onions per hour (i.e. 60 pcs x 0,1 kg= 6 kg/min x 60min=360 kg/h). This efficiency is tested and confirmed (with one person stacking and one person controlling the final peeling stage). -has a hopper - belt with takers - the onion is taken from the charging basket, from which it is transported by a belt conveyor to the peeling section. - The cutting mechanism of the peeler also cuts the outer scales of the onion for easy removal. The depth of the incision can be adjusted to peel one or more scales. From the peeling section, the onions go to the rotary grippers, which, with the help of an air stream and with the help of the rotary motion of the grippers, get rid of the onion husks. -  ...

Kronen TT450 Top and Tail machine 2011, stainless frame, ideal for removing the core of lettuce with flat stem (e.g. Frisee, Endive / Escarole, Romaine / Cos) and cutting leaf tips. automatic waste separation which can be perfected by appropriate waste and outfeed belt, 4000Kgs per hour, mobile, 3Ph

ABL brand machine, model GTF WM. The watermelon line WML5 can be used to process watermelons. With the WML5 line, the watermelons are placed manually on a loading station that advances to the cutting station. The selected watermelons are pushed to a system that cuts the fruit into large slices (thickness to be determined). They are then picked up manually one by one by an operator and positioned on special shuttles. During transport inside the machine, the slices are selected according to their diameter by a special system. Determined by the size, a pick & place device removes them by placing them on the corresponding cutting unit and the diameter of the story producing cubes. The cubes and external waste are transported and separated on two underlying belts for further processing. The machine allows loading (manual and continuous) at a capacity of 4 - 5 fruits per minute. The machine c ...

Lilla Coffee Roaster, made in Brazil. Sup-ecologically-friendly, it recycles the hot air from the drum back into the furnace” which acts as it’s own after-burner and wastes no heat. This cuts down on the amount of gas used. From 2005 until 2019, it has roasted most of our coffee. We have been working on a refurbishment program to bring it back to perfect working order. This is now complete and the roaster is ready for another 15 years…perhaps – a video which we made during final testing phase is available on request.

5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED - strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - n. 2 working tables 1400x3000 mm - n. 3+3 rails per each working table - n. 3+3 CSR supports per each table - head type CS 44 (n. 4 motors 7.5 kW each) - rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - n. 2 inverters - wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - remote support - communication PC/CN TCP/IP - cabin + roof - CE rules - year 2010 - COMPLETELY RECONDITIONED

Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in the turret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360° 30 Maximum punch diameter (size D )– separate 81 mm Maximum punch diameter in XMTE4M magazine 4 x 31.7 mm Maximum punch diameter in XMTE6M magazine 6 x 24.0 mm Maximum punch diameter in XMTE10M magazine 2 x 24.8 x 12.7 mm Working range in Y axis (with Multitool) 1300 mm Working range in the Y axis (single tool) 1250 mm Working range in the X axis (with Multitool) 2550 mm Numerically controlled stroke depth 0.1 – 31 mm Automatic repositioning of clamps in the X axis up to 10,000 mm Max. positioning speed in axis Y+X 80 m/min. Axis acceleration 10 m/sec² Number of strokes – ( step 1.0mm ) 1000/min USB port 6 Weight 7800 kg Max. jaw opening 11 mm Max. stroke 31 mm Power supply 3 x 400 V/50 Hz Machine power 8 ...

The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...

Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.

Perfect binder Make Bourg Model BB2000 Year 2002 Max book size 450 mm Min-Max thickness 2-60 mm Cycles up to 250 Details waste suction, grinding station, single glue roll application, cover clamp Available direct

A used and fully functional joinery machine of the HUNDEGGER type. K2i 625 - 5 axes, built in 2009, with the entire waste discharge technology under the joinery system (3 conveyor belts) EKP control, machine maintained. Facility immediately available, Location Germany, sale as visited.

General SKU244U279 LocationBarneveld MakeAllgaier-Werle GmbH TypeTSM 2000/2 No.2450 Year of construction1982 Main Features MaterialMild steel/Stainless steel Surface2.5 m2 Sizes diameter1850 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface± 2,5 m² Number of sieve decks:2 Sieve sizesDia: 1850 mm With covercheck InletDia: 300 mm OutletDia: 190 mm Drive excentercheck Motor2,2 kW,220/380 Volt, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4301 (304) Information Total height1,65 m Weight1000 kg Floor space2,4x2,1 mMinerals & inorganicPlastic & rubberTumbler screening machinesPlastic & polymersSolid pharmaceuticsOther feedRubberAnimal feedOther chemicalStarchSugarE-waste & metalOrganicsOther pharmaceuticsGeneric medicinesPowdered foodsConsumer wastePaper & otherFeed additivesAllgaierIndust ...

SECOND-HAND COPYING BAND SAW MZ MOD. UNIVERSAL 013 - CE RULES - motor Hp 7,5 - wheel diam. 840 mm. - copying device - max cutting length 1300 mm - max cutting height 100 mm - cutting angle +- 45° - waste conveyor belt SMA - SN 08 - year 2002

For sale is a used, complete baling press system consisting of a chain belt conveyor for underfloor operation, with steel substructure and pit cover, a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 13,100 x 2,550 x 2,780 mm (l x w x h) Machine weight baler ap ...

SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - mobile pressure system - right/left feeding - conveyor belt TSLR 6000X400 - n. 3 unloading tables mm. 1000x1200 - waste belt conveyor TSS 45° mm. 2500 - strapping machine SIVARON SS-80 - year 1997

Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER Manufacturer UAT UNIVERSAL AQUA TECHNOLOGIES INC USA Model TP 110K Year of production 2001 Capacity 12 000 L h Operating hours 9 810 Volts 380 Hz 50 Ph 3 Description of equipment MM FILTER INPUT WATER TREATMENT REVERSED OSMOSIS UAT UNIVERSAL AQUA TECHNOLOGIES INC USA 2001 DEMINERALIZED WATER TANK 12 m3 PUMPING BLOCK FOR MINERALIZATION MINERALIZER MINERALIZED WATER TANK PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Technological description of table water production a General The plant for the production of table water has a capacity of 12 000 l h It consists of Sand filter Device for reverse osmosis TP 110K Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation disinfection of min ...

Shredder for green waste, biomass, roots, bulky waste, waste wood, commercial waste, etc., equipment: radio remote control, hydraulic travel drive, overbelt magnet, auxiliary hydraulics, humidification for dust binding for external water connection, service and tools new. SPECIAL FEATURE: Engine original MTU- Mercedes NEW due to dust damage.

Key data: 980 mm, 980 mm

Working space LxWxH: 750 x 980 x 980 mm Door opening LxW: 640 x 740 mm Equipped with: - New work gloves - Blast gun - Waste plant Country of origin: Netherlands Connection: 380 Volt Machine LxWxH: 1000 x 1000 x 2000 mm Machine weight: 400 kg

Chopper/shredder/shredder to crush by Carpentry waste, carpentry waste, pallets and wood waste of many kinds. Propulsion: 15 kW Insertion dimensions: 800 x 1000 mm Workshop tested in good condition

Hopper agitator: FDE56N11-4, compactor: WP 50 N / 75, crusher: AL90SA-6, Granulator: LA71 AB-4, Elec: 380Volt 50Hz, Dimensions (mm): 1280x800mm H1540mm

Crushing machine for shredding joinery and joinery waste, as well as Wood waste of many kinds Insertion dimensions: 600 x 800 mm Propulsion: 18.5 kW Photo shows the machine as returned by customer

Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Comments: The documentation (Manual, CE ...

3pcs SDMO X880TD , MTU 12V2000 G65, year 2012, diesel, only 18h operating hours, plate heat exchanger for waste heat recovery 1pc SDMO X1000KTB, MTU16V2000, YOC 2007, diesel, only 29h operating hours, plate heat exchanger for waste heat recovery 1pc SDMO XS715, MTU12V2000, built in 2002, diesel, only 25h operating hours, plate heat exchanger for waste heat recovery

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

Technical data shredder: Manufacturer Vecoplan AG Type VAZ 1100 XL K Year of construction 2014 Operating hours 1,224 hours Electromechanical drive Drive power 37 kW Speed 160 rpm Rotor length 1,070 mm Rotor diameter 370 mm 48 cutting crowns 40 x 40 mm Machine dimensions without hopper 2,550 x 1,900 x 1,110 mm (l x w x h) Weight 3,1 tonnes Application description of the manufacturer: The Vecoplan VAZ® 1100 K XL Rotary Shredder is designed especially for size reduction of difficult industrial materials such as plastics, dunnage, wood scrap, medical waste, municipal waste, furniture parts, pallets, carpet, cardboard and paper. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Technical data single-deck ballistic separator for three separation fractions: Manufacturer Lubo Screening & Recycling Systems B.V. Type Elliptical 10EBB05 Year of construction 2015 Screening area 12.5 m², consisting of 6 screen paddles 400 x 5000 mm Weight 7,100 kg Note on the separation process: The Lubo Elliptical is a state-of-the-art ballistic separator. It separates the material stream into three fractions, heavier 3D fractions such as tin cans or PET bottles, lighter 2D fractions and screened fines. This ensures high separation quality for various waste streams such as mixed waste, packaging, mixed paper, film and cans. Condition of the machine: The Elliptical 10EBB05 ballistic separator is still in use at a large recycling company separating mixed waste until the 18th calendar week, when it will be replaced by a larger machine with a higher throughput capacity. The machine is in ...

Description: Technical details: liter output 20550/42 degrees Qa, coolant R134a/1430 refrigerator Pressure 20 bar, total power requirement 14.5 kW, additional information: The models in the HYFRA Gamma series are designed as immersion coolers for cooling water, oil and emulsion. The plug-and-play immersion coolers can be installed and can be used with an area requirement of just 0.5 m². This makes them very suitable for integration into various machine layouts. Outputs of up to 28 kW are available in just 0.5 m2 thanks to the compact design Stand space possible. This results in significant flexibility advantages when planning the production area layout and a significant increase in productivity because there is space for more producing machines. In the compact models of our immersion coolers, the condenser is installed horizontally. Thanks to this type of construction, the immersion coo ...

This MIKRON Multistar CX 24 Rotary Transfer Machine was manufactured in the year 2003 in Switzerland. It excels in accurately producing part families and intricate workpieces in large quantities. Its table index offers exceptional repeatability of ± 2.5 µm. With 24 stations equipped with up to 44 machining units, it ensures incredibly high output rates. This Rotary Transfer Machine located in Germany comes with loading station (brass D= 3.9mm), unloading station, part selector (8 compartment, see picture), lateral drilling unit, rotating straightener (October 2023 completely new in stock), feed / sawing unit (control and inverter overhauled in 2021), pneumatic loading (via feed pipe), chip conveyor with waste water pump, KNOLL coolant system (2,000 liters) with drum screen filter, flushing pump and vacuum pump including low-pressure pump (5 bar) and high-pressure pump (60 bar). Tai ...

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2014, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance ...

THREE KNIFE TRIMMER ZECHINI MODEL FIORINO -Year 2001 -Max trimmed size 380x330 mms.- Min size 170x120 mms. -Max thickness 50 mms., Min. 5 mms. -Electric power: 5 KW, Speed max 750 copies/hour -Total dimension : 2000x800x1650 mms., Weight : 800 Kgs. -Waste container capacity: 240 liters -Full automatic size change -Complete with in-feed system Zechini RAMPA Year 2001

Used Kosme Filling Monoblock Completely Refurbished in 2016 Introduction to the Kosme Monoblock The Kosme filler a filling monoblock with a 24 24 6 configuration for carbonated and still water stands out for its reliability and high performance capabilities Additionally this machine refurbished completely in 2016 and unused since then ensures optimal working condition Performance and Operational Capacity of the Used filling monoblock Kosme completely refurbished in 2016 This monoblock s operational capacity is remarkable it produces 9000 pieces per hour for 330 ml bottles demonstrating its versatility in handling various bottle sizes ranging from 50 mm to 105 mm in diameter and from 150 mm to 350 mm in height Technical Features of the Monoblock Among its key features the presence of an aluminum cap and an effective rinsing system are noteworthy Furthermore the monoblock comes equipped wi ...

New in stock: This powerful Sykes 100CP dirty water pump!, With its robust design and high-quality performance, this pump is perfect for various industrial and construction applications., , Thanks to its impressive capacity, the Sykes 100CP dirty water pump can effortlessly move large volumes of dirty water, making it ideal for quickly and efficiently pumping out construction pits, basements, and other areas where water is a problem., , With its reliable motor and durable construction, this pump is designed to deliver long-lasting performance, even under demanding conditions. Moreover, it is equipped with simple controls., , Dont wait any longer and upgrade your machine park today with the Sykes 100CP dirty water pump. Please contact us for more information., With these Sykes you are guaranteed high-quality performance for all your wastewater disposal needs!”, , Max Flow: 235 m3, Max P ...

Holtrop Jansma-AFS clean air extraction with compressed air cleaning, auger discharge, rotary lock, chip fan, return air with summer/winter gate valve and fire protection device Type: OSFS 185 Year of construction: 2005 (2015 new turnstile and new control system) Clean air extraction Suction supports: ø700 mm + ø700 mm Length: 3,500 mm Width: 2,300 mm Height: 6,200 mm (onderbak 2,700 mm + bovenbak 2,700 mm + 800 mm fans) Capacity: 21,000 m3 /hour Chip fans: 2 15 kW, 380V, 56 Amp, 10,500 m3/uur, 3,000 tpm, 3,850 Pa, Type: RL E 550130 Filter surface: 185 m2 Filter tubes: 150 stuks Length of filter tubes: 2,200 mm Diameter of filter tubes: 180 mm Cleaning: Compressed air cleaning Flame protection: Sprinkler installation with fire brigade connection Screw: HJ STH-380 12 tpm Turnlock: HJ ZRS-300, 31 tpm Hopper dimensions: 250350 mm Transport fan: Connection diamet ...

BBA BA100K D193, This diesel-driven 4 waste water pump is the best performing mobile pump set in its class. With a dirt passage of 82 mm, the chance of blockage is zero, even on the most polluted sewer jobs., The economical 1-cylinder Hatz diesel engine with DriveOn® technology guarantees minimal fuel consumption and long maintenance intervals., , Maximum 135 m3/h and head up to 17 mwk, Dirt passage 82 mm, , Can be supplied with any desired coupling/connection., , Throughput capacity: 135 m3/h, Max dirt passage: 82 mm, Motor brand: Hatz, Max. head: 17 MWK, Max dirt passag: 1500 rpm, Weight: 1300 kg, , = More information =, , General information, Year of manufacture: 2017, Applicable material: Water, , Weights, Empty weight: 1.300 kg, , Functional, Connector size: 4 Cardan, Cargo space capacity: 2.250 l, Quick coupler system: Yes, , Condition, Technical condition: good, Visual appearance ...

Description: Max. panel width 3200 mm Max. panel length 1200 mm No of Bottom Units 6 No of Top Units 4 Lateral horizontal groups , Automatic waste ejection system TOOLS NOT INCLUDED Approx. Onsite Dimension. (l x w x h): 1 x 1 x 1 mm, weight approx.: 1 kg

For cutting of cabbage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Kronen GS10 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2010, stands as a benchmark in food processing technology, offering unparalleled efficiency, precision, and versatility. This model seamlessly integrates cutting, washing, and blanching functionalities, catering to the diverse needs of modern food production facilities. Equipped with advanced cutting mechanisms, the GS10 excels in slicing vegetables and fruits with exceptional precision, ensuring uniformity and minimizing product waste. Its robust washing system utilizes state-of-the-art technology to thoroughly clean produce, removing contaminants and impurities to uphold stringent food safety standards. The blanching feature of ...

Overview of the equipment of a sorting plant, year of construction 2009, extension 2015, with a sorting capacity of 25,000 t/year For sale is a complete sorting plant for deinking paper, which can also be used for other materials. The plant consists of the following components: 1 piece feeding / dosing bunker with hydraulic moving floor and dosing drum, manufacturer Hartner, type Storage HAT 1 piece 3-deck ballistic separator, manufacturer Hartner, type Paper Sort 2 pieces overband magnetic separators, manufacturer IFE, type MEQL 1401 S-PS 2 pieces cascade screens (vibrating screens), manufacturer IFE, type SM 2400 x 5000 F - UW30 2 pieces TiTech Autosort, manufacturer TOMRA Sorting GmbH, type TITECH AutoSort 4 (NIR1-VIS) (S-2800) (X-L), incl. accelerating belts 1 piece sorting cabin with filter system, air-conditioned (heated), with 3 sorting belts and 10 sorting stations 1 piece ventil ...

For cutting of cabbage, lettuce, leafy vegetable, etc. High to medium capacity this extra information is standard for this model. Please always double-check the details during a visit The Eillert G3300VS Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 1995, marked a significant advancement in food processing technology. This model seamlessly integrates cutting, washing, and blanching functions, streamlining production processes for enhanced efficiency and quality. Featuring precision cutting mechanisms, the G3300VS effectively slices vegetables and fruits of varying shapes and sizes, ensuring uniformity and minimizing product waste. Its robust washing system thoroughly cleans produce, removing dirt, debris, and contaminants to meet stringent food safety standards. The blanching capability of the machine rapidly heats produce, halting enzymatic ac ...

For slicing of cabage, lettuce, leafy vegetable, etc. this extra information is standard for this model. Please always double-check the details during a visit The Eillert G1500 Vegetable and Fruit Cutting, Washing, and Blanching Machine, introduced in 2014, represents a pinnacle of innovation in food processing technology. This model integrates cutting, washing, and blanching functions, offering a comprehensive solution for commercial food production. With advanced cutting mechanisms, the G1500 excels in slicing vegetables and fruits with precision and consistency, minimizing waste and optimizing yield. Its robust washing system ensures thorough cleaning, removing contaminants and impurities to uphold the highest food safety standards. The blanching capability of the G1500 rapidly heats produce, effectively deactivating enzymes to preserve color, flavor, and nutritional integ ...

Iseki ZM 160 S, intermediate axle mower (belonging to carrier vehicle unknown), built in 2002, incl. accessories shown: discharge plate, lifting shears, lifting cylinder with lifting shaft and lifting arms. More mowers and grass pick-up technology available! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, environmental maintenance, engines and more...

Cleaning roll holder, floor stand, cleaning cloth roll holder -Manufacturer: Tork, floor stand for cleaning cloth roll with waste stand -Type: W1 -Roll width: up to approx. 450 mm -Number: 7x cleaning roll holder available -Price per piece -Dimensions: 710/590/H1010 mm -Weight: 8.1 kg/piece

Description: To participate in the auction, a deposit of €6,000.00 is required. The deposit does not constitute an advance on the balance of the winning price. The winning bidder-buyer must reimburse Surplex for supervision costs of €300.00 per day. Request information for deposit payment. Single lot composed of warehouse remains, site cleaning included at the buyer's expense. Please carefully read the procedures outlined in the description and adhere to them, as participation in the auction implies full acceptance. The removal of lots must take place within 45 days from the communication of final award, and the following operations are mandatory: 1. Complete removal and proper disposal of FERROUS materials, 2. Full floor cleaning of the shed, 3. Complete removal and proper disposal of NON-FERROUS materials, 4. The collection and proper management of any ordinary, special, haza ...

Albamat 550 V5 cardboard press with EKZ 1400 shredder RA2285 Type: Albamat 500 V5 / EKZ 1400 Year of manufacture: 2019 Condition: used Optical: traces of use Height: Press: 4450 mm without housing, 5550 mm with housing Width press: 2350 mm Depth press: 5613 mm Pressure: 60t / 600 kN Recommended maximum carton size: 960 x 630 x 420 mm. Depending on the housing, longer cartons are also possible Shredder feed opening 1435 x 990 mm Motor power: 22 kW baler, 1.1 & 7.5 kW shredder. Bale size: 1050 x730 x 1200 mm (depending on filling) Cycle time: 25 s, 3.3 t/h at 35 kg/m³ Dead weight: 8500 kg baler + 1000 kg shredder + feed hopper Start of baling process: Photocell Bale tying: 5 x 3.1-3.8 mm wire, fully automatic including: Oil cooler and oil heater for outside temperatures Free pusher Feed belt control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, German ...

Description: Daewoo floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L Connection voltage 230 V Battery 24V / 100Ah Brush diameter 510 mm Speed 175 rpm Suction power air 24 L / s Tank volume 50 / 50 liters Weight 160kg Dimensions L-W-H 1.1 x 0.52 x 1.0 m weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,100 x 520 x 1,000 mm

Clamping unit Clamping force350 ton Opening stroke675 mm Distance between tie bars630 x 630 mm Mould height min.330 mm Mould height max.710 mm Platen size (h x v)950 x950 mm Injection unit Screw diameter70 mm Injection volume1212 cm³ Shot weight1090 g Injection pressure1877 bar Measurements and weight Dimensions6,5 x 1,9 x 2,2 m Machine weight 16000 kg this extra information is standard for this model. Please always double-check the details during a visit The DEMAG Ergotech System 3500-2300 NC4 Injection Molding Machine, introduced in 2002, exemplifies precision and efficiency in plastic molding technology. Renowned for its advanced features and superior performance, this model has become a cornerstone in the injection molding industry. At its core, the Ergotech System 3500-2300 NC4 excels in injection molding operations with unparalleled accuracy and speed. ...

Combitrailer / mowing container for mowing / mulching while simultaneously picking up grass, leaves, undergrowth, horse droppings, etc. Heavy, robust design: combination of tipper chassis and flail mower in front with height-adjustable trailing roller, working tools blade flail, working width 1.80 m, container volume 11 m³, hydr. High emptying as well as floor emptying possible by means of rear wall swing flap. Hydraulically height-adjustable traction device, with overrun brake. PTO drive 540 rpm, power requirement min. 44.4 kw/60 hp. Other combi trailers with working widths of 130 and 150 cm, also machines from other manufacturers available - ask us! ------ Jodau Municipal, Environmental & Green Maintenance Technology ------- Used machines for plant and sports field maintenance, gardening and landscaping, cemetery technology and winter service, sweeping and waste disposal, envir ...

manufacturer: GMM model: INTEC I 713 G-2 Year of construction: 2021 condition: as good as new (used) Operating hours: 450 h Repeat accuracy: 1 mm Working range: 4,500 mm Traverse path X-axis: 4,200 mm Traverse path Y-axis: 1,500 mm Z-axis travel: 200 mm Positioning accuracy: 1 mm Workpiece weight (max.): 2,000 kg Type of input current: three-phase Motor power: 35.000 W Input voltage: 380 V Aluminium sheet thickness (max.):120 mm Table length: 4,200 mm Table width: 2,500 mm Tank capacity: 5.000 l Pressure 4.55 bar Positioning speed: 102 mm/min Rapid traverse X-axis: 12,500 mm/min Rapid traverse Y-axis: 12,500 mm/min Rapid traverse Z-axis: 2,000 mm/min Table height: 860 mm Operating pressure: 4,550 bar Input current: 60 A Table load: 2,000 kg Accuracy travel dimension: 1 mm Year of last overhaul: 2024 Total height: 3,500 cm Total length: 5,800 cm Overall w ...

Key data: 4000 mm, 1300 mm, 270 mm

SPECIFICATIONS: Working Area X: 4000 Working range Y: 1300 Working range Z: 270 C-axis Tool changing stations: 24 Copy milling unit Refrigeration unit Double-sided drilling unit for drilling locks Main motor power KW: 11 Work table: 8 controlled rails Waste conveyors Xilog Plus PC Software Control Vacuum pump capacity m³/h: 250 Protective Weight approx. kg: 5000