129,270 used machines on RESALE, but how to find them? Machine Search
We are pleased to present an exclusive offer for two fully re-manufactured SGT-300 gas turbines with a mechanical drive configuration (8 MW) and one gearbox (1500 rpm, 50 Hz), originally manufactured in 2018. These units have been fully overhauled to zero hours, providing up to 48,000 operational hours, and were serviced in a Siemens-approved workshop. Key Features – 8 MW Mechanical Drive: • Power output: 8.4 MW • Efficiency: 35.3 % • Heat rate: 10,204 kJ/kWh (9,666 Btu/kWh) • Exhaust temperature: 490 °C (914 °F) • NOₓ emissions: ≤ 15 ppmvd • Fuel flexibility: Natural gas, liquid fuel, dual fuel Commercial Advantages: • Offer price including gearbox: on request • Ready for immediate deployment • Siemens-approved quality and service, zero-hour units This is a rare opportunity to acquire high-performance turbines ...
used
Recon Part Number: 1227 8128 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sold only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...
We sell our M.A.N. spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the cylinder head. Feel free to take a look and send us your inquiry. You are also welcome to buy the entire stock. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engin ...
Key data: 588 V
2 x Jenbacher 320 Wood gas / Syngas. We have for sale a complete generating station for syngas, including gas line, circuit breaker, control panel and radiator. Two low-hour wood gas / syngas generators in great condition. They are currently set for wood gas / syngas. All wiring between control panel and alternator has been marked up. Available for immediate delivery. For use on gas from pyrolysis plants, gasification plants, woodgas and synthesis gas. Capacity: these generator sets are rated at 588kW for syngas. If they are run on other gases they could produce 720kW. Make and Model: Jenbacher 320 Fuel: Wood gas / Syngas Year: 2008 Hours: 5,000 Capacity: 588 / 720 kW V: 400 HZ: 50 Scope of supply: Engine,Alternator, Frame, Control panel, Switch panels, Dual gas lines, Radiators and other accessories. Price: Please Apply Various Original Jenbacher con ...
Machine type: MIG/MAG welding system Make Oerlikon Type Minicito 304 Connection voltage 3 x 400 Volt Adjustment range 35 – 300 amps Duty cycle 35% ED at 300 amps 60% ED at 230 amps 100% ED at 180 amps Current setting: 14 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder toothed 4-roller gearbox Fuse protection 16 amps Dimensions L x W x H 950 x 400 x 820 mm Weight 80 kg Age approx. 15 years Condition workshop-tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 1 piece pressure reducer 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece of hand shield 1 piece of protective glass 10 DIN 1 piece of glass attachment white 1 spare ...
Machine type: MIG/MAG welding system Make MERKLE Type OptiMIG 351 DW Plant no.: 129.187 Connection voltage 3 x 400 Volt Adjustment range 25 - 350 amps Duty cycle 60% ED at 350 amps 100% ED at 300 amps Current Adjustment 28 Switching Levels Cooling transformer by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case Wire Feed Gearbox 4-Roller Gearbox DV 26 Fuse protection 32 amps Dimensions L x W x H 990 x 510 x 1,135 mm Weight 210 kg Optional Accessories Volt and Ampere Digital Display Automatic wiring Age 24 months Condition workshop-tested, like new, incl. UVV workshop test report Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece of ground cable 4 mtr. long, 70 sq mm 1 piece of pressure reducer argon with 2 pressure gauges 1 ...
Fives Pillard Gas Burner GRC-G3 Burner from 2015. 19.75 MW x 21,000 m3/h. Manufacturer: Fives Pillard Model No.: GRC-G3 Type: Gas Burner Serial Number: 205991C3 / 205991C3 Heat output [MW]: 2.82 – 19.75 Air flow rate [m3/h]: 3,600 – 21,000 Year of construction: 2015 Hours:– Weight [kg]: 610
Used packaging machine by Multivac type R 245. New 2010. Packaging machine: - produces vacuum and aerated packaging from deep-drawn and sealable bottom soft or thick film, combined with sealable top film. - has two packaging formats : 250g cube with pack size 145x92.25x approx. 40 mm 500÷600g cube with pack size 188.5x145x approx. 40 mm Power supply 400 V / 50 HZ 3/PE AC phases Rated power 15 kW Nominal current 39 A Max. precharge 50 A
From our current stock we sell 7 cylinder heads with the M.A.N item number / spare part number 51.03101.6923. ( New ). Our item number: 58031001. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how. Draw on ...
Key data: 600 KW, 750 kVA, 230 V
2 x 300 kW Cummins Natural Gas Gensets in Soundproof Container, 600 kW Total, Steam Heat Recovery For sale: containerized natural gas power generation package consisting of 2 x 300 kW Cummins gas gensets installed in one soundproof container, including synchronization system for parallel operation and steam-type exhaust gas heat recovery system. Total electrical output in parallel operation: 600 kW. Offered manufacturer package is based on Cummins 15NG-330 gas engines, Leroy-Somer alternators, Woodward ignition/speed control, and DEIF AGC150 controller. Main technical data Quantity: 2 units Rated power: 300 kW each Total power in parallel: 600 kW Fuel: Natural gas Engine: Cummins 15NG-330 Engine rated power: 330 kW Cylinders: 6 Displacement: 14.5 L Rated speed: 1500 rpm Alternator: Leroy-Somer TAL-A46-H Voltage: 230/400 V Frequency: 50 Hz Powe ...
2 x MTU 20V4000L63 complete power plant for sale 2 x 20V4000L63 generating sets total Each genset is 220 Kw at 1500 RPM total about 4.4 Mw with Stamford alternators system is 50 Hz and 2800 Kva Running hours are 20.000 and 30.000. respectively Gen sets year of manufacture is 2010
Key data: 526 KW, 910 kVA, 400 V
Jenbacher JMS 312 GS-B.LC - Container Design Number: F866 Year of construction: 2009 Country: Switzerland Site Name: Aarberg Module number: 803588 Engine number: 6128071 Serial number: 323762 Engine type: 312 Engine version: C225 Gas type 1: Biogas Control System: Dia.ne XT Power Output: 544 kW Electrical Output: 526 kW Thermal output: 505 kW Alternator: NEWAGE Type: HCI 634 H2 Type Rating: 910kVA Voltage 400V Frequency: 50Hz Turbocharger: PBST Type: TCR12-42516 Actual OH: 126,000 Starts: 5543 Service: Equipment was serviced by IWK (authorized Service Partner of INNIO for Switzerland). At 60k OH the Longblock was exchanged, at 105k OH the Minor Overhaul (40k) was done. Till next Major Overhaul the engine has approx. 15k OH left.
For sale on "as is" basis Used Solar Gas Turbine Mars 100 SoLoNOx Natural Gas Location: Europe Year of manufacture: 2012 Output Power: 11,350 kWe Heat Rate: 10.935 kJ/kWe-hr (10.365 Btu/kWe-hr) Exhaust Flow: 153,245 kg/hr (337,950 lb/hr) Exhaust Temperature: 485 °C (905 °F) Frequency: 50 Hz Package hours: 27206 Gas turbine hours: 20547 Number of starts: 216 Housed on skid installed indoor with attenuating enclosure and fire detection and suppression system. Inlet System Barrier Filter and Silencer mounted on ancillary skid on the roof of the enclosure. Gear Reduction Box RENK MAAG GmbH. Type: GPF3-28, Output Speed/Freq. 50Hz - 1500rpm Generator Data: Electric Brushless AC Generator with Permanent Magnetic Alternator. Alternator data: 2.2kW. PF.9. 1 Phase. 240V/10A/120Hz. Gen Skid includes Lube oil tank, pumps, filters, start system with AC Direct Drive AC Motor, VFD, ...
Key data: 2000 , 690
We are selling our Natural Gas power plant based on a Jenbacher 616 GS C02 genset with 2000 KW power output, The engine is new from ocober 2014
Key data: 3155 , 10500
Make and Model: Rolls Royce KVSG 18 G4 The engine is from 1994. It had a full rebuild in 2004. Fuel: Natural Gas Capacity: 3155kW Hours: 63,000 HZ: 50 V: 10500 Scope of Supply: Engine, Alternator, Base frame, Acoustic Container, Exhaust Gas Heat Exchanger, Control panel and synchronisation panels. Please note: circuit breaker and transformers are not included. Price: €200,000 Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Manufacturer: Fronius, remote control RCU5000i Univ.SD -Art.No.: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Piston: Ø 40 mm -Piston housing length: 377 mm -Piston rod: Ø 20 mm -Recording hole: Ø 14 mm -Price: per piece -Number: 3 pieces -Dimensions: Ø 40 x 530 mm -Weight: 1.5 kg/piece
TAURUS 70 Gas Turbine Year Of Make: 2004 Total running hours: 58.000h Total hours since last overhaul 28.600h Turbine 15158 RPM 60 HZ / 15143 RPM 50 HZ Alternator 1500 RPM 50 HZ 7200 Kw at 9000 KVa 11000 Volts
Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg
Shock absorber, gas spring, shock absorber -Shaft: Ø 35 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 8 pieces available Price: per piece -Dimensions: 75/160 mm -Weight: 3.8 kg/piece
Key data: 790 V, 1000 , 400
Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200047 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford PE734C2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number:– Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513
Shock absorber, gas spring, shock absorber -Shaft: Ø 50 mm -Shaft length: 28 mm -Bore: M8 -Quantity: 5 pieces available Price: per piece -Dimensions: 95/170 mm -Weight: 6.6 kg/piece
Key data: 790 V, 1000 , 400
Deutz MWM Gas Generator TBG 620 V12 gas-fired power generators from 1998, Motor and generator on base frame. 1 available 738 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I634K2, 1,000 KVA Gas engine Deutz MWM TBG 620 V12 Manufacturer: Deutz MWM Model: TBG 620 V12 Type: Gas Engine Serial Number: 2200073 Power [KW]: 790 Year of construction: 1998 Hours:– Weight of aggregate [kg]: 7.800 AC Generator Stamford HC I634K2 Manufacturer: Stamford Model No.: HC I634K2 Type: AC Synchronous Generator Serial number: 0095677/01 Power [KVA]: 1,000 Voltage [V]: 400 Frequency [Hz]: 50 Electricity [A]: 1443 Speed [1/min]: 1,500 Year of construction: 1998 Weight [kg]: 2513
Gas cylinder trolley, gas cylinder cart, steel cylinder cart -Transport trolley: galvanized version -Tires: pneumatic -Quantity: 1 piece available -External dimensions: 760/520/H1320 mm -Own weight: 19 kg
GE LM 2500 gas turbines 2 pcs available Power:24.000 Hp each Average working hours 1700 hours
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: solid rubber -Number: 1 piece car available -Price: per piece -External dimensions: 730/520/H1325 mm -Own weight: 26 kg
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg
AVAILABLE COMPLETE CHP JANBACHER 616 - Yeard 2010 With 2500kva transformer Exchanger - CHP - PANEL - complete .
Perkin Elmer HS 40, Headspace sampler for 40 vials, max. temperature + 210 Celsius, min. +35 Celsius, fits all gas chromator graphs,
used
Key data: 1067 KW
we are looking for a Jenbacher 3 1067 kw we have a biogas plant
Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg
Inert gas welding device, inert gas device -Max. Welding power: 340 A. -4 roller drive -Water-cooled -Incl. Ground cable -with removable wire feeder -Hose package length: 4000 mm -Dimensions: 1100/515/H1170 mm -Weight: 214 kg
Sample gas cooler -Measuring gas cooler with: protective lining -Connection: 240 volts -Dimensions: 335/560/H390 mm -Weight: 32 kg
Agilent 5975C inert MSD with GC 6890N Agilent 5975 C inert MSD, Agilent GC 6890 N Pfeiffer Turbomolecular Pump, Electronic Ionization/EI ; GC Injector Split/splitless, EPC, LAN Agilent Backing Pump, Software Agilent MSD Chemstation for Win10
Key data: 1950 , 2437 , 11000
Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average
Shock absorber, gas spring, shock absorber, start-up damper -Pipe: Ø 82 mm -Total length: 510 mm -Hole diameter: Ø 24 mm -Number: 2 shock absorbers available Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece
Shock absorbers, gas pressure springs, shock absorbers, start-up dampers, impact absorbers -Shaft: Ø 39 mm -Shaft length: 470 mm -Recording hole: Ø 17 mm -Number: 4 pieces of shock absorbers available -Price: per piece -Dimensions: 1755/140/H100 mm -Weight: 24 kg/piece
Key data: 261
Complete 2G Agenitor 406 261kW biogas generator set. We have a frame and control system along with all the other balance of plant from 2015 with 50,000hrs and a block from 2019 on 28,000hrs. Agenitor 406 Power: 261Kwh Hours: 28,000 Year: 2019 HZ: 50 Voltage: 400 Fuel: Biogas Scope of supply: Engine, Alternator, Base Frame, Gas Line, Control Panel, Circuit Breaker, Heat Island, Cooling Radiator, Silencer and Cabling. Photos 1 to 4 are of the 2019 block. Photos 5 to end are of the 2015 frame. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Remote control -Manufacturer: unknown -Type: Poti -Number: 1x controls available -Price: per piece -Dimensions: 155/105/H130 mm -Weight: 2.7 kg
GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz Total 2 nos.
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.065 -Connection: DN65 -Pmax .: 700 mbar -Dimensions: 285/190 / H210 mm -Weight: 8.3 kg
Solenoid valve, butterfly valve, flap valve, solenoid valve, solenoid valve, solenoid gas valve, gas solenoid valve, double gas valve, gas valve -Manufacturer: Siemens, double gas valve -Type: VGD40.040 -Connection: DN40 -Pmax .: 1000 mbar -Dimension: 235/170 / H195 mm -Weight: 6.9 kg
Spiral wound gasket, labyrinth body gasket, flange gasket, high pressure gasket -Manufacturer: Frenzelit, flat gasket Novatec Premium -External: O 162 mm -Inside: O 116 mm -Thickness: 2mm -Number: 107x seal available -Price per piece -Minimum purchase: 10 pieces -Weight: 0.05 kg/pc.
Key data: 70
MAN E0836 E302 CHP Unit in Acoustic Canopy for Sale. Capacity: 70kW Hours: 4,500 Year: 2011 Fuel: Natural gas Voltage: 400 Hz: 50 Scope of supply: Engine, Alternator, Control Panel, Acoustic canopy, Canopy fan, Engine water pump. Footprint of the combined heat and power unit is 3.4 meters x 1.14 meters including the control panel. It has been serviced every 1000 hours. The unit is not due an overhaul until 24,000 hours. Engine has been barred over, and the canopy fan and engine water pump have been powered up. The unit is in a warm boiler room so is in good condition. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.
Spiral wound gasket, labyrinth body gasket, flange gasket -Spiral seal: Flange seal according to DIN EN 12560-2 5 pieces/package -Type: 2 1/2 150lbs 1.4404/PTFE -Dimension: Ø124 x 2mm -Price: complete -Total weight: 0.7 kg
For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.
maximum number of results exceeded
please refine your search
130 € 
