wartsila gas used for sale

Key data: 300

JENBACHER 208 300 kW Generator Set. The J208 engine is in excellent condition. The previous owning company completely rebuilt the engine for a project that was canceled when the company closed and went into liquidation. The engine can operate with Natural Gas, LPG and Syngas as it is. Year: 1994 Hours: 60.000 Capacity: 300 kW Hz: 50 Voltage: 400V Scope of supply: engine, alternator. - CONTROL SYSTEM NOT AVAILABLE - We have verified the authenticity of the engine rebuild through an on-site inspection. An endoscopic examination indicates that the pistons, cylinder liners, con rods, and bearings have been replaced and are new. There is no sign of wear or previous combustion in the cylinders. The alternator's bearings have been replaced too. The endoscopic photos show that the turbo has also been replaced, and the intercooler grille is new. An external check reveals  ...

Gas stove with electric ovenMKN type 2163403-02 with 4 burners, 2 large, 2 slightly smaller. Is used and functional. Oven inside Dimensions: W.: 53 cm, D.: 50 cmOutside dimensions W.: 80 cm, D.: 70 cm, H.: 88 cm

Power: 5000 kVA / 4000 kW Year of construction: 12/1992 Current: 275 A Voltage: 10.5 KV Frequency: 50 Hz Rotation: 1500 rpm Weight: Approx. 13.6 to. Protection class: IP 23 In 2017/2018, the following work was carried out: Stand winding in insulation class F completely renewed Inductor finely balanced and refurbished at nominal speed Reman refurbished plain bearings Other parts overhauled Tested and test run 2019 Prior sale reserved - errors possible

Caterpillar G3412 - Overhauled - 419 kW - 6ZM

Caterpillar G3516C - Unused - 1555 kW - G7E

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...

(1) Gas (2) Fuel (3) Electric: 0   Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm

Used exhaust gas heat exchanger Aprovis, functional; Price net EXW

Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

Key data: 2700 , 11000

Jenbacher 620 Natural Gas Generator Set. This engine has been maintained by the official Jenbacher distributor. Model: J620GSE01 Year: 2001 Hours: 14,000 Capacity: 2.7 MW Fuel: Natural Gas Voltage: 11,000 HZ: 50 Scope of Supply: Engine, Alternator, Base frame, Comap Control Panel, Gas line, External cooling table Engine cell ventilation including louvres and filters 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board Plus all other controls and cabling. Generator is installed and heated. Engine has 5,000 starts so needs a service. This generator has an issue with the coupling. Dismantling is the responsibility of the buyer.

Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg

Complete 10MW Jenbacher 6 Series natural gas power plant. These engines have been maintained by the official Jenbacher distributor. Capacity: 10MW Fuel: Natural Gas Year: 2001 Hours: 12,000 - 14,000 V: 11,000 HZ: 50 Scope of supply: 3 x Jenbacher J620GSE01 11Kv 12,100 - 14,100hrs 1 x Jenbacher J616GSE01 11Kv 14,000 4 x external cooling tables 4 x upgraded Comap control panels 4 x engine cell ventilation including louvres and filters 4 x 500L 3-4 Barg gas compressors Hawker Siddeley 11Kv switch board (one per gen plus main) 11/33 15MVA export transformer 11/414 import transformer Waste and fresh oil tanks Plus all other controls and cabling.

Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air

Technical data Max. temperature: 500 °C

Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device

Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...

TPL69-A30 TURBOCHARGERS FOR SALE

Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...

ABB TPS61-F33 EXHAUST GAS TURBOCHARGERS FOR SALE

Gas type : biogas Power 1250 kw Speed 1500 rpm with container

- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating  ...

JENBACHER MOD. J612 GS C02 YEAR: 1998 HOURS: 55000h ELECTRICAL POWER: 1472 kW - 400V AC 50Hz The equipment is stowed and ready to load. SCOPE OF SUPPLY: The following are integral parts of the generators and groups necessary for their commissioning (gas input, power output): GENSET: Engine JENBACHER J612 GS C02/ 1472 kWe Year 1998, Operating hours: 55000h. Alternator STAMFORD / 1840 kVA - 1472 kW- 400V AC 50HZ Generator (alternator, motor and motor PLC) Generator Control Panels (DIANE XT) Auxiliary control panels Low voltage switch Gas train Silencer Pumps Technical documentation. You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...

TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Caterpillar G3516 - Used - 1000 kW - 4EK

Key data: 999 , 400

4 x MTU 8V4000 GS MIP + MMC for sale. Series 4000 four-stroke turbocharged gas engine with mixture cooling - compact, high performance, reliable, maintenance-friendly and extremely economical. Lean mixture technology, state-of-the-art electronic ignition system with individual ignition timing and automatic ignition power control, anti-knock control as well as highly responsive mixture and load control ensure economical and safe genset operation with optimum use of the energy input. Island operation capability. Make and Model: MTU 8V4000 GS MIP Capacity: 999kW Hours: 0 Year: 2023 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator (Stamford), Base frame, MIP (MTU Interface Panel), MMC (MTU Module Control - The MMC contains the cogeneration control system including mains monitoring, visualization and user interface). Price: €285,000 each Plea ...

Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...

Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request

Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request

Key data: 750 , 400

(Deutz) MWM2016 V16 Natural Gas Generator Set Model: (Deutz) MWM2016 V16 Fuel: Natural Gas Year: 2007 Hours: 40,460 Capacity: 750 kW Hz: 50 Voltage: 400 V Scope of supply: Complete containerised genset including Engine, Marelli Generator, Frame, Control System, Gas Line, Radiator, Gas Filter and other accessories . Complete contarised genset. Very good condition. Turnkey ready to run now. A new crank was installed on 35,000 hrs. Available for Sale Now.

One complete engine and some spare parts for Jenbacher J620

Key data: 1500 , 400

2 x JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 65,000 & 63,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories . Service History Status: Rebuild in April/May 2022, cost €260,000. Available for Sale Now. Price: €180,000

Key data: 1500 , 400

JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: 60,500 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Rebuild in April/May 2022, cost €160,000. Replaced: piston lining, heads, and everything else common to rebuild. Not replaced: pistons, connecting rods, still within good range. Available for Sale Now. Price: €140,000

Key data: 1500 , 400

2 x JENBACHER JMS420GS-B.L Biogas Generator Set Model: JMS420GS-B.L Fuel: Biogas Year: 2012 Hours: Generator 1: 57,000. Generator 2: 54,000 Capacity: 1500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system (XT3 control), Gas line, Heat exchanger and other accessories. Service History Status: Well maintained by Jenbacher certified maintenance company. In need of service. Available for Sale Now. Price: Generator 1: €100,000 Generator 2: €105,000

CHP with generator Stamford, electrical output 190 kWel., customer property, variant as building integration, without exhaust gas heat exchanger

Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white  ...

Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual  ...

Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...

Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...

3 PIECES JENBACHER 320 AVAILABLE All sets are in perfect condition, inspection is possible. Directly available from our warehouse. Contact us for more information. GAS POWER HOLLAND

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

Key data: 1500 , 400

2 x JENBACHER Jen 420-GS-B25 Biogas Generator Set. Model: Jen 420-GS-B25 Fuel: Biogas Year: 2012 Hours: 73,000 and 74,000 Capacity: 1,500 kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Frame, Control system, Gas line, generator switch and other accessories. Service History Status: Rebuild done at 60,000h. Available for Sale Now. Price: €150,000 each

Available for sale 1 x 260 kW Gas genset Guascor SFGLD 180. Unit prepared to work in isle mode. The genset is in our installations and is in great working conditions.

Available for sale 1365 kW MWM TBG 620 V16 inside container. Equipment in good working conditions.

Available for sale 1365 kW MWM TBG 620 V16 K. Equipment in good working conditions.

Available in stock 1 x Complete Containerized Gas Power Plant based on 1 x 725 kW Guascor FGLD 480. The power plant is mounted in a 40 ft container with its corresponding alternator, gas connection with regulation system, electronic control system and rest of auxiliaries (batteries, refrigerators, switches and control cabinets). Manuals and electrical diagrams are also available. The unit is in our warehouse - ready to go. Equipment in good working conditions.

For sale a Dresser and Wayne CNG natural gas tap in good condition.