warehouse used for sale

Formwork inclined columns newly hot-dip galvanized 2,10-3,50m a 40,90EUR/ pcs. New galvanized or painted construction supports 3.00m, 3.50m, 4.00m at great conditions directly from the factory. From 21,50€/ piece.+ VAT Construction support painted 1,60m - 2,90m = 21,50€/ piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Fischer Imaging Mammotest Plus S with: Mammotome SCM 23 (biopsy) Tube Varian M-147 SP 0.1/0.3 complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patien ...

Machine Details Warehouse number 1105-03592 Machine type lathe - cycle controlled FAT brand Type TUR 630 MN Year of construction 2011 Control type CNC Control Siemens 810D MANUAL TURN Storage location FRANCE Country of origin Poland Delivery time immediately Freight base Freely loaded from location Technical details Turning diameter 370 mm Turning length 3000 mm Top height above bed 630 mm Circulation diameter max. via face slider 370 mm Spindle bore 105 mm Spindle speeds: 2 stages 2 - 2500 rpm Tool holder REVOLVER VDI 40 Control Siemens 810D MANUAL TURN Total power requirement 18.5 kW Machine weight approx. 6 t Information Equipment: REVOLVER 8 COMPARTMENT VDI 40 Chip protection wall automatic coolant device RS 232 interface 3-jaw chuck diameter 315 mm HOLLOW SPINDLE THROUGH. 105 MM automatic lubrication system Brochure LUNETTEN 1 STUCCO

OEC Medical System Compact 7600 with: Tube Nagel & Goller EP-F-190 0.6/1.5 Image amplifier 23 cm LIH (Last Image Hold) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians  ...

25x 250 ltr. VA2 transport tanks / transport containers, slightly pressure-resistant, manufacturer: Umformtechnik Hausach, used, round standing, stackable (only empty recommended), dom above NW 125 with safety valve system Stöklin + 2x CO2 valve large NW 40 + small NW 25 system Stöklin, residual outlet with disc valve NW 50, operating pressure 0.9 bar, test overpressure 2 bar, pressure resistant for e.B. overlay with CO2 or CO2 impregnate, ideal also for refilling barriques, Weight/h.: 57 kg, cleaned inside, very stable design, can be driven under with pallet truck or e-ant Diameter: 0.62 m, H: 1.50 m, Price/hour: 550,- € plus VAT ex warehouse Dolgesheim

Cable Extension Sensors, Posiwire WS7.5-10000-HPROF-SB0, ASM, new Manufacturer: ASM Type: Posiwire WS7.5-10000-HPROF-SB0 Measure length 10000mm Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Cable Extension Sensors, WDS-40000-P200-M-S0, Miro Epsilon, new, Manufacturer: Micro Epsilon Type: WDS-40000-P200-M-S0 Measure length: 40000mm including test report Attention! We have set the lowest price for the new part on the market. We have other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

Vortex Flowmeter 8800, F020SD1N3D1I1M5, Rosemount, EEx, new Manufacturer: Rosemount Type: Vortex 8800, F020SD1N3D1I1M5 Ex protected Attention! We have set the lowest price for the new part on the market. We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. Since we know that the device works, we give you a functional guarantee when you buy it. If the device does not work within 6 months after purchase you can return the goods and we will refund the purchase price.

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

Braking resistor, original packaging, ERBG012R01K9 Lenze, new Attention: Original Lenze product - No replica from… - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

COURSE AXIS X: 840 MM COURSE ASSE Y: 860 MM COURSE ASSE Z: 840 MM TAVOLA SIZE: 630 X 630 MM TABLE RANGE: 1,200 KG TABLE INDEX: 1ST MANDRINO POWER: 30/25 KW ROTATION SPEED: 12,000 GIRI/MIN ATTACK: BT 50 NASOMANDRINO/PALLET: 50-810 MM MANDRINO - TAVOLA: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAXIMUM HEIGHT OF THE PIECE: 1000 MM CONTROL: MSG-502 BUILT: 2002

Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation,  ...

Accessories for Hacker Schuko ZM900-K, Y.O.M. 2014 Almost new replacement sieve with 15mm hole diameter 19 unused spare knives 34 x 34mm 2 side cuttings 20 fastening screws Built probably 2014 Please refer to the PDF file with our terms and conditions and order form. The machine can be presented on site by appointment. We only offer machines that are ready for use in our warehouse, see "further offers from this supplier".

Centrifugal pump, CRI10-02 A-CA-I-E-HQQE, 15,3/20m, 10m³/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertikale, mehrstufige Kreiselpumpe. Die medienberührten Bauteile der Pumpe sind aus hochwertigem Edelstahl. P: 0,75 KW, H: 15,3m, Hmax: 20m, Q: 10m³/h Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will re ...

Servo motor + electric sled, EMMS-AS-70-M-LS-RMB + EGSK-46-200-10P, Festo, used Top Attention: Original Festo product - No replica from… Special price ! If you have a VAT number we will gladly issue an invoice without VAT. As good as new! From my assessment, the linear actuator is as good as new, but is sold as used. The part was purchased from a spare parts store of a company and has never been in operation. The actuator was installed, tested, disassembled and stocked in the spare parts warehouse as a replacement linear actuator. Servo motor EMMS-AS-70-M-LS-RMB, Festo Electric slide EGSK-46-200-10P, Festo Functional guarantee! For second hand parts we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase ...

NEW JOB CENTER! 480 HOURS TO POWER ON! COURSE AXIS X MM 1,000 COURSE ASSE Y MM 550 COURSE ASSE Z MM 500 TAVOLA DIMENSIONS MM 1.100x502 TAVOLA PLAN: 130-630 MM MAXIMUM LOAD ALLOWED: 700 KG ATTACK: BT40 GIRI/MIN VELOCITY SPEED 12,000 TOOL WAREHOUSE: 24 FANUC CONTROL 0i-MF COMPLETE OF TAVOLA 4/5th ASSE LEHMANN SOO EDITION 3

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...

Electric debar barlift truck Manufacturer Jungheinrich Germany Type: AMEISE EJC 12.5 115 400 T Drive: 24 VOLT DC ( 2 x 12 volt batteries) 1 Wheel drive steering via drawbar Load capacity: 1.25 to at load center of gravity 600 mm Bevfzmxsnl Stroke: electro-hydraulics Lifting height: max 410 cm Fork length: 82 cm Mast retracted: 250 cm Total length: approx. 160 cm width approx. 84 cm Features: Charger + 2 normal used 12 volt batteries Can be used in the warehouse

We offer 18 x formwork Peri Trio 240 x 120 elements on ( Top-up element ) 10 x Peri Trio 240 x 120, 60 % discount a 739,20EUR - - good used frames - - good used formwork skin 8 x Peri Trio 240 x 120, 50 % discount a 924,00EUR - - good used frames - - new formwork skin Package price: 14.784,00EUR net Also available separately Subject to sale All prices without VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

Warehouse No. : G15887 Machine type : Toolbox / Transport box Make: - Type : - Year of construction : - Technical data Dimensions 1500 x 900 x 890 mm Weight approx. 200 kg 2 compartments inside 200 x 200 x 750 mm each Wall thickness approx. 4 mm stable heavy toolbox for transport or assembly

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

Warehouse No. : G1498 Machine type: Small measuring table Make: - Year of construction : - Type : - Gêbr. stable small measuring table with cast foot and threaded ring for Height Technical data Measuring height 270 mm Extension 115 mm Table size 170 x 155 mm Measuring clock holder 10 mm Column diameter 50 mm Dimensions (LxWxH) 175 x 260 x 420 mm Weight approx. 19 kg

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 60 lfm Shelf offer 60 lfm consisting of: - 47 x stand approx. 200 x 60 cm. - 230 x floor approx. 127 x 60 cm. - 920 x clip for shelf - incl. 16 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 7888,00 € net €9386.72 gross You will receive an invoice with VAT shown.

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 100 lfm Shelf offer 100 lfm consisting of: - 78 x stand approx. 200 x 60 cm. - 385 x floor approx. 127 x 60 cm. - 1540 x clip for shelf - incl. 26 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 13.933,00 € net €16,580.27 gross You will receive an invoice with VAT shown. Our recommendation : Let us know your needs... We are happy to help yo ...

Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt

Siemens AXIOM Aristos FX Plus with the following device components: Generator Polydoros LX 30/50 Tube Opti 150/30/50 HC 0.6/1,0_Year of manufacture 2014 (ceiling-hanging) Vertical stand Aristos FX (ceiling-hanging) 1 Detector Trixell Pixium 4600 43x43 cm_Product No. 100204 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the b ...

used cone round wherker Benier type Allround with adjustable angles for small and large weights.Kegelrundwiker is with heating and oiling.The cone round wherk is immediately available in the warehouse in Bielefeld. We will be happy to send you further pictures and details on request. Weight range from 100-1300 grams up to 4500 pieces / hrs ( depending on the dough weight) with leakconveyor belt with heating with oiling Built in 2005 Teflon coated cone and wire cara Dimensions: Height: 150 cm Width: 134 cm Depth: 132 cm

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 10,45 lfm Shelf offer 10,45 lfm consisting of: - 09 x stand approx. 200 x 60 cm. - 40 x bottom approx. 127 x 60 cm. - 160 x clip for shelf - incl. 3 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Price: 1790,00 € net 2130,10 € gross You will receive an invoice with VAT shown. Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Our recommendation : Let us know your needs... We are happy to help you ...

Dough pre-portioner 3 rolls dough strip former from Rijkaart with 45cm tape and roll width with large hopper.Machine is mobile on rollers, 400 volt connection.Machine is immediately available in the warehouse. 1x Roller 45cm wide large funnel on large rolls with a set-up completely made of stainless steel

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

used Benier brotteig precursor with adjustable wits completely in stainless steel.The machine is immediately available in the warehouse in Bielefeld.Further used bakery machines please see the catalogue on the right we have more than 700 machines in stock in Stock. Built in 2002 400V / 50 Hz Stainless steel cladding with 2 blowers Scrapers are adjustable checked and cleaned Condition "good" Dimensions: Height: 150 cm Width: 220 cm Depth: 110 cm

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - D : approx. 60 cm - L : approx. 60 lfm Shelf offer 60 lfm consisting of: - 47 x stand approx. 200 x 60 cm. - 230 x floor approx. 127 x 60 cm. - 920 x clip for shelf - incl. 16 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 8912,00 € net €10,605.28 gross You will receive an invoice with VAT shown.

Shelf shelves, small parts warehouse, small parts rack, storage racks, workshop shelf, plug-in shelf Data: - H : approx. 200 cm - T : approx. 40 cm - L : approx. 100 lfm Shelf offer 100 lfm consisting of: - 78 x stand approx. 200 x 40 cm. - 385 x floor approx. 127 x 40 cm. - 1540 x clip for shelf - incl. 26 x cross with tensioner. - Manufacturer: Nedcon SF1 - Load: 150 kg per floor, with evenly distributed load. - Levels: 5 x storage levels. - Shelves galvanized. - Stand galvanized. - New goods from stock. - other quantities available! Due to the current situation on the steel market, fluctuating inflation surcharges can occur again and again. Therefore, if you are interested, please contact us. Price: 11.601,00 € net €13,805.19 gross You will receive an invoice with VAT shown. Our recommendation : Let us know your needs... We are happy to help yo ...

Pull-off trolley with 9 cloth pull-off apperates suitable for Heuft VTR Thermo Roll / Daub RDTO Thermo Roll oven. The pullers can be used for ovens with 2 times deep sheet metal mass 80x60cm. With this pull-off appress and a stone slab trolley, they can also bake in the Thermöl wagon oven on stone served by a Man.Option we also have the stone slab cart for two times deep oven in the warehouse. with 9 pullers on rolls Stainless steel trolley Dimensions wagons: Height: 196 cm Width: 160 cm Depth: 90 cm

Aluminum circular saw machine make KALTENBACH type SKL 450 NAYear of manufacture 2001Technical specifications:Saw blade diameter: 450 mmCutting speed stepless: 0 - 3000 mm / min.Rapid return: 4500 mm / min.Cutting range around 90 degree: 160 mm: square 90 degree: 145 mm: square 45 degree: 130 mm: flat 90 degree: 250 x 40 mm: flat 45 edree: 320 x 50 mmStroke length of the automatic feeder: 1000 mmMultiple stroke: 9999 mmSwivel range for multiple strokes: 180 degreeExternal dimensions approx .: 2700 x 1450 x 1900 mmWeight approx .: 1480 kgWorking height :: 1010 mmDrive power: 3.7 / 4.7 kWused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machi ...

1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...

Aluminum automatic saw make ELUMATEC type SA 73/25Machine -No: 20124 built in 1990for mass cutting of aluminum profilesTechnical specifications:Saw blade diameter :380 mmSaw blade bore: 32 mmCutting area: 195 x 120 mmSaw blade speed: 3000 rpm.Pivoting range:90°Feed lengths:5 - 250 mmTable size: 200 x 600 mmVoltage: 220/380V 50HzPower output: 3 kwCompressed air connection: 7 barDimensions: 2700 x 1350 x 1470mmApprox. weight: 140 kgwith- Saw blade 370 mm- Micro spray device- pneumatic material clampingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...

Radial arm Saw make ELU type 1251Machine -No: 0045 Year 1993Cutting area longitudinal: 645 x 68 mmtransverse: 370 x 68 mmSaw blade size: 250 mmSaw blade speed: 2800 rpm.Boom rotatable by: 360 °Motor mount rotatable by: 360 °Connected load: 1450/1100 WPower connection: 220 V 7 50 HzWeight: 54 kgExternal dimensions: 1150 x 1150 x 2000 mmWith- Chip extraction- side and rear chip protection- Underframeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Schröter Type: wafer cutting machine wafersize: 360 x 450 mm product high: max 5-80mm Output: approx. 5 double cut´s electrical: 400 V, 3 Ph different: automatic cutting machine for rectangular wafer, with a longitudinal and a cross-cut, wafer holder, retainers and 2 pcs cutting frame, first cut strip width 32 mm / second cut strip width 30 mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

used vertical hydraulic internal clearing machine with 3 clearing points in very good condition Pulling power:8.000 KG Clearance length: 1000mm Bgno2qtoyx Clearing: 3 pieces (4 pieces) Distance between clearing points:100mm Mounting diameter of the drawing heads3 x x 85mm Workpiece diameter: max. 1x 460mm / 2x 198mm / 3x 98mm Cutting speed: hydraulically infinitely adjustable from 1m/min up to max. 7m/min Return speed: hydraulically infinitely adjustable from 5 to max. 25m/min Space requirement of the machine (b x t x h) approx.:1400 x 2000x 3600mm (without service & operator environment) Power supply / connection value: 380Volt 50 HZ / 6.5 KW Accessories / Optional equipment: -manual and automatic clearing operation - Drawbridge for 3 clearing points - Workpiece table for 4 clearing points (only usable with special pullheads) - automatic tool feeder - tension dis ...

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: DLT4 drytunnel, incl. Belt electrical: 400V 50 Hz, 1,5kw dimensions: 2800x1100x1500mm (lxwxh) different: Belt width: 250mm, High 1100mm We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau (EXW) unpacked

Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum circular saw machine make EISELESaw blade diameter :: 250 mmCutting area: 90 °: 45 °at Sägeblattdrm. 275 mm: 120 x 75 mm: 80 x 75 mmL-iron: 80 x 80 mm: 80 x 75 mmFlat iron: 120 x 75 mm: 80 x 75 mmSquare steel: 75 x 75 mm: 75 x 75 mmRound material: 90 mm: 90 mmSolid material round: 60 mmStandard saw blade: 275 x 2.0 x 40 mmDrive power:: 1 / 1.2 kWMachine head can be swiveled on both sides: 45-90-45-30 °Dimensions: 900 x 800 x 1100 mmWeight approx .: 230 kgused, from an operational resolutionin good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

-Built 03 / 2007 -with oil burner -with 2 stikken wagons -with ramp -with exhaust air hood with integrated temperature and baking time indicator -digital control -for 60x80cm / 58x78cm sheets -Door stop on the right -available in the warehouse -Door with open-cut viewing window

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

20x 800 ltr. VA2 transport tank, used, round standing, stackable, dome top 400 mm, residual outlet with disc valve NW 80, operating pressure 2 bar, test overpressure 3.4 bar, overpressure valve in the lid, pressure resistant for e.g. overlay with CO2 or CO2 impregnation, weight/h: 130 kg, cleaned inside, pressure-tested, very stable design, diameter: 1 m, H: 1.60 m, Price/pc: 940,- â?¬ plus VAT from dolgesheim warehouse