warehouse used for sale

Industrial shock absorber, MC 64 150M0, ACE, new Special price The current price of a similar product is appr. € 850 If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. However, we give you a functional guarantee. If the appliance does not function when put into operation within 3 months of purchase, you can return the goods and we will refund the purchase price.

GE Revolution XR/d with the following system components: Generator Jedi 80 tube MX 100 0.6/1.25 1 x detector 41cm 41cm separate mobile X-ray table company Zetta • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

BKW - WATER HEAT EXCHANGER Top condition little in use as good as new condition BKW WATER/WATER HEAT EXCHANGER RWT30-1KKP Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT30-1KKP Cooling capacity: 10.0 kW Connections: R3/4" IG Cooling water consumption: approx. 29.0 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: 27.0 °C Water outlet temperature: 25.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: 40 liters Pump power (50Hz): 70 / 4.1 l/min / bar Pump power (50Hz): 100 / 3.0 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 4 ...

Siemens AXIOM sire Skop SD with the following system components: Generator Polydoros SX 65 Tube Optitop 150/40/80 HC 0.6/1.0 digital image processing Fluorospot compact Image intensifier Sirecon 40-4 HDR 40 cm The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

Carestream DryView 6850 (laser printer) The sale is to resellers or distributors despite full functionality without warranty as "Used", EXW Freiberg, Saxony, Germany. You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, properly lashed and wrapped with stretch film and can be picked up immediately.

BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Top condition little in use BKW WATER/WATER HEAT EXCHANGER RWT10-1KK Manufacturer: BKW Kälte-Wärme-Versorgungstechnik GmbH Street: Benzstr. 2 72649 Wolfschlugen Country: Federal Republic of Germany Device name: Water/Water Heat Exchanger Device type: RWT 10 -1KK Cooling capacity: 6.0 kW Cooling water consumption: approx. 17 l/min Min. differential pressure: 2.0 bar operating pressure: 10.0 bar Inlet temperature: 20.0 °C Outlet temperature: 25.0 °C Water inlet temperature: max. + 30.0 °C Water outlet temperature: max + 35.0 °C pressure loss: 0.6 bar Operating weight: 170 kg Filling capacity of the water tank: approx. 40 litres Pump power (50Hz): 65 / 2.5 l/min / bar Conveying medium: Water Viscosity: 1.0 mm²/s Operating voltage: 400 / 50 V / Hz Control voltage: 24 VDC Total electri ...

Machine type: CNC centerless grinding machine Make/Model: MIKROSA KRONOS M SPECS CNC Fanuc 21iM grinding wheel max sizes: 250mm wide x 610mm diameter 2 controlled axis on grinding wheel dressing (interpolated) 1 axis on regulating wheel 1 axis on plunge axis (workpiece diameter) Throughfeed grinding: yes Plunge grinding: yes can be inspected under power in our warehouse in Gussago BS (Italy)

The vertical milling center FADAL VMC 2216 FX was manufactured in 2007 by the FADAL concern in the USA. The machine is equipped with FANUC Oi-MC numerical control. The milling machine can process workpieces weighing up to 450 kilograms. Machine travels in the X, Y, Z axes are 550 mm, 400 mm and 500 mm, respectively. The spindle revolutions of the CNC milling machine reach 8000 rpm. The center has a warehouse for 21 tools. Perfect for working with single details as well as for larger-scale processing. Technical data of the FADAL VMC 2216 FX machining center - CNC control: FANUC Oi-MC - table length: 406 mm - table width: 990 mm - maximum weight of the workpiece: 450 kg - X axis travel: 550 mm - Y axis travel: 400 mm - Z axis travel: 500 mm - maximum spindle speed: 8000 rpm - tool magazine: 21 - handle: SK 40 - spindle motor power: 11.2 kW - power demand: 35 kVA - power o ...

Price on request. FCA free loaded in our warehouse. One second hand Siemens Twin AFA 46 condensing steam turbine manufactured in 2009 for sale. turbine: Siemens type: Twin AFA 46 el. power: 3.300 KW running hours: steam consuption: steam inlet pressure: 26 bar inlet steam temperature:400°C manufactured: 2009 generator: AVK powerrating: 4.125 KVA volts: 6.300 volts Hz: 50 Hz price on request: Stromerzeuger-Discount Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 0049/1635263546 Telefon: 0049/ 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Ladies and gentlemen, We have following oil transformers in stock from years 2006 to 2015 in top condition. SERVICES: 100KVA to 3500KVA VOLTAGE: 6KV to 33 KV to 400 V or 690 V 1000 kva 20/0.4 KV 1250 kva 20/0.4 KV 1600 kva 20/0.4 KV 2000 kva 20/0.4 KV 2300 kva 12/0.4 KV 2300 kva 20/0.4 KV 2500 kva 15/0.4 also 20/0,4KV 22KV 3500 kva 30/0.4 KV 3500 kva 20/0.4 KV Other sizes and voltages also available from 100 KVA kva up to 3,500. All transformers are in mint condition and immediately available from our warehouse in 59557 LIPPSTADT. Nationwide delivery inclusive. Any further questions can be reached Mon to sat 8 am to 10 pm.

New gas pressure regulator, Itron, DN80, RR16-80-82-12N-SL-IZN.1 Manufacturer: Itron Type: RR16-80-82-12N-SL-IZN.1 - DN80, PN16 - W DSO 35 mbar - 250 mbar Condition: The gas pressure regulator was purchased from a spare parts warehouse of a company and is still in its original packaging Dimensions: 43cm x 40cm x90cm high Weight: 63 kg

Many thanks for your interest in our second-hand machinery, please find below our offer: manufacturer: Ulma foilwrapper Type: DH 2 identical with Sapal PRLP year: unknown output: 90-130 Stck. pcs/min format size: min. 20 x 15 x 6 mm (lxwxh) max. 55 x 35 x 15 mm (lxwxh) Enginepower: 1 HP electrical: 220/380 V; 3 ph; 50 Hz dimensions: 2050 x 1420 x 1240 mm weight: ca. 1135 kg different: Suitable for 4/5 grm, diam. approx. 19/20 mm chocolate bonbons Pralie wrapper with alufoil from the reel, brush folding The Ulma DH2 Praline wrapper is identical with Sapal PRLP The machine was bought by the previous owner in rebuilt condition, but hardly used and treated very carefully. top condition We offer this machine in 'as is' condition, without warranty, ex warehouse/location (Incoterms EXW and without packaging. ex Stock Hess. Lichtenau germany, (EXW) unpack ...

Price on request. FCA in our warehouse D-Bergisch Gladbach. Used Leroy Somer 1500 KVA generator end type: LSA52M7 in good working condition for sale. generator end: Leroy Somer type: LSA52M7 alternator weight: 3.9 to voltage: 400 V powerrating: 1500 KVA speed: 1500 r/min Stromerzeuger-Discount.com Kürtener Straße 13 D-51465 Bergisch Gladbach Mobile: 00491635263546 Telefon: 0049 2202 2492256 Fax: 0049 2202 2492257 Email: info@stromerzeuger-discount.de

Immersion pump, MTR 15 16/16 A-W-A-HQQV, 15 KW, 225m, 17m³/h, Grundfos, used Special price (The current market price for a new device is € 8,380 excl. VAT) If you have a VAT number, we will be happy to issue you an invoice without VAT. Used! The part was purchased from a spare parts warehouse of a company, is in very good condition and fully functional. - 15 KW - Hmax. 225m - 17m³/h - 400/660 V - 50 Hz - 2920 rpm - Immersion pump, cooling lubricant pump - Pump stainless steel - Immersion depth 80cm - Overall dimensions 148 x 45 x 50cm - approx. 200kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. Since we know that the device works, we give you a functional warranty when you buy it. If the device does not work within 3 months of purchase, you can return the goods and we will refund the purchase price.

We offer for Peri Maximo MX 15 270 x 240 frame formwork: Maximo MX 15 / 270 7 x Element MX 270 x 240, newly occupied, 40% discount a 1599,00€ 18 x Element MX 270 x 240, used, 50% discount a 1332,50€ 2 x Element X 270 x 120, newly occupied, 40% discount a 924,00€ 3 x Element MX 270 x 120, used, 50% discount a 770,00€ 9 x Element MX 30 x 240, newly occupied, 40% discount a 3901,30€ - Frame + formwork skin top condition - Newly occupied or good used formwork skin - Frame primed and varnished with zinc phosphate paint. - SB2/3 easily possible They offer on 1 element MX 270 x 240, newly occupied, 40% discount a 1599,00€ Subject to sale All prices excl. VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Compa ...

Manufacturer: Pepperl and Fuchs Type: F2D0-FB-EX4.CG For FOUNDATION Fieldbus H1 and PROFIBUS PA Attention! We have on the market the best prices, several quantities and many other parts of the company Pepperl and Fuchs. Buy more than 1 piece, there is still a great discount. New! The part was bought from a spare parts warehouse of a company and is completely new.We give you a functional guarantee for 6 months. If the device fails, we will replace it with a new one or refund the purchase price. We have more parts. Technical specifications: abcs://abc.pepperl-fuchs.com/germany/de/classid_454.htm?view=productde tails&prodid=52721#overview

Loader for centerless grinders L = 4m motorized The machine can be inspected in our warehouse in Gussago BS. Mimu Machine Tools

Manufacturer: Sick Stegmann Motor feedback Hiperface Sin / Cos periods 4096 Umd - New Type: SCM70-HYA0-K01, Attention! We have the best prices on the market and many other parts from Sick Stegmann. Buy more than 1 piece, there is still a great discount. New! The part was bought from a spare parts warehouse of a company and is completely new. We give you a functional guarantee for 6 months. Should the unit fail, we will replace it with a new one or refund the purchase price.

Used Metal Band Saw Internal machine number m3278 Manufacturer PEHAKA Type SM 4 Year of construction unknown Cutting width approx. 380 mm Total height approx. 1.95 m 2 Cutting speeds Table size approx. 625 x 480 mm Weight: approx. 350 kg Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out under power. We will be happy to send you further photos by e-mail. A forklift/crane for loading is available. Prior sale is reserved. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data.B, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with transfer of risk t ...

Chiron FZ18W Magnum rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Sunnen EC3500, honing machine, also single stroke progressive honing, holes: 1,5 to 165mm dia., spindle motor 5.5HP, auto stone compensation, auto sizing available as option, like new - low hours (1530), More pics available, Under power in our warehouse. Test run possible., Mimu Machine Tools (Italy)

Paint booth Wolf-Taifuno: Make : Wolf, Type 4/B, Taifuno Year of manuf.: Cabin 2011, Aggregate 2009 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pc recessed luminaires with 4 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x40x3 mm Heating unit : 209 kW Energy saving : Speed control with frequency converter and heat recovery Dry temperature : 80 degrees C Oil burners : Weishaupt brand, alternatively gas burners Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 21,200 m3/h; 7.5 kW, 1500 1/min Exhaust air unit : 21,000 m3/h; 7.5 kW, 1,500 1/min Pipelines : Supply and exhaust air pipes, deflecto ...

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Mondomix BV Niederlande Type: VA 15L year: approx. 1998 output: 150 - 450kg/h Volume 2,1 Liter electrical: 4 kW, 380 V, 50 Hz, 3 ph dimensions: 2410 x 650 x 1750 mm wight: 500kg different: Continuous Aerator We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Paint booth: Make : Wolf Year of manuf.: Cabin 2011, Aggregate 1993 Dimensions : 4.0 m x 7.0 m x 2.9 m (approx. WxLxH), total height 3.7 m Supply air blanket : Filter ceiling Lamps : 2 x 4 pcs recessed luminaires with 3 x 58 W each Entrance side : 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door : 0.65 m x 2.8 m (approx. WxH) Rusting : Full surface rusting 5x15 pcs. 790x495 mm, support bar 790x50x3 mm Heating unit : 267 kW Oil burners : ELCO brand, alternatively gas burners Dry temperature: 80 degrees C Exhaust gas fireplace : stainless steel, single-walled, diameter 250 mm length approx. 6 m Supply air unit : 22,800 m3/h; 7.5 kW, 960 1/min Exhaust air unit : 22,500 m3/h; 7.5 kW, 960 1/min Pipelines : Supply and exhaust air pipes, deflector hood, air intake curve Electrics : Control cabinet The paint booth was originally a Wolf drying booth, but wi ...

Now available: NEW Wartsila 8 cylinder L20 crankshaft available from stock (ex Warehouse Bengi NL) Class certificate Price upon request

Now available: Wartsila 8 cylinder L32 crankshaft RECON All main journals ground to -1,00 mm undersize, crankpins to remain standard size with counterweights with drive gear with Class certificate (DNV) Available from stock (ex. Warehouse Bengi NL) Price upon request

Warehouse/stock # 5033 Valve proportional H10 / 11 Bosch No. 0811 404-416, incl. Bosch No. 0831 006 003 Bosch No. 0810 090 411 Bosch No. 0811 404-034 used

Now available: Wartsila 20 (original) cylinder heads reconditioned Cylinder heads are pressure tested and come with Class certificate Available from stock (ex Warehouse Bengi NL) Price upon request

Stock number 1105-02617 Machine type flat grinding machine Make Elf Type OPTIMALLY 4250 NC-K Built in 1993 Control type NC Storage warehouse Country of origin Germany Delivery time immediately Exhibition Hall, ver free freight basis Technical details Grinding length 450 mm Grinding width 250 mm Workpiece height 375 mm Table length 800 mm Table width 250 mm maximum work-piece weight 400 kg Autom. Cross feed adjustable 3-50 mm / stroke Vertical delivery, 1 Division 0.001 - 0.06 mm Grinding wheel diameter 300 mm Grinding wheel width 50 mm Grinding wheel diameter 36 mm Voltage 380 V Grinding spindle motor 3.7 / 4.7 kW Total power demand 9 kW Machine weight approx. 2.6 t Space requirement of approx. 2800 X 2500 2300 mm Additional information automatic delivery -Electro magnetic clamping plate with straight fine pole pitch, dimens ...

Now available: Wartsila 32 (original) cylinder heads reconditioned Cylinder heads are pressure tested and come with Class certificate Available from stock (ex Warehouse Bengi NL) Price upon request

MCM Clock 600 14 pallet 500x500 CNC FANUC 16iM 15000 RPM Jfmx Supervisor centro di lavoro multipallet FMS multipallet horizontal machining center in FMS under power in our warehouse Mimu machine tools (Italy)

Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER

X-AXIS STROKE: 840 MM Y-AXIS STROKE: 860 MM Z-AXIS STROKE: 840 MM TABLE SIZE: 630 X 630 MM TABLE CAPACITY: 1,200 KG SPINDLE POWER: 30/25 KW ROTATION SPEED: 12,000 RPM ATTACHMENT: BT 50 NASOMANDRINO/PALLET DISTANCE: 50-810 MM SPINDLE-PLANK DISTANCE: 150-990 MM TOOL WAREHOUSE: 120 STATIONS MAX. WORKPIECE HEIGHT: 1000 MM CONTROL: MSG-502 YEAR OF BUILD: 2002

Machine Details Warehouse number 1105-03539 Machine type CNC lathe Mori SEIKI brand Type SL 15 MC Year of construction 1995 Control type CNC Control fanuc 16 T Storage location FRANCE Country of origin Japan Delivery time immediately Freight base from stock Price Technical details Turning diameter 420 mm Turning length 560 mm Control fanuc 16 T Vibration diameter 455 mm Rapid traverse in X and Z direction 18/24 m/min Travel x/z 220 / 520 mm Rod diameter 45 mm Spindle motor 11 / 7.5 kW Spindle speed 50 - 5000 rpm Spindle torque 143 Nm Spindle nose JIS A2-5 Revolver Stations 12 Tailstock pinole holder MK 4 Tailstock pinole stroke 80 mm Tailstock pinole diameter 75 mm Tailstock travel 450 mm Total power requirement 25 kW Information - CNC - Control MSG 516 fanuc 16 3 BAKE FOOD KITAGAWA DIA 165 - Coolant device SPAENEFOERDERER

YEAR 2012 STROKES X, Y, Z: 800X610X600 MM SPINDLE DISTANCE TABLE 150-720 MM FAST 36 M/MIN SPINDLE BT40 RPM 10,000 (12,000) RPM 30-SEATER TOOL WAREHOUSE CNC FANUC 18I-MD CHIP EVACUATOR ADDUCTION AT HIGH PRESSURE SPINDLE CENTER N ° 2 REVOLVING TABLES WITH ROTATING COUPLING FOR HYDRAULIC CONNECTIONS WITH LOCKING EQUIPMENT.

OKUMA MACHINING CENTER MODEL: MX-60HB TABLE: 630X630 mm X-AXIS STROKE: 1000 mm Y-AXIS STROKE: 810 mm Z-AXIS STROKE: 800 mm TOOL WAREHOUSE: 150 SEATS CONTROL: OSP-E100M

Many thanks for your interest on our Frisse double Z kneader, please find follow our offer: Manufacturer : Richard Frisse Herford Type : ZK 25 Kneader Year of manufacturing : 1986 Electrical : 380 VAC complete volume : 250 l usable Volume : 200 l Dimensions : ca. 2030x1000x1300 (l/w/h in mm) Weight : ca. 2000 kg Different : Condition OK trough tiltable We offer this machine in as is – where it is” condition, without warranty ex Warehouse Hess. Lichtenau (EXW), unpacked

OKUMA MACHINING CENTER MODEL: MA-400HA TABLE: 400X400 mm Nr. PALLET: 2 X-AXIS STROKE: 560 mm Y-AXIS STROKE: 610 mm Z-AXIS STROKE: 625 mm ATTACK: HSS63 TOOL WAREHOUSE: 60 SEATS CONTROL: OSP-E100M

Technical details TYP/Model: Formmaster 6/30 Table surface: 600 x 300 mm Table adjustment lengthwise: 700 mm Cross: 300 mm Grinding area: 600 x 300 mm Grinding height max: 300 mm Magnet: 600 x 320 mm Grinding slices: 220 x 25 x 52 mm Automatic vertical delivery: Yes Connection: 8 kW Accessories: Auto. Vertical delivery; Full enclosure, magnet, Wet grinding; Depulsion for grinding discs Condition: Good Addition: The machine can be visited in our warehouse, not currently under electricity! Weight: 2.6 t Dimension machine about: 2,700 x 2,200 x 2,500 mm Subject to change and error in the technical details and details.

Philips Diagnost H with the following system components: Generator Optimus 50 Tube SRO 33100 0.6/1.3 Vertical stand Diagnost VE • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

CNC monitor and keyboard NUM CNC (760-1040) top condition Visible in our warehouse in Gussago BS. Mimu Machine Tools

Krebser Kehrli urological xray system UX 96 L with the following device components: generator Stadler SE 3000 tube Comet DI 86 HS-33/100-150 0.6/1.3 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient  ...

CNC NUM 760 full cnc visible in our warehouse in Gussago BS Italy

Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Machine Details Warehouse number 1105-03576 Machine type CNC lathe - inclined bed machine LeadWELL brand Type T 6 L Year of construction 2011 Control type CNC Control FANUC O ITB Storage location HAGUENAU Country of origin Japan Delivery time by appointment Freight base EX WORK Technical details Turning diameter 210 mm Turning length 400 mm Control FANUC OI TC Travel - x 125 mm Travel - z1 460 mm Rod passage: 50 mm Number of revolvers: 1 piece Number of tools in revolver 1 12 pieces Speed range main spindle: 5000 rpm Drive power 7.5 kW Spindle nose A2-5 Feed range 1 - 15000 mm/min Rapid traverses 25 m/min Information CNC CONTROL FANUC OI TC 12 COMPARTMENT TURRET CHUCK + TAILSTOCK+ SWARF CONVOYER

Siemens small X-ray/intraoral x ray system Heliodent MD (tube SR 60/70/7 0.7) • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.

Siemens combined fluoroscopy and X-ray system Sireskop SX with the following device components: generator Polydoros SX 65/80 tube OPTITOP 150/40/80 HC 0.6/1.0 digital image processing Fluorospot TOP Image intensifier 40 cm PACS integration DLR 2nd Workplace 3D3 ceiling tripod 2nd tube OPTITOP 150/40/80 HC 0.6/1.0 vertical stand Vertix complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless oth ...

Siemens combined X-ray and fluoroscopy system Sireskop SX with the following device components: generator Polydoros SX 65 tube Opti 150/40/73 C 0.6/1.0 digital image processing Fluorospot H Image intensifier 33 cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the bu ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Formwork inclined columns newly hot-dip galvanized 2,10-3,50m a 40,90EUR/ pcs. New galvanized or painted construction supports 3.00m, 3.50m, 4.00m at great conditions directly from the factory. From 21,50€/ piece.+ VAT Construction support painted 1,60m - 2,90m = 21,50€/ piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, ...