wartsila 20 used for sale

table length: 2200 mm table width: 1500 mm stroke height: 1850 mm weight max. in kg: 2000 kg : 260 mm total power requirement: 1,5 kW stroke speed - idle stroke upwards: 40 sek. stroke speed - idle stroke downwards: 30 sek. connected load frequency: 400 V weight of the machine ca.: 0,45 t dimensions of the machine ca.: 2,2 x 1,5 x 0,26 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lifting capacity: 2000 Kg Magnetic field: 350 x 150 mm weight: 70 Kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 18000 kg Loading weight per level: 3000 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 15000 kg Loading weight per level: 3000 kg Number of load levels: 5 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 30000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 5 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 21000 kg Loading weight per level: 3000 kg Number of load levels: 7 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 42000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 7 Stk. Recommended material length: 6000 mm Column width: 3000 mm Shelf height: 2440 mm dimensions: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

capacity 90 degrees: round: 680 mm capacity 90 degrees: square: 640 mm : 1250x600 mm capacity 45 degrees: round: 680 mm capacity 45 degrees: square: 600 mm capacity 45 degrees: flat: 870x600 mm capacity 60 degrees: round: 580/550 mm capacity 60 degrees: square: 530/450 mm capacity 60 degrees: flat: 550x450 mm saw band length: 8140 x 54 x 1,6 mm band speed: 15 - 90 m/min table height: 855 mm total power requirement: 7,5 kW weight of the machine ca.: 5,3 t dimensions of the machine ca.: 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new B&S positioning system”. reached. An intelligent N ...

welding current: 10 - 200 A connected load frequency: 230 V weight: 16 kg Dimensions (LxWxH): 600 x 300 x 400 mm TIG welding machine, delivery includes - Earth clamp 300 A with 1.5 meter welding cable - Italian-style electrode holder 200 A with 2 meter welding cable - Carrying strap The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 6600 kg Loading weight per level: 1100 kg Number of load levels: 6 Stk. Recommended material length: 6000 mm Column width: 2 x 2000 mm Shelf height: 2440 mm Compartment width: 800mm mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Load Weight Shelf: 36000 kg Loading weight per level: 3000 kg Number of load levels: 2 x 6 Stk. Recommended material length: 6000 mm Column width: 2000 mm Shelf height: 2440 mm Compartment width: 500 mm dimensions: 4,8 x 2,55 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

clamping range of chuck: 10 - 200 mm height: 67,5 mm daylight: 65 mm external diameter: Futter 200 mm external diameter: Spannhebel 360 mm weight: 4 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. dia. of grinding wheel: 200 mm grinding wheel width: 32 mm taper diameter: 30 mm connected load frequency: 230 V engine output: 0,9 KW weight: 28 kg dimensions: 0,56 x 0,32 x 0,30 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

welding current: max. 200 A open-circuit voltage: 14 - 24 V connected load frequency: 230 V weight: 25 kg Dimensions (LxWxH): 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2000 mm plate thickness: 8 mm pre-bending: total power requirement: 7,5 kW weight of the machine ca.: 3,6 t dimensions of the machine ca.: 3600x1250x1350 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding wheel diameter: 250 mm connected load frequency: 230 V turning speeds: 90 U/min total power requirement: 0,2 kW weight of the machine ca.: 18 Kg dimensions: 470 x 300 x 440 m Knife sharpening machine Grinding wheel 250 x 50 x 12mm, grit 220 Leather disc 200 x 30 x 12mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatic tooth flank grinding on both sides of carbide-tipped circular saw blades. Accesories: full fairing coolant system Automatic central lubrication. Measuring system for measuring saw blades. Control panel with LCD color display. DNC service. Alphanumeric keyboard. Grinding speed and grinding path depending on the tooth surface, can be adjusted as required. 2 grinding wheel mounts Coolant level monitoring Automatic grinding wheel compensation Prepared for robot operation with automatic loading door oil pan 2 x saw blade magnet holder >Ø 320mm, >Ø 180 mm 1 centering ring., Circular saw blade diameter: 200 - 840mm, Circular Saw Bore Diameter: from 16 mm, Tooth pitch: 6 - 180mm, grinding path: up to 25 mm, tangential relief angle: 0 to 10 degrees, max. grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding spindle variable: 1600 - 5500 rpm,, Conn ...

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

A CadCam CO2 laser cutting machine for the textile, wood, paper and plastics industries is available. Working dimensions X/Y: 2000mm/3000mm, max. axis speed: 1m/s, acceleration: 2G. Including various accessories. Documentation available. On-site inspection is possible.

Usable working area: 2000x3000mm, z-axis: 50mm, repeatability on the entire surface: ±0.05mm, X/Y/Z-addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y-system with linear motors, Z-axis with servo motor. Laser protection class: Class 1, with cover, base body: stable, welded steel frame structure, axis system: X/ Y/ Z movement axes, drive: linear motor drive, contactless and low-wear, removal system: 2000mm extension, conveyor: Aluminum slats with servo motor drive, Pressure roller: for material, Laser source: CO2 laser 300W, closed and maintenance-free, Cooling: Closed cooling circuit with water recooler for laser, Cutting head: 5 inch, lens, cutting nozzle, cutting gas supply, Extraction: Extraction tray for small parts and dust, Software: CAM control software ICARO. Motorized brush width: 2000mm, SEI PC console: without com ...

Internal chamber dimensions: 850x720x200mm, cycle output: 2-3 cycles/minute, depending on product size and vacuum, length of sealing bar: 830mm, connected load: 5.5kW, control: WEBOMATIC System 4000, length: 1865mm, width: 870mm, height: 1200mm. The machine was recently inspected and serviced. On-site inspection is possible.

A Bosch steam boiler with Weishaupt oil burner is available. 1) Bosch ECO 1, year of manufacture: 2021, volume: 51l, max. permissible pressure: 31bar, test pressure: 51bar, max. temperature: 238°C, heat output: 87kW. 2) Bosch UL-S 2000, year of manufacture: 2021, volume: 3315l, max. permissible pressure: 13bar, test pressure: 24.7bar, max. temperature: 195°C, steam output: 2000kg/h. 3) Weishaupt WM-L20, year of manufacture: 2021, oil output min./max.: 275kW/2000kW, heating oil pressure: 30bar. Including Siemens Simatic HMI control, water treatment, economizer and attachments. Documentation available.

Capacity: 200l, pouring height: 600mm, boiler diameter: 694mm, boiling time: 33min, connected load: 37kW, fuse protection: 3x 63A, protection class: IPX5, length: 1300mm, width: 850mm, height: 920mm, weight: 235kg. Electrically tiltable, heating type: electric, cover: double-walled. On-site inspection is possible.

grinding wheel diameter: - mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: 0,16 t dimensions of the machine ca.: 1,20,81,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Containex shower container including water boiler Austria Email is available. 1) Container Containex 20ft S, year of construction: 1994, length: 20 feet (approx. 6096mm), equipment: shower cubicles, washbasin, urinal, window. 2) Water boiler Austria Email (Havel Therm) VS-300-EU, volume: 300l, operating pressure: 10bar, test pressure: 15bar, max. operating temperature: 95°C, max. heat output: 150kW, heating time 6kW/4kW/3kW: 4h/6h/8h. Suitable for drinking water. Documentation available. On-site inspection is possible.

A Bosch low-pressure steam boiler is available. Total volume: 2480l, max. permissible pressure: 0.5bar, test pressure: 2bar, max. permissible temperature: 110°C, steam output: 1400kg/h, insulation thickness: 100mm. Machine dimensions X/Y/Z: approx. 2850mm/3800mm/3350mm, weight: approx. 3350kg. Documentation available. On-site inspection is possible.

surface area: 430 x 710 mm no. of flutes: 5 groove width: ? mm table length: 710 mm table width: 430 mm table load: 200 kg weight of the machine ca.: 250 kg dimensions of the machine ca.: 800600700 m No. 5304 Universal table DECKEL 2038 - 500 / FP 3 + 4 Rotation range 360 Tilting range from/to machine 45/15° Swivelling range right/left +/- 45 Transport dimensions approx. 800 x 600 x 700 mm Weight approx. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Three Remeza compressors and a Haro feed pump are available. 1) Remeza Remcomp SB4/C-100, year of manufacture: 2011, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 2) Remeza Remcomp SB4/C-200, year of manufacture: 2012, type: piston compressor, tank volume: 100l, output: 420l/min, max. operating pressure: 10bar, output: 2.2kW. 3) Remeza BK7, year of manufacture: 2008, type: screw compressor, output: 700l/min, max. operating pressure: 10bar, power: 5.5kW. 4) Haro GF feed pump, year of manufacture: 2020.

Schunk Universal Gripper PGNplus P 200/1-AS (318618) Size: 200, pneumatic with gripping force retention: AS • Hub per jaw: 25 mm • Clamping force: 5050 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 25.0 Clamping force [N] 5050.0 Clamping force (at finger length 0 mm) [N] 5200.0 Min. spring force [N] 1250.0 Net mass [kg] 6.8 Recommended workpiece weight [kg] 19.0 Cylinder volume per double stroke [cm³] 810.0 Min. operating pressure [bar] 4.0 max. operating pressure [bar] 6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.24 Opening time [s] 0.55 Closing/opening time with spring [s] 0.4 max. permissible finger length [mm] 265.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature [°C] 90.0  ...

Two unused Allweiler and KSB pumps are available. 1) Thermal oil centrifugal pump Allweiler NIT 50-200U5 AW4, year of manufacture: 2023, flow rate: 40m³/h, delivery head: 54m, power: 7.4kW, speed: 2900rpm, pumped medium density: 0.75kg/dm³, viscosity: 1mm²/s, pipe diameter: 203mm. 2) Reconditioned cooling water pump KSB Etabloc, year of construction: 2021, flow rate: 26m³/h, delivery head: 15.5m, viscosity: 1mm²/s, speed: 2915rpm, MEI: 0.7, pipe diameter: 116mm. The KSB pump was overhauled in 2023. Documentation available. On-site inspection is possible.

Schunk Universal Gripper PGNplus 200/2 AS (371455) Size: 200, pneumatic, with gripping force retention: AS • Stroke per jaw: 14 mm • Clamping force: 6250 N • Max. ambient temperature: 90 °C Stroke per jaw [mm] 14.0 Clamping force [N] 6250.0 Clamping force (at finger length 0 mm) [N] 7072.0 Min. spring force [N] 1600.0 Net mass [kg] 7.5 Recommended workpiece weight [kg] 23.5 Cylinder volume per double stroke [cm³] 495.0 Min. operating pressure [bar] 4.0 Max. Operating Pressure [bar]6.5 Nominal operating pressure [bar] 6.0 Min. sealing air pressure [bar] 0.5 Max. sealing air pressure [bar] 1.0 Closing time [s] 0.3 Opening hours [s]    0.6 Closing/opening time with spring [s] 0.5 Max. permissible finger length [mm] 200.0 Max. permissible mass per finger [kg] 6.5 Protection class IP 40 Min. ambient temperature [°C] 5.0 Max. ambient temperature ...

An Aristo plotter equipped for solid and corrugated board with Multihead OT.T.M.P. II-2 is available. Working width: 2000mm, working length: 3200mm, static repeat accuracy: +/-0.08mm, max. speed: 2.3m/s, max. acceleration: 2G, max. material passage height: 55mm, vacuum pump power: 5.5kW. Machine dimensions X/Y/Z: approx. 2700mm/4250mm/1100mm. Documentation available. On-site inspection is possible.

grinding wheel diameter: ? mm power requirement: 1 kW total power requirement: 1 kW weight of the machine ca.: ? t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

2 m

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 660 - 815 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 400 mm Wheel width: 400 mm roll diameter: 60 mm number of rolls: 8 Stck. work height max.: 810 - 910 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1200 kg workpiece diameter: 20 - 800 mm total power requirement: 0,75 kW traversing speed: 80 - 1600 mm/min weight of the machine ca.: 56 kg range L-W-H: 520 x 470 x 390 mm - For machining cylindrical workpieces - Flat frame - Castors with polyurethane coating - Clear controls - Infinitely variable speed - The control electronics are of a robust and closed housing protected - With foot switch for start/stop - Drive with DC electric motors and gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 200 t stroke: 400 mm table surface area: Arbeitsbreite 1300 mm pressure: 243 bar oil volume: 64 dm³ ajustment speed: 5,73 mm/sec work speed: 1,84 mm/sec return speed: 7,08 mm/sec total power requirement: 3,0 kW weight of the machine ca.: 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 2000 mm Working width: 600 mm Wheel width: 600 mm roll diameter: 90 mm number of rolls: 8 Stck. work height max.: 800 - 950 mm Colour: blau / rot weight: 150 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 550 mm z-travel: 560 mm weight of the machine ca.: 10 t dimensions of the machine ca.: 5.5 x 3.2 x 3.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double Z mixer with discharge screw Type : UK 2000 AEL Manufacturer : Werner & Pfleiderer Volume : 2000 ltr. Material : Areas in contact with the product in stainless steel

Stainless steel tanks Manufacturer: SAV Type 20062 Capacity 2260 litres Year of construction 2000 Operating temperature product room 95 °C Double jacket for heating and cooling, pressure-resistant up to 8 bar Material V4A

max. dia. of grinding wheel: 200 mm grinding wheel width: 32 mm grinding wheel hole diameter: 51 mm turning speed range: 2900 U/min total power requirement: 0,9 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inverter heat pump. Very good condition. Was used for heating. Closed circuit. Glycol. Serviced. Power approx. 53 kW

Grinding length 500 mm Grinding width 230 mm Table size 760 x 200 mm Automatic delivery Magnetic disk Filter system