walter machie used for sale

Cylindrical storage tank, factory new Capacity: 60 cbm / Medium: Fuel oil Material: S235JR (St 37.2) raw inside, blasted outside, primed and painted in RAL 7035 - light grey Dimensions: 2,500 mm diameter, 12,650 mm full length Design: according to DIN 6616/2 or DIN EN 12285-2, double-walled Test pressure inner tank 2 bar test overpressure Double jacket 0.6 bar incl. control fluid in double jacket for above-level storage with test certificate and documentation Container equipped with GOK Lag 2000 and limit sensor as overfill protection Equipment: 1 dome 600 mm li.W. with cover, gasket and screws 3'' filling cable with TW coupling 3'' Vent with cap 1 1/4'' Suction line with reduction to 1'' 1'' for limiter GWG 23-Ro 1'' nit dipstick 2'' reserve 1 pair of permanently welded steel saddle feet 1 suspension ladder with pedestal, galvanized according to UVV  ...

Hermann Waldner GmbH & Co. KG mobile depositor, type: MultiDos, machine number: 2371, year of construction: 2010, 230 / 400 V, 50 Hz, 18 kW, 32 A, weight: 750 kg, fillings: 3240 per hour, total dimensions: 3080 mm x 1420 mm x 2270 mm.

Waldner DOSOMAT 2.2 Rotary Cup Filling Machine Reliable rotary cup filling machine designed for automatic filling and sealing of semi-liquid food products in round cups. The Waldner DOSOMAT 2.2 offers efficient rotary operation and was completely overhauled in 2015, making it a dependable solution for dairy and food processing lines. General Information - Manufacturer: Waldner - Model: DOSOMAT 2.2 - Machine Type: Rotary, single-lane, double-cycle - Year of Manufacture: 1998 - Refurbishment: Completely overhauled in 2015 by GPS Reisacher - Electrical Panel Update: 2016 by Henkenjohann GmbH - Condition: Excellent used condition - Usage After Refurbishment: Used only for testing purposes - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation - Warranty: Sold as-is, without warranty Machine Dimensions and Weight - Di ...

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...

Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC Gantry Milling Machine Machine: 17-10 FP 300 NC / 5 m Serial Number: 2.8304.06 Original Year of Manufacture: 1983 In 2016, it was comprehensively overhauled and modernized by the manufacturer Waldrich Coburg. The machine is equipped with a modern Siemens SINUMERIK 840D sl control system and is ideally suited for heavy-duty machining of large and complex workpieces in machine, tool, mold, and power plant construction. The delivery includes a Universal Fork Milling Head USP 300 C 350 with B-axis as well as an additional Angle Milling Head WFU 500 SZ 400 F17 , ensuring versatile machining capabilities for demanding milling tasks. The machine features a modern full protective enclosure, coolant system, chip conveyor technology, and extensive technical documentation including circuit diagrams and overhaul documentation. The system  ...

A Hege/Walther Pilot painting system consisting of a wash booth, preparation room, spray booth, two drying booths, lift/lower station and manual hand-pushed monorail conveyor is offered. 1) Hege wash booth, year of manufacture: 2017, washing device: electrically heated steam cleaner, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 8000mm/5000mm/3000mm. 2) Walther Pilot preparation room, year of manufacture: 2008, ventilation: supply and exhaust air, heating: gas burner, booth dimensions X/Y/Z: approx. 5140mm/4120mm/3000mm. 3) Walther Pilot spray booth, year of manufacture: 2008, ventilation: supply and exhaust air, recirculation mode possible, heating: gas burner, booth dimensions X/Y/Z: approx. 6250mm/4120mm/3000mm. 4) Walther Pilot drying booth, year of manufacture: 2008, ventilation: recirculation mode, heating: gas burner, booth dimensions X/ ...

2 stubof disc sores WALTER 125 mm, F2052 1 stueck prism fraeser Walter F2052-460 170.6 / 171.2 2 piece disc freser WALTER 142 mm, F252-925

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

Ex pressure vessel with agitator, MDG 45, 100 hours, V4424140313 Walther, mint condition Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 5.020 excl. Mwst. If you have a VAT number, we will gladly issue you an invoice without VAT. Top Condition like a demonstration unit The part was removed from a new machine that is proven to have run only about 100 hours of operation. Top cleaned and ready for immediate use. Technical data: - Ex Stainless steel pressure vessel MDG45, 42.8 liters, 4 bar, Walther-Pilot. - Ex electric agitator with gear motor, SK0Z/2G-63S/4 2G TF RD, Nord - Ex pressure regulator, V3540000000, Walther-Pilot - Pneumatic controller, ITV2030 34F2N3, SMC - Incl. industrial plug and cable - optional with Defende ...

A compact Walther Trowal vibratory finishing system is available. 1) Walther Trowal ZM 03-FL process water treatment system, Year of manufacture: 2017, Throughput: approx. 1000l/h, Drum capacity: 14l, Acceleration: 2012g, Wastewater tank: 300l, Process water tank: 150l, Compound savings: 90%, Water savings: 98%, Machine dimensions X/Y/Z: approx. 1400mm/1200mm/1750mm, Weight: approx. 600kg, Control system: PLC. 2) Walther Trowal MV 21 vibratory finishing machine, Year of manufacture: 2017, Max. usable capacity: 130l, Ceramic media/plastic media filling capacity: 230kg/150kg, Max. workpiece dimensions diagonal: 570mm, Speed: 3000rpm, Working bowl diameter: 616mm, Working bowl depth: 470mm, Machine dimensions X/Y/Z: approx. 1250mm/1050mm/1200mm, Weight: approx. 900kg, operating hours: approx. 913h. Documentation available. An on-site inspection is possible.

A Walther Trowal mass finishing system is available. 1) Walther Trowal G 100-C vibration dryer, year of manufacture: 2001, usable volume: 70l, max. heating capacity: 3kW, max. workpiece diagonal: 160mm, bowl diameter: 980mm, discharge height range: 730mm-1030mm, feed height range: 765mm-1065mm, top edge of work bowl height range: 885mm-1185mm. 2) Walther Trowal CD 110 circular vibratory finisher, year of manufacture: 2001, gross volume: 110l, usable volume: 73l, max. workpiece diagonal: 160mm, screen area: 1632cm², speed: 1000rpm, max. centrifugal force: 17540N, weight: 450kg. Including various finishing media. Documentation available. An on-site inspection is possible.

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...

This Walter Helitronic Power Grinding machine was manufactured in the year 2004. It is equipped with a WALTER HMC 600 control unit and has 5 axis. The machine has a spindle speed of 7000 rpm.

General SKU430W1390 MakeHermann Waldner Type1450 l. LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1450 l.( 1000l) Vessel sizesDia. 1200x1500 mm Dished bottomcheck ManholeDN500 Top connectionscheck OutletDN50 Max. temperature-20°C/+200°C With jacketcheck MaterialStainless steel 1.4404 (316L) With jacketcheck General No.5064 Year of construction2016 Mounted on legscheck Floorspace1,50x1,30 m Total height2,30 m Weight1400 kg Extra Specifications- mirror polished inside&:nbsp:- pneumatic outlet valve- no lidPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatal ...

This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.

General SKU430W1394 MakeHermann Waldner LocationBarneveld CEcheck Type46 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity46 l.( 20l) Vessel sizesDia. 450x500 mm Dished bottomcheck ManholeDia. 400 mm Top connectionscheck OutletDN40 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1500 rpm Speed mixing shaft45-55 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5069 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,75x0,90 m Total height2,10 m Weight300 kg Extra Specifications- control panel on the reactor (Plug &:amp: Play)- mirror polished insideGeneric ...

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5066 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &:amp: Play)- mirror polished insideGeneric medicinesFine chemicalsBiotechnologyAgrochemica ...

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5065 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &:amp: Play)- mirror polished insideGeneric medicinesFine chemicalsBiotechnologyA ...

General SKU214U093 MakeHermann Waldner TypeHW-17.2 H Machine number5175 Year of construction2016 Pressure Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2300 Ltr. Surface14.4 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface14.4m² Drying chamber capacity2300 Ltr. Drying chamber sizes970x1000x1750 mm Max. temperature-10/120 °C With jacket10 Ltr. Max. temperature-10/180 °C Number of trays34 Distance between the trays35 mm Tray capacity21Ltr. Container sizes530x800x50 mm With 1 doorcheck MaterialStainless steel 1.4539 (904L) With jacketcheck General LocationBarneveld With switchgear(as is) Floorspace1,3x1,65 m Total height2,6 m Weight1600 kg CEcheck ATEX designedcheck Extra SpecificationsThis tray dryer must be heated by steam.Paints & coatingsPowdered  ...

General SKU388X982 LocationBarneveld MakeHermann Waldner Pressure Working pressure jacket2 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Stirring vessel Closed stirring vesselcheck Capacity200 l. Vessel sizesDia. 800x900 mm Dished bottomcheck Dished top sidecheck With coverDN600 Manholecheck Top connectionscheck OutletDN40 with ball valve With jacketvolume 25 l. Max. temperature90°C With propellor stirrercheck Motor1,1 kW, 230/400 volt, 915 rpm, (Ex) Speed mixing shaft915 rpm. MaterialStainless steel 1.4401 (316) With jacketcheck General No.787 Year of construction1984 Mounted on legsand wheels Floorspace0,80x0,80 m Total height2,20 m Weight350 kg Extra SpecificationsWith ball cleaning,&:nbsp:John Crane, thermo syphon vessel, volume 5 l.Oils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, h ...

General SKU202X012 MakeHermann Waldner TypeHw-17.2H No.4327 Machine number4327 Year of construction2010 Main Features MaterialStainless steel Volume2300 Ltr. Max.temp.80 °C Surface14.4 m2 Specified Features - Drying oven Drying ovencheck Max. temperature80°C Number of compartments:1 Capacity2300l Internal width970 mm Internal depth1000 mm Internal height1750 mm Steam heatingcheck Number of doors:1 With fancheck With rack mounted on wheelscheck With trays32pieces, 530x800x50 mm With jacketcheck Drying ovens Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface14.4m² Drying chamber sizes970x1000x1750 mm With jacket:plates: Max. temperature-10/+140°C Distance between the trays35 mm Tray capacity21Ltr. Container sizes530x800x50 mm With 1 doorcheck Specified Features - Drying oven MaterialStainless steel 1.4404 (316 ...

General SKU290S396 MakeHermann Waldner GmbH &: Co (D) Type350 ltr No.929 Year of construction1979 Mounted on legscheck Pressure Working pressure jacket3 Bar Main Features MaterialStainless steel Volume350 Ltr. Specified Features - Vertical tank Open vertical tankcheck Capacity350 ltr Vessel sizesdia. 830x510mm Conical bottomcheck Outletdia. 50mm Max. temperature100 degr. C With jacket(55 ltr) Max. temperature140 degr. C MaterialStainless steel With jacketcheck General LocationBarneveld Floorspace1,2X1,1 M Total height1,2 M Weight300 Kg Extra Specificationswith removable product basket, dimensions dia. approx. 700x450mm (approx. 175 ltr)Oils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsLubricants ...

General SKU430W1389 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity150 l Vessel sizesDia. 700 x 800 mm Dished bottomcheck Top connectionscheck OutletDN25 With jacketcheck Max. temperature200°C With propellor stirrercheck Motor0,37 kW (400 V, 1500 rpm) Speed mixing shaft85 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5067 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,95x0,90 m Total height1,80 m Weight600 kg Extra Specifications- Mirror polished insideGeneric medicinesFine chemicalsBiotechnologyAgrochemicalsFeed additivesFood additivesAnimal feedOther f ...

General SKU060Y349 MakeHermann Waldner GmbH Wangen No.W-3188 Year of construction1994 LocationBarneveld Specified Features - Stirring vessel Material finishPolished inside With jacketcheck Pressure Working pressure1 Bar Working pressure jacket2.5 Bar Main Features MaterialStainless steel Volume568 Ltr. Motor0.88 KW Specified Features - Stirring vessel Closed stirring vessel(1x) Capacity568 Ltr Vessel sizesdia. 800x900mm Dished bottomcheck Dished top sidecheck Manholedia. 250mm Top connections3x dia.35mm + 3x dia.45mm + dia. 60mm Outletdia. 50mm With jacket(60 Ltr) Max. temperature90 Degr. C. With propellor stirrermake Ekato, type EM-040 Motor0,55/0,88 KW, 400 Volt Speed mixing shaft498/975 Rpm MaterialStainless steel 1.4435 (316L) General Floorspace1,6x1,6 M Total height2,4 M Extra Specifications- Equipped with 3 CIP nozzlesOils & fatPaints & coatingsPo ...

General SKU430W1393 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity238 l.( 150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft75-85 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5068 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight700 kg Extra Specifications- mirror polished insideGeneric medicinesFine chemicalsBiotechnologyAgrochemicalsFeed additivesFood additivesAnimal feedOther feedBiopharmaceuticalAPIBioreact ...

This 5-axis WALDRICH COBURG 17-10 FP NC/5 was manufactured in 1985 and lastly retrofitted in 2011. It features a maximum workpiece weight of 60 tons and a substantial table size of 2,500 mm by 5,000 mm. The machine is equipped with a Sinumerik 840 control system, ensuring precision in operations. If you are looking to get high-quality milling capabilities, consider the WALDRICH COBURG 17-10 FP NC/5 gantry milling machine we have for sale. Contact us for further details.

General SKU236W261 LocationBarneveld MakeHermann Waldner Type4750L No.2140 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity4750 Ltr( netto 2000 Ltr) Vessel sizesDia. 1800x2685 mm Conical bottomcheck ManholeDN600 Top connectionsDN50, DN40 OutletDN 100 With jacketJacket room 1, volume 45 Ltr, jacket room 2, volume 105 Ltr. Max. temperature165°C. With anchor stirrerWith scraper With paddle stirrerscrew stirrer Counter rotating stirrercheck Motor4,4 kW, 380 volt / 7,5 kW, 380 volt Speed mixing shaft50 rpm and 30 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General Year of construction1993 Mounted on legscheck With switchgearcheck Floorspace5,0x5,0 m To ...

Walther CN - 550 -PN Mass Grinding Machine and Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550 liter capacity -Motor 3.5 KW -Pneumatic soundproofing cover -Control cabinet -Dirty water / drain device -Compound - Sliding Stones 2xBoxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500Kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of construction 1996 -Rotor speed 3160 rpm -Power 4 KW -Max. throughput capacity 800 / litres / hour -Documentation -Dimensions LxWxH 1.7x1x1.6 meters / Weight 400Kg Hsbkn Aev Dlzpeu S Tol

Offered is a WALTER 5-axis CNC tool grinding machine for the production and resharpening of rotationally symmetrical cutting tools such as drills, milling cutters, reamers and special tools. Travels X/Y/Z: 400mm/250mm/580mm, C-axis swivel range: +/-200°, A axis: 360°, rapid traverse X/Y/Z: max. 15m/min, linear axis resolution: 0.0001mm, center height range: 130mm-165mm, max. workpiece diameter: 190mm, workpiece mounting: ISO 50, spindle motor power: 4.4kW, grinding spindle speed: 6000rpm, spindle diameter: 70mm, max. grinding wheel diameter: 200mm, control: WALTER HMC 400. Overall dimensions X/Y/Z: approx. 1420mm/2010mm/2150mm, weight: approx. 3100kg. An on-site inspection is possible.

Offered for sale is a WaldrichSiegen CNC portal milling machine for horizontal and vertical milling as well as drilling of large workpieces. Table travel: 14000mm, crossrail saddle travel: 4500mm, crossrail travel: 4000mm, quill travel: 450mm, positioning accuracy of table/crossrail saddle/crossrail/quill: 0.05mm, distance between columns: 4545mm, distance from table to spindle: 4000mm, table size/clamping surface X/Y: 14000mm/4350mm, main spindle motor power: 125kW, main spindle tool interface: ISO SK60, max. table load: 200t, max. point load: 10000kg, control: Siemens 840D, measuring systems: Heidenhain, axis drives: Siemens/Dornhoff. Including an angle-adjustable universal milling head, angle milling heads with installation heights of 800mm/850mm/1400mm, a 1400mm work spindle extension, adapter plates for the work spindle with 400mm/220mm and chip conveyors on the left/right below flo ...

General SKU383W1174 MakeHermann Waldner LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume170 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity170 l. Vessel sizesDia. 800x850 mm Dished bottomcheck Top connectionscheck OutletDN30 With jacketcheck Max. temperature150°C With propellor stirrercheck Motor0,55 kW (380 V, 950 rpm (Ex)) Speed mixing shaft0-390 rpm With jacketcheck Stainless Steel Reactors MaterialStainless steel 1.4571 (316Ti) General No.1389 Year of construction1983 Mounted on legsand wheels With switchcheck Floorspace1,00x1,20 m Total height2,40 m Weight500 kg Extra SpecificationsCoating inside, outside off jacket 1.4306Oils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemi ...

This 5-axis WALTER HELITRONIC RAPTOR DIAMOND was manufactured in 2023. It features a tool diameter capacity of Ø3-290 mm, with an optional extension up to Ø400 mm, and a maximum tool length of 270 mm. The machine is designed for the production and regrinding of carbide, HSS, PCD, and CBN tools. If you are looking to get high-quality grinding capabilities, consider the WALTER HELITRONIC RAPTOR DIAMOND cylindrical grinding machine we have for sale. Contact us for further details.

Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960

Stainless steel pressure vessels Double-walled Mobile Technical data: see also pictures : Inner jacket 3 bar Inside about 116 ltr. Outside CA 26 ltr. Operating temperature: inside and outside: 200 ° C

1 piece of plan knife head 210 mm 12 Cutting 1 piece corner corner fraeser WALTER 200 mm, F2010 12 cutting Further: Diverse crankshaft fraeser GFM

Vibrator 4 tubs WALTHER TA.4/72 Internal tub dimensions: L 800 x W 250 x H 300 mm Coating Tubs No 2/3/4: in good condition Coating Tub No 1: used Motor 7,4 kW New electrical panel: starting by electronic variator Concrete base 2 exits at the front Voltage 380 V Dimensions (L x W x H) 2500 x 2100 x 1200 mm Weight approx. 3 T MACHINE IN OUR STOCK IN FRANCE.

Waldys Model: B-188 stretch film wrapper Serial: S26-S252 designed for packaging food products on trays, fruit, veg, meat, fish, cheese, poultry to retain freshness and presentation, min pack dimensions 90mm L x 110mm W x 10mm H, max dimensions 200mm L x 300mm W x 160mm H, width of film 280mm - 550mm2004

Jupiter JU 45 Walter Plant Machines Nr: + # 2055 Number of baking tongs 45 Upper engraving 5 x 5 mm Underengengravings 5 x 5 mm Edge yes Tool 22 ° Gas Propan Location: Germany The machine is used to make sweet, rotated squirrels with or without a rim and is sold with a tool for 22 °. The conveyor belt and stacking table are included. The machine is currently in storage.

Waffle squirrel machine Walterwerk Jupiter JU 72 Price VB Built in 1988 Location Germany Energy supply: - Gas: natural gas - Number of baking plates: 72 - Engraving Outside: 10 x 10 mm - Engraving Inside: 10 x 10 mm - Plate size: 250 x 250 mm Machine consists of: oven, crossband, heart on heart device, packing tape Machine is currently stored.

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Walther Trowal Type: polishing machine TT25-E / grinding machine - finisher year: 1989 Volume ca. 25 Liter Speed: ca. 250 U/min electrical: 400 V / 50 Hz, 1,5kw different: - Tops made from polyurethane - Polishing / ball mill / grinding machine - Fresh water and wastewater connection - The machine is mechanically complete. reconditioned, sandblasted and repainted, see pictures - The PU parts have not been replaced Surface grinding system / grinding system for polishing, rounding, deburring, grinding, cleaning, descaling, oil removal, polishing of stamped, cast, formed, forged and sawed parts or machined workpieces, sensitive parts such as jewelry, steel, plastics etc. or massive large parts. We offer this machine in checked/cleaned/painted” condition, without warran ...

Тype: WALDYSSA AUTOMAC 45 Model: B 223 XL Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: Length: 245,0 сm Width: 170,0 сm Height: 170,0 сm Voltage: 380 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg

Тype: WALDYSSA AUTOMAC 45 Model: B 223 ZR Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: length: 190,0 сm width: 170,0 сm height: 150,0 сm Voltage: 400 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

Hermann Waldner stainless steel mobile vessel, jacketed for heating/cooling, total internal volume 60 litre, total jacket volume 20 litre, permitted internal vessel operating temperature max.150ºC, permitted jacket operating temperature max. 150ºC, permitted operating pressure inside max. 0 bar, permitted operating pressure in jacket max. 3 bar, bottom outlet, mobile on wheels, vessel height approx. 1000 mm, vessel outer diameter approx. 650 mm, vessel inner diameter approx. 500 mm

centre height: 125 mm spindle bore: 27 mm taper in dividing head spindle: MK 4 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Horizontal dividing head WALTER mounted on a SINUS-table WELK. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.

Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!

Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!