wafios ds 50 used for sale

Hello, we offer you a Erfurt Crank Press, PKZZ 1V 500 Pressing force 500 tons Width between the uprights 2800 x 2800 mm Lifting of the ram 500 mm Adjustment of the ram 500 mm Distance between table and ram 1100 mm Table Sliding Table Table Surface 2800 x 2800 mm Technical information on request.

We offer you a Two-column crank press ERFURT Type. PKZZ1V 500 Pressing force. 500 tons Working area 2810 x 2850 mm Sliding table 2800 x 1500 mm

We offer for sale . Two-column crank press ERFURT PKZZ 1V 500/2800 TS Pressing force 500 tons Working area 2800 x 2850 mm max. tool installation height 1100 mm

CONTROLS   electronic controls OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 200 mm   sheet thickness max.: 4.5 mm   coil weight max.: 0.5 to DECOILER   coil weight max.: 0.5 to   mandrel expansion range from: 250 mm   mandrel expansion range up to: 550 mm LEVELLER UNIT   sheet width max.: 300 mm   sheet width (min): 20 mm   sheet thickness max.: 4 mm   sheet thickness min.: 0.5 mm   material cross section max. (450 N/mm2): 800 mm²   number of leveller rolls: 7   diameter of leveller rolls: 65 mm   number of infeed-/outfeed rolls: 4   diameter of feed rolls: 65 mm   drive power: 1.5 kW   loop controls: yes ELECTRICAL SPECIFICATIONS   mains voltage: 380 V   mains frequency: 50 Hz

x-travel: 800 mm y-travel: 500 mm z-travel: 550 mm Control: Mazatrol Smooth G spindle turning speed - stepless: 15000 U/min spindle motor: 11 kW distance table - lower edge spindle: 150 - 700 mm rapid traverse: 42 m/min table surface area: 1050 x 500 mm workpiece weight max.: 750 kg tool taper: CAT 40 total power requirement: kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: m dimensions of the machine ca.: 3,34 x 2,33 x 2,9 m - CNC control Mazatrol Smooth G - 30-fold tool changer (CAT 40) - NIKKEN 4th Axis -ROBOJOB MA-PAL Robot with Controller & Accessories - Loading & Unloading Pallets - Swarf Conveyor & Swarf Bin. EXOMIST Mist Extractor - Renishaw Tool Setter - Renishaw Probe - Renishaw Receiving Unit - Peripheral Safety Guarding - Selection of Spindle Tooling - Set of Manuals. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC vertical machining center Type: DNM 500 Manufacturer: Doosan Year: 2018 Spindle overhauled in 2023 Control: Siemens Sinumerik 828 D X: 1020 mm Y: 540 mm Z: 510 mm Spindle speed: 10000 rpm Spindle taper: BT 40 Table: 1200 x 540 mm Max table load: 800 kg Tool magazine 32 positions Machine dimensions: 3000 x 2550 x 2740 mm Machine weight: 6500 kg Tool probe Work probe Chip conveyor Tool holders Machine in good condition, under power. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Bausch + Stroebel HV 500 semi-automatic capping machine for screw and aluminium crimped caps on vials, bottles, etc., 1 capping station, with appropriate format parts suitable for a container diameter of 15 to 115 mm and a container height of up to 340 mm, including 1 piece screw head for screw caps 21.5 x 15 mm (diameter x height), 1 piece crimping head for a diameter of approx. 25 mm, 1 piece crimping head for a diameter of approx. 32 mm, electrical connection 3 x 400 V/50 Hz, 0.5 kW, machine dimensions approx. 410 x 800 x 950 mm (LxWxH), machine net weight approx. 150 kg

engine output: 110 kW cubic capacity: 3922 ccm allowable maximum weight: 9,0 T All-wheel drive 4x4 FASSI F 60 loading crane CTS 5038 hook lift / 5 tons Front-mounted winch 2 to AHK tow bar AHK ball head CUMMINS ISBe 150.30 / ISBe 3.9. Common Rail Motor 3922 cm³ 150 PS The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In a ...

Key data: 500 t

Manufacturer: BUCHER-GUYER Model: AEBI 500 Year: 1969 Condition: Used Stock number: 9455 Control system: SIMATIC S 5 (CPUS 115) Compressive force: 500 t Piston diameter: 525 mm Piston rod diameter: 498 mm Stroke length: 412 mm Machine weight: 18000 kg The press underwent a complete overhaul in 1992 (hydraulics and control system). Equipment: Technical documentation Hydraulic power unit Switchgear

Technical data (according to nameplate): Manufacturer: H. Jungheinrich Maschinenfabrik GmbH & Co. KG (Hamburg) Model: ETV A 16 G 95-505 DZ Year of Make: 1988 Serial Number: 799 8811 Nominal load capacity: 1,600 kg (with load centre 600 mm) Net weight (without battery): 2,240 kg Battery voltage/capacity: 24 V / 720 Ah Battery weight: min. 814 kg Device Details & Condition: Mast: Equipped with a triple mast (triplex / DZ) with integrated free lift and thrust function. Battery: Equipped with two BAE battery blocks (BAE Nova trans). Condition: The device is in a used, disassembled/partially opened condition (covers disassembled, electronics and hydraulics partially open).

table length: 780 mm table width: 500 mm ampere: 60 / 120 A Control: Heidenhain total power requirement: 14,0 KVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 3,0 x 2,0 x 2,1 m Sinker EDM machine Control: Heidenhain / Erocom Table: 780 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Single-station machine for containers up to max 8 ltr. Extruder S 90. Single head with viewing strips. Other accessories, such as conveyor belts

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Control unit, control element, interface -Manufacturer: Jungheinrich, control unit from electric forklift ERC 205 / ECE 20 / ESE 320 -Type: 2x PM2402L/2 / 2x PM 2402 L -Mat-No.: 50306778 -Voltage: 24 V -Quantity: 1x control unit available -Price: per piece -Dimensions: 170/135/H70 mm -Weight: 0.8 kg/pc.

Amada HFE M2 5012 Abkantpresse (2021) Hersteller: Amada Typ: HFE M2 5012 Abkantpresse Zustand: gebraucht, unter Strom in Produktion Baujahr: 10/2020 Einschaltstunden 6830h Arbeitsstunden: 417h (wird noch eingesetzt) Presskraft (kN) 500 Pressbalkenlänge (mm) 1270 Durchgang zwischen den Maschinenständern (mm) 1035 1 Hub (mm) 150 Öffnungsweite ohne Stempelhalter (mm) 480 Ausladung (mm) 100 Arbeitshöhe (mm) 920 Arbeitsgeschwindigkeit (mm/sec) 15 Zustellgeschwindigkeit (mm/sec) 185 Öffnungsgeschwindigkeit (mm/sec) 185 Abmessungen: Länge (mm) 2585 Breite (mm) 2190 Höhe (mm) 2420 Gewicht (kg) 3600

Eurotherm Drives DC 590+ SERIES 590P/0035/500/0011/UK/ARM/0/0/0

Control: Manufacture: FANUC 21-M x-travel: 1020 mm y-travel: 510 mm z-travel: 575 mm table-size: 1200 x 500 mm spindle turning speed range: 60-8000 U/min tool magazin:: 24 weight of the machine ca.: 7.5 t HEIDENHAIN TNC-426 Prepared for the 4th axis www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mori Seiki DuraVertikal 5080 3Achs Bearbeitungszentrum (11/2006) Hersteller: Mori Seiki Typ: DuraVertikal 5080 Baujahr: 11/2006 Zustand: gebraucht, gut, in Produktion

Leadwell LTC-50CL CNC Drehmaschine (10/2006) Hersteller: Leadwell Typ: LTC-50CL CNC Drehmaschine Baujahr: 10/2006 Zustand: gebraucht, gut, in Produktion Optional mit Zubehör Weitere Informationen folgen

Height=1.61 m, Overall length= 4 m, Overall width= 0.97 m, Net weight= 1043 kg,

Year: 2009 - technically efficient, ready to work – after full service - disc diameter: 500 mm - max. cutting length: 3000 mm - hydropneumatic feed - vertical and horizontal pneumatic profile mounting

Key data: 500 kN, 25 mm

Stock No.: 503615 Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control: Selogica-direct Year of Make: 2013 Hours: 36163 h Clamping force: 500 kN Min. installation height: 200 mm Max. installation height: 550 mm Plate spacing max.: 302 mm Opening travel: 225 mm Size rotary table D: 900 mm Screw diameter: 25 mm Displacement: 59 cc Spray pressure: 2500 bar Equipment Screen text German Turntable Core pull hydraulic 1x Machine with water battery Machine without material hopper Levelling elements EUROMAP 67 Handling Interface Interface EUROMAP 73 Ejector plate fuse interface Machine dimensions LxWxH: 3m x 1.6m x 3.48m Total weight: 3540 KG

Press force: 16,000 kN Max. ram stroke: 1,700 mm Max. opening between table and ram: approx. 2,450 mm Min. opening: 770 mm Ram plate: 4,500 × 2,500 mm Table size: 4,500 × 2,500 mm Rapid traverse: 350 mm/s Working speed at 66% press force: 23 mm/s Working speed at 100% press force: 13 mm/s Max. return speed: 220 mm/s Max. retraction force: 1,600 kN Ram cushion: Force: 2,000 kN Stroke: 150 mm Pressure plate: 3,650 × 1,580 mm Table cushion: Force: 2 × 1,000 kN or 3 × 500 kN Stroke: 300 mm Pressure plate: 1,550 × 700 mm Drive: Main motors: 2 × 132 kW Motor filter unit: 4 kW Motor speed: 1,500 rpm Suitable for demanding forming, deep drawing, and pressing operations with large tools and high press forces.

Hydraulic press with a pressing force of 5,000 kN or 500 t. Manufacturer: Maschinenfabrik EXNER GmbH & Co. KG Type: EXSBRD 500ET Machine No.: 10461 Year of manufacture: 2001 Max. stroke length: 1,300 mm Max. opening: 1,800 mm Min. opening: 500 mm Table size: 2,550 × 2,000 mm Frame passage: 2,570 mm Tool dimensions: 2,200 × 1,800 mm Max. tool weight: 25,000 kg Working speed: 26 / 50 mm/s Rapid traverse speed: 400 mm/s Overrun distance: 97 mm Overrun time: 158 ms Safety distance: 252 mm Drive power: 159 kW Oil capacity: approx. 2,800 liters

Tip height: 100 mm Center width: 500 mm Grinding wheel diameter: 300 mm Max. speed grinding wheel 2,825 min-1 Rotatable grinding head 90° left and right Max. workpiece speed: 750 min-1 Spindle cone MK 4 Tailstock 3-jaw abrasive chuck 125 mm Face Plate 160 mm Collet chuck ER 40 with collet set 28 pcs. Fixed grain tip Grinding wheel flange with grinding wheel Wet grinding equipment

Key data: 470 A, 550 , 60

Refurbished OPS Ingersoll Gantry 500 Eagle die-sinking EDM machine – technically and visually in top condition The machine has been comprehensively and professionally overhauled in our company and is in very good condition, both technically and visually. In the course of the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully checked and replaced if necessary, including ball rollers and drive spindles. This was followed by a complete geometric measurement, alignment and additional control using a laser measuring system. The machine bed and the entire base were thoroughly cleaned. All pumps were disassembled, cleaned and overhauled. All hoses, including hydraulic and compressed air hoses, were completely replaced. In addition, the machine has been completely repainted and also presents itself visually in a very neat condition.  ...

Complete disassembly Cylindrical grinding machine STUDER RHU 500 – MIRA Retrofit We have a complete exploded view from a STUDER RHU 500 cylindrical grinding machine, ideal for spare parts, repair or maintenance. The machine has been dismantled by MIRA Retrofit, specialists in the reconstruction and modernization of grinding machines, preserving its main assemblies and components for sale as spare parts. Available, among others: - Workpiece holder head and its components. - Tailstock headstock. - Grinding head and grinding assemblies. - Motors and drives. - Spindles and mechanical elements. - Trolleys, guides and moving elements. - Steering wheels, controls and mechanisms. - Hydraulic and pneumatic components. - Electrical elements. - Protections, supports and accessories. - Different original STUDER parts. Sale by individual components or possibil ...

Number of spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. control: Memory-Funktion Weinig Powermat 500 with grooved table ---------------------------------- The machine arrives at the warehouse and is cleaned and fully inspected. Brief Summary: ---------------------------------- - 5 Spindles - 8,000 rpm - Grooved table for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller in the outfeed table, hardened: 210 mm wide - Left and top spindles controlled for width and height - Quick-release spindle nut Detailed Description: ---------------------------------------------------------------------- - Technical Data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st Spindle - bottom ----------------------------------------------- Motor with ...

Technical data: Design: GR90 Volume flow: 15,243 m³/h Negative pressure: 2,608 Pa Motor power: 18.5 kW Motor : 34 A / 19.6 A Rated Voltage: 400V/690V Frequency: 50 Hz Motor: 1,470 rpm Weight: 440 kg Dimensions: 1,645 x 780 x 1,670 mm The sale is carried out on behalf of the owner from his location. The fan is handed over in the same condition as existing, excl. warranty.

Bookbinding press for gluing Muro 4 x 5000 A3/HAD - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Bookbinding press for gluing Muro 4 x 5000 A3/HAD Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Bookbinding press for gluing Muro 4 x 5000 A3/HAD Price: 3600 EUR Download PDF Bookbinding press for gluing Muro 4 x 5000 A3/HAD Solid construction, waterproof board, galvanized elements. Machine in very good condition. Technical data: Format: 525x320x525 (width/depth/height) Number of stations: 4 Power supply 230V Power consumption max 4kW Weight 142kg High pressing  ...

Morey Ø 500 mm Strokelength: 200 mm Table dia: 500 mm Depth of throat : toolholder -- column: 600 mm

Key data: 500 kN

Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request.  ...

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

The machine is a wrapping machine for paper reams, operating principle: electromechanical-pneumatic, max. mechanical speed: 16cycles/min, average format changeover time: approx. 1min, max. roll diameter: 1000mm, core diameter: 150mm, roll width: 600-1600mm, wrapping paper: kraft and poly, wrapping paper grammage: 80-150g/m², roll change time: approx. 3min, processable formats width: 297-1000mm, length: 420-1400mm, max. height: 80mm, min. height with head folding: 25mm, min. height with top folding: 15mm, ream weight: 4-40kg, minimum grammage of paper reams: 60g/m², control: electronic logic control PLC S7/400, connected load: 160kVA, permissible voltage variation: +8%/-5%, control cabinet socket: 220VAC, control cabinet lighting: 220VAC, PLC I/O card inputs and outputs: 24VDC, solenoid valve outputs: 24VDC, supply air pressure: 5bar, air consumption: 700Nl/min, noise level: 80dB(A), wi ...

Hermle C800U X: 800 - Y: 600 - Z:500 mm CNC X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: 800 x 700 mm Admission in spindle (ISO): SK40 Power on the spindle: 23 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of toolholders: 30 tools Number of rotations: 10 0000 rpm Power principal motor : 31 kVa Weight: 9 ton

Hermle C30U X: 650 - Y: 600 - Z: 500 mm CNC X-axis: 650 mm Y-axis: 600 mm Z-axis: 500 mm Table dimensions: Ø 630 mm Admission in spindle (ISO): SK40 Power on the spindle: 26 kW Control : Heidenhain iTNC 530 Number of axes: 5 axis Toolchanger: yes Number of rotations: 18 000 rpm Length: 3500 mm Depth: 2480 mm Height: 2950 mm Weight: 9,5 ton ACCESSORIES: yes

Type: UMC-750 5-assige verticale bewerking X-axis: 762 mm Y-axis: 508 mm Z-axis: 508 mm Table dimensions: Ø 630 mm Admission in spindle (ISO): BT40 Power on the spindle: 22,4 kW Control : Haas Number of axes: 5 axis Toolchanger: yes Number of toolholders: 40 positions Number of rotations: 8100 rpm (122 Nm) Weight: 6 ton

Slijphoek: 40 tot 180 graden 3,6 kW Max dia: Ø 2 > 50 mm Number of rotations grindingwheel: 2880 rpm Weight: 400 kg

Deckel-Maho DMU50 X: 500 - Y: 400 - Z: 400 mm CNC Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 400 mm Power on spindle: 13 kW Admission in boring head (ISO): BT 40 Spindlespeeds: 20 > 9000 rpm Table size: 700 x 500 mm Control: Heidenhain TNC 426 Length: 2700 mm Depth : 2700 mm Height: 2500 mm Weight: 3,5 ton Toolholder: yes Number of tools: 16 positions

Slitting and cut-to-length line Strip width... 1,500 mm Strip thickness 0.5 - 2.0 mm Cutting number... 7 strips Straightening rollers 8 pcs. Coil weight.. 7,000 kg Rewinder .. 7,000 kg

Longitudinal cut-to-length line Strip width 1,500 mm Band thickness. 0.5 - 3.0 mm Number of cuts . 5 pcs. Straightening rollers. 7 pcs. Coil weight.. 7,000 kg Rewinder ... 7,000 kg Facility consists of: -Pressing arm -Unwinder -Belt removal wedge - Straightening machine -Strip scissors -Cross shears -Band brake -Reel -Control panel -Electrical control

Manufacturer: LWB Construction year: 2024 Model: VCRS 500/115 bc Type of machine: Injection moulding machine Technical Details: - Clamping force: 500 kN - Injection volume: 115 cm3 - Machine weight: 3600 kg - Compressed air: 6 bar - Voltage: 400 V / 50 Hz - Electrical power: 46 kW - Operating hours: approximately 6,800 - Extras: Hot runner with two separate heating areas, additional safety walls, automation with plate moving in and out for easier access - Mould not included Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Multiplas Year of manufacture: 2023 Model: V2C-50T Type of machine: Injection Molding Machine Technical Details - Screw diameter: 35 mm - Theoretical injection volume: 154 cm3 - Injection capacity (PVC): 145 gm - Injection pressure: 1383 kg/cm2 - Injection rate: 69 cm3/sec - Plasticizing capacity (PVC): 53 kg/hr - Screw rotation speed: 186 rpm - Heater capacity: 3.9 kw - Clamping force: 55 ton - Min. mold thickness: 350 mm - Opening stroke: 300 mm - Max. opening thickness: 650 mm - Ejector stroke: 90 mm - Ejector power: 1.8 ton - Electric power: 10/7.5 hp/kw - Oil tank capacity: 160 L - Cooling water capacity: 230 l/hr - Machine size (L.W.H.): 2.3 x 1.5 x 3.7 m - Machine weight: 3.4 ton - Operating hours: approximately 420 - Extras: Material hopper included - Mould not included, Find more here - .ucymachines/ Contact us at - sales@ucymachines

Slitting line Stainless Steel Strip width.. 500 mm Belt thickness... .02-3.0 mm Coil weight. 5 to. Speed 150 m/min. Minimum belt width.. 13 mm Strip number 10 Coil I Dia. 400 / 500 mm Shaft diameter.. 145 mm Control... Siemens S 5 Facility consists of: -Coil car -Uncoiler + Snubber roll - Pieler table -Paper Wrapper -Edge controll system -Pinch roll -Scrap shear - PVC coating unit -Side guide 2+2 rolls -Slitting head -Roll table -Scrap winder -Tension unit -Recoiler, separator shaft -Paper wrapper -Turnstile 2 arms -Electrical & Automation system -Camera system

Manufacturer: HYUNDAI KIA Model: VX 500 Year: 2007 Condition: Used Stock number: 9495 Control System: FANUC Series 21i-MB Work table length: 1200 mm Work table width: 500 mm Spindle drive power: 11 kW Maximum vertical spindle speed: 8000 1/min X-axis travel: 1090 mm Y-axis travel: 510 mm Z-axis travel: 635 mm Machine weight: 7000 kg

Krohne Volumetric automated filling machine for filling quantities starting from 50ml up to unlimited quantities, equipped with flow control Krohne Batchflux 5015B/C and Pump NETZSCH NEMO NM021BY04S24B 2008A 160-820RPM, 0,2-1,2m3/h; Nord Engine type SK 01F 90L / TF 4; Sizes: 1420x750x1350mm(height)

Worthington 50WR200 Centrifugal pump two in stock, 15Kw motors, 2940 RPM, 50mm discharge outlet, 3Ph

High voltage induction motor, not used, Power 800 kW, Voltage 690 V, Current 840 A, Rotational speed 1385 rpm, Weight 7340 kg, Protection class IP 55, Cooling IC 416