washing bottle used for sale

Manufacturer: Krones Model / Type: Linatronic 735 M2 Type of Machine: Empty bottle inspector Year of Manufacture: 2007 CAPACITY - Capacity: 39,600 bottles per hour ADDITIONAL EQUIPMENT - Glideliner, Akkutable, and some conveyor belts may be available Find more here - .ucymachines/ Contact us at - sales@ucymachines

Overview The bottle washer Sirio 7 from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar

Overview  This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is out production and be viewed in person in our warehouse. Techn. Details Capacity:  6,000 bph Min/ Max: 3,000 bph – 6,300 bp Bottle type: 0,5L, Euro, NRW, incl. Set of parts for 330ml vichy bottle Bottles per row: 12 Bottles in the machine: 1,080 Bottle cell carriers: 96 Dimensions:  Length: 6,000 mm Width: 1,545 mm Height: 2,175 mm (without feet) Weight: approx. 5,800 kg Water consumption: 3,6 m³/h Heat consumption 80°C: 480 kJ/ h x 1000 Electrical consumption: 11 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Machine body fully in stainless steel All hot zones with 5cm insulation Label extraction belt Heat exchanger in stainless steel for low pressure steam 116°C-120°C at 0,7 - 1 bar Self cleaning spray tubes in stainless steel

consisting of:  - Depalletiser, KETTNER, year 2000, 15000 bph, - Rinser with air, Alwid, year 1999, 7500 bph, - Filler with capper, Fimer/Arol, year 2006, 8000 bottles/hour - Labeller, Krones Variomatic, year 2001, 8000 bottles/hour - Carton erector, KETTNER, year 2001, 20 cartons/min. - Packer, KETTNER, year 2001, 7000 bottles/hour Details: - Control Siemens S7 - different format sets available, - for glass bottles from 0,35L to 1,0L with ROPP cap of 30mm and 31,5mm - annual maintenance by Krones technicians - very good condition

Posimat Access Series N-37 Bottle Unscrambler (2014) Auction-ID: A1-48805-58

Glass bottle filler and capper with short-tube filling valves for level filling (measured filling) of bottles. The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). The pinion control system was replaced in 2025. As part of this, all pinions were also replaced. The air ring for the lifting cylinders of the filling mechanisms was replaced around 2023., Additional title: Short-tube filler with pre-evacuation and crown cap sealer, Capactity: 44000 bo/h, Number of filling valves: 90 pcs., Number of capping heads: 15 pcs., Formats: 0,5 l NRW bottles; crown caps, Material: housing and contact surfaces from stainless steel, Base construction: caroussel-type filling and capping block, Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective h ...

Empty bottle inspector for checking the side walls and mouth, as well as for residual liquid and metallic foreign objects. The bottle height is inspected before the bottle reaches the inspector, and non-conforming bottles are rejected., Additional title: Inspection of glass bottles prior to filling, Capacity filling line: 44000 bo/h capacity at the filler, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in floor-standing housing on feet, Features: height inspection; bottle transport; housing; control panel

A washing machine for cleaning glass bottles prior to beverage filling. The soiled empty bottles are loaded into bottle baskets and pass through the system for approximately 14 minutes. First, the bottles pass through a pre-soaking bath and a lye bath in the lower section, and are then rinsed in the upper section with lye, twice with hot water, cold water and finally fresh water. The cleaned bottles are discharged onto the bottle conveyor above the bottle inlet., Additional title: single-ended machine for cleaning glass bottles, Nominal capacity: 33000 Fl/h ; mechanical control range: 13.200 - 36.000 Fl/h, Number of basket holders: 269 pcs. ; of which 259 were filled – total number of bottles: 7.770 pcs., Processing time: 14,14 min, Heating / Cooling: 1.352.712 kJ/h, Water: 7,92 m³/h, Formats: 0,5 l NRW bottles, Material: housing from stainless steel, Position: in a cabinet on legs wi ...

For profiling and edge-milling windows doors individual components and similar items with all-round profiles, including return feed Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, 3. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

Weinig Univar 10 automatic moulding machine for profiling and milling windows and doors, individual components and similar items with circumferential profiles, including a mechanism for single-person operation Units: Technical data: 1. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, synchronisation device 2. Profiling spindle, motor: 11 kW, spindle diameter: 50 mm, clamping length: 320 mm, stroke: 4×80, hydraulic, Condition: Gebraucht Location: Tauberbischofsheim, Germany

Used R. BARDI nilo 2-20R bottle washer 20000 BPHTechnical Specifications & Performance DataThe R. Bardi Nilo 2-20R is a linear bottle washer designed for returnable glass bottle handling in bottling and industrial packaging operations. Manufactured in 2002, this machine is engineered to support high-throughput washing processes within a used bottling line, combining bottle cleaning performance with format flexibility.Manufacturer: R. BardiModel: Nilo 2-20RYear of manufacture: 2002Maximum output: up to 20,000 bottles/hourConfiguration: LinearOperating pressure: 6 barCompatible formats: 0.25L, 0.33L, 0.5L and 0.75L bottles, plus other formatsContainer material: GlassAdvanced Automation & Control SystemsThis bottle washing machine is intended for continuous industrial operation, with a linear layout that supports controlled bottle transport through the washing process. Its design is suitabl ...

On behalf of our client, we are selling this SIG Asbofill ABF (Aseptic Bottle Filler), 10-Lane, PET bottle filling machine which is designed for the aseptic filling of liquid, non-carbonated, microbiologically sensitive high- and low acid products into prefabricated plastic bottles. The client bought a new and bigger aseptic filling machine for extension of his production capacities. This machine is recently dismantled and located in the warehouse of the dairy factory., The machine was used the last 8 years to fill protein shakes and milk related drinks (cold fill) at the current factory. Before it was used for fruit juices. Sterility Assurance Level (SAL) of 6-log reduction. Shell of life of the current products: 9 months. Capacity: 12.000 bottles/h @ 1.000 ml, 10.000 bottles/h @ till 1.500 ml and 8.000 bottles/h @ till 2.000 ml. Filling accurancy: ± 2 ml (filling volume 1.000 ml). Bot ...

Overview Complete filling line for non-returnable glass bottles with an output of approx. 16,000 bottles/h at 0.75 L and approx. 20,000 bottles/h at 0.33 L. The heart of the line is a KOSME BARIFILL RFC 50-60-10 VKP rinser-filler-capper block built in 2013. New glass is fed by a Krones sweep-off depalletizer from 2020; downstream, the line comprises Krones CHECKMAT cap control, a KHS INNOKET cold-glue labelling machine with camera-based label orientation, a Krones WRAPAPAC wrap-around packer and a GEA Procomac OPERA palletizing system with Robopac stretch wrapper and Logopack pallet labelling. An attractive mid-range line for water, soft drinks, beer, cider and other glass-bottle applications. Technical data Year of manufacture: mainly 2013 Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L Application: filling and packaging of non-returnable glass bottles Filling syst ...

This bottle distribution and sleeve-wrapping production line includes the following equipment: Machine 1: Bottle Distributor - Manufacturer: BCM - Model / Type: 1750-020 - Year of manufacture: 2002 - Speed: 200 bottles per minute - Number of channels: 16 - Width of the channels: 110 - Mini format: 50 x 25 x 100 mm - Maxi format: 100 x 50 x 250 mm - Electrical connection: 3 x 400 V N+T - Installed power: 50 Hz, 10 KVA, 20A - Pneumatic functioning pressure: 6 to 8 Bars - Pneumatic connecting section: diameter 9 - Pneumatic consumption: 120 L per minute Machine 2: Sleeve Wrapping Machine - Manufacturer: Sleeve Technology - Model / Type: HSSA1500 + HA - Year of manufacture: 2020 - Function: device designed for applying foil sleeve wraps to products - Speed: 50 pieces per minute - Current capacity: 50 ml bottles - Machine number: 1907085 - Voltage: 3 x 400V + N + PE - Frequency: 50Hz - Po ...

Fully automatic can holder/bottle display from Tölke incl. feeder. Perfectly functional, used in a production until recently. The can display is sold solely because the product has been replaced. 60 pcs/min Adjustable to different formats, currently set to 400 ml round cans. Can also be used for bottles and other cans of any kind The machine can be visited.

Packed per 12 a box, on and including 1 pallet Auction-ID: A1-48959-729

On and including 2x pallet Auction-ID: A1-48959-734

Consisting of 20x Sanisure 5ltr Pharmatainer assembly and 5x Sanisure 20ltr mixed4sure bottle, including 1x Corning disposable spinner flask, on and including 2x pallet. Auction-ID: A1-48959-727

Tester for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Dimensions 600×400×380 mm; Weight 24 kg; Field of view Ø 250 mm; Magnifying glass Ø 300 mm; 230/115 V, 50–60 Hz; 3 fluorescent lamps; 2 m cable. Auction-ID: A7-49816-163

Testing device for the detection of particles in infusion bottles; two polarizing filters and magnifying glass; for brown bottles with cold light. Cold light source with Included in delivery, light guide missing. Field of view 250 mm; 3 fluorescent lamps; 230 V, 50 Hz, 0.5 A; Power consumption 24 W; 2 m cable, switch, Schuko plug. Auction-ID: A7-49816-162

Bottle formats: diameter approx. 20–40 mm, height approx. 45–70 mm, depending on the format set Capacity approx. 6000 bottles/h With format set for round bottle Ø 24 mm x length 52 mm Feeding hopper with lifting device Alignment for the correct positioning of the bottle on the conveyor belt (e.g. filling machine) 240V/50 Hz

automatic two-side (front&back) labelling machine, PMR operation system OP3000, newer used, new 2022

Overview This Krones Linatronic M is an empty bottle inspector for glass bottles, built in 2018. It inspects every empty container before filling and rejects any container that fails one of the inspection stages. The machine combines camera-based base, sealing surface, screw thread and sidewall inspection with high-frequency and infrared residual liquid and caustic detection. Two sidewall modules with four mirror assemblies and four cameras provide a compact full-front view of the container, and the DualFlash neck finish lighting inspects the outer and inner sealing surface separately using two minimally offset lighting angles. Foreign containers are identified at the machine infeed by height, contour and colour detection. Three Ecopush rejection points separate foreign, dirty and damaged containers. The machine is operated from a Krones iPanel CD terminal. Technical data Manufacturer: K ...

Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts

Overview  This bottle washer was manufactured in 1998 by the German company PAC. The CB 14-0,5L-R-7 LII Compact model is a fully automatic returnable glass bottle washer designed for medium-capacity beverage filling lines. With a throughput of 7,500 bottles per hour, it ensures effective cleaning through a multi-stage process using caustic and hot-water baths. The unit has 14,175 operating hours and is in good working condition. Technical data Capacity: 7,500 bottles/hour Adjustable speed range: 3,750 – 7,875 bottles/hour Cycle time: 6.72 seconds Total treatment time: 11.65 minutes Bottle formats: Up to Euro-NRW Bottle rows per carrier: 14 Bottles inside machine: 1,456 Bottle carrier trays: 110 Effective spray times: Hot lye 8.96 seconds Lye II 8.96 seconds Hot water II 8.96 seconds Hot water I 8.96 seconds Cold water: 13.44 seconds Fresh water max.: 8.96 seconds Utilities Water consu ...

Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data Manufacturer: KHS Model: ...

EXPIRES APRIL 2022 Auction-ID: A1-50069-244

EXPIRES APRIL 2022 Auction-ID: A1-50069-259

EXPIRES APRIL 2022 Auction-ID: A1-50069-258

EXPIRES APRIL 2022 Auction-ID: A1-50069-261

EXPIRES APRIL 2022 Auction-ID: A1-50069-260