washing machine used for sale

Glass and drying plant Lisec type VHW-20/6 Specifications: • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 • Cleaning brushes: 4 front and 4 rear

1 BRÜCKNER open width washing range type SCOUT TR 3/3, year 1995, fully overhauled by BRÜCKNER in 2010 with new software and SIEMENS 15" touch screen, 6 compartments (3 with rotary washers + 3 dwell compartments)

Manufacturer: WEBEN / CEEVER Application: Automated part handling after upstream press (press not component), washing, drying and quality control Description: The system is an automated system for removing and transporting parts from an upstream press. Robots take over the parts, guide them through an industrial washing tunnel (wet cleaning) via a conveyor and transport system and then through a control/measurement system for quality inspection. The entire process chain is designed for a continuous process and combines robot handling, washing process, conveyor technology and automatic quality decision (OK/NOK). Technical Data – Washing Tunnel Year of Make: 2021 Cleaning process: spray-spray (water-based), air blow-off, hot air drying Max. workpiece dimensions: length 1400 mm Max. workpiece dimensions: depth 2000 mm Max. workpiece dimensions: height 10 mm Max. workpiece  ...

A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless  ...

workpiece weight per basket: 0 basket dimensions: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece weight per basket: 0 basket dimensions: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump  ...

weight: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Complete line for washing/sterilising/filling/sealing/labelling/stretch-banding open funnel/stem cut ampoules made of glas, consisting of: • Bosch RRU 3063 washing machine • Bosch HQL 2220 sterilising/pyrogenising tunnel • Filling/capping machine Bosch ALF 4060 • Labelling machine Bosch ERS 2010 (500) • Folding box cartoning machine Bosch CUK 1060 for 12 ampoules/carton • Skinetta ASK 450-bU banding machine • Output max. 18,000 ampoules/h depending on size: - 1 ml, 18,000 ampoules/h - 2 ml, 18,000 ampoules/h - 3 ml, 16,800 ampoules/h - 5 ml, 13,500 ampoules/h - 10 ml, 9,900 ampoules/h - 20 ml, 6,000 ampoules/h • Capacity for ERS 2010 max. 30,000 ampoules/h • With format parts for 1 ml ampoule Ø 10.75 x H 65.0 mm (unfilled, open), H 45.0 mm (filled, closed) • Menu languages English, Mandarin • PLC Siemens S7-300 • Danfoss VLT 2800 servo inverter • CE decla ...

An essential ingredient for removing impurities from the material. With a specially developed rotor with replaceable blades, high friction is generated at the target fraction and thus ensures thorough cleaning. Maintenance hatches on both sides allow easy access to the interior. The housing and the screens underneath are made of stainless steel. A support frame is included as well as inlet and outlet nozzles for the water. More information on request!

Used green bean slicer from the French company Femia type C 32. The machine cuts beans to a length of 26.32 or 36mm. Cutting length capacity 2-2.5 T/h. Acid-resistant design. 5 pieces available.

Used root vegetable washing and peeling line with a capacity of about 5 T/h The line includes: DRUM WASHER WITH ELECTRIC MOTOR. - TYPE LTJ-840 DL.3600,WIDTH 1100,H.1950, Manufacturer: GATINEAU FRANCE, Year: 1980 Flat conveyor SCREW POWER PEELER WITH MOTOR. ELECTR. - TYPE YAI1056 BE A6/1 DL.5200, Manufacturer: GATINEAU FRANCE Year: 1980 STEAM PEELER WITH MOTOR. ELECTR. - TYPE PVR-900L DL.3000,WIDTH 2000,HEIGHT 5750, Manufacturer: GATINEAN FRANCE Year: 1980 OUTPUT SCREW WITH PEELER WITH ELECTRIC MOTOR - TYPE YAI 1056 BEA4/1 DL.7500, Manufacturer: GATINEAU FRANCE Year: 1980 Brush wipes 2pcs Inspection Conveyor

Gravel washing plant - complete plant - = Capacity approx. 150 to/h consisting of: - Feeder - Scoop wheel - Sword Wash - Riser belt with pre-screening and washing system

Washing and dewatering screw, conveyor screw, transport screw, screw conveyor, conveying technology, pipe conveyor screw, trough conveyor screw, trough conveyor screw -Conveyor screw: Washing and dewatering screw -Version: Stainless steel -Drive motors for augers: 2 units, 3 kW, 60 rpm -Conveyor screws: Ø 510 mm -Auger pitch: 4100 mm -Inlet/Outlet: mm -Number: 2 washing and dewatering screws available -Price: per piece -Dimensions: 2090/5460/H2180 mm -Weight: 2180 kg

An industrial Hobart conveyor dishwasher is available. Heating: electric, conveyor width: 612mm, conveyor height: 440mm, working height: 920mm, conveying direction: left-right, total connected load: 81kW, water fill volume: 340l, water pressure range: 1.5bar-10bar, DI water consumption: 220l/h, DI water temperature: 12°C, water hardness: 3°dH, conductivity: 80µS/cm, total machine exhaust air: 1500m³/h. Machine dimensions X/Y/Z: approx. 7550mm/1200mm/2150mm. Documentation available. An on-site inspection is possible.

workpiece weight per basket: 250 kg basket dimensions: max. mm voltage: pneumatisch weight of the machine ca.: 400 kg dimensions of the machine ca.: 1,35 x 1,50 x 2,35 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with osmosis device, oil separator and drip pan Dimensions: width x depth x height = 4.1m x 7.1m x 4.1m (double bottom tray) Workpiece for machining max.: width x depth x height= 1m x 5.2m x 2.1m

BABCOCK washing line Year: 1990 Footprint: Length: 34 m Width: 5 m Washing line composed of: J BOX type inlet accumulator Impregnation scarf with booster 1 spray chamber with 45 m fabric capacity 5 Convitex bowls fabric capacity 22 m 1 Convitex double compartment tank fabric capacity 31 m Wumag dryer column with 16 dryer cylinders and 2 cooling cylinders Output battery type Jbox 1 Visiting Table 1 sewing bench 1 tangential outlet reel Auction-ID: A1-48824-160

SYSTEM CHEMISTRY - T 50 Stock number 1039-9447 Car Wash - Diving Manufacturer SYSTEM CHEMIE Type T 50 Year of construction 1975 Country of origin Germany - Plunge pool dimensions: 585 x 385 x 500 mm - Drainer dimensions: 400 x 375 mm - 2x shelf compartments dimensions: 400 x 350 x 210 mm Technical details: Capacity approx. 250 l Basket dimensions 560 x 260 x 40 mm Space requirement approx. 1.25 x 0.70 x 1.20 m Auction-ID: A7-49608-28

Complete AquaMax 2K Bundle Microplate Washing System from Molecular Devices. Complete package for research, biotechnology or pharmaceutical laboratories for precise and automated washing of 96-well microplates. Bundle contents: 1 AquaMax 2000 Microplate Washer – Art. No. P/N 0310-5363 1 x AquaMax 2000/4000 96-plate wash head – P/N 0310-5216T 2 x 4 litre bottles with level sensor – P/N ref 5000802 1 x 10 litre waste tank – ref. SK 20462 / P/N 9000-0296 Features: Automated and accurate washing of 96-well microplates Liquid level sensors for safe use Complete ready-to-use package Purchase value: €30,000 Auction-ID: A1-49938-47

Incl. sheet metal storage bins from Storemaster. System is professionally dismantled and stored, technical data and layout see attachment, pick-up on 28.10.2026, The dismantling must be carried out by one of the partner companies mentioned. The costs for this are to be requested by the buyer himself. Auction-ID: A1-50085-168

total power requirement:250 kW heating capacity:2 x 50 + 2 x 33 =166 kW drying plant - electrically heated:2 units: 40 + 53 KW cleaning pump:in gesamt ca. 20 kW 1 Markert Cleantec continuous surface cleaning machine, year of manufacture: 2003 Continuous length approx. 7,000 mm with division into washing zones, rinsing zone, and blow-off system with associated transport system with 2 x 90° curved elements with chain drive with electric control for transporting wire mesh baskets, primarily 400 x 600 mm with associated control cabinet for controlling the timed material flow Machine no.: 932

TIG Welding Machine, Electric Welding Machine KESTRA Type TIG 350 AC/DCE Welding MachineFabr. No. 09720693 Year of construction approx. 1985Power 350 Amp. = 60 % EDExsetting range 3 steps and fine adjustmentCurrent type AC / DCNet connection 400 volts, 50 Hz, 32 Amp. Plug- 4 meter hose package with TIG torch- 2 stroke / 4 stroke welding device- Water-cooled- Gas pressure reducing valveSpace requirement L x W x H 1050 x 560 x 900 mmWeight 250 kgThe welding test gives good results when welding stainless steel with

TIG welding machine, electric welding machine DALEX type TGKW 55 (AC-DC)Series No. 532521 year of construction approx. 1975Power 225 Amp. = 60 % ED 125 Amp. = 100 % EDEsetting range 2.8 to 225 ampereCurrent type direct current and alternating current (AC-DC)Mains connection 380 volts, 50 Hz- Power setting via 5 coarse steps and fine adjustment via rotary potentiometer infinitely variable- 2-stroke and 4-stroke welding device- Remote controller with rotary potentiometer for fine adjustment- Digital display for ampere- TIG hose package 4 meters- Welding gas pressure reducing valve-

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Pot discs - diameter:175 mm spindle extension:180 mm operating voltage:400 V Machine weight approx.:300 kg room requirements approx.:0.90 x 0.60 x 1.80 m

Combi with 11.1.073 Novopac Shrink tunnel Remaining: 3 parts Chassis number: 4395905 Weight: 1,0 tons Power: 4 kW Air pressure: 7 bar L x w x h first part: 2600 x 1700 x 2000 L x w x h second part: 3200 x 2400 x 1700 L x w x h third part: 1775 x 3300 x 1500 Working height: 85 cm. Transport size L x W x H: 2,6 x 1,7 x 2,0 + 3,2 x 2,4 x 1,7 + 1,775 x 3,3 x 1,5 Min.-max. glass thickness: Max 300 mm Min.-max glass size: Max 1460 mm width Condition machine : Repaired after malfunction Control type: Automatic Electric. Connection: 400V Documentation: Available Instructions: Available Electric diagram: Available Parts list: No Remaining: Combi with no. 23073 Photos/film available: Photo's available

Carrier bag machine, SOS block bottom bag machine with flat inside handle unit Photo cell 4 colour tail end printer Bottom patch Bag with handles: Bag width: 20-32 cm Tube length: 33-66 cm Bottom width: 7-18 cm Bag without handles: Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

The SERVOCUT 602 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machines ...

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests stable, using finite elements FEM, 2-line universal test era Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. Very well Made in Italy | Europe, German + European Q ...

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

Machine base soil tillage machine, floor cleaning machine, floor curing machine -Manufacturer: Minuteman, Multi-Clean machine base tillage machine -Type: 670691 UV-8 Power Supply -Voltage: 230V -Dimension: 600/440/H370 mm -Weight: 29 kg

Offer via gebr. refurbished - pipe cutting and chamfing machine Fabr. GF Type RA6 Saw was completely overhauled and tested. - Engine completely new - Gearboxes restored and new seals specifications: Pipe outer diameter 75-183mm Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 40 - 215 rpm. Speed levels electronic 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

-Model Colatrice REL 600 -with digital foil keyboard -380 volts -50 Hz -Year of construction 2001

End Milling Machine Drill Milling Machine working width mm: 3200 Left - right swivelling saws from 0° - 45°. Complete with drilling unit Suitable for machining doors and door posts.

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Vibrating screening machine VS 1000-1 Decker: - Modular and expandable modular system - Dustproof and safe to work - External/internal screen frames depending on the equipment - Stable design - Easy disassembly and cleaning of all components - Set ready for connection and ready for operation - Conical bottom for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (standard) - German operating instructions (other languages at extra charge) - Ball tapping cleaning incl. standard balls per screen deck (standard) Size (mm) 1000 Screen area (m²) 0.694 - 0.785 Interference circle diameter (mm) 1620 Drive power (kW) 1.25 Weight (kg) 248 - 330 1 deck (total height mm) 1275 - 1285 Screening machine for screening in 2 fractions. All wetted parts blasted from VA 1.4301 (standard) and glass beads. Seals Screen frame made of silicone material (s ...

Rubber balls as wear material for your screening machines, vibrating screening machines, tumble screening machines: Diameter: 30mm Material: EPDM, NR/SBR, silicone, PUR, silicone (detectable), polyurtehane (detectable) Quantity: 1 pack (100pcs) possibly small quantities Price: On request (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Deflector profile in various versions as wear material for your screening machines, vibrating screening machines, tumble screening machines: Height: 27mm Material: Silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters as well as materials and colors on request, only partially in stock, attention possibly minimum order quantity)

Rubber lids as wear material for your screening machines, vibrating screening machines, tumble screening machines: Outer diameter: 100 / 150 / 200 / 250 and 300mm Material: NR45 and silicone Price: On request After technical testing by KELLNER Siebtechnik, our spare and wear parts are also suitable for individual machine models from competitors. (Other diameters and materials on request, only partially in stock, attention possibly with minimum order quantity)