wafios ds 50 used for sale

General SKU438X1385 MakeYstral Serial266680913 TypeY 18.500 S/GD7-4 TDS Main Features MaterialStainless steel Motor18.5 KW Length1100 mm Specified Features - Stirrer Stirrercheck Shaft length1100 mm Sizes stirring headø 250 mm Motor18,5 kW, 400 V, 2935 rpm Mounted on supportcheck MaterialStainless steel General Year of construction2013 LocationBarneveld Floorspace1.00 x 0,41 m Total height2,10 m CEcheckOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsStirrersDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rub ...

General SKU202X016 LocationBarneveld MakeABL Anlagentechnik/ OFRU TypeASc-500 Pressure Vacuum possiblecheck Main Features MaterialStainless steel Volume510 Ltr. Specified Features - Distillation Distillation installationcheck Capacitybruto 500l, netto 250l Max. temperature170°C With stirrercheck Motorcheck Distillation Capacity510/55l Specified Features - Distillation MaterialStainless steel 1.4301 (304), Stainless steel 1.4404 (316L) General No.020113 Year of construction2013 Year of construction2013 Mounted on framecheck With switchgear( as is) ATEX designedcheck Extra SpecificationsWas used to regenerate(recover) the solvent after filtration step before loading into a tray dryer... in this case acetone were captured in the IBCs ,to reduce the footprint of lost solvents...the recovery system will work with similar solvents as wellOils & fatFine chemicalsOth ...

General SKU300U907 MakeSiemens TypeDiffraktometer D5000 Year of construction1991 LocationBarneveld Floor space1,03x1,03 m Total height1,84 m Weight760 kg Extra SpecificationsThe D5000 can be used to determine the crystal structure of a material through X-ray diffraction. By directing an X-ray beam onto the sample, the D5000 measures the diffraction patterns that arise when the radiation is scattered by the atoms in the crystal lattice. These patterns are analyzed to obtain information about the arrangement of atoms in the crystal lattice.Oils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLu ...

General SKU430W1391 MakeHermann Waldner LocationBarneveld CEcheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity687 l., (500 l.) Vessel sizesDia. 1000x1200 mm Dished bottomcheck ManholeDN350 Top connectionscheck OutletDN25 With jacketcheck With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft95-136 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5065 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace1,30x1,30 m Total height2,40 m Weight1100 kg Extra Specifications- with control panel on reactor (plug &:amp: Play)- mirror polished insideGeneric medicinesFine chemicalsBiotechnologyA ...

General SKU250U362 MakeBepex LocationBarneveld TypeL200/50p Main Features Motor3 KW Inlet diameter310 mm Width50 mm Specified Features - Roll compactor Roll compactorcheck Roll width50 Roll diameter200 Rolls can be heated/cooledcheck Motor3,0kW,220/380 Volt, 1420 rpm Roll speed18-90 Rolls can be adjustedcheck With dosing/compacting screwsStöber, type: R65-3115-300-4, Dia: 50mm, pitch: 40mm With motor0,75kW, 220/380Volt, 2780/3335 rpm With variable speed driveStöber, type: R25-2038-K2-075-2 Speed3,1-15,5 With hoppercheck Hopper sizesDia: 310x280mm InletDia: 310mm MaterialStainless steel 1.4301 (304) General No.10427 Year of construction1987 Mounted on framecheck With switchcheck With switchgear(as is) Floorspace1,6x0,9m Total height1,3m Weight750 kgPowdered foodsStarchSugarAnimal feedConfectionerySolid pharmaceuticsMinerals & inorganicRoll compactorsBep ...

General SKU371T1118 MakeEdwards TypeA38513935 Mach.No.297 Year of constructionunknown Pressure Vacuum possiblecheck Main Features MaterialMild steel Volume400000 Ltr. Motor3.7 KW Specified Features - Vacuum pump Pumpcheck Number of pumps:2 Capacity400m³/h With motor2,2kW, 220-240/380-415 With motor1,5kW, 220-240/380-415 Inlet100 mm Outlet25 mm MaterialMild steel General Mounted on framecheck LocationBarneveld Mounted on wheelscheck With switchcheck With switchgear(as is) Floorspace009x0,55 m Total height1,15 m Weight350 kg Extra Specificationsmachine is a 2-stage vacuum pump.Consisting of:Edwards Mechanical booster model EH 500AEdwards High Vacuum Pump model E2M 80Oils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatal ...

Portable 7-axis coordinate measuring system ROMER Infinite 1.0 SC 5028SC. Measuring range diameter: 2800mm, point repeatability: approx. +/-0.045mm - 0.050mm, volumetric length measurement uncertainty: approx. +/-0.064mm - 0.075mm, wireless communication: Wi-Fi 802.11b/g, battery operation, software base: WinRDS driver compatible with measurement software solutions PolyWorks, PC-DMIS, PowerInspect, Metrolog. Including integrated balancer, transport case, probe set 6mm, 15mm, tip, mounting plate with 3 magnets, calibration bar with calibration certificate. Inspection by appointment possible.

Transnorm conveyor belt GF 820-600-500 RA2471 Technical data: Conveyor length (NL): 820 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 820 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 scope of delivery: w ...

Transnorm conveyor belt GF 1200-600-500 RA2432 Technical data: Conveyor length (NL): 1200 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 330 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0.53 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Getriebemotor KW: 0,55/S1 Conveyor speed m / s: 0,53 scope of delivery: without supports an ...

Transnorm conveyor belt GF 1060-600-500 RA2472 Technical data: Conveyor length (NL): 1060 mm frame width (NB): 600 mm, 800 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 300 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm welded again before sale Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 1999 condition: good (used) Conveying length in mm: 1060 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation KW: 0,37/S1 Conveyor speed m  ...

Cutting height: 125x220 mm machine weight ab.: 450 kg Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working area: 500x300 mm work height max.: 100 mm Weight: 120 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.

Standard equipment: - Closed machine frame with integrated laser unit - Movement unit for high-precision machining - Gantry drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit Riedel NPP from 2003 - TFT color screen - Longitudinal conveyor belt for small parts and waste - Automatic pallet changer - Work area lighting - Position laser diode - Oil spraying device - Piercline - FocusLine - NitroLine - PlasmaLine - CO2 Laser TruFlow 5000 - Maintenance-free turbo centrifugal blower - 250mm lens cutting head

BINOVA WATER RING PELLETIZER, constructed in AISI 304 stainless steel, for HDPE LDPE LLDPE PC PP PS ABS, horizontal type, throughput rate 800-1200 kg/h depending on scraps and feeding rate, Users manuals, drawings, CE., Constructed in 2003, Offered checked and reconditioned, See how we recondition [HERE](.germanplast.eu/pages/what-we-do), availability: 5 weeks time, capacity: 1.500 kg/h, conditions: reconditioned

Spiral bevel gear machine ZFTKK 500/3V. Some of the change gears missing

This 3s DMG Mori Seiki NLX1500MC/500 horizontal turning machine was manufactured in 2014. It features a maximum turning diameter without interference of 366 mm, X-axis travel of 260 mm, and Z-axis travel of 590 mm. With a spindle speed of 6,000 rpm and a turret with 12 driven stations, consider the opportunity to buy this DMG Mori Seiki NLX1500MC/500 horizontal turning machine. Contact us for further details.

General SKU061H261 MakeHeraeus Hanau TypeVTR-5036 No.9004800 Year of construction1990 LocationBarneveld Main Features MaterialAluminium Volume45 Ltr. Max.temp.180 °C Specified Features - Drying oven Vacuum drying oven(1x) Max. temperature180 Degr. C. Number of compartments:1 Capacity45 Ltr Internal diameter340mm Internal depth500mm Electric heatingcheck Electric capacity1,1 KW, 230 Volt Number of doors:1 MaterialAluminium General With switchcheck Floorspace0,6x0,7 M Total height0,5 MConsumer wastePaints & coatingsPowdered foodsGeneric medicinesDrying ovensTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarDairyAnimal feedOther feedConfectionerySolid pharmaceuticsDyes & pigm ...

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

General SKU234S120 MakeBühler Cobra 501 TypeSRK 440 No.10310050 Year of construction1999 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/690 Volt MaterialStainless steel General With switchcheck Floorspace2,1x1,5 M Total height2,9 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > ConfectioneryIndu ...

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

General SKU253S172 MakeBühler AG (CH) TypeCobra 201, SKR 440 No.10194572 Year of construction1990 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 volt MaterialStainless steel General Floorspace2,1x1,1 M Total height2,7 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > ConfectioneryIndustries >  ...

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This 5 axis TRUMPF TruBend 5085 was manufactured in 2012. It features a press force of 850 kN and a bending length of 2,210 mm, making it suitable for various bending applications. With an operating interface of Touchpoint TruBend, it offers user-friendly operation. Consider the opportunity to buy this TRUMPF TruBend 5085 press brake. Contact us for further details.

General SKU356S840 LocationBarneveld MakeENCO Energie Componenten GmbH (AT) Type509 ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialStainless steel Volume509 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Notified body(Tuv) Capacity509 l Vessel sizesdia.800 x 900mm Dished bottomcheck Top connections(3x)DN50, DN80, DN100, DN125, DN200 OutletDN50 Max. temperature160°C With propellor stirrer:Semix 040: Motor0,5 KW, 400Volt (EEX e II T3) Speed mixing shaft690 rpm MaterialStainless steel 1.4571 (316Ti) General No.8317/2 Year of construction1996 Mounted on legscheck Floorspace1,1x1,1 M Total height2,5 M Weight600 KgPressure vesselsGeneric medicinesFine chemicalsOther chemicalBiotechnologyRubberPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPIEncoTanks > Pressure vesselsIndustri ...

This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine.

General SKU201T021 LocationBarneveld MakeUmformtechnik Hausach GmbH Type500 ltr IBC with stirrer Pressure Working pressure0.2 Bar Main Features MaterialStainless steel Volume500 Ltr. Pressure0.2 Bar Specified Features - Vertical tank Closed vertical tankcheck Capacity600 ltr (nett 500 ltr) Vessel sizes900x1080 mm With covercheck Conical bottomcheck Manholedia. 40 mm Top connectionsdia. 45 mm (3x) Outletdia. 52 mm With propellor stirrercheck Motor0,55 kW 220/380 Volt MaterialStainless steel 1.4301 (304) General No.105588 Year of construction1993 Floorspace1,1x0,9 m Total height1,5 m Weight150 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsVertical tanksDetergent & surf.Other pharmaceuticsCosmeticsLubricants & oleoDairyAnimal feedOther  ...

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

General SKUR0379 MakeAlpine Ultraplex LocationBarneveld Type500 UP beater plate Main Features Motor30 KW Inlet diameter450 mm Width150 mm Specified Features - Fine Impact Mill Grindercheck Grinding room sizedia. 450x150mm Inlet170x100mm Motor30 kW 380/660 Volt Speed4500 rpm With jacketcheck Fine Impact Mills MaterialMild steel General No.162166 Year of construction1981 Floorspace1,1x0,9 M Total height1,1 M Weight720 KgConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlastic & rubberFine Impact MillsMinerals & inorganicAlpineIndustries > Recycling > Consumer wasteIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdere ...

max. format 51 x 33 cm Year of construction 2012 Stacking delivery Palamides Alpha 500 Double benefit Automatic format recognition Waste Rejection Vibrating device Pressing station Roller table Delivery date: immediately from stock Price on request. Worldwide Delivery & Installation

General SKU345S771 LocationBarneveld MakeGEA Westfalia Separator Industry GmbH TypeTA 40-01-506 No.1685-547 Main Features MaterialStainless steel Capacity6000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Motor11 KW, 380/420 Volt InletDN25 Liquid outletDN25, DN25 Mounted on stainl. steel framecheck MaterialIncoloy 825, Stainless steel 1.4539 (904L) General Year of construction1985/2001 Mounted on mild steel framecheck Floorspace1,4 x 1,2 m Total height1,5 m Weight820 kgOils & fatGeneric medicinesBiotechnologyFeed additivesCosmeticsSeparatorsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIWestfaliaIndustries > Food & Feed > Oils & fatIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > CosmeticsCentrif ...

General SKU241S145 MakeBühler Cobra 501 TypeSRK 440 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 380/660 Volt MaterialStainless steel General No.10208705 Year of construction1992 Floorspace2,2x1,6 M Total height2,7 M Weight2600 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > ConfectioneryIndustries > Chemical  ...

General SKU234S124 MakeBühler Cobra 501 TypeSRK 440 No.10.164.371 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm MaterialStainless steel General Floorspace2,3x1,3 M Total height2,9 M Weight2600 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & pigmentsIndustries > Ch ...

General SKU234S116 MakeBühler RWK 501 TypeSRK-440 No.10226398 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia 35mm Outletdia. 35m Motor55 kW 380 Volt MaterialStainless steel General Floorspace2,4x1,3 M Total height2,7 M Weight2650 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > ConfectioneryIndustries > Chemical > Dyes & pigmentsIndustries > Chem ...

General SKU345S815 MakeR&:M Tycon Technoglass Spa LocationBarneveld CEcheck Pressure Working pressure3.5 Bar Vacuum possiblecheck Main Features MaterialGlass Volume576 Ltr. Pressure3.5 Bar Vacuumcheck Specified Features - Pressure vessel Notified body(TuV) Capacity500 Ltr (576 Ltr) Vessel sizesdia.1000 x646mm Dished topcheck Dished bottomcheck With covercheck Top connectionsDN100, DN80 OutletDN50 Max. temperature-30/200 degr.C. MaterialGlass - Enamel General No.10887 Year of construction2004 Mounted on legscheck Floorspace1,5x1,5 m Total height1,2 M Weight750 KGPressure vesselsGeneric medicinesFine chemicalsOther chemicalBiotechnologyRubberPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnimal feedAPITycon ItalyTanks > Pressure vesselsIndustries > Pharmaceutical > Generic medicinesIndustries > Chemical > Fine chemicalsIndustries > Chemical  ...

General SKUR1133 MakePaul Schwingel GmbH (D) Type500 ltr LocationBarneveld Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume500 Ltr. Motor6.8 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity550 ltr (nett 500 ltr) Vessel sizesdia. 800x1100mm Dished bottomcheck Flat top sidecheck With cover700x240mm With jacket(150 ltr) Max. temperature200 degr. C With anchor stirrercheck With paddle stirrercheck Motor6,8 kW 220/380 volt (Ex) Speed mixing shaft62 rpm MaterialStainless steel 1.4571 (316Ti) With jacketcheck General No.963340 Year of construction1997 Mounted on legscheck Floorspace1,3x1,2 M Total height3,3 M Weight900 Kg ATEX designedcheckOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRub ...

General SKU234S123 MakeBühler AG TypeRWK Cobra 501/SRK-440 LocationBarneveld Main Features MaterialStainless steel Motor55 KW Specified Features - Sand mill Vertical sandmillcheck Housing dimensions dia. 320x900mm Inletdia. 35mm Outletdia. 35mm Motor55 kW 400/690 Volt MaterialStainless steel General No.10257153 Year of construction1995 With switchgear(as is) Floorspace2,3x1,2 M Total height2,9 M Weight2850 KgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarSand millsConfectioneryDyes & pigmentsMinerals & inorganicBühlerIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarMills > Sand millsIndustries > Food & Feed > Conf ...

centre distance: 2.500 mm centre height: 250 mm grinding wheel diameter: 600 mm Total travel of the grinding support: 320 mm spindle speeds: 50 - 450 mm tool adaptor: MK5 tail stock: MK Cylindrical Grinding Machine | NAXOS-UNION - W-500 the cylindrical grinding machine was overhauled in 2017 by KPS-Schleiftechnik (RETROFIT – see order confirmation). The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: W-500-2500 | W500 | W 500 | W 500 2500 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE CORE TURBINE CENTRAX 501 KB5 I don't have any more information since the factory has closed LOADED NOW IN FRANCE GOOD PRICE

Allgaier vibrating sieve, Sieve diameter:: 490 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Elec:: 380/400 V , Dimensions (mm): 1100x700 H 1100, Powder discharge height (mm): 815, Electric:: 380/400V , Powder outlet height (mm): 815

Allgaier vibrating sieve, Sieve diameter:: 470 mm, Number of sieves:: 1, Mesh size:: 1,2 mm, Elec:: 230/400 V , Engine: Motor Elektror , Dimensions (mm): 1100x700 H 1200, Powder discharge height (mm): 765, Electric:: 230/400 V , Powder outlet height (mm): 765

50-liter BCD mixing tank with Huber temperature control (0 to 65°C), With agitation, lifting the lid, tank lighting, 4 vents. 1 CIP ball, All documentation is in English (including the FAT), 1 tank of their 1 temperature regulation system Huber are available., Volume: 57 litres, Useful volume: 50 litres, Metal of the tank: 316L, Pressure +: ATM, Metal tank: 316L, Pressure -: -6,5 ATM, Elec: 400V 50Hz , Tank metal: 316L, Agitation type: Small blades / from the top, Stirring speed variation: Yes, Engine: ABB, Engine power: 0,25kW, Cover diameter: 450mm, Tank bottom outlet: Yes / 25mm , Event: Yes, Mobile tank: Yes, Double envelope: Yes, Metal of the double envelope: 304L, Double envelope volume: 10 liters, Double envelope pressure: + 6,5 , Double envelope fluid: Gas Group 2, Dimensions (mm): 600 x 1250 mm H2000mm, Weight (kg): 438 / 505 kg, Set temperature: 0-150°C , Double envelope meta ...

General SKU224T201 MakeJorns No.31959/1 Year of construction1983 Mounted on legscheck Main Features MaterialStainless steel Volume5000 Ltr. Specified Features - Stirring vessel Horizontal tankcheck Capacity5000 Ltr. Sizes1420x1560x2620 mm Dished frontscheck Manholedia. 400 mm Top connectionsDN 65, DN 40 OutletDN 65 Max. temperature50 °C With propellor stirrercheck Motor2,6/7 kW 380 Volt Speed mixing shaft470/950 rpm. Stirring vessels MaterialStainless steel General LocationBarneveld Floorspace1,5x2,7 m Total height2,2 m Weight600 kgOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersStirring vesselsCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOth ...

General SKU334N528 LocationBarneveld MakeHenschel TypeHU-500 Main Features MaterialAluminium/Stainless steel Volume500 Ltr. Motor15 KW Specified Features - Universal mixer Universal mixercheck Capacity500 Ltr Vessel sizesdia.900mm x650mm With cover:manual operated: Pneumatic operated outlet300x200mm With motor15,0 KW, 380 Volt Rotor speed134 rpm General Mach.No.821197 Year of construction1976 Mounted on framecheck Floorspace2,4x1,8 M Total height3,0 M Weight1100 KGPaints & coatingsPowdered foodsGeneric medicinesUniversal mixersCatalysts & fillersDetergent & surf.CosmeticsFood additivesLubricants & oleoConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHenschelIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Generic medicinesMixers > Universal mixersIndustries > ...

A CNC 3D coordinate measuring machine Keyence is available. Table diameter: 500mm, measuring diameter: 500mm, measuring height: 200mm, travel X/Y: 280mm, rotation capability: 360°, tilt angle: 45°, max. table load: 50kg, display resolution: 0.1µm, repeatability: 2µm, measuring accuracy: +/-10µm. Machine dimensions X/Y/Z: approx. 720mm/1000mm/860mm, weight: approx. 30kg. Documentation available. An on-site inspection is possible.

TRUMPF TruLaser 5030 fiber laser was built in 2010 in Germany by TRUMPF Maschinen Grüsch AG. The machine, which is designed for precision cutting of thin and medium-thick sheet metal, is used, among others, in the automotive or aerospace industry. Thanks to its high efficiency, the TruLaser 5030 is ideal for both prototyping and mass production. Workpieces are machined by means of a stable 3 kW fibre-optic beam, which is generated by a laser source of the highest energy efficiency. Fibre optic technology increases machining speed and efficiency while minimising material loss at the same time. All this is complemented by an advanced CNC controller with all the necessary functions. The TRUMPF TruLaser 5030 L41 fibre laser weighs 12000 kg. Technical specifications of the TRUMPF TruLaser 5030 laser cutting machine - CNC control: TRUMPF - laser power: 3 kW (3000 W) - feed in the X/Y/Z  ...

Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...

This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details.

Certus Steam Boiler & Water Tank Type: Junior 500 CVE Manufacture Year: 2012 Please see photos for further specification and information. For more information and more available stock please visit us at - advancedbrewing.co.uk