wafios ds 50 used for sale

4 UNITS/SETS OF SDM0050 PACKED TOGETHER. A SINGLE SDM0050 CORRESPONDS TO: Professional outside micrometer with a range of 25-50 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 35 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0050 PACKED TOGETHER: 210 x 480 x h35 mm - 4 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-459 ...

Professional outside micrometer with a range of 25-50 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 35 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-199

Machine number: 32099/90 BE Drive power: 8.5 kW Electrical connection: 380 V, 50 Hz for deburring various elongated components Lengths from 200 mm to approx. 900 mm (without guarantee) incl. extraction Auction-ID: A7-46287-168

3 UNITS/SETS OF SDM0030 PACKED TOGETHER. A SINGLE SDM0030 CORRESPONDS TO: Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x SDM0030 PACKED TOGETHER: 745 x 1050 x h145 ...

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-85

The laser marking system is equipped with a safety housing, using high quality components, ideal for marking, engraving and cutting metal products. It has a motorised vertical axis that is easy to use. At work, the fully enclosed fibre laser marking machine will lock the fumes and dust generated by machining inside. Capable of working on a wide range of metals: carbon steel, mild steel, stainless steel, aluminium, copper, magnesium, zinc; on rare metals and alloys such as gold, silver, titanium; and on metal surfaces with special treatments such as anodised aluminium, plated surfaces. It can also mark non-metallic surfaces, for example: plastics such as ABS, PVC, HDPE, PP, PC, PE, rubber and resins. Useful for permanently marking logos, barcodes, QR codes, serial numbers. Occupies a small space and is suitable for marking small objects. Laser power 50W, Laser wavelength 1064 nm, Minimum ...

5 UNITS/SETS OF ATT0018 PACKED TOGETHER. A SINGLE ATT0018 CORRESPONDS TO: Material: 20CrMnTi, Usage: Suitable for grinding, milling, precision machining, double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 200 x 90 x 90 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0018 PACKED TOGETHER: 200 x 450 x h90 mm - 25 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-92

3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-262

Working width 5000mm - Adjustable width cutting blades (computer controlled) - Everything seen and tested in working condition - also remains in place until disassembly so that testing can be done before disassembling the machine. For questions about the machine, please send an email to info@troostwijkvavato.com stating the auction number and lot number. Auction-ID: A3-43519-16516

4 UNITS/SETS OF SDM0050 PACKED TOGETHER. A SINGLE SDM0050 CORRESPONDS TO: Professional outside micrometer with a range of 25-50 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 35 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 4x SDM0050 PACKED TOGETHER: 210 x 480 x h35 mm - 4 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-459 ...

3 UNITS/SETS OF ATT0010 PACKED TOGETHER. A SINGLE ATT0010 CORRESPONDS TO: Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0010 PACKED TOGETHER: 480 x 600 x h180 mm - 96 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-53

Material: 20CrMnTi, Usage: Suitable for grinding, milling, precision machining, double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 200 x 90 x 90 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-188

Sturdy base with ground support surface, hardened and ground shaft. Stainless, anti-reflective chromed reading elements. Black reading scale for easy reading. Micrometric adjustment. The slightly raised edges of the sliding rod prevent the movement of the slide from damaging the graduation. The zero value and the scribing tip are aligned with the footprint of the socket (measuring range from \"0\"). Tracking measurements can thus be directly detected without calculation errors. Scoring point with hard metal coating. Machine condition: unchecked. Approx. Transport dimension: LxWxH 745 x 350 x 145 mm; Approx. Weight: 7kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-278

Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-154

Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-165

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers motorized blinds on two sides controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjus ...

5 UNITS/SETS OF ATT0018 PACKED TOGETHER. A SINGLE ATT0018 CORRESPONDS TO: Material: 20CrMnTi, Usage: Suitable for grinding, milling, precision machining, double use vertical and horizontal V-groove jaw. Hardness: HRC58-62 (50x65 mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 200 x 90 x 90 mm; Approx. Weight: 5kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0018 PACKED TOGETHER: 200 x 450 x h90 mm - 25 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-242

Serial number: A-0448 Load capacity: 500 kg Reel diameter: approx. 1300 mm Auction-ID: A7-46287-148

Professional outside micrometer with a range of 25-50 mm, resolution 0.01 mm. The positive spindle lock holds the anvils in place to ensure accurate measurement registration. High-quality construction combined with easy handling makes this type of analogue micrometer particularly suitable for control operators, workshop technicians, repairers and service personnel. It is supplied in a wooden case for storage and easy transport. Machine condition: unchecked. Approx. Transport dimension: LxWxH 210 x 120 x 35 mm; Approx. Weight: 1kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-325

Pressure 5000 Kg (150x200 mm), Material: cast iron, Jaw width: 150 mm, Jaw height: 50 mm, Maximum opening: 200 mm Machine condition: unchecked. Approx. Transport dimension: LxWxH 480 x 200 x 180 mm; Approx. Weight: 32kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-307

3 UNITS/SETS OF ATT0039 PACKED TOGETHER. A SINGLE ATT0039 CORRESPONDS TO: Magnetic force 40 KGF - permanent. Dense polarity for machining small and thin pieces. High-strength magnet system. Activation and deactivation by hand lever. In the OFF position, a weak reverse shot takes care of facilitating the removal of parts. With longitudinal and transverse stop. Machine condition: unchecked. Approx. Transport dimension: LxWxH 650 x 450 x 185 mm; Approx. Weight: 116kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 3x ATT0039 PACKED TOGETHER: 650 x 1350 x h185 mm - 348 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-129

Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. Auction-ID: A7-45991-148

5 UNITS/SETS OF ATT0014 PACKED TOGETHER. A SINGLE ATT0014 CORRESPONDS TO: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0014 PACKED TOGETHER: 250 x 450 x h90 mm - 15 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-98

Equipped with: towbar air suspension seat, articulated and pivot steering, hydraulic quick coupler, extra hydraulic connections at boom, forks with carriage, excavator bucket, work lights, 2x wheel chocks Auction-ID: A1-40136-41

5 UNITS/SETS OF ATT0014 PACKED TOGETHER. A SINGLE ATT0014 CORRESPONDS TO: Material: 20CrMnTi, Usage: machining, Hardness: HRC 58-62 (50x65mm, h 25 mm) Machine condition: unchecked. Approx. Transport dimension: LxWxH 250 x 90 x 90 mm; Approx. Weight: 3kg The item for sale may not be the one shown in pictures, but will have equal specifications and performance. TOTAL APPROX. DIMENSIONS OF THE LOT WITH 5x ATT0014 PACKED TOGETHER: 250 x 450 x h90 mm - 15 kg. PACKAGING WILL BE PERFORMED DEPENDING ON WEIGHT AND DIMENSION. Auction-ID: A7-45991-204

5000 ANSI Lumens, 1024x768 XGA, 3LCD; Video signal input: DVI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-23

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise  ...

Hatz Diesel Forward -backward Widening plates Electrically strart Vibration plate has been checked and is in good working order Auction-ID: A1-41964-32

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White Auction-ID: A7-46311-32

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-29

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-28

Technical Specifications Height of the tips: 500 mm Center spacing: 6000 mm Maximum turning diameter on bench: 1000 mm Maximum turning diameter on carriage: 310 mm Bar passing: 150 mm Accessories: Rapid feed on carriage ; Fixed steady rest ; Platform Item sold in unverified status Auction-ID: A1-44614-12

5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-18

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-31

Batch of 50 pieces of composite corner profiles for facade cladding. Color black, length 280 cm. Packed per 3 in foil. Risk of minor damage. Auction-ID: A1-40136-369

5000 ANSI lumens, 1,920x1,080 Full HD, DLP; Video signal input: HDMI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Colour: Anthracite Auction-ID: A7-46311-17

5000 ANSI Lumens, 1,920x1,200 WUXGA, DLP; Video signal input: HDMI, VGA; electrical connection: 100-240 V - 50/60 Hz; Color: White; Dimensions box: 59x49x26 cm (L/W/H), total weight: 14 kg Auction-ID: A7-46311-30

9500 ANSI Lumens, 3,840x2,160 4K UHD, DLP; Video signal input: HDMI, SDI, HDBaseT; electrical connection: 100-240 V - 50/60 Hz; Color: Black; Transport crate dimensions: 90x72x47 cm (L/W/H), total weight: 81 kg Auction-ID: A7-46311-9

3M Scotch-Brite ribbon roller refills Weight: 56KG net Auction-ID: A1-46070-293

Unused ; UWM 500 welding manipulator ; MIG/MAG CO2 and TIG ; capacity vertical 500 kg ; horizontal capacity 250 kg ; tiltable up to 135° ; table diameter 550 mm ; rotation speed 0–5 rpm ; 230 V ; foot control ; Machine weight approx. 220 kg Auction-ID: A1-45170-15

General overhauled, new seals etc. Auction-ID: A1-46315-42

SKF - 29496 EM - Solid metal cage barrel bearing Auction-ID: A1-46070-329

Lot Schneider Electric KNX Access RTC glass black MTN6903-6214 (50x) Auction-ID: A1-46070-4

Steel construction - mezzanine, 500kg/m2, approx. 2,000 m2 available - used - : Price from location: now only 79,000 € instead of 130,000 € (net), dismantled, packed and loaded. Particleboard is available for about 60% of the area – but in not so good condition! Manufacturer: Pro Man Type: Mezzanine Year of Make: 2007 Max. stage load: 500kg/m2 Floor height (upper edge of floor covering): 3,462mm Bottom edge beam: 3,230mm Dimensions: 71,000 mm x 28,000 mm. approx. 1,988 sqm OK Platform: 3,462 mm UK Stage: 3,220 mm Flooring 38 mm chipboard 1 pallet transfer station Wheelbase: 4 x 4m Stage covering was partly chipboard (38mm), partly gratings Bottom edge chipboard: white Condition: very good Available: immediately Location: Niedernberg near Aschaffenburg There are additional costs for the buyer: new screws, etc. Accessories (stairs, railings, pallet tr ...

Original LINCK chain conveyor with steel carriers length A-A approx. 6,500 mm

\" Mitutoyo Digital Screw Gauge 25–50 mm – 0.001 mm – IP54 – Type MDC-50J Digital Screw Gauge from the manufacturer Mitutoyo from the MDC series. The gauge covers the range of 25-50 mm and offers a high-resolution reading of 0.001 mm. The version is IP54 protected and therefore suitable for workshop use. The device is housed in the original Mitutoyo plastic case with insert. • Manufacturer: Mitutoyo • Type: MDC-50J / Item No. 293-286 • Measuring range: 25–50 mm • Resolution: 0.001 mm • Degree of protection: IP54 • Version: Digital, metric \" Auction-ID: A7-46417-213

Hydraulic-mechanical 4 wheel cold milling machine for asphalt and concrete, milling drum between the rear wheels, milling width can be reduced by dismantling half shells of 250 mm each, hydromechanical drive, hydraulic steering (front axle as steering axle, front axle as steering axle, front axle as steering axle, hydraulic steering machine) Auction-ID: 04B-721-4

\" Mitutoyo ABSOLUTE Digimatic caliper with digital display. Version with ABS measuring system (no loss of reference when switched on). Condition: Used, good condition. Measuring surfaces clean, rail slightly used with usual signs of use. Display functional (according to visual inspection), no cracks. Item: Digital caliper Manufacturer: Mitutoyo Model / Type: ABSOLUTE Digimatic Code No.: 500-181-20 Measuring range: 0–150 mm Origin: Made in Japan • Measuring range: 0–150 mm • Reading: 0.01 mm • System: ABSOLUTE Digimatic • Functions: On/Off, Zero/ABS • Material: Stainless steel, hardened • Manufacturer: Mitutoyo Corp., Japan \" Auction-ID: A7-46417-151

Column-mounted slewing crane 2,500 kg with electric chain hoist Manufacturer: Mechanik Taucha Fördertechnik GmbH Type: ZSD 2500-6/4,5 Year of construction: 2006 Factory no.: 049/06 Column-mounted slewing crane make Mechanik Taucha with a load capacity of 2,500 kg. The system is equipped with an electric chain hoist from the Demag brand. The stroke is carried out electrically via a Demag electric chain hoist type DKUN 16-1250 with two speeds (fine stroke / fast stroke). The chain hoist moves back and forth electrically on the boom (trolley ride). The swinging movement of the boom is electric. Operation via pendant switch control with emergency stop. System consisting of column, boom, swivel drive and electric chain hoist. Column-mounted slewing crane Boom approx. 5 m Electric chain hoist Demag electric trolley travel Electric slewing mechanism Pendant switch control A test book for t ...

\" Workbench / laboratory bench 1100 × 500 × 750 mm – with 4 drawers – without contents Workbench or laboratory bench in solid design. Robust worktop • Right side with 4 metal drawers • Left side open (legroom / device storage) • Sheet steel body • Powder-coated surface Dimensions (approx.): Width: 1,100 mm Depth: 500 mm Height: 750 mm \" Auction-ID: A7-46417-305