washing bottle used for sale

Capacity: 540 bottles /h of 0.5 l. Made from stainless steel. Product: beer, kvass, soft drinks.

production capacity up to 5.000 bottles/cans/h 0,5 L; submersible-shower type automatic; alarm system; for glass bottles, tins and cans; equipped with Italian and German component parts; made from stainless steel;

Qty. 2 Second-hand pickling lines Mfc.: Sundwig Built: 1968 Tank of clean HCl: 50 m³ Tank for dirty HCl: 50 m³ Strip width: 1525 mm Qty. 3 Tanks interconnected one for each bath 310 m³ Qty. 3 Baths HCl 152.5 m Double bath pre-washing water Bath for final water washing Heater Chimney for taking out the acid vapors Acid pumps Auxiliary pumps Leveling machine Mfc.: AEG-EMG Built: Oiling machine Mfc.: Sundwig Built: Coiler Mfc.: Sundwig Built:

Chromium Plating Technology The Modern chromium plating technology. The year 2009 and is in service since then in single-shift model. The type of chromium is hexavalent. The line is equipped with automatic transport system for moving of girders among the tanks within the line lengthways and crosswise. There is as well a powerful ventilation system installed above the production line. The Basic purpose of investment is chrom plating of towel radiators of various types and dimensions. The Average quantity is 2 pcs. of radiators per girder. The Maximum product size for application is 2.000 mm in length, 1.400 mm height and up to 250 mm width. Capacity The planned capacity of the technology in two work-shifts is about 25.000 PCs. Per year. The cycle time per girder achieves 12 minutes. There is as well a possibility of capacity increase due to installing of additional chemical tanks with ...

Ultrasonic cleaner GT85 GT 2000-3P built in 2008. The washing tub is made of 316L stainless steel, the other tubs are made of 304 stainless steel and the supporting structure is made of structural steel. The volume of washed products should not exceed (LxWxH) 2400 x 600 x 600 mm Industrial washer - technical data: - external dimensions (LxWxH): 6400 x 4400 x 2800 mm - usable dimensions: chamber I (washing and phosphatizing): 2800 x 800 x 900 mm - useful dimensions: chamber II (rinsing): 2800 x 800 x 900 mm - usable dimensions: chamber III (drying): 2800 x 800 x 900 mm - power consumption: 63 kW - total weight: 2500 kg Bathtub 1: - preparation type: Ruster P02, Roklin P11 - pH: 2-4 - bath operating temperature: 20-60 degrees C - total bath capacity: 2000 l - maximum product weight: 500 kg - maximum product volume: 250 dm3 Bathtub 2: - type of preparation: tap water  ...

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

Tribloc Procomac / Ortmann & Herbst / Zalkin with Procomac rinser with 55 rinsing stations, Ortmann & Herbst Hansa B filler with 70 filling valves and 10 head Zalkin plastic screw capper incl. pick-and-place system The rinser Procomac will be blocked to the monobloc filler/capper by cardan capacity: approx. 18. 000bph based on 0, 5ltr. PET-bottle

Ortmann +Herbst / Crown Simplimatic 100/15/15 Glass Bottle Filler with 100 filling valves, 15head crown corker and 15head Zalkin plastic cap screw capper with Pick and Place System Model: Hansa M Built: 1999 Running direction: left - right Pitch: 113 mm with double pre-evacuation Capacity: up to 40,000 bph at 250 ml of mineral water bottles up to 30,000 bph with 330 ml of beer glass bottles Electric: Siemens S7 with touch panel with safety housing incl. 200, 250, 330, 500, 750 and 1,000 ml sets (bottle drawings attached) incl. many spare parts (e.g. filling valves, lifting cylinders, crown cork head etc. - list attached) The product distribution list was renewed in November 2019. Hot filling is also possible if you use Nitrogen instead of Co2.

FRICTION WASHING MASHINE Electric power 7,5 kW In good condition

Machine type TIG inverter welding system water-cooled DC and AC system Make Merkle Type Insquare 250 W Plant No. 22,351 Connection voltage 3 x 400 volts Setting range 5 - 250 amperes Switch-on time 60% ED at 250 amperes 100% ED at 200 amperes Current setting infinitely variable maximum weldable material thickness steel / VA = 6 mm Aluminum = 4 mm Cooling inverter by built-in fan Cooling burner water-cooled Execution of mobile industrial plant Hedging 16 Ampere Dimensions L x W x H 955 x 515 x 945 mm Weight 120 kg Age approx. 20 years Condition workshop-tested very well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG burner WHW 20/Z, 4 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure meters 1 pair of TIG gloves 1 piece spare part box cpl. Equipped  ...

1 of used film-only shrink wrapper, make ZVT (KHS), type SP030V, new 2000. Operating side: left. Capacity 30 cycles/minute nominal, 35 cpm in overspeed. Siemens S7 PLC. Indramat EcoDrive servo's. Used for PET bottles in clear and print-registered shrink-wrap film as: 500 ml, D 63.5 x H 230 mm, 3x2=6, dual-lane, 1.000 ml, D 80 x H 281 mm, 3x2=6, dual-lane, and 1.500 ml, D 89 x H 332 mm, 3x2=6, dual-lane. Future option (no parts supplied) was 2.000 ml, D 100 x H 349 mm, 3x2=6 and 2x2=4, dual-lane.

We offer you used filling technology from all over Europe. We have constant access to filling lines for glass bottles, PET bottles or FE cans. Either we can offer you complete filling lines, or individual modules to expand or upgrad your previous line. Due to the fact that we have constant access to hundreds of individual components, we can also put together your desired filling individually. In addition to the components and complete systems, we also keep the complete peripherals such as unpackers, packers, loaders, palletizers, conveyors, lifting tables, distributors, turning stations, chain conveyors, labeling machines, pasters, coolers, Impregnating, mixers, compressors, blowmachines, carton erpers, cardboard sealers, shrink tunnels, winders, packers, carrying handle machines, uncorkers or block technology for you. Contact us and just tell us your destination: Is it a ...

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Jump pads, crack rescue unit System Lansang, used Size 1, type 10 Manufactured by Ziegler not tested without pressure bottle Price: 500.00 Excl. 19% VAT

Beer bottles Washing machine ILOMA - 12-14 000 b/h

Complete filling line for disinfection fluids I have for sale a complete filling line for still fluids such as: disinfectants, chemical compounds, technical fluids or water. On this line 0,33 l – 6,0 l containers or bottels can be used. The line consists of: 1. Filter; 2. Container for fluids, volume ~800 l; 3. Pump; 4. Non automatic washer for used containers/bottles; 5. Gravity flow filler, with 8 separate filling nozzles; 6. Single cylinder Capper; 7. Labeller; 8. Collective table; „as it stands” EXW Kędzierzyn-Koźle Our Company offers conveyors – new and used. In case of further question please do not hesistate do call or mail us.

Vacuum filling and closing monobloc Cobert 32/8 for 38mm widemouth PET bottles Type: Ambra with 32 filling valves and 8 head Arol plastic screw capping machine (incl. pick and place system) Tempreature filling: 85° C degrees hotfill Running direction: right to left Neck size: 38mm widemouth year of manufacturing: 1994 capacity: approx. 6.000bph based on 1.0 ltr. PET-bottles incl. saftey housing around the machine

Vegetable washing machine Pea washing system Blanchier Drum Steinausleeser cleaning system Suitable for legumes, vegetables and similar products. The system was used for washing, cleaning and sorting peas.Was formerly used for washing blanching cooling Components e.g. - Acceptance tape - Leaf wind cleaner - Siebreiniger - Circulating conveyors - Wet flood canal - Stone reading - Wet sieve drum - Water collection tank with water purification drum and pump - Discharge circulating conveyor The machines are product-contacting made of stainless steel. Power approx. 10-15 to/h, depending on the product. The plant has already been dismantled, item site 01587-Riesa. A visit is possible at any time.

Type: 9T S2/E2 SENSITIVE Model: A-720 Machine capacity: 135 bottles per minute

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version portable compact system Fuse 16 Ampere Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece user manual Warranty 6 months ...

Machine type TIG inverter welding system water-cooled DC system Make Merkle Type TIG 300 DC W Plant No. 85.186 Connection voltage 3 x 400 volts Adjustment range 5 - 300 amperes Switch-on time 50% ED at 300 amperes 60% ED at 280 amperes 100% ED at 220 amperes Current adjustment infinitely variable max. weldable material thickness 8 mm Cooling inverter by built-in fan Cooling burner water-cooled Version of mobile compact system Fuse 16 Ampere Special accessories trolley Dimensions L x W x H 535 x 230 x 670 mm Weight 40 kg Age 9 years Condition workshop-tested well incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece TIG welding torch 8 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 piece spare part box kpl. Equipped 1 pair of welder gloves 1 piece  ...

Heavy Hochleistungshobelmaschione type Waco 6,000 with 8 spindles. Feed speed 75 m/min up to 600 m / min. Spindles: U/O/RE/LI/U/O/O/U Working height: 17 mm to 120 mm. Max-width 50 mm up to 350 mm. All spindles with Jointer. Machine with feeder table (accelerator) and cross conveyor. Complete switchgear including FU's. Including soundproof cabin! RONDAMAT and washing machine for planing heads. 1 set of tools.

Qty. 1 Second-hand blower and PET filling line Mfc.: SIG (Germany), KHS (Germany), Robopack (Italy) Built: 2006 / 2007 Stopped: 10 / 2020 Product: Beer Cap type: PCO 1881 Technical Data 1. Blowing machine Mfct.: SIG Type: Blomax 6 Year: 2007 Cap Type: PCO 1881 PLC type: ABB controller Consisting of: Blowing machine pre-form feeder (without tipper) chiller (Mfct.: Riedel, 2007) Capacity: at 2 litres: 8,400 bottles / h at 1.5 litres: 10,500 bottles / h at 1 litre: 10,500 bottles / h 2. Filler Mfct.: KHS Type: INNOFIL EM/125/R/PET 54 / 9 / Rinser 36W Year: 2007 Total working hours: 90,000 Product: Beer Cap type: PCO 1881 Consisting of: Rinser, Filler, Capper (incl. cap feeding system) Cap feeding system: Mfct.: Hormes, Year: 2007 3. Cleaning system / CIP station Mfct: KHS Type: Innopro – CIP Year: 2007 Consisting of: Stainless steel tan ...

Mfc.: OBRAM Type: ZP43 M00 Built: 2003 Revamped 2007 Capacity: 12 000 l/h Holding time / heat treatment of the product: 30 seconds Temperature: 96 - 98 ° C Washing CIP Controls on the controller: Siemens S7 Heating exchange with plates Overview Service unit: March 2014.

Ultrasonic cleaning systems, washing systems as single or multi-chamber systems, with or without handling system, can be realized in various standard size, special needs can be realized

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...

Model: Starmatic type: K080-xx5 Model: 900-24-480-8-6-130 built: 1992 Performance: 34.000 bottles / h Direction: right machine Feeding: parallel Aggregate: Hull PWL410, back PWL410 Glue roller: steel glue roller Management: 2 x inlet star, 2 x outlet star Labels-L =: min. 50mm, 180mm Bottles-D =: min. 50mm, 125mm Voltage: 220/380 V Labels: Body, chest, back from the site: "as is" condition in a functional State or from site: outdated State with 12 months warranty Machine dimensions: 2.20 x 1.80 meters. The dimensions refer to the base without excess of aggregates and spout extension

High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...

Hinst continuous cleaning system Continuous washing systems from the manufacturer Hinst are designed to treat series parts in large quantities with the highest purity requirements at the same time. Appendices No. 04.333 Year of construction 12.2004 Dimensions approx. WxDxH: 3.80 x 4.30 x 3.80m Incl. - 6 baskets: Basket dimensions: 48,5x48,5x H26cm - Roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored with a value of € 3,500 these are included in the purchase price. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Filling height control in beverage bottles

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type MobiTIG 180 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 180 amps Duty cycle 20 % ED at 180 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 355 x 160 x 275 mm Weight 9 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 18 months warranty 1 piece instruction manual List-Werks-Price ex stock  ...

Uhlmann C 100 horizontal cartoning machine - Fully automatic bottle packaging and simultaneous feeding of    leaflets - Max. Power 100 FS / min - Bottle length max. 150 mm Format: L = 70 x 130 mm B = 30 x 100 mm H = 15 x 85 mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel mechanically overhauled Optional: - GUK folder folder 4 fold folding - Cognex 1D barcode and 2D matrix codes reading system for brochure leaflets    and carton code - Luminance control, presence check for leaflets in carton - embossing station - brochure feed - Vacuum pump / Venturi nozzle

Washing machine Pero3/u (2 tank) with odolejaczem

Year issue: 2017 - new Capacity: 20,000 cph, complete stainless steel Product: energy drinks and juice Can: 250 ml. Type of can: 202/200 slim can Heating method: Steam - Plate heat exchanger in outside of pasteurizer Material: Stainless steel AISI 304 1. TECHNICAL CHARACTERISTICS OF THE PASTEURIZER Temperature of product (inlet temperature) in pasteurizer: 2? - +6? Temperature of product (outlet temperature) from pasteurizer: +27? - +30? Pasteurizing temperature: +72? - +75? Holding on pasteurizing temperature: 12.5 min Heat consumption (steam by 3-4 bar) during stable operation: 480-550 Kg/h Temperature of steam: +140? Water consumption during stable operation: 0.5 - 0.9 m3/h. Consumption of compressed air 6 bar: 500-700 nl/h Total power consumption: 30 kw Supply voltage: 3F/N/PE/A, 50Hz, Control voltage: 400 volts Degree of protection: IP-54  ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

Hydraulic bottles Jack stamping trolley lifter for trucks and commercial vehicles. Manufacturer Weber Hydraulics Lifting capacity 20to Building height 240mm Lifting distance 155 mm Threaded length 110 mm Total length extended and thread turned out 505 mm Diameter piston rod 60 mm Unused lifter from Bundeswehr bestaenden, without oil filling and without pump ingestion rod. 12 stueck available, price per piece. Special price

Hamo T420 Cleaning and Sterilization Machine APPLICATION For efficient cleaning of various materials and components such as glassware, vessels, filling line components and and other parts in the Biotechnology and pharmaceutical manufacturing industry. DESCRIPTION - The l-lamo T-420 Pharmaceutical Washing Machine is equipped with a programmable PC controller control system. - Hamo Pharmaceutical Grade washing machines are designed, manufactured, validated, and documented according to the latest GMP standards - The washing machine offers up to 99 fully programmable cycles - Execution of up to 99 different phases. Specifications: Model T-420 Instr. No 3411 Machine No. 3.41.6.0411 Volts: 3x400 V 50 Hz Amps: 25 kW: 14.4 Year of construction: 1996

Wexiödisk WD-100GR Granulate Dishwasher The WD-100GR is a granulate pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with efficient centrifugal wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing device No pre-washing or scrubbing by hand thanks to vigorous washing with water and granules Great hygiene and fast drying with centrifugal cycles Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be done from the front or from the side Effective dishwashing and high capacity with double dishwashing sy ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-160 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 100 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 pc TIG burner Alphaweld SR-17, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 pi ...

Machine type TIG inverter welding system gas-cooled DC and AC system Alphaforce brand Type W-200 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 90 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 240 x 435 mm Weight 22 kg Special accessories connection for foot remote control Age 6 months Condition workshop tested as new incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner Alphaweld SR-26, 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1  ...

- Foerder speed infinitely variable rated power up to 1000 kg/h engine power 0.37 (0.5) kW (PS) Electrical connection 230V 50Hz (single-phase) Electrical fuse 16 A Laenge 2500 mm width 70 0 mm Hoehe 2100 mm He He Assumption 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 inside Connection for washing 1/2 outside High fruit delivery 1750 mm ; New machine - best condition

USED ROUSSELET ROBATEL RCR 40VXR ATEX CENTRIFUGE REF#: C6812 Second hand vertical axis basket centrifuge with top discharge with bag. Model RCR 40VXR manufactured by ROUSSELET ROBATEL. All parts in contact with the product are made of 316L stainless steel. General characteristics: Manufactured by ROUSSELET ROBATEL Model RCR 40VXR Type ATEX Material Stainless steel 316L Manual opening lid with 3 adjustable k-type closures, charging tube, washing tube with 5 nozzles, N2 inlet and outlet connections for inerting, sight glass with clean for load visualization and flange for venting. Equipment with inerting panel, siphon closure and control button panel. Technical characteristics: Basket diameter 500 mm Max. load 40 kg Max. rotational speed 280/2800 rpm

Nominal rating 1000 kg/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Length 2500 mm Width 700 mm Height 2100 mm Discharge height 800 mm Weight 150 kg Material 1.4301 / AISI 304 Connection for cleaning ½\" inside Connection for washing vessel 1½\" outside Height fruit outlet 1750 mm ; new machine - top condition

ARPAC M16632 Manufacturer: ARPAC USA Line date: 2018 new, original packed Product description: Plastic Jar, 35 jars (bottles) / Minute (per line) Packaging description: RSC Cases (regular slotted case) , tape sealed System description: ARPAC ARPAC developed an integrated solution for this end line packaging system. Product is received single lane, diameter-to-diameter, into an automatic cartoning machine. Cartons are pushed into the required case pack configuration by a pneumatic row pusher. Product is collated, packed into a case, and manually palletized. Labellers: Jars (bottles) arrive filled, sealed, and are already labelled One Jars are placed inside a carton, the flaps are sealed with glue and a printed label with date/lot code is applied. Once cartons are placed in case, the flaps are sealed with tape and a printed label with date/lot code is applied. F ...

Automatic labeling machine designed for automatic sticking of self-adhesive labels on cylindrical packages (bottles, jars, cans, etc.) and on packages with rectangular cross-section. After equipping the machine with a packaging orientator, it is also possible to label packaging with irregular cross-section (oval, lenticular, etc.) A single label is stuck on cylindrical packages, while flattened packages can be covered with two labels at the same time. The labeller can work independently or cooperate with other devices in the technological line. It is possible to apply alphanumeric characters to the labels by hot printing through the marking foil. Efficiency: depends on the size of the package and label, up to 3000 pcs / h Max packaging dimensions: length - 80 mm, height - 300 mm Maximum dimensions of labels: length - limited by the size of the package, height - 165 mm  ...

Schraegaufzug SA200 with swivelr raetzmuehle RM2,2 - Use with or without raetzmuehle without conversion work possible nominal power up to 1000 kg/h motor power Elevator 0.37 (0.5) Muehle 2.2 (3.0) kW (PS) Electrical connection 400V 50Hz (Electrical connection 400V 50Hz ( 3 phases) Electrical fuse 16 A Laenge 2620 mm width 700 mm Height 2100 mm He he Assumption 800 mm Weight 185 kg Material 1.4301 / AISI 304 Connection for cleaning 1/2 internal connection for washing mm Supplied cutting sieve 9 and 16mm ; New machine - best condition