128,347 used machines on RESALE, but how to find them? Machine Search
Used Used labeller STS S4/L 1.200 bph: Year: 2015 Condition: Good Used abeller STS | 2015 Adhesive: 2015 Speed: 1.200 bph Direction: linear (from sx to dx) 4 adhesive stations Labeller: Front, rear, collar e seal) Capsule spot centering Pre-centering for twine/notch Safety Protections. Code: EA 429 More details: https://bottlingscout.com
Used Used Bedo Tray Former 2008: Year: 2008 Condition: Good Used Bedo Tray Former 2008: Model VA 9095 Year: 2008 Speed: 15 cpm-900 cph Closure type: hot melt glue Technomelt of Henkel Safety protections Code: G 95 More details: https://bottlingscout.com
Used Used labeller BRB 4.200 bph: Year: 2009 Condition: Good Used labeller BRB Year: 2009 Speed: 4.200 Bph Model: MAGE ADE 633 ? CCW Direction: Counterclockwise Number of heads: 6 Number of stations: 3 adhesive Type of application: Front label Back label Collar Bottle formats: ? 61 mm ? 79 mm Safety protections Code: EA 610 More details: https://bottlingscout.com
Used Used Dryer Tunnel Omar 2018: Year: 2018 Condition: Good Used Dryer Tunnel Omar 2018: Year: 2018 Max speed: 8.000 Bph Direction: Linear Function: Dry Drying type: Air blades Safety protections Code: M 78 More details: https://bottlingscout.com
Used Used 2009 Complete Bottling Line PET KHS 72.000 bph: Year: 2009 Condition: Good Used 2009 Complete Bottling Line PET KHS: Product: Still Water Speed: 72.000 BPH on 0.5 l Year: 2009 Cap Corvaglia 29/26 Tanner Preform Hopper Triblock KHS Preform Elevator Preform Orientator Blower PET: Model: Blowmax 36S Series IV Compressor AF Chiller Riedel CIP KHS Filler: 100 valves ? mechanical Type of filling: Gravity Capper (including elevator and cap orientator) Type of workable cap: Pre-threaded plastic Cap size: Corvaglia 29/06 Distribution system: pick & place Labeller PE Model: Simple cut KS177 Direction of rotation: counterclockwise Electronic cam plates stazione roll feed Bottle inspector Presco Model: intellispec Conveyor belts KHS Shrink Wrapper KHS Model: Innopack Kisters TSP Version: film launch Palletizer Alvey 942 Type: push Pallet storage Pallet wrapper Lantech Model: S1500 Type of ...
Used Used 2019 Complete PET Line KHS 70.000 bph: Year: 2019 Condition: Good Product: Still water Speed: 70.000 BPH Year: 2019 Hopper Preform M. Tanner Preform Elevator Preform Orientator Compressor KHS InnoPET TriBlock Blower PET Labeller: Electronic cam plates 2 Stations Wrap-around roll fed Filler: 96 mechanical valves Capper (including elevator and cap orientator) Type of workable cap: pre-threaded plastic Distribution system: pick & place Bottle inspector Shrink wrapper KHS Modello: nopack Kisters TSP Versione: a lancio di film Palletizer FKI Logistek Model: A-910 Type: Push Pallet Storage Interlayer system Pallet wrapper Lantech Type of wrapping: Rotating arm Pre-stretch Code: NP 692 More details: https://bottlingscout.com
Used Used Palletizer Mas Pack 2015: Year: 2015 Condition: Good Used Palletizer Mas Pack 2015: Year: 2015 Takes empty pallet Speed: 62 layers/hour Type of product palletizing: boxes Grippers with Kuka robot Pallet warehouse Boxes format 3?2 3?4 Workable pallet size: 800 mm x 1200 mm; 1000 mm x 1200 mm Maximum workable pallet height: 2100 mm Code: R 131 More details: https://bottlingscout.com
Used Used Bottle-Washer MPF 2017: Year: 2017 Condition: Good Used Bottle-Washer MPF 2017: Year: 2017 Speed: 8.000 Bph Model: LAVATRICE Function: External washing Safety protections Code: M 62 More details: https://bottlingscout.com
Used Used Pallet Wrapper Tosa 2008: Year: 2008 Condition: Good Used Pallet Wrapper Tosa 2008: Model: 065 Year: 2008 Speed: 20 pallet/h Maximum workable pallet height: 2300 mm (including pallet) Pallet dimensions: 800 mm x 1200 mm ; 1000 mm x 1200 mm Type of winding: rotary table Pre-stretch Measurements-overall dimensions of machinery: 2500 mm x 1500 mm Safety protections Code: A 58 More details: https://bottlingscout.com
Used Used Palletizer Costral 2016: Year: 2016 Condition: Good Used Palletizer Costral 2016: Year: 2016 Speed: 6.000 bph Pallet Storage Interlayer System Safety Protections Code: R 125 More details: https://bottlingscout.com
Used Used Capper Rink 6T 2013 Stelvin: Year: 2013 Condition: Good Used Capper Rink: Model: VRA 06 Year: 2012/2013 Hourly output: 8.000 bph 6 heads Rotation direction: clockwise Cap type: aluminum screw (3x BVS e 3x MCA) Cap distribution system: pick-on-the-fly Inert gas injection system before capping Safety protection Code: X 461 More details: https://bottlingscout.com
Hydraulic cylinder with 4 guide columns, BSE 250.40/25.01.4.201.400, Merkle, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. New! - Has never been used before and is completely new, - comes from a spare parts warehouse of a certified production company, Technical information: - Double-acting hydraulic cylinder with 4 guide columns - Merkle BSE 250.40/25.01.4.201.400, - Piston diameter 40mm, piston rod diameter 25mm - Max. stroke 400mm, max. 250bar 6 months warranty We give you a 6-month warranty for these goods from the date of invoice. In the event of a defect that is not the fault of the buyer, the goods can be returned. We will only refund the buyer the price of the product paid to us. Updating in the case of digital components is excluded. Liability for direct and indirect consequential damage is also excluded. O ...
Used Used end Canning Line 2019: Year: 2019 Condition: Good Used end Canning Line 2019: Year: 2019 For cans Speed: 720 packs/hour Type: with tray Case Packer: Number of heads: 1 Pick per head: maximum 3 Head type: magnetic Carton Closer Knecht Model: d-100 Speed: 12 pack/min Operation: automatic (refilling of the carton magazin is manuel) Closure type: hot melt glue If hot melt glue: Robatech Palletizer Ecoma / Kawasaki Model: 200900-25 maximum Packing height: 180 cm Layer pad placing system No pallet wrapper General Information: Layout: o Lunghezza: 4100 mm o Larghezza: 3100 mm o Altezza: 3100 mm Safety protections Code: NP 686 More details: https://bottlingscout.com
Used Used 2001 Robino&Galandrino pvc 3.000 bph: Year: 2001 Condition: Good Model: Vulcan 3000 L Year: 2001 Direction: clockwise Suitable for PVC capsules Max speed: 3.00 bph Plate capsule magazine Machine speed adjustable with potentiometer Entry Cap presence control Safety protections Code: BC 383 More details: https://bottlingscout.com
The machine is in good technical condition, testing is possible by prior arrangement. X-axis travel distance:1,035 mm Y-axis travel:560 mm Z-axis travel:510 mm X-axis rapid traverse:30 m/min Y-axis rapid traverse:30 m/min Z-axis rapid traverse:30 m Y-axis feed length:560 mm Z-axis feed length:510 mm X-axis feed:30 m/min Y-axis feed speed:30 m/min Z-axis feed speed:30 m/min Rated (apparent) power:17 kVA Torque:83 Nm Controller manufacturer: Sie 137 mm Overall width:3,355 mm Table width:560 mm Table length:1,200 mm Table load:1,000 kg Overall weight:4,250 kg Spindle speed (min.):20 rpm Maximum spindle speed:8 000 rpm Tool operation:20 Tool length:300 mm Tool diameter:80 mm Tool weight:6,000 g Equipment:documentation / manual, chip conveyor, infinitely adjustable speed
Used Used 2019 Capsuler Nortan Prisma 8.12 Tr: Year: 2019 Condition: Good Used 2019 Capsuler Nortan Prisma 8.12 Tr: Year 2019 Direction: Clockwise Suitable for Pvc and Polylaminate capsules SUitabkle for open top capsules 8 heads for PVC 12 heads for Polylaminate Entry system control cap Long range storage Registrable cups Universal stars Speed: 15.000 bph with PVC 12.0000 bph with Polylaminate Code: BC 380 More details: https://bottlingscout.com
2 x EDM machines Charmilles Robofil 2020 BJ 1994 and Charmilles Robofil 4020 BJ 1996
Used Used Capsuler 2001 GAI 4608 DL: Year: 2001 Condition: Good Year 2001 capsule distributor by plateau Direction: Clockwise 8 heads for rolling polylaminate capsules Speed: 6.000 bph Height adjustment of electric capsule distributor Height adjustment of electric rolling carousel Head speed adjustment with potentiometer Machine speed adjustment by inverter Available bottle formats: ? 80 mm ? 105 mm Used Bottling Machinery Code: BC 377 More details: https://bottlingscout.com
We sell here a vacuum tumbler with cooling from the manufacturer Günther, type GPA 200K in a good used and functional condition. The machine was built in 2004, runs on 400 volts, 1.5 kW, completely stainless steel, rollable, container tiltable, volume 200 liters, capacity 140 kg, programmable control, workshop tested, immediately ready for use, dimensions W/D/H 175/82/160 cm, others on request.
Key data: 200 t
Capacity: 2000kN Year: 2017 Serial: 17X00095 Max Daylight: 1700mm Stroke: 1200mm Max Tooling Base Size: 2500x1500mm Max Advance Speed: 200 mm/s Electrical Supply: 415 Volts Phase: 3 Motor Rating: 50kW Continuous Approx. Net Weight: 25,000kg Max. Top Tool Weight: 10,000kg
Hydropneumatic mode of operation Profile height: 200 mm under hold-down Max. Punch Height: 150 mm Wither height: 150 mm Weight: approx. 400 kg
Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg
Key data: 1350 mm, 3 , 120 mm
Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.
General SKUR0279 MakeKonrad Reitz Ventilatoren GmbH & Co. KG LocationBarneveld CEcheck TypeKXE 200-002530-00 Pressure Pressure buildup0.2 Bar Main Features Capacity25 m3/Min Motor30 KW Pressure0.2 Bar Specified Features - Blower Blowercheck Capacity1500 M3/h Motor30 kW 400/690 Volt With sound absorbercheck Inletdia. 180mm Outletdia. 90mm Information No.290567 Year of construction2012 Floorspace2,3x1,6 M Total height4,5 M Weight1250 KgBlowersReitzBlowers > BlowersBrand > Reitz What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
- Tandem construction on 1 bed left headstock + right headstock - Mirror double tailstock left and right - Double carriage - Steady rest included - Roller rest included - Opperator panel with scales needs attension and replacement - Motorized tailstock for each side left and right - 3 bed way construction - Torq on chuck 160.000 Nm - Minimum turning diameter Ø 315 mm - Field off indurstrie: - Ship yard - Propeller shaft - Hydraulic cylinder shaft - Camshaft - Defence & Aeronautica - Rolls and Shaft for steelmills - Crankshaft
Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Un ...
- Complete machining with twin spindel, upper and lower turrets - Kitagawa 3 chuck left and right - Tool holders with driven tools axial and radial - Large jaws cabinet with inserts - OGL Gantry loader with ca 10 Kg load capacity - Chip conveyor - Paper Filtration Pressure Tank
Servopac block machine (2004), CLIENT IS EAGER TO SELL AND OFFER A SUPERPRICE. THE PLANT IS ALREADY DISMANTLED AND READY TO BE SHIPPED! Block Feeding Station (2009) Pallet Placing System (2009), Front Conveyor, Stacker, Loader Spade, Rack Conv and Side Shifter LSC-40 Car and Crawler, Kiln Door. Desacker,Unloading Conv 1, Depalleter (PushOff Turn Table at Depalleter, Pallet Scraper,Unloading Conveyor 2Pallet Turn Over, Pallet Box and Return Conv, Main Cuber Core, Skid Dispenser, Exit roller conveyor, 99 racks 9 high, 5 deep, 3 wide (135 pallets per rack) 4,800 steel pallets 18 1/2 x 26 inchesAllan Bradley SLC500 PLC controlsRelated hydraulic units Amexpo Consult, Merkurvej 31 , 9370 Hals Denmark Mobile phone +45 29251017.
ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm
Banding / Banding Machine ATS Tanner Type US 2000 LB With ultrasonic tape welding, suitable for plastic and paper tape with a width of 30 mm. Powerful, proven and universally applicable (see video below). Versatile, infinitely adjustable via two potention meters/rotary controls in terms of belt tension and belt length. Tape can be added later via pressure switches if necessary. Counter currently shows around 740,000 work cycles. Offer price 3000,- EUR EXW or 3,500 EUR incl. packaging & shipping with transport insurance.
This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine.
- 5 Axis Simuteneous EIA/ISO - Milling spindel with Threading Function - Extra M-Code (1 pair for 2-M-Code) - Preparation RMP-60 - Sub spindel with C Axis any C1 + C2 Synchronisation - IKZ with 70 Bar main spindel - IKZ with 15 Bar on lower Revolver - Knoll Filtration KF-400/2300 - SMW KNCS-N-325-104 3 chuck
used
Main Machine - ZERMA ZPS 2000 - Type: single shaft shredder (Einwellenshredder) - Drive power: 2 x 55 kW - Frequency converter: included (1 unit) Conveying Equipment Included - Discharge Belt Conveyor - Type: WF 4000 x 2500 x 580 - Drive: 1.5 kW - Inclined Belt Conveyor (mounted at shredder) - Belt width: 980 mm - Centre distance: 5000 mm - Belt type: PVC with cleats - Safety features: emergency stop rope and safety stop - Drive (right-hand): 1.5 kW Spiral Conveyor - Type: HS 450 NW 560 - Manufacturer: BULCOTECH - Drives: 0.75 kW / 11 kW / 5.5 kW / 11 kW Magnetic Separation - Drum Magnet (1 unit) - Overhead belt magnet: DM01.60 - Design: ferrite - Drive: 1.5 kW - For belt width: 600 mm Find more here - / Contact us at -
Press force: 250kN, ram stroke: 8mm-80mm, stroke rate: 180/min, installation height: 310mm, table dimensions X/Y: 550mm/400mm, ram dimensions X/Y: 355mm/220mm, machine dimensions X/Y/Z: approx. 1100mm/1400mm/2300mm, weight: approx. 2500kg. An on-site inspection is possible.
Hydraulic pump: BNK 250, Pump delivery volume: 173l/min, Motor: AC motors FCMP 200L-4/H, Motor power: 30kW, Speed: 1470rpm, Machine dimensions: approx. 2000mm/2000mm/2000mm, Weight: approx. 2000kg. Documentation available. On-site inspection is possible.
A Ferrarini & Benelli corona pre-treatment system for surface activation of non-conductive materials in continuous production processes is available. Generator type: C15/4N, output frequency: 15kHz, electrode design: multi-cylinder roller electrodes, max. treatment width: 200mm. An on-site inspection is possible.
cutting length: 2000 mm sheet thickness - max.: 6 mm operating pressure: 250 bar fabric-no.: S2669 weight of the machine ca.: 4,7 t working width: 2059 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Ref. no.: 18588 Hersteller: BATTENFELD Year of construction: 2007 Clamping unit Clamping force: 30 ton Distance between tie bars: 300 x 300 mm Mould height min.: 150 mm Mould height max.: 330 mm Opening width: 580 mm Platen size (h x v): 450 x 450 mm Injection unit Screw diameter: 18 mm Injection volume: 19 cm³ Shot weight: 17,5 g Injection pressure: 2500 bar Measurements and weight Dimensions: 3,5 x 1,1 x 1,9 m Machine weight: 2700 kg
turning diameter: 380 mm turning length: 580 mm swing dia.: 695 mm X-Axis movement: 234 mm Y-Axis movement: 100 mm Z-Axis movement: 575 mm Minimum indexing C-Axis main Spindle: 0,0001 ° Number of tools on turret: 12 Number of driven tools: 12 x Spindle speed driven tools: 4500 1/min Spindle motor driven tools: 5,5 / 3,7 kW Tool type: Mazak VDI control: MATRIX NEXUS II Main Spindle:: Spindle Speed: 5000 1/min spindle motor: 26 / 22 kW spindle bore diameter: 76 mm 2nd Spindle:: spindle turning speed range: 6000 U/min spindle motor: 11 / 7,5 kW spindle bore: 80 mm total power requirement: 43 kVA Weight: 5,5 t dimensions of the machine ca.: 2,8 x 2,1 x 1,9 m - Mazatrol Nexus II CNC control - Main and counter spindle - 12-station tool turret with driven tools and Y-axis - 3-jaw chuck -- Main: 8 -- Counter: 6 - Automatic presetting (Tool Eye). - Automatic workpiece catcher. - Side belt chip ...
12 CNC-assen: Y1 / Y2 / Y3 / Y4 / V / X1 / X2 / X3 / X4 / R1 / R2 / R3 / R4 / X5 / X6 / Tandem kantbank: 2 x 2000 ton GWF Als je een werkstuk van 16 meter lang buigt, is de maximale keeldiepte 1250 mm. Buigvoorbeeld: 35 mm (normaal staal) over een lengte van 16 meter Capacity: 4000 ton x 16 200 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 4600 mm (2x) Max stroke: 1000 mm Max distance between table -- ram: 1650 mm Depth of throat: 1250 mm Table width: 650 mm Locking speed: 70 mm/sec Working speed: 4 > 7,5 mm/sec Returning speed: 75 mm/sec Electric motor (power): 75 kW (2x) Power needed: 380V Length: 7100 mm Depth: 5000 mm Height: 6350 mm (above floor) Weight: 500 ton (2x 250 ton) Capacity: 4000 ton Bending length: 16200 mm
pressure: 4000 kN table length: 2500 mm table width: 2000 mm dayligth: 2500 mm stroke: 2600 mm tank capacity: 1000 l total power requirement: 56 kVA weight of the machine ca.: 85 t dimensions of the machine ca.: 9,2 x 3,1 x 8,2 m integrated wax-injection unit with 0-5 bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Brembana Helixchanger Heat Exchanger Notified body AIB VINCOTTE Pressure 4/10 bar Capacity 6600/3800L Hydr.press 7,5/14,3 bar
x-travel: 11500 mm y-travel: 4500 mm w-axis: 1600 mm z-axis: 2000 mm spindle diameter: 200 mm Rotary table: E25OB23941 2.000x 2.000 mm bed length turntable: 4600 mm tool taper: SK50 : 80 t Plate field size: 10.000 x 15.000 mm tool taper: SK 50 total power requirement: 83 kW weight of the machine ca.: t incl. 15 plates The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
VALOREL Stainless Steel Vessel 620 Ltr. with propeller stirrer, allowed pressure 2,5/-1bar, max. temp 150C , on top there is a inlet 50mm for clamp connection, down outlet valve diameter 2"
A two stage tea and spice mixer Gebrüder Kerner with renewed control circuitry and wiring is available. Volume: 2000l, Material: steel, Drive power: 3.1kW, Control: Siemens. Without stand and feet. An on site inspection is possible.
Conrad Boxer 200 drilling rig , Pull-up 4000 daN / kg, Pull-down 2000 daN / kg, Winch//Witch 1450 daN / kg, Year of manufacture 2007, Weight 12,500 kg, Stroke 430 cm, This Conrad Boxer is equipped with:, Caterpillar track , - Caterpillar length center to center : 2600 mm., - Caterpillar width : 400 mm., Brevini EGO200LS winch with 50 meters / Ø10 mm., Soundings winch 200 meters stainless steel wire, Ø 2mm., , Hydraulically driven 4 drill head , , - Max. Drive torque 380 - 400 daNm, - Breakaway torque 475 - 500 daNm, - Max. Speed 80 rpm, , Hydraulically operated changeover clock, suitable for 3 1/2 drill pipes., Spool head suspension with weight compensation, Hydraulically operated catch clamp, Hydraulic tank 480 liters, Hydraulically driven spray pump, Drill pipe manipulator, Drill pipe storage rack incl. 74 pcs. 3-meter 3-1/2-inch drill pipes (222 mete ...
B&A REF: 9223 TON: 70 SCREW DIAMETER: 32MM SHOT WEIGHT: 109 STROKE VOLUME: 120CM3 INJECTION PRESSURE: 1700AR PLATEN SIZES: 530 X 495MM DBTB: 360 X 315MM MIN MOULD HEIGHT: 120MM MAX MOULD HEIGHT: 400MM MOULD OPENING STROKE: 310MM MAX DAYLIGHT: 120MM EJECTOR STROKE: 100MM CONTROLS: DIMI EL 2000 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 11 HEATING CAPACITY: 6KW ROBOT INTERFACE: EUROMAP 12 SCREW DRIVE: HYDRAULIC
maximum number of results exceeded
please refine your search
