130,191 used machines on RESALE, but how to find them? Machine Search
The machine is in good technical condition, after prior agreement it is possible to test it. Maximum turning diameter: 400 mm Maximum revolving diameter: 760 mm Maximum machining length: 680 mm Maximum spindle passage: 75 mm Travels in the X/Z/Y axes: 250/750/+-50 mm Rapid traverses X/Z/Y: 30/30/12 m/min Machine weight: 6000 kg Machine dimensions: 3230 × 2100 × 2252 mm Fanuc drive performance parameters: Spindle motor power: 15 / 18.5 kW Maximum spindle speed (2 speeds): 0–875 / 0–3500 rpm⁻ Turret power for driven holders: 3.7 / 5.5 kW (30 min) Maximum speed of driven holders: 6000 rpm Servo motor power for X/Z/Y axes: 2.7 / 2.7 / 2.7 kW Cooling pump motor power: 0.5 kW Maximum torque on the MK spindle: 527 / 757 (30 min) N m Maximum torque of driven holders: 35 N m (15 min, 1500 rpm) Recommended clamping pressure range for clamping: 0.35 MPa – 3 MPa
Used labeling machine made by Clever, model GS 602. New 2010, sleeve labels. Performance: 45,000 b / h (0.4l, 0.5l) 24,000 b / h (1.5l) 22,000 b / h (2l) work surface height 1200 mm (950 mm standard) electric consumption 22 kW low voltage 24 V supply voltage 400 V 5x25 mmq wiring recommended air consumption 180 l / min pressure 6 Bar weight 4500 kg.
Chocolate temperer 50 kg with vibrating console - Year of construction: End of 2023 - In operation since May 2024 - The machine was operated exclusively with Pomati's T-LINE filling system. It is in a very good, almost mint condition. The vibratory plate was never used and therefore unused. The machine is for sale because the increased production is being converted to a larger model. Connected loads: 400 V, 50 Hz, 3 Ph Refrigerant: R 134 A Dimensions (WxDxH): 710 x 880 x 1350 mm Tank capacity: 50 kg Material: AISI 304 stainless steel structure Feeder: Pedal feeder programmable Condition: very good Availability: immediately The system was delivered at the beginning of 2024
Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)
GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineWheel Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeUniversal head with controlled B-axisContinuously positioning universal milling head (B axis) with integrated motor spindle for ...
GeneralUniversal Milling Machining Centre - Linear pallet changer with 2 pallets - Coolant tank 2,500 lt / 660 gallon - Internal coolant supply 40 bar / 580 psi through spindle centre (AD) - Chip conveyor - Rotating clear-view window - Electronic handwheel; Control: CELOS with Heidenhain TNC 640 Technical DataFeed rate longitudinal/transverse/vertical60000/30000/40000 mm/minRapid traverse longitudinal/transverse/vertical60/30/40 m/minWorking area 1Longitudinal3400 mmCross3400 mmVertical2000 mmTool changerType of magazineChain Tool changer planevertical Type of gripperDouble gripper Clamping surface: 2,000 mm x 2,500 mm / 78.7 in x 98.4 in (DIN 55201 - A2) centre bore: d 100 mm H6 / d 4 in H6 level bush: d 25 mm H6 / d 0.9 in H6 Number of T-slots: 1x 22 H7 (alignment groove, table centre) 8x 22 H12 (clamping grooves) Distance betweeCabineFull protection cabinExtension Z travel range to 2 ...
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 ...
Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmGeneral- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Work spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle speed-12000 rpmSpindle ...
DEMONSTRATION MACHINE Cable cutting machine Maxi 100 Manufacturer: Grimo Diameter cable: 6 - 100 mm Separation speed: 40 meters per min Dimensions (L x W x H): 700 x 700 x 1270 mm Weight: 165 kg Drive: 2.2 kw / 400 V Knife adjustment: mechanical
Guildmaster CTX 210 2005 Turning diameter: 290mm Turning length: 300mm Orbital diameter over bed: 380mm Main spindle Speed range: 20-6000 min/-1 Max Torque: 79/72Nm max. feed diameter: 165mm Spindle diameter in front bearing: 90mm Rod diameter: max. 45mm C-axis: 0.04° Holding moment: C:112Nm Tool turret: Number of powered tools: 12 pos. Shank diameter: 30mm Speed range: max. 5000 rpm Clamping diameter driven tools: max. 16mm Travel X-axis: 160mm Z-axis: 305mm Riding pole travel: 370mm Feeds: Rapid response: X 20 m/min Rapid response: Z 30 m/min Rapid response: C 100 m/min
Technical data: - Edge grinding machine for edge processing on - welded boxes, cabinets, safes, etc. - Control SIEMENS for clocks + oscillation - max. grinding height approx. 1200 mm - Grinding belt dimension 100 x 2240 mm - Grinding belt speed 12 + 24 m/s - Grinding unit swivelling - 2 magnetic clamping plates - Mot. Grinding dust extraction - Pneumatic connection 6 bar - Drive 400 V - Space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg
General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 125 mm - B-axis ±120° with pneumatic locking - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 12 bar; 23l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length1200 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% ...
Format trolley for storing format parts for deep drawing machines made entirely of stainless steel with three drawers, a drawer and a storage surface, mobile with brake rollers Extracts resilient with 30 kg and with food-approved plastic, as well as the tray bevelled construction prevents the car from tilting. Format trolley is used for the proper storage of formats with all accessories. All parts are located in one place and can be driven to the machine when changing formats. Dimensions: 1250x900/600x1100 mm (WxDxH)
The machine is in good technical condition, testing is possible after prior agreement. The machine was installed in 07/2023 and was used very little. The machine was switched on for 3900 hours, of which 540 hours the spindle was running. Swing diameter over bed mm 750 MACHINE SPECIFICATIONS STYLE 750 Machine STYLE 750 Swing diameter over bed mm 750 Swing diameter over slide mm 530 Distance between centers mm 4000 Bed width mm 450 Maximum load between centers kg 1800 Maximum load in combination with fixed steady rest (type U) kg 2500 Main spindle Main motor power (S6) kW 26 Maximum spindle speed (number of gears) rpm 2000 (3) Spindle bore mm Ø105 Spindle taper A2-11 X and Z axis X axis ball screw Ø mm 32 Z axis ball screw Ø mm 50 Rapid traverse m/min 8. Feed range mm/min 0.01-2000 Tailstock Ø quill mm 125 Quill stroke mm 225 Quill taper MT 6 General Weight kg 8150 Machine color Frame ...
CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure workpiece diameter: 100mm max. tool diameter: 180-245mm Swiveling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new
SN.: 16210512 Equipment / other information: Tool
Key data: 4200 mm, 1090 , 70
Screw diameter: 70 mm Injection weight in polystyrene: 1090 g Clamping force: 4200 kN Screw diameter: 70 mm Stroke volume: 1212 cm³ Injection weight in polystyrene: 1090 g/hp Injection pressure: 1,877 bar Clamping force: 420 t Lights Tie bar spacing H x V: 810 x 710 mm Tool installation height - min.: 380 mm Opening distance: 710 mm Microprocessor control: NC4 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 45 kW Total connected load: 82.4 kW Total weight: 20,000 kg Total size: 7.9 x 2.3 x 2.5 m Payment terms: 100 % before taking over the machine, net only
Micron WF 61 C Equipped with a controlled round table Workspace X-axis: 800mm Y-axis: 500mm Z-axis: 460mm Table: 1000 x 500mm Number of working spindle speeds: 21 Speed range 40-4000 rpm Pinole movement vertical: 90mm Feed speed in all 3 axes: 1-3000 mm/min
3000 x 1500mm Sheet 6500mm Tube length 3000w IPG FIBER
Key data: 3500 mm, 810 , 60
Screw diameter: 60 mm Injection weight in polystyrene: 810 g Clamping force: 3500 kN Screw diameter: 60 mm Stroke volume: 891 cm³ Injection weight in polystyrene: 810 g/hp Injection pressure: 2,420 bar Clamping force: 350 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 350 mm Opening distance: 730 mm Microprocessor control: NC5 Screen text: German Operating instructions: German FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- Pump drive power: 55 kW Total connected load: 78.1 kW Total weight: 17,300 kg Total size: 7.4 x 2.0 x 2.4 m Payment terms: 100 % before taking over the machine, net only
Mikron VCP 800 2007 Built in 2007 Control Heidenhain iTNC 530 Travel X-800mm , Y-650mm , Z-500mm Working spindle: Spindle speed max. 12000rpm. Tool magazine: Number of tool slots 36 Machine table: Clamping area 800 x 650mm Accessories: Inner coolant supply - Belt filter system 20Bar Conveyor
Lid Maho DMC 80 U hi-dyn Workspace: X-axis: 800mm Y-axis: 700mm Z-axis: 600mm Workpiece weight: 800 kg Number of axes: 5
Key data: 2500 mm, 521 , 55
Screw diameter: 55 mm Injection weight in polystyrene: 521 g Clamping force: 2500 kN Screw diameter: 55 mm Stroke volume: 570 cm³ Injection weight in polystyrene: 521 g/hp Injection pressure: 2,470 bar Clamping force: 250 t Lights Tie bar spacing H x V: 630 x 630 mm Tool installation height - min.: 300 mm Opening distance: 550 mm Microprocessor control: Selogica direct Screen text: German Instruction manual: German FHK interface for robots: Euromap 67 Core pull: 1 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.7 x 2.1 x 2.3 m Payment terms: 100 % before taking over the machine, net only
Turning diameter 320 mm Turning length 450 mm Control HEIDENHAIN Circulation diameter over slide 260 mm Travel - x 160 mm Travel - z 450 mm Speed range - main spindle 5,000 rpm Drive power - main spindle 11 / 7.5 kW Max Torque 76 / 112 Nm Turret head (x-fold) 12 pos
Pull-off machine for up to 60cm deep ovens Bakery 90x38cm We have several of these pullers in stock. New as well as used. Dimensions: 38cm Wide 90cm Long
Key data: 3200 mm, 287 , 50
Screw diameter: 50 mm Injection weight in polystyrene: 287 g Clamping force: 3200 kN Screw diameter: 35 or 50 mm Stroke volume: 141 /314 cm³ Injection weight in polystyrene: 154 / 287 g/hp Injection pressure: 2,500/1280 bar Clamping force: 320 t Lights Tie bar spacing H x V: 720 x 720 mm Tool installation height - min.: 300 mm Opening distance: 600 mm Microprocessor control: Selogica direct Screen text: german Instruction manual: german FHK interface for robots: Euromap 67 Core pull: 2 x Without material hopper / Without water battery: -/- all-electric injection moulding machine Total weight: 14,500 kg Total size: 6.5 x 2.1 x 2.2 m Payment terms: 100 % before taking over the machine, net only
5 Axis Lid Maho DMU 200 P Built in 2000 The machine is in very good condition. Videos under power available ! Technical data: Travel: X 1800 mm Y 2000 mm Z 1100 mm NC Round Table: Table area: 1700 x 1400mm Permissible load: 5000 kg Number of grooves: 11 Axis (swivel range) : 360 x 0.001 degrees Motor spindle: 8,000 rpm (SK50) Tool holder: SK 50 Tool changer: 60 seats Max tool weight: 20 Kg Max tool length: 450mm Max tool diameter: 110mm
Fielder Aeromatic GP1 - SP1 high-shear mixer for wet + dry granulation, incl. large selection of spares and parts Including large selection of spares and parts (some in As New condition) – please see photos. Designed to make wet granules from pharmaceutical powders – with capability to dry the granules by pulling a vacuum and heating (with microwave) the wet granule (SP1). Technical specs: • Capacity up to 10Litre • Inlet DIA: 15 mm • Pneumatic operated outlet • With jacket – working pressure: 2 Bar • Max. temperature: 0-85°C • Variable speed drive • Impeller rotor speed up to 1,500rpm • With lump breakerche • With motorcheck • Chopper speed: 1000-3000rpm • Mobile on wheels Size: L: 1.200mm x W: 800mm x H: 1,500mm, W/T: 650kg.
SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm
SAHINLER HPK 65 3-roll bending machine was built in 2005 in Turkey by Şahinler Metal Makina Endüstri A.Ş. The machine, designed for precision machining of tubes and profiles, is an excellent choice for any industrial plant. It enables workpieces to be made in circular, arc or spiral shapes with a fixed radius. The machining process is performed by three hardened rollers, of which the two lower rollers have hydraulic adjustment. These rollers are driven by a reliable, high-powered motor located inside a fully welded housing. Depending on production requirements, the SAHINLER tube and profile bending machine can operate in both vertical and horizontal positions. The total weight of the machine is approximately 1000 kg. Technical specifications of the SAHINLER HPK 65 bending machine - number of rollers: 3 - roller diameter: 180 mm - shaft diameter: 60 mm - working speed: 5 m/min ...
Fully refurbished Probat UG22 with chaff cyclone. Main features: Capacity: up to 22kg of green coffee per roast (88kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase, 60Hz (other voltages by request) Gas: natural gas/LPG - modulated burner - separate Siemens motors for every function (drum, exhaust fan, cooling tray arms, cooling fan), enables to roast and cool simultaneously - speed controlled motors on the exhaust fan and drum for maximum control over the roasting process - two digital thermocouples (bean temperature and exhaust temperature) - analog thermometer in the exhaust - new control cabinet with buttons for all the functions doubled by an 10inch touch screen display - Artisan and Cropster connection through RJ45 ethernet cable/socket - new stainless steel cover - new stainless steel cooling tray sheathing - new insulation of the drum - new ...
GEKA HYDRACROP 55/S hydraulic ironworker machine was built in Spain in 2022 by MAQUINARIA GEKA S.L.U. This machine, distinguished by its extensive machining capabilities, is intended for precise hole and corner punching as well as shearing flat bars, angles and solid bars. Each of the 5 work stations is controlled by two hydraulic cylinders, which enable independent or parallel operation at two stations simultaneously. All this makes the offered GEKA HYDRACROP 55 S ironworker machine the perfect choice to significantly increase the productivity of any industrial plant. GEKA HYD 55 S weighs 1200 kg. Technical specifications of the GEKA HYDRACROP 55/S 2-cylinder ironworker machine General data - maximum punching force: 55 t - maximum cutting force: 110 t - number of workstations: 5 - number of hydraulic cylinders: 2 - total power: 5.5 kW - power supply: 400 V; 50 Hz - weight of ...
Machine details Bearing number 1105-03191 Machine type flat grinding machine Make sit Type RP 800 Built in 1991 Control type NC Warehouse LAGER Country of origin Germany Delivery time immediately Freight base from the exhibition hall, free Technical details Grinding length 800 mm Grinding width 400 mm Workpiece height 475 mm Table length 1100 mm Table width 500 mm max. workpiece weight 700 kg Auto. Cross feed adjustable 3-50 mm/stroke Vertical delivery, 1 tick mark 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel bore diameter 76.2 mm Connection voltage 380 V Grinding spindle motor 3.7 / 4.5 kW Total power requirement 4.5 kW Machine weight approx. 4.5 t Room requirement approx. 3500x2000x2700 mm Information Automatic delivery, - Electro-magnetic clamping plate with straight fine pole division, dimensions 800x400mm ...
Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.
YAWEI NISSHINBO HPI 3048 turret punch press was built in 2011 in China by Jiangsu Yawei Machine Tool Co., Ltd. The machine is designed for precision machining of sheet metal with a maximum thickness of 6.35 mm. The machining process is carried out using a reliable work head, operating with a maximum force of 30 tonnes. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and nicks on the workpiece surface and significantly reduces noise levels. This is complemented by an intelligent SIEMENS CNC control with many useful functions. The HPI-3048-36LA2 CNC punching machine weighs 18000 kg. Technical specifications of the YAWEI NISSHINBO HPI 3048 turret punching machine - CNC control: SIEMENS SINUMERIK 802D - number of axes: 5 (X,Y,T,C,Z) - maximum punching force: 30 t - maximum sheet metal thickness: 6.35 mm - maximum sheet metal dimen ...
DURMA TP9 turret punch press was built in 2007 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, distinguished by its high efficiency, is an excellent choice for precision machining of sheet metal with a maximum thickness of 6 mm. The machining process is performed fully automatically by means of a reliable work head operating with a maximum force of 20 tonnes. A 27-station turret cooperates with the head, capable of storing a large number of tools of all sizes and types. The material feed, on the other hand, is carried out on a large brush table, which prevents scratches and scrapes on the workpiece surface and significantly reduces noise levels. The table is also equipped with clamps, responsible for holding the material securely during machining. All this is complemented by an advanced SIEMENS CNC controller with many useful functions. The DURMA TP9 CNC punching ma ...
Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.
Kersten K 2000, 6.6 kw/9 hp Honda four-stroke gasoline engine, electric and manual start device, stepless hydrostatic drive forward/backward 0-4 km/h, differential, wheels 4.00-8", hydraulic plug-in couplings for device drive. Front sweeper F 1000, working width approx. 1000 mm, manually swivelled left and right.
The Okuma MA series is a horizontal machining center with long travel distances for heavy-duty machining. The travels X/Y/X 1000/900/1000 mm. This machine is designed for very high precision and, above all, stability when machining large workpieces. The pallet size is 630 x 630 mm -OSP P200M -BJ 2008 -Cuttng Time 17,500 h -Renishaw Tool Eye -ATC 150 SK50 -2 pallet system -Spindle speed 6000 RPM -B-axis NCB 0.001 degrees -X/Y/Z 1000/900/1000 mm -Mayfran Consept coolant system with chip conveyor & high pressure pump 60 bar In addition, we will be happy to provide you with the all-round carefree package, a tour of our showroom including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and the subsequent service. We operate Okuma CNC service throughout Europe both electronically and mechanically and on top of ...
From business abandonment: We are selling a CNC portal milling machine with a working area of 3200 x 1510 x 300 mm It is used, but is well maintained and runs well. It was used to mill sheet material. Very good e.g. for wood, façade panels or Eternit cuts. It has 3 axes with rack and pinion drive Spindle: Air Cooled HF Spindle ES915 3.8KW S1 4.6KW S6 60% Ceramic/Steel Bearing With ISO30 collets (we supply with) ATC from HSD with Automatic Tool Changer (Air Driven) TOP: A complete replacement spindle is also included, freshly serviced with new bearings! The controller is an eding control on Windows PC, PC is included. A conversion of the Y-axis to 2 x12 Nm closed-loop stepper motor with very precise German Wittenstein gearboxes took place 5 years ago. X-axis runs with 9 NM stepper motor, Z axis too, also has a brake built in to hold the axle. Important and outsta ...
Rubbed machine Sumbel Regent 650; good condition; Working width 650mm; Material thickness 0-30mm. Down pressing machine Sumbel Regent 650; good condition; working width 650mm; thikness from 0-30mm.
Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...
Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Bosch Cartonetta 75 horizontal cartoning machine, bucket infeed, carton size range min. 15 x 15 x 54 mm (LxWxH), max. 92 x 66 x 180 mm (LxWxH), output up to 75 cartons per minute, leaflet folder from stack, reverse tuck closure of the carton flaps, Laetus Argus 6012 bar code reader for folding carton (opposite insertion side), leaflet (both sides) and presence of leaflet inside the carton, emboss coder (2 lines), electrical connection 400V/50Hz, power 4 kW, compressed air 6 bar, machine footprint approx. 2900 x 1300 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 800 kg, retrofitted in 2009 by the company HVS including new Siemens SIMATIC S7-300 machine control system + SIMATIC panel
Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
KlicK board plasterboard production machine was built in 2020 in Poland. The system has been specially designed for the production of innovative gypsum boards, which are used in residential and commercial construction. It features a number of state-of-the-art components with the best technical parameters, which significantly facilitate and accelerate the entire production cycle. The KlicK board plasterboard is distinguished by a unique snap-in section in the form of a click profile. This enables the board to be quickly and easily assembled at right angles, resulting in a stable outside corner. Simply fold the board along the profile and it clicks into the desired shape. During transport, the profile is secured by a transport strip, which is removed when the drywall is delivered to the assembly site. All this makes KlicK board an enormous saving in labour time. The entire production ...
self adhesive labelling machine, work direction: left-right, safety housing, 4 stations,
maximum number of results exceeded
please refine your search
