wash machine used for sale

Machine vise with handwheel adjustment

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Single cutting head strategy ? Chiller ? Automatic pallet changer in longitudinal direction ? Conveyor belt for small parts / slug ? 17 Touch screen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2 laser TruFlow 5000 with optimized standby including beam guidance ventilation with N2 ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC ? Laser power control ? Logbook function laser Cutting head ? Lens cutting head with 250mm focal length ? Universal quickchange device for cutting head (UTI) ? LensLine with status check ? ControlLine: automatic height contr ...

Standard configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 11 tool stations for tools and clamps ? Drives: Maintenance-free, digital three-phase servo motors ? Punching head: Hydraulic system with closed control loop, single tool adapter, 360? rotation of all tools ? Automatic repositioning device with programmable presser foot ? Vacuum slug removal ? Swarf bucket ? Brush tables ? Parts chute 200 x 200 mm and sorting of parts into 2 containers ? 2 parts containers ? Controller BOSCH Type 3, activity-oriented user interface, Online help, diagnostic functions, 3.5 disk drive, BNC/RJ45 connection, TFT color screen 10.4 ? Graphic programming ToPs 2000 ? Safety: CE marking, multi-beam light barriers, rapid hydraulic shutdown Additional equipment ? MultitShear ? MultiBend ? SoftPunch ? Table extension ? Start post

This lot has been tested for operation

TIG & MMA welding machine Functions: hot TIG, lift TIG, CLEAN & MMA Adjustable current: 40-190 Ampere Duty Cycle: 40% Duty Cycle Equipped with: LED color display Includes: TIG torch Includes: MMA torch Connection: 220 Volt Technology: IGBT technology Includes: manual

For Bolt Diameter 6 - 16mm Welding current max. 1200Ampere see pictures for more technical data

Unused Rated Input Voltage: 1P AC380V ±15% 50/60Hz Rated input current: 29A Rated Input Power: 19KVA Open circuit voltage: 280V Output current setting: 30-120A Rated output voltage: 128V Cyclic continuous factor: 60% Efficiency: 80% Insulation class: F Protection class: IP21 Non-contact arc ignition Weight: 38KG Dimensions: 690 x 335 x 575

Standard configuration Machine ? Stable C-frame for easy access ? Coordinate guide for high-precision machining ? Linear magazine, 21 tool stations, 3 clamps ? Drives with maintenance free 3-phase servo motors ? Repositioning unit with programmable stripper ? Ball tables ? Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 Good parts containers ? AutoLas TRUMPF Laser ? Laser unit: TruFlow 2700 CO2-Laser ? Radio-frequency excitation ? Chiller unit ? Laser control: TASC 3 ? Encapsulated beam delivery Cutting head ? Cutting head with 5.0 and cutting head with 7.5 lens focal length ? Cutting head quick-change device ? Programmable cutting gas pressure ? DIAS ? ContourLas Punching head ? Hydraulic punching head, 360? rotation for all tools ? Programmable presser foot for repositioning ? Tool length compensation ? Vacuum slu ...

Standard Configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 5000, radio-frequency excited, chiller, logbook function Laser ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? Laser power control ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? PCS Process Control System ? DIAS capacitive height regulation ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Automatic nozzle cleaning ? Laser cutting head with 5? lens and laser cutting head with 7.5? lens ? Cutting head quick-change device ? Automatic sheet edge detection ? Positioning laser diode ? Programmable power cycles ? Microweld ? Automatic focus adjustment AutoLas Plus ? Oil spray device for reliable thick plate machini ...

Serial number: 24952 Travels: X: approx. 300 mm Y: approx. 450 mm Z: approx. 150 mm with STEPCRAFT MM1000 milling unit, year of manufacture 2019 Reference: Wittner - Lot 64

Condition: unused, in the original packaging Portable Welding Machine Adjustable amperage: 10-130 amps Electrodes: Suitable for electrodes from 1.6 to 3.2 mm Ø duty cycle: 25% duty cycle Equipped with: LED display Includes: MMA torch Connection: 220 volts Technology: IGBT Technology Function: Electrode Welding (MMA) Equipped with: "Hot-start", "Arc Force" & "Anti-sticking" function Features: Small size, lightweight, portable and easy to use Including: manual

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Gantry drive in combination with direct linear drives ? Automatic pallet changer ? Longitudinal conveyor ? Enclosed beam delivery system ? One cutting head strategy ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 6000 with optimized stand-by mode ? Maintenance-free radial turbine blowers ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device UTI ? LensLine with condition checking ? ControlLine: Height regulation and sheet edge sensing Control ? SIEMENS Sinumerik 840D ? Technology data is integrated ? Colour screen ? Automatic shu ...

Standard Configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? Chiller ? Automatic pallet changer lengthwise installation ? Longitudinal conveyor ? 17 touch screen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 including NitroLine, with optimized Standby Modus ? beam tube purge with nitrogen ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Laser control TASC 3 ? Laser power control ? Logbook function Laser ? Laser cutting head ? One cutting head strategy ? LensLine with status check ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) ? ControlLine: Height regulation and sheet edge detection Contr ...

Engine won't start!

Sold with contents. Batch that is part of a combination of batches

Belt width: 65 mm incl. whetstone, diameter: 110 mm

Equipped with IGBT inverter with high duty cycle; mains voltage 400 V / 50 Hz, 3 phase; Output current 40-350 A; duty cycle 80%; welding wire diameter: 0.8-1.2mm; recommended sheet thickness: 0.5-12mm; wire feed: 4-roll; synergy mode; double pulse function; VRD; 2T/4T function; memory; 5 languages; New in box

17 pieces M10 x 1/ 8 pieces M10 x 1.25 / 2 pieces M12 x 1/ 3 pieces M12 x 1.5 / 3 pieces M14 x 1.25 / 45 pieces M14 x 1.5 / in 2 cardboard boxes

Standard Configuration Machine ? Closed machine frame ? Integrated cabinet ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Chiller ? Automatic pallet changer lengthwise installation ? Enclosed beam delivery via laser light cable ? Integrated electrical cabinets with inside light ? Wide longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Work area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine ? Automatic nozzle cleaning TRUMPF laser ? External solid state laser TruDisk 4001 with 1 fiber optic cable laser output ? Stimulation via pump diodes ? Laser power control Cutting head ? Universal cutting unit ? One cutting head strategy ? Protection glass to avoid lens contamination ? Online protection glass monitoring ? ControlLine Control ? Easy shop floor programming ...

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 3200 with optimized standby ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? LensLine ? ControlLine: Height regulation and sheet edge detection  ...

Working condition unknown.

Standard Configuration ? Stable C-frame ? Coordinate guide with integrated linear magazine, 19 tool stations,2 clamps ? Drives: Maintenance-free, three-phase servo motors ? Programmable presser foot for repositioning with preselectable pressing force ? Sensor-monitored part chutes 500 x 500 mm for punching and laser station, ejection cylinder on the laser chute ? 2 good parts containers ? Laser unit: CO2 laser TLF2700, radio-frequency excited, insulated against vibrations, integrated in machine frame, incl. chiller, and laser control DIAS 3 ? High speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Punch stroke / thread counter ? Laser cutting head: 5? lens, quick-change device, height regulation APC ? Additional laser cutting head with 7.5? lens ? Punching head: Hydraulic single tool adapter, 360? rotation of all tools,  ...

Standard configuration ? Closed machine frame with integrated laser unit ? Laser unit: CO2 laser TLF 6000, radio-frequency excited, maintenance-free turbo radial blowers, chiller, logbook function ? Automatic pallet changer and longitudinal conveyor for small parts / slag ? Drives: Gantry drive in combination with linear direct drives ? HI-LAS high pressure cutting ? Plasma sensor system PSS ? Automatic sheet edge detection ? APC Advanced Process Control ? PCS Process Control System ? Programmable power cycles ? Microweld ? Automatic nozzle cleaning ? High-speed processing with SprintLas ? ContourLas for producing small holes ? Programmable cutting gas pressure setting ? Laser cutting head with 5? lens and laser cutting head with 7,5? lens (for TLF 6000) ? Cutting head quick-change device ? Positioning laser diode ? Automatic focus setting AutoLas Plus ? Laser power control ? Oil spray ...

Rated Input Voltage 220 Frequency Hz: 50/60 Rated Input Capacity Kw: 7.5 Rated Input current A: 42 Duty cycle 40C 10 min

Equipped with Magnetic Column Drill; 3x screw-in handles; Lashing strap; Reservoir for cool oil; 230V; Magnetic force: 16000N; Power: 1600W; Rotation speed: 810rpm; Core drill diameter: 35mm; Maximum cutting depth: 35mm; Stroke: 210mm; Weight: 14kg 17kg packaging dimensions lxwxh - 520x165x430 mm; Unused in box

Equipped with input power: 7.6 kVA; input voltage 1-phase 230 V AC 50 Hz; duty cycle 45%; protection class: IP21S; Max cutting thickness: 12mm steel; Unused in box

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

Forte BA 321 Automatic Band Saw - With hydraulic clamping and feeding device - Cutting range around 320 mm - Square 300 x 300 mm - Large section length for single stroke up to 400 mm - Multiple feed up to 10 x 400 mm - Saw blade dimensions 3660 x 25 x 0.9 mm - Cutting speed infinitely variable 20 - 100 rpm - Feed speed hydraulically infinitely variable - Coolant device - Material support height 720 mm - Saw blade - Drive 400 V / 2.5 kW - Space requirement approx. W 1950 x H 1250 x D 1500 mm - Weight approx. 1000 kg

Standard configuration Machine ? Closed machine frame with integrated laser unit ? Motion unit for high precision processing ? Torque drive in combination with direct linear drives ? Enclosed beam delivery system ? One cutting head strategy ? Chiller ? Automatic pallet changer, lengthwise installation ? Longitudinal conveyor ? Ergonomic control panel with Touchscreen ? Working area lighting ? Positioning laser diode ? Spray device ? PierceLine ? FocusLine ? NitroLine ? PlasmaLine Trumpf Laser ? CO2-Laser TruFlow 5000 with optimized standby, purged with nitrogen and LensLine ? Maintenance-free radial turbine blower ? Radio-frequency excitation ? Gas mixer (integrated) ? Laser control TASC ? Laser power control ? Logbook function Laser Laser cutting head ? Laser cutting head with 250 mm lens ? Universal quick-change device (UTI) incl. bus connection ? ControlLine: Height regulation and ...

Machine including Liftmaster.

For sale we offer a strapping machine Model TV02 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. The fully automatic strapping machine TV 02 convinces with maintenance-free direct drives and Simplest operation. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Conveyor belts with four belts Strap closure off-center SPECIFICATIONS Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm min. 160 mm Height: max. (without press) 650 mm (with press) 550 mm min. 10 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx.  ...

Silca key cutting machine type rekord, see photos

For sale we offer a strapping machine model TW01 of the manufacturer Schneider&Ozga. Condition very good, like new, never used. Strapping performance of 30 packages easy and 15 packets in parallel per minute Strapping width from 5 to 12 mm Different frame sizes Transport Rollers Specifications: Achievement Up to 30 individual strappings/minute Up to 15 double strappings/minute Size of the packaged goods Width: max. 600 mm max. (with side straps) 460 mm min. 160 mm Height: max. (without press) 500 mm max. (with press) 400 mm min. 30 mm Package weight 25 kg Strapping material Polypropylene tape (PP tape) Width:5 -12 mm Thickness: min.0.35 - 0.70 mm Type of closure Thermo welding closure Reel Core diameter: 200/228 mm Outer diameter: approx. 450 mm Width: 165-210 mm Electrics 230 V, 1 phase, 50 Hz Power consumption 1,1 kW at 230V Pneumatics Operating  ...

Model: RUA 1000 Equipment: Coolant lubrication and filtration system Accessories: Wheel flanges and supports Order: Front control panel with manual controls Status: Used condition with traces of oxidation and wear Additional information: Conventional cylindrical grinding machine with metal guards and coolant system

Cutting machine for rolls Wabäma complet in chrome steel Horizontal cutting machine Max cutting compound: Width: 135 mm Height: 50 mm with infeed and discharge conveyor New: Teflonized knife, conveyor belt Pressure belt and conveyor belt Mass: Length: 1900 mm Inlet height: 1000 mm Depth: 700 mm Connection: 380 V Condition: very good, Repaired

Box size 475x325x350mm; Mig 50A/16.5V-200A/24V; MMA 20A/20.8V-200A/28V; TIG 20A/10.8V-200A/18V; 7672

Rated Input Voltage: 1P AC220V ±15% 50/60Hz Rated duty cycle: 40% Efficiency: 80% Insulation class: F Protection class: IP21 Weight: 9.4 kg Dimensions: 396X142X268 TIG: Rated input power: 4.8 kVA Rated input current: 27A Open circuit voltage 56V Output current 20-190A Output voltage 190A / 17.6V MMA: Rated input power: 6.6 kVA Rated input current: 37A Open circuit voltage 80V Output current 20-170A Output voltage 170A / 26.8V

3 pieces diameter 63 mm/ 4 pieces diameter 80 mm/ 3 pieces diameter 100 mm/ 1 piece diameter 125 mm/ unused and in original packaging

Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it.

WEINIG moulder model UNIMAT 17A with 8 shafts: -useful working measures 170x120mm -gimbal towing and pneumatic pressure -variable feed speed from 6.3 to 36.5 mt/min -Double wheel of upper feed before the 1st shaft -tandem feed groups in front of the 2nd and 4th shaft -fluted plane from 1st to 6th shaft -2000mm long entrance plane -manual lubrication pump of the table Tree layout: 1-under 2-right 3-left 4-right 5-above 6-under 7-above (free space below)    8-Universal

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5)