wartsila 20 used for sale

B&A REF: 9275 TON: 200 SCREW DIAMETER: 55MM SHOT WEIGHT: 451 STROKE VOLUME: 475CM3 INJECTION PRESSURE: 1741AR PLATEN SIZES: 780 X 780MM DBTB: 530 X 530MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 500MM MOULD OPENING STROKE: 440MM MAX DAYLIGHT: 940MM EJECTOR STROKE: 130MM CONTROLS: VPC 20000E AIR VALVES: 1 HEATING CAPACITY: 12.9KW

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

B&A REF: 9259 TON: 370 SCREW DIAMETER: 70MM SHOT WEIGHT: 1060 STROKE VOLUME: 1175CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 1070 X 990MM DBTB: 710 X 630MM MIN MOULD HEIGHT: 300MM MAX MOULD HEIGHT: 750MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1460MM EJECTOR STROKE: 275MM CONTROLS: DIMI EL2 PLUS CORE PULLING: 2 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 27KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

Key data: 2000 mm, 6 mm, 10 mm

4 ROLL HYDRAULIC PLATE BENDING MACHINE MODEL M2006P _NC EASY COMMAND 15” -MATR. C072/25 MACHINE NEW PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BEND BRAND MG SRL ITALY CNC_PROGRAMMABLE AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Rolls dimensions: -Surface length mm. 2050 -Top roll  mm. 160 - Lower roll  mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, plate edges pre-bend automatic programmable • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system f ...

Key data: 2000 KW, 415 V

MWM 2020V20 Natural Gas Generator Set Fuel: Natural Gas Frequency: 50 Hz Scope of supply: Engine, Alternator, Base Frame, Control Panel, Gas Line. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Offset printing machine Type: R 202 ET Manufacturer: Man Roland Year: 2003 Impresion: 30.000.000 Machine in good condition Find more here - / Contact us at -

Work table AT 2000 with beech wood top and sliding door Work table Baker's table mobile Beech wood worktop Used device cleaned Plate sanded & re-oiled

weight max. in kg: 2.000 kg table height: max. 1.010 mm table height: min. 190 mm table surface area: 800 x 1.300 mm engine: 0,75 kW The Unicraft SHT 2000 hydraulic scissor lift table (1300058) offers a reliable solution for your lifting projects, e.g., for manually feeding a planer or saw with entire stacks of wood. With an impressive load capacity of 2000 kg and a robust construction, this lifting platform is ideal for use in industrial environments. This scissor lift table is characterized by its precision and user-friendliness, enabling you to lift heavy loads safely and efficiently. With a maximum table height of 1,010 mm, the Unicraft SHT 2000 is the ideal choice for improving your workflows and protecting the back of the machine operator. Drive: Electro-hydraulic Cable length: 3 m Safety standard: EN 1570 Condition: New with warranty The data for this ad was created with ModulMW ...

Work table AT 2000 with beech wood top and flour trolley Work table Baker's table Beech wood worktop 3 ingredient containers on the left Stainless steel flour trolley for 100 kg Used device

New stem radiator for large engines Dimensions : 180 x 900 x 2000 mm Weight : 500 Kg. With fan wheel

Puller for 200cm deep pullers NEUWagen profile 40x40mm screwedExternal dimensions: W: 213cm D: 64cm H: 180/190cmInterior dimensions: W: 203cm D: 64cmSee pictureDo we have various large pullers and pullers in stockDetails see pictures

Diosna Lifting Kneader D 200 / 2G usedThe Diosna D 200/2G is a powerful kneading machine that is designed for use in bakeries and pastry shops. Â With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of dough in large quantities. The robust construction and high-quality materials ensure a reliable and durable machine. With a lifting kneading machine such as the Diosna D 200/2G, high-quality doughs can be kneaded efficiently and evenly. DescriptionLifting kneader Diosna D

used lifting mixer Diosna D 200 / 2GBdescriptionLifting mixer Diosna D 200 / 2G with fixed kettleManufacturer: Diosna Dierks &, Söhne GmbHTyp: D 200 / 2GMit stainless steel kettle and lifting armKettle for max. 200 kg dough or for max. 125 kg flour2 speeds slow and fastMoving on castorsWith 1 timer380 Volt 7.1A 50HzThe Diosna D 200/2G is a powerful kneading machine designed for use in bakeries and confectioneries. With a boiler volume of 200 liters and a capacity of 2 speeds, the lifting kneader is suitable for the production of

Flour mills Rotormat Bio-200Manufacturer : HommelType : Bio-200GRINDING TURBINE ROTORMATTtype:BIO 200Grinding capacity approx. kg/hour fine80 - 100Grinding capacity approx. kg/hour medium120 - 150Grinding capacity approx. kg/hour coarse150 - 200Natural stone:highly wear-resistant200 mm DiameterPower:3 KW 4 PSconnected load:400 VTrichter capacity:approx. 40 kg GrainWeight:approx. 80 kgDimensions cm:100 x 60 x 135Â For details see pictures.

Spiral mixer extendable Kemper SPA 200Manufacturer : KemperType : SPA 200200 kg flour 320 kg dough2 watchesstainless steel kettle and spiral with 3 extendable kettle 1 kettle has cracksDetails see picture 

ALU Puller with Cloth for 200 cm Deep Stoves NewProduct DescriptionCondition: NewMaterial Puller: AluminumSuitable for 200 cm Deep StovesWith Side FasteningDimensions Puller: Width 58 cm, Length 240 cm, Height 5.6 cmDimensions Cloth: Width 56 cm, Total Length 470 cmDetails see pictures.

Machine / Stirring Brush REGO 40L 6 Wires Stainless Steel New✠Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 6 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

Lifting kneader Diosna D 200 Plus Description Lifting kneader Diosna D 200 Plus with fixed boiler Manufacturer: Diosna Dierks &, Söhne GmbH Type: D 200 Plus Condition: revised and repainted With stainless steel kettle Kettle for max. 200 kg dough or for max. 125 kg flour 2 speeds slow and fast With flour dust cover Mobile on casters Machine completely repainted With stainless steel control box With 1 timer NEW Many parts renewed Boiler polished 380 Volt 

Machine / Mixing Broom REGO 40L 12 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 12 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

â Product description âœ" Manufacturer: Rheon âœ" Model: Twin Divider VX 201 âœ" Year of manufacture: March 2004 âœ" Condition: used, cleaned, in working order âœ" Machine type Dough divider âœ" el. Connection: 3x 380 V / 0.93 kW / 50 Hz / 3.37 A âœ" Outside Dimensions: W.: 95 cm, D.: approx. 235 cm, H.: 170 cm The machine worked until recently in the bakery We picked it up, completely disassembled it and cleaned it After cleaning it we did not connect it should be checked first Partial belts must be replaced Details see pictures.

Rego SM 2000 Automatic Stop Machine / Stirring Machine Product description: âœ" Condition: used, tested, baker's condition âœ" Manufacturer: RMT - Rego GmbH âœ" Type: SM 2000 âœ" Year of construction: 1996 âœ" Power (kW): 1.68 âœ" Volt: 400 âœ" Amp.: 8.13 âœ" incl. 1 stainless steel kettle and 1 whisk âœ" electrically driven height-adjustable kettle Details see pictures

Machine / Impact Brush REGO 40L 15 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 40 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 15 Thick Wiresâœ" for Anchor Machines of the Manufacturer Regoâœ" Total Length: 450 mmDetails see pictures

Machine / Stirring Brush REGO 20L 6 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 6 Thick Wiresâœ" for Anchoring Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures

Machine / Mixing Broom REGO 20L 12 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 12 Thick Wiresâœ" for Sling Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures

Machine / Mixing Broom REGO 20L 15 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 20 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 15 Thick Wiresâœ" for Anchor Machines of the Manufacturer Regoâœ" Total Length: 350 mmDetails see pictures

Machine / Stirring Brush REGO 32L 6 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 32 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 6 Thick Wiresâœ" for Sling Machines of the Manufacturer Regoâœ" Total Length: 420 mmDetails see pictures

Machine / Mixing Broom REGO 32L 12 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 32 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 12 Thick Wiresâœ" for Stop Machines of the Manufacturer Regoâœ" Total Length: 420 mmDetails see pictures

Machine / Mixing Brush REGO 32L 15 Wires Stainless Steel Newâ Product Descriptionâœ" Type: REGO, 32 Lâœ" Condition: Newâœ" Material: Stainless Steelâœ" 15 thick wiresâœ" for stop machines of the manufacturer Regoâœ" Total length: 420 mmDetails see pictures

Lifting tipper Kemper HK 200 RD Manufacturer : Kemper Type : HK 200 RD Year of construction : 2011 Tipping height approx. 250cm Dimensions approx. W: 195cm D: 150cm H: 360cm for WP DK 250 Baker's condition Details see picture

Jelly spraying machine - is used - Manufacturer: Bakon - Model: Jelly 2000 M (G) - Year of construction 2004 - Exterior Dimensions W.: 48 cm, D.: 48 cm, H.: approx. 110 cm For details see pictures.

Baking gloves 2Â pair up to 200ËšC- max. 350ËšCProfessional gloves for the bakerBaking gloves made of plush handlesOperating temperature 200ËšC -max. 350ËšC (short-term)Weight 348g325x150mm, short cuffDetails see picture

Baking gloves 2Â pairs (4 pieces)Professional gloves for bakerOperating temperature 100ËšC -max. 200ËšC (short-term)Weight 300g450x150mm, with stiles made of linen fabricSpecial cotton fabric MittensDetails see picture

(2 pairs) Oven gloves Baker's gloves Heat-resistant +200 Âcf glove with cuff made of linen fabric grey, heat-resistant up to +200 Âcnot machine washable, approx. 36 cm long, 1 pair We have a larger number in stockDetails see picture

Pullers ALU for 200cm deep furnace NEWAductors made of ALUApullers for 200cm deep furnacePullers dimensions: W: 240cm D: 58cmDo we have various large pullers in stockDetails see picture 

Pullers with puller carriage for 200cm deep furnace NEWThe puller trolley stainless steel with 10 ALU pullerson rollersTrolley profile 40x40mm screwedOuter dimensions: W: 251cm D: 64cm H: 184cmInternal dimensions: W: 243cm D: 64cm10 pieces Pullers made of ALUAductors for 200cm deep furnacePuller dimensions: B: 240cm T: 58cmSee pictureDo we have various large pullers in stockDetails see picture 

Cake ring made of aluminium à ̃ x H: 200 x 60 mm NEW ( 10 pieces )Dimensions: à ̃ x H: 200 x 60 mmMaterial thickness: 2.0 mmDetails see picture

SCODIX ULTRA 202 Year 2019 Printing counter: only 230.000 copies Paper size Min: 29 x 42 cm Paper size Max: 54 x 78 cm Printing size Max: 74 x 50 cm Foil technology Digital in-line with Scodix PAS foil technology Foil roll width (min/max) 50-500 mm/1.97-19.68 in Foil roll size Diameter:max 30 cm, Length:max 2,000 m, Core:77mm/3 in Max number of simultaneous rolls Up to 4 rolls Polymer layer thickness From 5 up to 250 microns Substrate weight 135-675 gsm/6-30 points Substrate thickness Up to 700 microns Foil film type Wide variety of industry standard hot/cold foil films Substrates Offset, Plastics, laminated and coated/uncoated substrates Resolution Up to 2540 x 450 DPI Variable Data Enhancement (VDE) PDF, optimized PDF, barcode system (optional) Scodix RSP? Technology 4 CCD camera system, RSP? (Rotate, Scale, Position) algorithm, automatic positioning, ± 100 micron image to image regis ...

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

4 Ink Pumps Complete Technotrans TB 200-15/9 Ink Pump Year 2007 Capacity 200kg bins Air Pressure: 8bar

Bacher 2045 Registerpunching Rigister punching width: 425mm Max plate width: 800mm

pressure: 200 t nominal power: 2000 kN stroke length max.: 1700 mm working feed: 50 mm/sec weight of tools max.: 50000 kg voltage: 400 V table-size: 4.800 x 2.400 mm total power requirement: 99 kW weight of the machine ca.: 113 t dimensions of the machine ca.: m passage width: mm stroke: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer QUASER Model MV204IIU / 10 Year 12/2002 CNC HEIDENHAIN ITNC530 3 work tables / pallets Table 1 Size Ø280 mm. Table 2 Size Ø 500 mm. Table 3 Size 600×400 mm. Weight allowed on table 265 kg Min-max distance on table 150-760 mm. Axles Travels (X/Y/Z) 700/590/480 mm Tilting head movement range (A-axis) ±110º Axis Positioning A 0.001º Table Rotation (C-Axis) 360º C-Axis Positioning 0.001º Fast Forward Axles (X/Y/Z) 32,000 mm/min Maximum Working Advance (X/Y/Z) 15,000 mm./min. Head Head Speed 10,000 r.p.m. BT-40 Head Cone Main engine power 15/33 kW Par 192/189 Nm. Charger Tools No. of Positions in Tool Loader 32 RANDOM tool change system Maximum tool length 280 mm. Maximum tool weight 7 kg Other Equipment Chip Evacuator INCLUDED Internal cooling 20 bar INCLUDED Coolant tank capacity 280 l. Refrigeration electrical cabinet INCLUDED Clea ...

Model: KMRS-200 Year: 2016 Condition: Used Serial Number: 17508-001 Stock Number: 2969 Capacity: 700 pc/h Belt width: 325 mm Diameter cutting ring; 270 mm CIP unit hot water min. 60 degrees Celsius Compressed air:5 Bar, 3.5 Nm³/h Power: 3 x 400V, 50Hz, 2kW Dimensions: 1600 x 1150 x 1500 mm

Used Tetra Pak A3 Compact Flex Filling Line – 200 ml Slim Complete Carton Filling Solution | 9,000 pph | Aseptic Packaging This used Tetra Pak A3 Compact Flex filling line is designed for the efficient filling of 200 ml Slim carton packages. The line offers a compact and reliable solution for producers of liquid food and beverage products, including dairy, juices, and still drinks. The system consists of key Tetra Pak components ensuring smooth operation from filling to final packaging. Line Configuration - Filling Machine - Machine: Tetra Pak Filling Machine - Model: A3 Compact Flex - Year of Manufacturing: 2010 - Format: 200 ml Slim - Capacity: 9,000 packages per hour - Operating Hours: 16,444 Accumulator - Machine: Tetra Pak Accumulator - Model: ACHX 10 - Year of Manufacturing: 2010 - Operating Hours: 15,021 Straw Applicator / Distributor - Machine: Tet ...

Pressure total: 2500 ton Stroke: 1700 mm Daylight: 2200 mm Free frontal opening L-R: 5100 mm Table surface area : 5000 x 2500 mm Slide area: 5000 x 2500 mm Die cushion capacity in table: 650 ton Die cushion stroke: 0 - 200 mm Die cushion pad area: 4260 x 2150 mm Max. die size: 5000 x 2500 x 1600 mm Ejector in ram: 65 ton Ejector stroke in ram: 200 mm Approach speed: 380 mm / sec Working speed: 200 mm / sec Return speed: 300 mm / sec Die weight at the ram max.: 30 ton Die Weight total: 60 ton Oil volume: 6000 l Required power: 2 x 230 kW Height over floor approx.: 9700 mm Weight of machine approx.: 533 ton

Model: 2000/600 Condition: Used Stock Number: 3297 Belt width: 600 mm Description: Variable speed Transport length 2000 mm Power: 3 x 400V, 50Hz, 0.25kW Dimensions: 2200 x 850 x 1200 mm

A manual screen printing machine Eickmeyer is available. Material thickness range: 2mm-25mm, max. printing dimensions X/Y: 1700mm/700mm, machine dimensions X/Y/Z: approx. 2650mm/2100mm/1500mm. An on-site inspection is possible.

Used automatic line from Romaco for packaging products in PE or AL tubes. The line includes: 1. Automatic tube machine for PE or AL tubes from Romaco type U 20100. For the machine there are tooling for tubes with diameters : for plastic tubes: 16,19 shallow,19 deep, 25,30,35,50,50 shallow,50 deep for metal tubes: 13.5, 19 shallow, 19 deep, 25,30,35 2, Automatic cartoning machine from Romaco type Promatic P91 with a capacity of 90 pcs/min. The cardboard machine has a GUK leaflet folder type FA 21/4 and a date stamp for cartons. The weight of the cartoner is 2100 kg. Year of manufacture 2008. CE. Manufacturer's documentation.