wast recycling plant used for sale

Description Lot 3 - MOGUL KITCHEN 2 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel, Pumps. Associated controls, pipework etc

Description Lot 4 - MOGUL KITCHEN 3 TER BRAAK Cooking Set Up. Including Control Panels, Vacuum Vessel, Cooking Vessel, NEWADE Outfeed Vessel (1988), Pumps. Associated controls, pipework etc

Description Lot 6 - BATCH FLAVOUR & COLOUR MIXING ROOM With a quantity of stainless steel mobile holding tanks, batch weigh station with pumps and Silverson Batch mixer on floor mounted frame for secondary mixing prior to distribution to production

Description Lot 7 - MOGUL PRODUCT REWORK Mogul Product Re-Work System with WINKWORTH Rework Dissolving Tank from year 2013, Pipework & Pumps, NEWADE Stainless Steel Vessel from year 1988. Allen Bradley PanelView controls

Description Lot 9 - STARCH MOGUL LINE Manufactured by NID (no machine plates.) without Depositing Heads. With mould loader and unloader, with Starch Feed Tipping Station with Product Outfeed Conveyors & Candy Cleaning Conveyors. has been rewired quite recently. DCE Units, Control Panels

Description Lot 10 - STARCH MOGUL LINE Manufactured by NID Model M3000. without Depositing Heads. With mould loader and unloader, with starch loader, with Product Outfeed Conveyors & Candy Cleaning Conveyors. Allen Bradley PanelView 1000 & Plus 1250 controls DCE Units, Control Panels (Was running with Vomatec cooking/flavouring system lot #11)

Description Lot 15 - SUGAR COATING LINE with product was hand fed from trays into an infeed station where different colour/flavour products were mixed product infeed conveyoring BUHLER separator/ vibrators with extractor for product cleaning into a Raw Sugar Infeed Conveyor/System (from bulk bags), large Sugar-Coating Drum, Inclined Conveyor to Oil Enrober with preparation kitchen where product is coated after sugar drum before further conditioning (which was a product specific requirement).

-Sale by owner AT THE CAMP ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobile: +43-664-3358378 office@machines-plants.at www.machines-plants.at for fully automatic packaging of block and bricks in Special design for stacking and setting up concrete elements Drive: Electro-hydraulic, wheels of the clamfore truck made of Vulkollan Stacking device: All-wheel steering with + 90 0 steering impact from straight line. Control: PLC from Siemens The respective stowage inserts are detected by light barriers Hydraulic: Gear constant pump, ultra-fine filter in high-pressure circuit, return filtering Front and rear wheels can be steered separately or separately. Maximum stacking height of the forklift 1,250 mm Special gripper clamp, in which a complete stoare is held and can be handled, a set of gripping jaws for hold ...

-Sale by owner our used lines meets after reinstallation by us the Definition RETROFIT COMPLETE equipment, incl. Filzmoser straightening system if you are interested, please request an offer Plans, pictures and CAD drawings are available, without mixer, ready for loading, Filigrandecken and double-walled movement, Filzmoser straightening system with robot. ErICH PETER MACHINES-PLANTS GMBH is engaged in complete solutions for the Realization of construction projects according to EU standards. They are not a construction company, but convey the required knowledge in theory and practice to plan, calculate and implement construction projects. Offers include: • Creation of business, master and execution plans • Sale of various machines and equipment for the production of building materials and prefabricated parts • Commissioning of the plants and personnel train ...

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Precast Modular House Machine, Low Cost Precast Concrete House our used lines meets after reinstallation by us the Definition RETROFIT ERICH PETER MACHINES-PLANTS GMBH A - 7083 Purbach - Austria Mobiltel.: +43-664-3358378 office@machines-plants.at www.machines-plants.at Affordable housing Low-cost housing - Hotels - housing estates - residential developments - residential areas & complexes – single housing – low cost housing Günstige Häuser - Low-Cost-Häuser, - Hotels - Wohnsiedlungen - Entwicklungen v. Wohngebiete und Komplexe - Einzelhäuser - preiswerte Wohnungen Cmodul-3D Austria we can offer NEW also C Module dim. 3000 mm x 6000 mm (c-module)NEW MOULDS Affordable houses - low cost living space Low cost housing I am proud to introduce now our improved system for the construction of affordable houses. S ...

Four nearly new moulds for garden wall and fence.

C-Module AUSTRIA ERICH PETER MASCHINEN-PLANTS GMBH A - 7083 Purbach - Austria office@machines-plants.at www.machines-plants.at Affordable housing, affordable houses, Hotels - Residential complexes - Residential complexes - Detached houses - cheap houses we have sold our used ones, we also offer NEW C-Module 3000 mm x 6000 mm NEW FORMEN Cheap houses - cheap apartments I am proud to introduce you to our improved system for building affordable homes. Especially for villages and small towns. But hotels have already been built in this way - we can do all the planning for them. A useful system also for stairwells, corridors and elevator shafts - easy to manufacture. It is a modular system, but still flexible in the size of the room and in the positioning of the windows and doors. Connecting to other materials such as wood, glass and concrete slab is easy. Th ...

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

Precast Modular House Machine, Low Cost Precast Concrete House ERICH PETER MACHINES-PLANTS GMBH deals with complete solutions for the implementation of construction projects according to EU standards. We are not a construction company, but give the required knowledge in theory and practice to plan, calculate and implement construction projects. Business offers: ? Creation of necessary business, master and execution plans ? Sales of needed machines and plants for building material production ? Precast plant supply (new or refurbished) ? Plant commissioning and personnel training ? Concept & design for precast concrete projects as well as for multi-story wood structure buildings 5 key arguments: ? High speed buildings with short realisation time very important in all markets. ? High quality mainly in precast realised (minimized human failure) ? Low c ...

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

NANO FILTRATION & REVERSE OSMOSIS PLANT USED FOR WHEY CONCENTRATION FEED CAPACITY: 20.000 LITER PER HOUR OUTLET: 22 % SOLID RATIO ALFA LAVAL AND FRISTAM PUMPS VERY GOOD MECHANICAL CONDITION YOM: 2002

ULTRAFILTRATION PLANT CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, LABNE CHEESE, FRESH CHEESE, CREAM CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE ...ETC PRODUCTIONS FULLY AUTOMATION CONTROLLED WITH HMI

NANO FILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

A complete power plant consisting of 3 JEBANCHER units is now available. Below are the details: 2x Engines Model J616C - Power: 2519 kVA (2.519 MW each) - Overhauled (E60) in 2011 - Operating hours since overhaul: 20,503 hours - Manufacture date: 1997 - Serial numbers: 1200959 / 1200956 1x Engine Model J320 GS S04 - Power: 1366 kVA (1.366 MW) - Overhauled (E60) in 2011 - Operating hours since overhaul: 19,059 hours - Manufacture date: 1997 - Serial number: 1200954 Total power capacity: 2 x 2.519 MW + 1.366 MW = 6.404 MW Scope of supply includes: - XT3 Diane control panel - GEC ALSTHOM transformers: 3 units (2x 2500 kVA, 1x 1600 kVA) - Gas line - Heat exchanger - Smoke exchanger - Pumps - Table cooler (radiators) - Oil tank Location: Paris, France For more information, please feel free to contact us.

ID3500 Crushing plant for the production of frost protection Crushing plant for the production of frost protection Crushing plant for the production of frost protection consisting of: 1) Humboldt - double knee crusher Type: BDG 900 x 700 Jaw width 900 x 700 2) Pfister vehicle scale type TAW 30 Maximum load: 30 tons Bridge size: 8 x 2.5 m Standard printing unit as a recording device 3) Steel sheet silo for individual installation 4 supports made of IP beams Total height 8 m, clearance height 3 m Outlet 600 mm, silo closure as a flat slide with rack adjustment and handwheel operation. An electric vibrator was subsequently attached to the outlet. 4) SBM impact grinding mill type PMM 10/6/4 export 5) Push-cart feeder type SW 1000 x 4000 with inlet hopper for the crusher 6) Existing conveyor belts 7) Screening system Parts lists and purchase invoices are available for mo ...

Milk Pasteurisation Set With Seital Separator 2000-3000[tel:2000-3000] L/h Description This Combined GEA VT 10 pasteuriser with Seital Cream Separator was used on Cheese and Fresh milk products. This is ideal for a small/medium sized dairy wanting to move away from manual cleaning separators and Bach Pasteurization process gaining time, efficiency and product quality . Having a cream separator opens new markets for the dairy such as butter, cream, clotted cream, skimmed milk and zero fat milk products are some of the opportunities. Pasteuriser Make : GEA Model : VT 10 Year of Manufacture : 2005 S/N : 169/15597[tel:169/15597] Temperatures: Shown in Chart Hot Water inlet PHE Balance Tank Temperature Valve regulation Diver Valve for non pasteurised product Chart Recorder Product pumps Water Pump Stainless steel skid mounted for quick installation Con ...

ID3825 Gravel washing plant / Kieswaschanlage year/Year of construction approx. 1996 Gravel washing plant, comprising: 1 single-deck washing screen (5.00 m x 1.70 m), 1 Fiebig twin-shaft log washer (6.00 m x 2.00 m), 1 double-deck washing screen (3.00 m x 2.00 m), 1 Stichweh dewatering bucket wheel (3.00 m), 1 single-deck scalping screen (3.20 m x 1.00 m), 1 container with 2 control cabinets, 1 container with Iveco generator set (175 kW, 2,900 hrs, AVK generator 200 kVA), 2 conveyor lines (length 90 m, belt width 0.65 m), 1 inclined conveyor (length 40 m, belt width 0.65 m), 1 inclined conveyor (length 20 m, belt width 0.65 m), 4 stockpiling conveyors (length 20 m, belt width 0.50 m), 1 double feeder (9.00 m x 2.50 m), 1 feeder conveyor (length 17 m, belt width 1.00 m), water pump on pontoon (suction line 200 mm, discharge line 150 mm), 1 discharge line (150 mm poly pipe, approx. 100  ...

System Plant transport belt, steel frame, plastic roller belt, belt width: 360 mm, total dimensions: 4050 mm x 700 mm x 1140 mm.

We can offer 2 complete BCF spimming lines, eachline has 6 positions, manufactured by Plantex, Italy in 1996, can produce PP, PA yarn, 1~3 color, 1000~4000d, working condition. Seriou buyers contact us.

GEA Complete UHT Plant For Sale Item #: Usm-154 Category UHT Plants GEA UHT Plant For Sale

GM 1207 thermal oil plant consisting of: 4 wagon ovens 1 central heating system with gas burner Total baking area: 48 sqm Manufacturer: MIwe Year of construction: 2002 Condition: very good dismantled in stock Pratteln Specifications: 4 trolley ovens for 2 baking trolleys each with 10 supports Baking area per oven: 12 sqm Central heating system: Gas, 350 Kw 18 baking trolleys with 10 pads for: Baking trays: 600 mm x 1000 mm Footprint per furnace: W 1600 mm x D 3100 mm x H > 3000 mm Side by side: W 8000 mm x D 3100 mm x H 3000 mm

Make : Armfield Capacity : 40 litres Mixing : Silverson Mixer Processing vessel with cooling Usage : Pasteuriser and mixing vesle Model: FT 40 Make : Armfield Model : FT 75 Usage : Crystaliser Pin mixer Single tube Usage : Margarine and ice cream Make : Armfield Model : UHT Usage : UHT Pasteuriser All in excellent condition came out of university in UK

ID2953 Henke Variant year of construction 1992/93 Brick Manufacturing Plant with core and attachment, for the production of paving stones, slabs, kerbstones, U and L stones, hollow blocks Board size 1,350 x 1,150mm (approx. 1935 piece) Min. product height 40 mm Max. product height 500 mm Drawing plate function and cross-punch cleaning Vibration HENKE Vibra-Matik with 4 servomotors SEW Renewal of the machine control in 2011 to Siemens S7-400 incl. Board destacking device wet side incl. Conveyor line wet side (V-belt and intermediate chain transport) incl. Conveyor section on the dry side (latch track and lowering ladder outlet) incl. Board turning cross dry side incl. Board stacking device dry side incl. Board package lift truck with transverse traversing platform (board storage) incl. Packaging HENKE incl. drying chamber The machine is in good working condition and can ...

ID3355 Grit Plant/Split Plant year/Year of construction 2002 Grit plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16 Split plant, capacity approx. 30-50 t/h, consisting of: oversize feed (feed hopper), Svedala cone crusher, feed belt, discharge belt, Ammann screening plant, oversize feed, end product: 0/3, 3/8, 3/16

We are offering for sale a complete mobile screen plant with trailer : Trailer Type: ZAL 4PA Towing capacity: 47,000 kg Own weight: 8,600 kg Conveyor Belt Type: ML-Band Year of Manufacture: 2012 Screen Type: SEWU 2400 x 5000 Year of Manufacture: 2012 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used Tubular UHT Plant – Alfa Laval M10-MFMC (6,500–13,000 l/h) Industrial tubular UHT processing plant designed for the thermal treatment of dairy products such as UHT milk and UHT cream. The Alfa Laval tubular UHT system provides reliable sterilization and continuous processing suitable for medium to high-capacity dairy production. General Information - Manufacturer: Alfa Laval - Sterile Tube Type: M10-MFMC - Year of Manufacture: 1989 - Condition: Good used condition, serviced Technical Specifications - Production Capacity: 6,500 – 13,000 l/h - Maximum Temperature: 137 °C - PLC System: SIEMENS S5 Recent Area of Use - The plant has recently been used for processing: - UHT milk - UHT cream Key Advantages - Reliable Alfa Laval tubular UHT technology - Suitable for continuous sterilization of dairy products - Flexible capacity range 6,500–13,000 l/h -  ...

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

Jordan MK1 High shear mixing plant Stainless, 100L high shear mixing plant, mayo plant, variable speed high shear mixer, 4Kw, steam jacketed vessel, with Johnson lobe pump outfeed, variable speed pump, mobile, 3Ph

This 2015 TOMSA DESTIL Alcohol Dehydration Plant is designed for the large-scale production of high-purity ethanol. It processes distilled alcohol (95.5% v/v) into dehydrated alcohol with up to 99.8% v/v concentration, suitable for beverages, industrial applications, or biofuel. The plant has a nominal capacity of 90,000 liters per day and operates with advanced molecular sieve technology using pressure swing adsorption (PSA), ensuring high efficiency, low energy consumption, and fully automated operation. Condition & Usage The plant was barely used and only produced 2,000 m³ of dehydrated alcohol during its operation, leaving the equipment in excellent condition. Key Features - Capacity: 90,000 L/day dehydrated alcohol (99.8% v/v). - Feedstock: Distilled alcohol at 95.5% v/v. - Technology: Molecular sieve dehydration with PSA system. - Fully automated and continuous operation. Fi ...

Syngas Gasification Plant Caterpillar 5 generators G3516 1375 KVA 3 boilers, 1 turbine transformer cell, dry cooler, compressor . complete installations year 1997 in new condition all installations less than 500 hours

3. J616GS E 02 Engines (3 units) 2000 kW Power: 2700 kVA Stamford alternator General overhaul at 30,000 hours Operating hours since overhaul: 36,000 Year of manufacture: 1999 1. J616 GSC 01 Engine (1 unit) Power: 2700 kVA Stamford alternator General overhaul Operating hours since overhaul: 40,000 Year of manufacture: 1997 Scope of supply: Diane control panel ALSTHOM transformers (4 units: 4x2500 kVA) Gas line Heat exchanger Fume exchanger Pumps Table cooler - (Radiators) Oil tank

Technical Conditions - Application: Outdoor, temperature range –10°C to +40°C, weather-protected - Operation: 8 hrs/day, 1-shift (06:00–18:00) - Material: Pre-sorted KVA (waste incineration slag), 0–500 mm, mixed with wood, plastics, metals, dry - Capacity: ~5 t/h (max. 10,000 t/year) - Foundation: Concrete floor with steel structure Main Components - Feed Bunker with Vibrating Feeder (SFLU 800-2505000) - Input: KVA slag, up to 500 mm - Capacity: 5.0 t/h - Wear-resistant lining (similar to Hardox 400) - Weight: ~5,000 kg - Belt Conveyor FB 1,000 RB (3,000 mm) - Incl. magnetic separator integration - Permanent Overband Magnet Separator (IMP Z-120) - Removes ferrous metals - Sorting Belt Conveyor FB 1,000 RB (6,500 mm) - With hand-sorting section - Belt Conveyor FB 1,000 RB (4,000 mm, swivel type) - Swivelling discharge, manual adjustment - Steel Sorting Platform / Wal ...

The plant consists of two production units: Production Line B and Pre-Mix Unit 5 (MA5). PRODUCTION LINE B Production Line B is a complete nonwoven needlepunch line consisting of the following components listed in process order. 1. Suction / Filter Station (Filterstation) Function: Fiber dust extraction and air filtration for the production line. 2. Feed Shaft Manufacturer: Spinnbau Bremen Machine length: 3,970 mm Machine width: 2,600 mm Machine height: 6,233 mm 3. Belt Scale with Vibrating Shaft - Protec Vibrating Shaft: Length: 880 mm Width: 2,800 mm Height: 1,500 mm Weight approx.: 870 kg Belt Scale: Length: 550 mm Width: 3,000 mm Height: 700 mm Weight approx.: 550 kg Power supply: 3NAC 400V 50Hz 20A Description: The vibrating shaft produces a uniform fiber feed. The belt scale measures the weight of the fiber material being transported and regulates the feed spee ...

General SKULY003 MakeAlfa Laval TypeAlfaFlash MVR system Main Features MaterialStainless steel Motor110 KW Surface1.1 m2 Specified Features - Film evaporator Max. temperature110 °C With variable speed drivecheck With condensercheck MaterialStainless steel 1.4401 (316), Titanium General No.DE21-1026 Year of construction2021 With switchgearcheck Extra SpecificationsThis machine (Elemetal Zinc Sulphate MVR System) is an evaporation/crystallization unit that concentrates zinc sulphate solution past saturation so zinc precipitates as ZnSO₄·1H₂O crystals. The crystals are then separated from the mother liquor in a decanter centrifuge, producing a solids cake for downstream drying and clean condensate that can be reused.&:nbsp:The complete plant/module consists of (main machines/equipment):Feed section: feed pump and feed preheater:Feed to the module: 1065 kg/h, 50°C, 2 ...

This skid mounted pilot pasteurisation plant exisiting out of a inline filter, feed screw pump (Bominox - type RS-22/M - 0,75 kW - n2: 250 rpm), level tank of ± 100 liter (internal diameter 45 cm, internal height 70 cm) with mix agitator (0,18 kW - 665 rpm), pre-heater (tubular heatexchanger), homogeniser (FBF 001), 2x tubular heaters, holding, 2 tubular coolers and a double jacketed ripening tank of ± 250 liter (internal diameter 70 cm, internal height 63 cm) with propellor agitator (0,37 kW - n2: 50 rpm). The pilot pasteurisation plant is previously used for ice cream mixture and only run for 357 production hours., The unit can be used for all kind of different combinations for pasteurisation and homogenising of liquid products, by making different connections on the flowplates., Homogeniser details:, Manufacturer: FBF Italia, Model: FBF 001, Serienr: 06031808, Year: 2006, Max. capac ...

Tetra Pak desserts pilot UHT plant with an pasteurisation, indirect and/or direct (VTIS) heating module @ 225 ltr/h and only a pasteurisation step @ 125 ltr/h, previously used in a R&D centre for desserts., Indirect unit, skid mounted, including:, - Open level tank, serial number: DFB-5259-BT01, year 2008, 50 ltr with propellor agitator (Lightnin ECL-M59-25)., - Feed pump (mono / screw pump, Netzsch, NM031BH02S12H, serial number 387231, year 2007, 120 - 300 ltr/h, speed 20 - 80 rpm, discharge pressure 2 bar, product temperature 5 - 20 °C)., - Lobe pump, Alfa Laval, SRU1/005/LD, serial number 431441, year 2008, motor: 0,37 kW, 400 V, 50 Hz, n1: 1.360 rpm, i: 15,57 n2: 89 rpm., - Heating module A, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17997., - Heating module B, centrifugal pump: Alfa Laval FM-0/95, serial number: 31457-17999., - Heating module C, centrifugal pump: Al ...

Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...

This Anthracene and Carbazole Purification Plant is a complete industrial rectification and crystallisation system for the production of purified carbazole and anthracene from crude anthracene.The plant offers high-purity output with a design capacity of 2,600 tonnes per year of carbazole and 3,600 tonnes per year of anthracene, making it a proven solution for buyers of used chemical purification equipment. Manufacturer: NJR Type of Machine: Anthracene and Carbazole Purification Plant Design Capacity: - 2,600 t/a Carbazole - 3,600 t/a Anthracene Output Quality: - Purity of Carbazole: greater than 97.0% - Purity of Anthracene: greater than 95.5% Production Process — Three Steps: - Step 1: Crystallisation - Step 2: Rectification - Step 3: Solidification (Granulation) Process Description: - Crystallisation: Static layer crystallisation, 3-stage process. Cooling plates suspended  ...

The Tetra Pak Almix - Scanima Pilot Plant Mixer SPM-100 is a versatile vacuum processing system designed for pilot plants, product development and small-scale industrial production. It combines vacuum mixing, powder induction, high-shear homogenisation, heating, cooling and automated recipe control into one compact unit, making it ideal for producing a wide range of dairy, beverage and food products.The mixer is equipped with an integrated vacuum system that creates a controlled vacuum inside the vessel before and during processing. Operating under vacuum significantly improves powder incorporation by eliminating air, reducing foam formation and preventing oxidation. Powders such as milk powder, proteins, starches, sugar, cocoa, stabilisers and emulsifiers are drawn directly into the liquid through the integrated powder funnel, ensuring rapid wetting and lump-free dispersion while minimi ...

General SKU226Y116 LocationBarneveld CEcheck Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1200 Ltr. Motor35 KW Specified Features - Processing vessel Closed stirring vesselcheck Capacity400 l. (580 l.) Vessel sizesø 880 x 1320 mm Dished bottomcheck Dished top sidecheck With jacket45 l. Max. temperature140 °C, Jacket: 180 °C With paddle stirrerHydrolysis stirrer Motor4 kW Speed mixing shaft7—84 rpm With homogeniserConti-TDS Motor22 kW, 300—3600 rpm MaterialStainless steel 1.4404 (316L), Stainless steel 1.4435 (316L), Stainless steel 1.4571 (316Ti) With jacketcheck General MakeYstral SerialY-PS 638134 TypeYstral Process System Year of construction2009 With switchgear(as is) Floorspace5,40 x 5,00 m Total height3,60 m Weight7000 kg Extra Spe ...

General SKU226Y118 MakeGEA Wiegand Serial354320.90-1 Main Features MaterialStainless steel Specified Features - Miscellaneous filter MaterialStainless steel 1.4404 (316L), Stainless steel 1.4571 (316Ti) General Year of construction2015 LocationBarneveld Floor space3,19 x 1,27 m Total height1,92 m Weight800 Extra SpecificationsMain components—&:nbsp:One sanitary process/buffer tank (524 L, unpressurized, closed design, with cooling jacket, spray ball for CIP, DN200 hand-hole), with magnetic stirrer, 0,55kW, 400V, 369rpm— One closed-loop RO membrane unit, product-contact parts in stainless 1.4404— Feed pump, 200 µm edge-gap strainer, tube-bundle heat exchanger (loop cooler), one 3838 membrane housing, control and sampling valves, safety/relief valveFlow rates—&:nbsp:Feed pump (41P01): max 1,200 L/h (~1.2 m³/h at 55 bar)— Loop pump (01P01): max 15,000 L/hPressure  ...

Manufacturer: Scheugenpflug Type of machine: Casting and potting plant line Year of manufacture: Individual components dated 2022 and 2023. Operating history: The system was in operation from approximately August 2022 until the end of 2023 and ran without problems until the line was shut down The line is composed of the following main components. 1. Potting cell with axle system - Type: CNCell - Built in 2022 - Air pressure: 6 bar - Power supply: 400V 3~/N/PE. - Power frequency: 50/60 Hz - Power input: 8.6 kVA - Rated current: 13.8 A - Control voltage: 24 V DC 2. PTS preheating oven - two lanes - Type: FC Curing Oven FC-5Z-57-P-2S-6050-100 - Year of construction: 2022. - Nominal temperature: 100 degrees Celsius - Throughput time can be individually adjusted. 3. Barrel stirring station - Type: Barrel Agitator Station - Built in 2023 - Weight: 800 kg - Air pressure: 6 bar - Power ...