wartsila 32 used for sale

Engine Brand: CATERPILLAR, Conditie: USED, Nominal Power @ Nominal Rpm: 105.1 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 114.3 mm, Stroke: 127 mm, Engine Capacity: 10400 cc, Qty Cylinders: 8 Qty, Nominal Rpm @ Nominal Power: 1800 Rpm, Engine Fuel Type: DIESEL , Engine Cooling Type: Exchanger (on engine) , Engine Color: Red , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Working Hours: 1221 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , Rated Power: 175 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/caterpillar-3208-03z-4w086 0-used/22409, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 03Z-4W0860; Transport weight [kg]: 1150

The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...

Keyence Agilista 3200. Yera 2017. Attached is a photo of the operating hours counter from January 19, 2013. In the meantime, around 100 hours of printing have been added. The device is technically in good condition. Find more here - / Contact us at -

2014 KOCEVAR & SONS R-94-K0LQ-320/750-DD160 Find more here - / Contact us at -

2012 Chiron DZ 12 KWM HS 328-03 Profile CNC machining centre Chiron milling machine - double-spindle - with pallet changer - HSK-A63 Accessories and tools are not included. We still have a few holders (shrink fit chucks) that we can provide. A chip conveyor from Knoll is included, as well as a cooling tower from DeltaTherm. Technical data Year of construction 2012 Axis travel: X 550 / Y 400 / Z 360 mm Spindle distance in X-axis: 250mm Weight: 7700kg Tool magazine: 16 places per spindle Tool holder HSK-A63 Fanuc 31i-A5 - 5-axis contouring control Fanuc tool life monitoring Integrated workpiece changing device IWW 0/180° Spindle speed 15000 rpm, max. 45Nm Speed acceleration / deceleration from 0 to 12000 rpm in 0.6 seconds Chip conveyor with scraper belt Coolant system KF 150/FKA500 Chiron maintenance instructions on screen Operating hours and parts counter Oil-fre ...

2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

JAFO FWF 32J universal milling machine was produced in 1990 in Poland by Jarocińska Fabryka Obrabiarek JAFO S.A.. The machine designed for precision machining of workpieces is characterised by high functionality, versatility and reliability. The machine body, built from high quality cast iron, is equipped with, among others, a pull-out beam with its own drive and a table with a large working area. The reliable vertical torsion spindle works with a range of modern tools, making the machine the ideal choice for unit and batch production. The JAFO FWF32J vertical milling machine weighs 2800 kg. Technical data of the JAFO FWF 32J milling machine - feed in the X/Y/Z axis: 900/300/450 mm - work table surface (L x W): 1250 x 315 mm - vertical torsion spindle - horizontal spindle - spindle taper: ISO 40 - pull-out beam with drive - workplace illumination - installed power: 12,5 kW - ...

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

TRUMPF TruFlow 3200 Trulaser 3030 (2007) Type of Current - 50 Hz Voltage - 400 V Rated power - 73 kVA Control voltage - DC 24 V Year of manufacture - 2007-08-15

Specifications: Working length: 3240 mm Bending capacity steel: 4.0 mm Bending capacity stainless steel: 3.0 mm Bending capacity aluminum: 8.0 mm CNC control: SIEMENS Simatic HMI Bending angle adjustment: 0 – 150° Upper beam opening: 350 mm Infinitely variable bending speed Programmable Backstop Hydraulic upper tool clamping Motor power: 7.5 kW Dimensions (length x width x height9: approx. 5000 x 2450 x 2200 mm Weight: approx. 7 to

Key data: 350 mm, 100 mm

Automatic with power gearbox also for high-alloy materials.

STAMA MC325 / S 2-palllet Double fourth axes Spindle 9000 rpm / 36 tools priced to sell low price - good deal The machine is visible in our warehouse in Gussago BS., Mimu Machine Tools, Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets, CNC type: Siemens, Fourth axis: 2 + 2, Number of pallets: 2, Spindle speed RPM: 9000

Key data: 450 KW

New / unused ! Sale from our stock MAN E3262 LE202 450 kW . Also with engines sale alternator Meccalte ECO 40 2L4 , 680 kVA 230/400. All are new from factory! All question to sandisbscgroup.eu

Control: Heidenhain iTNC 530 Travel: X-axis F/H: 3,220 / 2,600 mm Y-axis 800 mm + 65 mm Z-axis F/H 850 / 1,000 mm T-slots 7 pieces Mount: SK 40 Tool magazine: 100 – compartment Spindle speed: 50 - 12,000 rpm Equipment - Internal cooling (IKZ) 20 bar - Belt filter coolant 1250 l -Conveyor - Laser Tool Control System TM200 - Rinsing gun - Electrostatic exhaust air filters - Electronic handwheel -Partition - 2x LTA suction - Prepared for 5th axle

Inv. Num. : 8191 Type: Xpert 320 Producer: Bystronic Created: 2018 Parameters: Compressive force: 320 t Maximum bending length: 4100 mm Lifting height: 565 mm Motor power: 30 kW

Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested English language Type: Horizontal Drive: Hydraulic Machine hours: 53000

x-travel: 3000 mm y-travel: 940 mm z-travel: 1000 mm table surface area: 3250 x 800 mm spindle taper: SK 50 spindle turning speed range: 40 - 1800 U/min feeds longditudinal/cross/vertical: 0 - 2250 mm/min rapid traverse: 6 m/min table load: 4500 kg control: HEIDENHAIN, TNC 355 total power requirement: kW weight of the machine ca.: 10,3 t dimensions of machine L x W x H: 4,50 x 2,69 x 2,71 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

have for sale qty 2x used containerised gas gensets. Engine No 1 CHP complete unit J320GS Power: 1063Kw Year: 2000 Hours: 50,000 Excellent condition Bio Gas Gas Switchable Panels control: DIA.NE BLUE Complete Overhaul done at 60,000 hours Engine No 2 CHP complete unit J320GS Power: 1063Kw Year: 2011 H Complete Overhaul done at 60,000 hours Bear: 51,000h Very good condition Bio Gas Switchable Panels control: DIA.NE X

Manufacturer: Arburg Type: 320 S 500 - 150 Year of production: 2000 Controls: Selogica Closure Type: Hydraulic Clamping force: 500 kN Bar spacing: 320 mm x 320 mm Plate Size: 498mm x 498mm Tool height: min 225 mm Opening Distance: 350mm Maximum distance between plates: 575 mm Screw: 35mm Stroke volume: 106 ccm / 89 gram PS Injection pressure: 1610 bar General Motor: 15kw Heating: 4.8 kW Dimensions: 3.7 m x 1.2 m x 1.8 m weight: 2250 kg On-screen text: German Additional equipment: Core String: x1 Euromap

faceplate diameter: 3200 mm swing diameter: 5100 mm turning height: 2505 mm cross rail - adjustment: 1500 mm max. ram stroke: 1250 mm slide adjustment: 2000 mm control: Siemens 8 T tool changer: 16 STK table load: 60 t faceplate turning speed range -stepless-: 0,8-100 U/min feed: 0,0 1-1000 mm/min rapid traverse: 6000 mm/min drive of main spindle: 75 kW weight of the machine ca.: 70 t dimensions of the machine ca.: 9,3 x 6,1 x 6,0 m machine is in an excellent condition with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0350 mm : 196 mm : 0650 mm : 170 mm : 42 mm : 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crankshaft Jenbacher 420 Nr 327583 Delivery time about 6-8 weeks

max. Spindle speed: 5000 U/min. travel -x axis: 160 mm travel -z axis: 450 mm numbers of turret head positions: 12 tool taper: VDI 30 Control: Heidenhain iT Plus Dimensions (L x W x H): 4,5 x 2,5 x 2,5 m weight of the machine: 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic Breaker Rammer 3288 E 3 times available Hydraulic Breaker Manufacturer: Rammer Type: 3288 E Year of Make: 2020 Strike hours: -Hammer 1- 935h -Hammer 2- 722h -Hammer 3- 660h Carrier class: 26.0 - 42.0 to. Weight : approx. 2400 kg Adapter plate: Verachtert CW 45 S Other: not overhauled, sold with chisel and hydraulic hoses

SPECIFICATIONS: Installed power: 2.2 kW Automatic saw blade return Automatic lubrication

cutting diameter: 320 mm saw band length: 4160 mm cutting width: 610 mm cutting lenght max.: 500 mm clamping head:: max. 620 mm saw speed: stufenlos 15-120 m/min work height max.: 760 mm dimensions of saw-band: 4160 x 34 x 1,1 mm Control: Siemens Siematic OP3 total power requirement: 2,6 kW weight of the machine ca.: 1,96 t dimensions of the machine ca.: 2,55 x 2,45 x 1,5 m CE signed: Condition: ready for operation: Video available on our website: Electric 400 Volt: Kloeckner + Siemens Cooling equipment: Well-maintained fully automatic miter band saw with Siemens Siematic OP3 control for quantity and cutting length, hydraulic frame clamp, stepless saw band speed. Machine only used in individual production with small pieces for about 3 hours per week! Cutting range 0° / 90° - round 320 mm - flat 610 x 320 mm Cutting range 75° - round 320 mm - flat 350 x 200 mm Cutting range 60° -  ...

Manufacturer: Lenze Motor mit Getriebe, Year: GST89-3 Y VBR 071, Type: CLP HC 320, Motor mit Getriebe: GT/30476065, Year :GST89-3 Y VBR 071

Pressure total: 80 - 800 ton Ram stroke: 1600 mm Free frontal opening L-R: 2850 mm Free lateral opening F-B: 1000 mm Daylight: 1900 mm Table surface area : 2800 x 2000 mm Slide area: 2800 x 2000 mm Die cushion capacity in table: 32 - 320 ton Die cushion stroke: 400 mm Die cushion pad area: 2500 x 1700 mm Approach speed: 400 mm / sec Working speed: 5 -42,7 mm / sec Return speed: 420 mm / sec Required power: 246 kW Height over floor approx.: 7785 mm Weight of machine approx.: 100 ton No. of moving bolster: 1 pcs.

Manufacturer: KBM Kantenschleifmaschine, Type: KBM 3200, Year: 2013, Control: hand, Control: hand, Roller diameter D mm: ca.120, Table stop mm: ca.900, Sanding area (beam): yes, Sanding belt width max mm: 150, Sanding belt length max mm: ca.3200, Sanding unit slewable up to 45°: yes, Schleifbandgeschwindigkeit min-max m/sec: 2 Stufig, Sanding belt dimensions mm: ca 3200 X 150, Bandantriebsmotor kW: 2,2, Oszillation mm: ca.20, Year :2013

Manufacturer: Dete Vorwärmgerät für Lack, Type: 32Ex 1 R, Year: 2000, FREETEXT2: 3,5 Kw, FREETEXT3: Ex geschütz, FREETEXT4: Regelbar Temperatur, Year :2000

Manufacturer: Homag, Type: Eingangskarte 32x24V, Model: 2us nach + schaltend PNP, Serial number: 2-083-01-5005, Year: 1995, Nur Abholung : 200, Sale without warranty: yes, Installation height: Preis ist für 1 Stück, Year :1995

STAR ECAS 32T CNC lathe was built in 2005 in Japan by STAR MICRONICS CO., LTD. The machine, designed for the precise machining of complex workpieces, is used in many industries, such as automotive and aerospace. Its extensive machining capabilities facilitate complex machining processes, such as turning, drilling and threading, both on the front and back of the workpiece. Compared to other lathes available on the market, the offered STAR ECAS-32T swiss-type lathe stands out with the use of 11 axes, two 10-position turrets and two spindles (main spindle and sub-spindle). The extremely rigid design, in turn, provides the incredible process stability which is necessary to achieve excellent precision and quality of the produced parts. All this is complemented by intelligent CNC control, in which even the most advanced work programs are created in just a few steps. The STAR MICRONICS ECAS  ...

Manufacturer: Koch, Type: SBD - 320 , Year: 1994, Control: Programm, Working widht max mm: 1500, Arbeitstiefe max mm: 320, Working thickness max mm: 10 - 32, Saw diameter mm: 350, Work piece transport: Kette, Drilling support horizontal: 2, Drill gearings: 7, Drill gearings: 7, Drill support from top: 5, Drill gearings: 7, Belt conveyor: yes, Gluing: yes, Re-charging: no, Dovel insertion: yes, Raster 32 mm: yes, Horizontal drilling from both sides: yes, Wight approx. kg: 6000, Year :1994

Manufacturer: Imotech, Type: IMO 324, Year: 1997 ca., Body presses assembly line: yes, Work piece width min-max mm: 650, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 2000, Pre-assembling conveyor: 3 m, Glazing tape: 3 m, Press: IMO 324, FREE TEXT: einschl. Puffer, Querförderer und Rückführung , Year :1997 ca.

STAR ECAS 32T CNC lathe was built in 2007 in Japan by STAR MICRONICS CO.,LTD. The machine, which combines high performance and precision, has been designed to improve the machining of even the most complex workpieces. Its extensive machining capabilities facilitate complex machining processes such as turning, drilling and threading, both on the front and back of the workpiece. This makes the STAR MICRONICS ECAS 32T CNC lathe indispensable in many industries, such as the automotive and aerospace. The STAR ECAS-32T swiss-type lathe is equipped with, among others, 11 axes, two spindles (main spindle and sub-spindle) and capacious turrets that can accommodate many tools for any type of machining. The maximally rigid design additionally ensures incredible process stability, which is essential to achieve excellent precision and quality of the produced parts. The total weight of the machine  ...

max. machining diameter: 3200 mm max. workpiecediameter: 3200 mm axial slide way: 2200 mm control: Siemens Sinumerik 840 D table diameter: 2500 mm boring diameter: 800 mm max. load: 40.000 kg table rotation speed: 2 U/min grinding head: grinding head - swivable: +45 / - 45 ° turning speed range - grinding wheel: 270 - 2700 U/min tip circle diameter: min. 1500 mm grinding spindel dia.: 100 mm Max. grinding wheel diameter: 450 mm Dressing diameter: min. 250 mm Planing width: min. 80 mm Fast feed speed: axial: 10 m/min Fast feed speed: radial: 3 m/min max. depth of profile: 100 mm tail stock: tailstock travel: 1410 mm total power requirement: 225 kVA weight of the machine ca.: 46 t dimensions of the machine ca.: 14,5 x 9,95 x 6,1 m Gear Profil-Grinding Machine - CNC Control Siemens 840D - Tailstock - Dressing Unit - Oil Mist suction - Coolant The data for this ad was created with Modul ...

Kato 4P8.1-3250 - Unused - 2625 kVa - 2100 kW

Behringer HBP 320 Depth of throat: 320 mm Sawspeed: 16 > 100 m/min Length of band saw: 4860 x 32 x 1,1 mm Power needed: 3 kW Length : 2500 mm Depth : 2400 mm Height: 1600 mm Weight: 2400 kg

Key data: 45 °, 3200 mm, 1450 mm

Saw blade tilt and height adjustment motorized and with digital display Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds 2800/3665/4800 min ̄¹ High dead weight ensures vibration-free running Large boom table with material roller Rip fence with round bar guide and digital position display Extendable aluminium longitudinal stop with two folding stops 7.5 kW main motor mounted on robust cast iron frame Four-bearing sliding carriage with double trolley made of anodised aluminium with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Large pendulum protection hood can be easily swivelled up with the help of a gas pressure spring Saw blade clamping via tool-free Rapid system Cutting width with rip fence 1450 mm Max. cut-to-length width ...

Control Mitsubishi Max. cutting length ... 3200mm Max. sheet thickness ... 10mm Drive... Hydraulic Main engine power ... 15kW Machine weight ... 11000kg L x W x H ... 4050x2050x1790mm The machine is in good condition, possible to test under power.

- completely stainless design, for dry goods filling, - driven by state-of-the-art servo motor, - electronic control , - the vacuum system is equipped with a humidity sensor, - the filling speed is infinitely variable, - can be operated by knee switch - 90 litre hopper, foldable - with removable feed and cleaning auger, - the conveyor is of paddle-wheel design, stainless steel - possibility of connection to a clipping machine for the associated equipment - equipped with standard accessories. - Loading capacity: max. 3.000 kg/hour - integrated computer for control and regulation, - 99 program positions foil stowage, full water protection, - dosing from 1 to 99.999 grams, - automatic fault indication logic, digital display - dimensions: 1156 x 963 x 1775 mm Total power: 2,6 kW Capacity: 0,55kW, 25m3/hour Voltage, freque ...

Ø grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Grinding wheel dimensions (od x id x width): 508 x 304.8 x 254 mm, Ø min / max to grinding: 1.5 / 120 mm, Ø min/max to be rectified: 1.5 / 120 mm, Regulating wheel width: 254 mm, No. of regulating wheel speeds: Infinite, Regulating wheel speed nº: Infinite, Min/max speed of regulating wheel (r.p.m.): 10/250 rpm, Min / max regulating wheel speed (r.p.m.): 10/250 r.p.m., Dimensions of the regulating wheel (OD x ID x W): 305 x 190.5 x 254 mm, Regulating wheel dimensions (od x id x width): 305 x 190.5 x 254 mm, Grinding wheel width: 254 mm, Maximum infeed grinding length: 254 mm, Maximum length to be rectified in plongeé: 254 mm, Power hydraulic motor: 0.55 Kw., Hydraulic motor power: 0.55 Kw., Total power: 27 Kw., Voltage: 220/380V, Long: 1.800 mm, Width: 2.800 mm, High: 1.900 mm, Tall: 1.900 mm, Weight: 6.420 Kg.

Key data: 1034 KW, 400 V

For Sale: 2 Units Jenbacher 320 – Containerized with Cooler and Silencer We are offering two Jenbacher 320 gas engines, fully containerized and ready for deployment. Each unit comes complete with cooling systems and silencers. General Specifications: Model: Jenbacher JMS 320 Included: Container housing Cooling system Exhaust silencers

:::TECHNICAL SPECIFICATIONS::: CNC Model: Mitsubishi Main spindle power: 7Kw Main spindle bar passage: 36mm Headstock Stroke (Z1): 165mm Main spindle speed: 4000 Fixed headstock: yes Number of linear axes: 5 Number of fixed tool slots for tool plate: 5 + 5 Number of live tool slots for tool holder: 4 X1 Axis Travel: 185mm Y1 axis travel: 490mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Number of counter-spindle speeds: 4000 Counter spindle power: 3.5Kw Bar Passage: 32mm Counter spindle X stroke : 293mm Z stroke sub-spindle : 295mm Number of motorized rear tools: 4 Refrigerant used: emulsion Model and brand bar loader: Iemca Boss 545 E Chip conveyor: belt :::D DIMENSIONS AND WEIGHT::: Length: 2420mm Width: 1500mm Height: 1935mm Weight: 3800Kg

Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich.

A versatile and robust Arsenal double-spindle universal milling machine with milling head is available. Table dimensions X/Y: 1350mm/320mm, table tilt: +/-45°, travel X/Y/Z: 1000mm/360mm/460mm, automatic travel X/Y/Z: 980mm/340mm/440mm. Horizontal spindle table distance: 30mm-490mm, vertical spindle table distance: 170mm-630mm, spindle mount: ISO50, speed: 2000rpm, feed X/Y/Z: 1000mm/min/415mm/min/415mm/min, rapid traverse X/Y/Z: 2500mm/min/1040mm/min/1040mm/min. Machine dimensions X/Y/Z: approx. 2800mm/3100mm/2000mm, weight: approx. 3500kg. On-site inspection is possible.

A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible.

A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible.

Optimum Optidrill DH 32GSV Admission in drilling-spindle (morse): Mk3 Max drill capacity: 30 mm Table dimensions: 420 x 400 mm SPEEDS: 40 > 3000 rpm Max drilling depth: 125 mm Motorpower: 2,2 kW Length: 820 mm Depth : 450 mm Height: 2230 mm Weight: 324 kg