wartsila 20 used for sale

Micrometer screws, micrometer screws, outside micrometers, outside micrometers -Manufacturer: Steinmeyer, micrometer -Measuring range: 175-200 mm -Reading: 0.01 mm -locking device -other sizes: also available -Case dimensions: 375/205/H35 mm -Weight: 1.3 kg

Key data: 2500 KW, 400 V

Engine; MTU204000L64 Year of Construction 2024 Operation hours; 0 (New) Electric power; max 2500kWe Construction form; 20 cylinders in V configuration Voltage; 400V Apparent power; 2.711kVa Speed; 1.500 RPM Frequency; 50Hz Model; Containerized Can be fully equipped with heat coupling & CHP MTU, GAS GENERATOR, CONTAINERIZED, CHP ROLLS ROYCE

Key data: 65 mm, 510 mm

12-8 position driven turrets - Y axis +/- 40 mm - with Lns Quick Load short barfeed - well tooled - fanuc 18i-TA Control

Müro A3/2000 WT block size press; good condition; cleaned and tested; 2 hot air dryers; Working width 525mm; Insertion height 200mm. Padding press Müro A3/2000 WT; good condition; cleaned and checked; two dryers; working width 525mm; working hight 200mm.

- Strapping machine - Standard version

Key data: 490 mm, 1250 , 990

Machine type: EVP-RA 200 Manufacturer: ERBA Power kW: 1.5 Total volume: 230 lt. The EVP-RA 200 vibratory finishing machine from ERBA has a rising work container base with separation. It has an easily replaceable screening unit and an electrical control cabinet. A fully automatic PLC process control is optionally possible. The machine is characterized by high work efficiency by means of an integrated drop stage. Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter. The EVP-RA 200 can be linked to other machines due to its lateral discharge. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories ...

pressure: 200 t throat: 450 mm stroke: 30 - 140 mm table surface area: 1100 x 850 mm dayligth: 500 mm ram surface: 800 x 600 mm ram adjustment: 110 mm tool hole in ram: Durchm. 65 x Tiefe 105 mm no. of strokes: 45 Hub/min total power requirement: 15 kW weight of the machine ca.: 14,2 t dimensions of machine L x W x H: 3,18 x 2,09 x 3,05 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

machine vice, stable vice, drill press vice, drilling vice -Manufacturer: Fortis, machine vice type Q94160 -Clamping jaws: 160 x 40 mm -Clamping depth: 205 mm -Dimensions: 405/160/H115 mm -Weight: 28.5 kg

Gluing unit, gluing part, gluing head, heating tank for edge banding, edge banding machine, melting unit with granulate container for edge processing machine -Manufacturer: Paul OTT, aggregate carrier from edge banding machine U 206 -Individual components: see photos -Dimensions: 780/400/H230 mm -Weight: 27 kg/piece

roller chain, drive chain, single roller chain -Manufacturer: Witra, drive chain single roller chain type 20B -Length: 3200 mm -Pitch: 31.75 mm 1 1/4 / Width 43.2 mm -Rollers: Ø 19.05 mm -Quantity: 36x roller chain available -Price: per chain -Package dimensions: Ø 330 x 180 mm -Weight: 11.9 kg/piece

Key data: 415 mm, 1290 , 980

Machine type: EVK 200 Manufacturer: ERBA Heating element kW: 1.5 Total volume: 200 lt. Description: With the ERBA Granulate Dryer EVK 200, workpieces can be easily separated from the granulate with the integrated screening device. It has excellent drying ability, a direct heating system and digital temperature control. The working tank is completely sprayed with polyurethane on the inside. The EVK 200 can be linked to other machines. The price quoted is net plus the currently valid statutory sales tax and plus freight costs. The pictures can show the system including accessories, which are optionally available and associated with additional costs. The price quoted refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online ...

V-belt pulley, belt pulley -V-belt pulley: 5-groove pulley SPB-200-5 -V-belt width: 17 mm -Holder: Ø60 x 50 mm taper clamping bush 3020 (Ø can be changed) -Dimensions: Ø200 x 100 mm -Weight: 12.1 kg

USED TETRA PAK A1 TFA 500ML FINO FILLING MACHINE FOR SALE YEAR 2018 Item #: Usm-200 Category Tetra Pak A1 A1-1000 TFA 500ml Filling Machines, Year: 2018, Working Hours only 3422, Speed 9800 Packs Per Hour, Step 1000. The filling machine still on production.

Key data: 20000 kN, 135 mm

Dosing 1: Plasticizing 1: Screw diameter mm 135 Screw diameter mm 120 | 135 | 150 Dosing Stroke Screw stroke mm 610 Maximum injection capacity cm3 6899 | 8731 | 10780 Screw speed min-1 125 Worm torque Screw torque Nm 14000 Maximum screw speed reduced torque min-1 135 Reduced torque maximum screw speed Nm 12963 Reduced screw speed maximum screw torque min-1 112 Maximum screw torque reduced screw speed Nm 15630 Plasticizing performance (3-zone) 1.2 Recovery rate (3-zone screw) 1.2 g/s 165 | 222.9 | 231,3 Plasticizing performance (barrier) 3 Recovery rate (barrier screw) 3 g/s 208.3 | 279.2 | 264,6 1) Values for polystyrene up to injection unit 2550 according to ETR 10100 1) Data for GPPS up to injection unit 2550 acc. ETR 10100 2) Values for HDPE from injection unit 3550 according to ETR 10100 2) Data for HDPE from injection unit 3550 onward acc. ETR 10100 3) Values for HDP ...

servo motor, electric motor, DC motor, stepper motor, stepping motor, compact asynchronous motor -Manufacturer: phytron, stepper motor type ZSS 52-200-2.5 25:1 -Manufacturer gearbox: Gysin type GPL 052-2S/25-1 i 1/7 -Dimensions: Ø 82 x 185 mm -Total weight: 2.9 kg

clamping angle, clamping aid -Clamping angle: for workpiece clamping -Wall thickness: 25 mm -Groove: 55 x 15 mm -Dimensions: 200/150/H150 mm -Weight: 9.9 kg

marking prism, test prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block -Marking prism: for marking plate, clamping plate, straightening bench ... -Dimensions: 200/90/H170 mm -Weight: 8,8 kg

USED TETRA PAK TBA 19 200ML SLIM 20V COMPLETE FILLING LINE FOR SALE YEAR 2006 Item #: Usm-202 Category Tetra Pak TBA 19 TBA 19 200ML SLIM COMPLETE FILLING LINE Filling machine TBA/19 TBA 200 Slim, Version 20V, Year 2006, Working hours 29000 Straw Applicator Tetra Straw Applicator 21 Cardboard packer TCBP 70 Automatic palletisation unit Conveyors & Paper trolly

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 500 mm -Type: S1-32/20x500 -Piston rod: Ø 20 mm -Mounting: bolt circle Ø 85 x 8 mm -Dimensions: 710/83/H103 mm -Weight: 5.5 kg

USED TETRA PAK TPA 19 200ML PRISMA COMPLETE FILLING LINE FOR SALE YEAR 2002 Item #: Usm-203 Category Tetra Pak TBA 19 USED TETRA PAK TPA 19 200ML PRISMA FILLING LINE FOR SALE TPA 19 200ml Prisma Square, Version 10V, Working hours 23000 Straw Applicator Tetra Straw Applicator 21 Cardboardpacker TCBP 70 Automatic palletisation unit Conveyors & Paper Trolly Condition: Still on production.

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 35 mm -Holes: Ø 15 mm / Distance: retracted 520 mm -Dimensions: Ø 74 x 560 mm -Weight: 6.2 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Hydraulic cylinder: double-acting stroke 200 mm -Piston rod: Ø 16 mm / M12 -Holes: Ø 14 mm -Dimensions: 450/105/H100 mm -Weight: 3.8 kg

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, swivel cylinders -Manufacturer: Orsta, double-acting hydraulic cylinder stroke 200 mm -Type:B2-50/22x200 Pb10 TGL 10906 -Piston rod: Ø 22 mm / M18 -Holes: Ø 30 mm -Dimensions: 465/75/H90 mm -Weight: 6.6 kg

USED TETRA PAK TBA 19 200ML SLIM 20v FILLING LINE FOR SALE Item #: Usm-209 Category Tetra Pak TBA 19 1-Used Tetra Pak TBA 19 200ML Slim 20v Filling Machine, Year of manufacturing 2004, speed 7500 packs per hour 2-Straw applicator tsa 21, 3-Conveyors and Paper trolly

Lump crusher BÜHLER MBP 2015 in good condition 4 kw with 119 rpm Belt drive ø235 : 460, n= 61 rpm, cleaned, tested, test run carried out in our specialist workshop mounted on steel frame

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 205 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.8 kg/piece

Mazak VTC 200 B moving column machining center ::TECHNICAL SPECIFICATIONS::: CNC Model: Mazatrol - CNC Version: Fusion 640M - Tool Mount: ISO 40 - Spindle Power: 18.5Kw Number of spindle speeds: 12000 - Number of tools: 24 - X-axis travel: 1120mm - Y-axis travel: 510mm - Z-axis travel: 510mm Table dimensions: 1460 x 510mm Guides: roller CNC divider: yes Rotation: Continuous High refrigerant pressure: yes Chip conveyor: belt Presetting: yes :::D DIMENSIONS AND WEIGHT::: Length: 3312mm Width: 2850mm Height: 2651mm Weight: 6100Kg

Used BT ANT / Stacker Trucks Overall good condition Year 2017 Battery about 70% Manufacturer: BT / Toyota Type SPE200D Type of electric stacker truck Drive type: Electric Load capacity 2,000 kg PYLON DATA Mast Type Duplex with Free Lift Lifting height 2,500 mm Overall height 1,785 mm Free stroke 1,350 mm Fork length 1,200 mm

Key data: 400 mm, 1000 mm

Pinacho Mustang 200 - CNC lathe - Fagor 8055 CNC control - Operating modes: manual/cycle-controlled - 8-cavity tool turret - Year of construction 2001 Specifications Capacity: - Center height: 200 mm - Center width: 1000 mm - Permissible Ø over guide bed: 400 mm - Permissible Ø over longitudinal slide: 370 mm - Permissible Ø over cross slide: 210 mm - Bed width: 300 mm Headstock: - Bore main spindle: 65 mm - Main spindle nose: Camlock-n°6 / DIN 55027-n°6 - Morse taper of the main spindle: MK5 - Spindle speeds: 2 - Constant cutting speed: 0-750 / 750-3000 rpm Feeds: - Working thrust Z/X: 0 - 7000 mm/min - Rapid traverses Z/X: 10 m/min Tailstock: - Tailstock Ø: 58 mm - Tailstock shaft travel: 155 mm - Morse taper tailstock: 4 Engines: - Power main motor: 7.5 kW - Power DC motor Z-axis: 6.8 Nm - Power DC motor X-axis: 3.4 Nm - Motor pump power: 0.57 ...

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 200 mm -Type: unfortunately without type designation -Piston rod: Ø 32 mm -Hole: Ø 20 mm / Distance: retracted 335 mm -Dimensions: 390/50/H55 mm -Weight: 3.9 kg

Key data: 1200 KW, 1875 kVA, 400 V

MWM TCG 2020 V12 1200kw 1875KVA Marelli generator Type MJB500 SD4 B24 year 2008 50hz 1500 rpm natural gas / aardgas TEM evolution control panel Scope: Genset, Pomp, gasline, control panel generalpowerholland.nl +31681163153

carrying capacity: 500 kg weight: 930 kg dimensions: 1250 x 2590 x 1500 mm Operating instructions available technical data see attached PDF The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate -Manufacturer: Elsterwerda, magnetic clamping plate type ED 215 -Clamping surface: 200 x 150 mm -Connection: 220 Volt DC -Dimensions: 370/150/H80 mm -Weight: 14.3 kg

Sprocket, sprockets, single sprocket for roller chain, drive chain, duplex sprocket -Duplex sprocket: 1 inch 12 teeth -Type: 20B-2 1 1/4 x 3/4 -Shaft mount: inner Ø 50 mm -Dimensions: see photos -Total dimensions: Ø 138 x 80 mm -Weight: 3.8 kg.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

4 Pieces Leveling Elements - Machine Stand AirLoc Maximum static load 4,000 kg Diameter 205 mm Height 54 mm Thread M 24 x 2 Leveling height 25 mm Weight 4.3 kg - 4 pieces total price -

Roller Chassis - Carrier Chassis YALE Payload 2,000 kg Flange width 66 to 220 mm Flange thickness max. 25 mm Smallest curve radius 1.15 m Hand force at nominal load 7 kg Weight approx. 16 kg 16 units in stock - unit price

CNC lathe Daewoo Lynx 200 B CNC Fanuc 21t, 10 tool turret tailstock, bar feeder The machine can be seen under power in our warehouse (M i m u)

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: ABW, live center -Type: ZNB 204 -Recording: MK4 -Dimensions: Ø 100 x 215 mm -Weight: 3.5 kg

Clamping rail, guide rail, support rail, stop rail, T-slot rail -Clamping rail: with T-slot on both sides -Length: 200 mm -Groove width: 10 mm, dimensions see photo technical drawing -Dimensions: 200/55/H32 mm -Weight: 1.9 kg

Key data: 300 mm, 570 mm, 5000 1/min

Machine Details Stock-No. 1105-04044 Type of machine CNC Lathe Make MAZAK Type QT NEXUS 200 Year of manufacture 2009 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Japan Delivery time immediately Freight basis ex work Technical details turning diameter 350 mm turning length 575 mm Diameter bar 76 mm swing dia. 475 mm control Mazatrol Fusion 640 T X-Axis 190 mm Z-AXIS 570 mm total power requirement 26/22 kW weight of the machine approx. 5 t dimensions of the machine approx. 3.4 x 1.8 x 1.9 m Additional information mazatrol fusion 640 t 2 AXIS tool eyes chip convoyer tailstock

Key data: 4300 KW, 4300 kVA, 11000 V

17.2 MW 2015 Used MWM 2032V16 Power Plant For Sale Used MWM TCG 2032 V16 Generating Sets For sale Engine manufacturer: MWM Engine Type: 4 x MWM TCG 2032V16 Engine output: 4.300 KW /each Year of built: 2015 Working Hours: #1 at 18607 operating hours #2 at 12261 operating hours #3 at 17068 operating hours #4 at 19206 operating hours Alternator Type: AVK DIG 156 L6 Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 4300 kVA – 4.3 Mw /each Speed: 1000rpm

Clamping plate, marking plate, measuring plate, measuring table, surface plate, marking plate -Manufacturer: Stolle, clamping plate with support ribs -Length: 2005 mm -Width: 1500 mm -Plate thickness: 40 mm -Plate: with support ribs -Transport dimensions: 1500/2005/H500 mm -Weight: 1800 kg

As good as new chiller (built in 2019) air + water-cooled. Ready to use

turning diameter over bed: mm spindle passage: 23 mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

workpiece length: 2000 mm max. workpiece diameter: 400 mm min. workpiece diameter: mm bore spindle turning speed range: 260-1850 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.