wafios ds 50 used for sale

Directly from the manufacturer, the original from Apfel GmbH. Fully assembled included 2 shelves KRB 4700 1 storage box KEN 6422 (No. 62) 2 storage bins KEN 4322 (No. 42) 1 zinc sheet trash can 2 brooms 1 hand brush 1 dustpan 1 set of shadowboards 1 compartment for cleaning products 4 swivel castors with parking brake Payload: 400 kg Dimensions: 512 w x 1,952 h x 772 d Structure powder-coated in black-grey RAL 7021 (carcass) Various designs and special solutions possible, we as a manufacturer support you in your wishes! (See pictures 3+4)

Brand: RENZ Model: inline 60-500cm format Maximum speed: 2200 punching cycles per hour and 1700 binding cycles per hour Dimensions: 5900x2400 cm with hinge Gross weight: 3400 kg supplied with 2 modules: RENZ ASM500 and RENZ ABL500 lit up during the inventory.

Industrial floor cleaner Wetrok, wet cleaning and vaccuming system. Charger and battery in good condition included. Extra new repromaterials included.(new brushes) Can ship worldwide.

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 500, Recent Electric retrofit The machine is in our warehouse in Gussago BS, under power M i m u machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

; Power [PS]: 170; Gross weight [kg]: 8250; Engine: Battery System: LIFePO4; Accessories: Battery, Stahldach

Fuse protection: 100A, control voltage: 220V, operating voltage: 380V, connected load: 30,4kW, weight: 14,4t, with four-jaw chuck (diameter: 900mm), tailstock, quill, three steady rests and control system. An on-site inspection is possible.

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Bread slicer/continuous machine/industrial version/creel machine Disc thickness 12mm possible product size width max 520 mm, height 140mm with lubrication with inlet belt Output approx. 30 loaves/min with material pusher

Dematic roller conveyor right with straight section 1000-90°-500-440 IR795 RA2356 Make: Dematic Direction of rotation: 90° right-running Roller width (RB): 440 mm conical, plastic coating Nominal/outer width (NB): 500 mm Inner radius (IR): 795 mm Length of straight section: 1000 mm Frame height: 132 mm Overall height including motor: 275 mm Conveying speed: 0.33 m/s Drive type: Round belt Electrical details: Motor type: SEW geared motor Motor power: kW 0.25 380V Optional: Supports Side guides Frequency converter for stepless speed control convertion to left Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 500 Roll width in mm: 440 angle: 90° Driven: YES scope of delivery: without supports and side guides For ind ...

Diesel Fuel Tank 4.500 Liter, 4.500 Liter Tank, UL142 Certified

faceplate diameter: 500 mm total power requirement: 1 kW weight of the machine ca.: 1 t dimensions of the machine ca.: 1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tea biscuit cutter / pastry harp Dedy Year of manufacture not known Made entirely of stainless steel or aluminium, Dimensions: approx. 42 cm width, 50 cm depth and 10 cm height

x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm Control: Heidenhain TNC 310 tool taper: SK 40 speeds: 20-4500 U/min weight of the machine ca.: 3 t dimensions of the machine ca.: 2,15 x 2,00 x 2,50 m Equipment/accessories: -swivel rotary table -documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 50 mm

50mm Extruder Manufacturer: Rutil Screw diam. 50mm LD ratio 15:1 Max speed (50 Hz) 70rpm

FOLDING MACHINE MBO T 500 4-F -Max paper size 52 x72 cms. -Year 2003, only one onwer -Rollers in excellent conditions -Flat pile feeder -Four combi folding pockets -MC Control FW1 -Anti noise hoods protections -Sheet delivery MBO SA 52 -All manuals, tools and accessories -Available in March

GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...

Lift table work table HANEU Make HANEU Transporte Solingen Type HAT 500 Machine No. 235423 Year of manufacture 1996 Load capacity 500 kg Platform size 1150 mm x 610 mm Lifting height 700 mm Video test run

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. format 49 x 65 cm Year of construction 2000 Flat pile feeder with suction head 4 fold pockets in the parallel fold section 1 folding blade in the cross-fold section 1 more fold pocket after the 1st cross break Shed display Price on request. We supply and install worldwide.

sheet width: - plate thickness: - plate length: - The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Favretto 500, Rotary table surface grinding machine, horizontal spindle, dia 500mm, electric elettrico with DRO

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

Key data: 730 mm, 730 mm, 740 mm

Mazak HC Nexus 5000-ll CNC Horizontal Machining Center CNC Control Mazatrol Matrix Pallet table size 500 x 500 mm Number of pallets 2 Table load 700 KG Travel X-Y-Z axes 730x 730x740 mm Table Indexing 0.001° Spindle taper DIN 69871A-40 Spindle speed 18,000 1/min Spindle motor 35-26 kW Mazgazin capacity 80 If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail.

Specifications Cutting width: 4.5 x 40-80 mm Year of Make: 1994 Power connection: 400 V / 7.5 kW Price: on request the safety level DIN 66399: P3 DIN 66399-1 Machine is fully functional after technical supervision. The PREMIUM paint renovation - 470 EUR additional payment If you have any questions, please call us: +48 696 072 985

Transnorm conveyor belt GF 13750-600-500 RA2061 Technical data: Conveyor length (NL): 13750 mm frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Contact us and we will try to meet your preferred conveying speed. Drive: SEW gear motor, R40 DT80N4 Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 13750 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodrive Zent ...

Manufacturer: Syntegon Model: AFG 5026 Year of Manufacture: 2019 Type of Machine: Filling and Sealing Machine for Vials with Powder Condition: Not used Key Features: - Zoning concept for infeed, filling, outfeed, and drive area - Best accessibility and simplified cleaning procedure - Innovative transport system for continuous and intermittent operations - Vertically rotating mechanism - High output, even with 100% IPC (In-Process Control) - Ideal for wall installation - Optimized Design: - Vertical wall design for best operability - One-side operability for streamlined workflow - Suitable for integration with barrier systems - In-wall installation for space efficiency Find more here - .ucymachines/ Contact us at - sales@ucymachines

Stock number: 3944 Suction Manufacturer: 3NINE LINA, Type: 500 Oilmist Separator Machines NO.: OLIETAAGE UDSUGER, Specifications: Fence effect 500 m3/hour m/3 Engine power 0.55 Kw Cleaning oil mist (cutting fluid/coolant) Min. / max Grad 5-50 degree C. Height: 840 mm, Width: Dia. 480 mm, Weight: 30 kg

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 mm   sheet thickness min.: 2 mm   number of leveller rolls: 9   diameter of leveller rolls: 56 mm   diameter of feed rolls: 150 mm   feed velocity min.: 1 m/min   feed velocity max.: 20 m/min CUT-TO LENGTH SHEAR   sheet width max.: 530 mm    ...

CONTROLS   PLC SIEMENS S5 115 U OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 350 mm   sheet thickness max.: 8 mm   coil weight max.: 4 to   feed velocity max.: 10 m/min   feedstock transport direction: left to right DECOILER   design: single reel   sheet width max.: 350 mm   coil weight max.: 4 to   max. diameter of coil: 1500 mm   mandrel expansion range from: 370 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 10 m/min LEVELLER UNIT   sheet width max.: 350 mm   sheet thickness max.: 8 mm   number of leveller rolls: 21   diameter of leveller rolls: 50 mm   number of infeed-/outfeed rolls: 2   diameter of feed rolls: 120 mm   feed velocity max.: 10 m/min ELECTRICAL SPECIFICATIONS   total power consumption: 38 kW   mains voltage: 380 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   total weight approx.: 13000 k ...

Qty. 1 Second-hand sandwich panel production line Line manufacturing of insulated metal panels for sectional doors (garage). Mfc.: METECNO Technology SPA; FASPAR Built: 1994 Reconditioned and commissioning: 2006 Useful working width: 500/610 - 10 mm Panel door thickness: 40 mm Sheet thickness: 0.37/0.70 mm Capacity: 1,500,000 m panels/year

Working hours laser on: 57785 (23.03.2022) h Working hours beam on: 40160 (23.03.2022) h Laser power: 5000 Watt Control: Siemens 840 D Working range laser: 3000 x 1500 x 115 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 11100 mm Width: 4600 mm Height: 2400 mm Machine weight: 12000 kg Electrical connected load: 105 kVA

Transnorm conveyor belt GF 2200-600-500 RA2388 Technical data: Make: Transnorm Conveyor length (NL): 2200 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,3-1,2 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2200 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,3-1,2 scope of delivery ...

Decoiler Coil weight: 5 ton Material width: 80 - 500 mm Coil exterior diameter: 1800 mm Expansion range: 508 mm Speed: 50 m / min Leveller / Straightener Material width : 50 - 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 65 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 150 mm Material thickness: 1 - 8 mm Feeding speed: 50 m / min Feeding length: 0,1 - 9999,9 mm

Stock# U2443-4 Used stainless steel jet stream mixer by Ystral Gmbh (DE) type Y12.500L.LL/LDT-4DA GMP. Agitator is directly driven by el motor 12.5 / 3.5 kW, 1465/725 rpm, 400 V, 50 hz. Shaft has working length 1100 mm. Cage has internal diameter 245 mm. Three blade propeller has diameter 200 mm.

Transnorm conveyor belt GF 2250-600-500 RA2389 Technical data: Make: Transnorm Conveyor length (NL): 2250 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Support feet: optionally available Conveyor speed (v m/s): 0,15-0,80 Drive: SEW geared motor, with Movi-Mot Frequency inverter for stepless speed change Electrical data: 50Hz V380-500, kW 0.37 S1 Drive pulley: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Lateral guide on one and both sides Adjustable length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2008 condition: good (used) Conveying length in mm: 2250 Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Movi-Mot KW: 0,37/S1 Conveyor speed m / s: 0,15-0,80 scope of deli ...

Semmelmühle Flour Machine Friction machine Fomko Model: 500 Output hour/ 300 kg Stainless Steel Funnel Connection 400V, 1.5 kW, 16A-CEE plug Dimensions: 550 x 550 x 1100mm, WxDxH Used machine cleaned and checked 3 Months Warranty + Spare Parts Service Option: coarse sieve Delivery Service Package Instruction & Commissioning We have more bakery machines in stock!

Manufacturer: IMA Steckprofileindrückmaschine, Type: Nowimat/I/G80/500, Year: 2001, Control: Ima, Work piece width min-max mm: ca.60, Min.-max. workpiece length in mm: 2500, Min.-max. workpiece height in mm: 10-45, Min-max feed m/min: ca.20, automatischer Einzug: yes, Premilling: 4 X 2,2 kw, Coil magazine: 2 Stück Stegprofil, Mitre stations: yes, radius milling: Eindrückstation Profil, Work piece refeeding: yes, Hover cussion table: yes, Hover cussion table: yes, Year :2001

Manufacturer: Bargstedt Aufstapelanlage, Type: TBH 500 , Year: 2005, Control: Bargstedt, Program: yes, Stacking device: yes, Work piece length max mm: 3000, Work piece length min mm: 280, Work piece width min-max mm: 250-1200, Min.-max. workpiece height in mm: 12-60, Stack height in mm: 1600, Number of stacks: 2, Workpiece weight/stack position in kg: 60, Outlet roller conveyor mm: yes, Cycles approx.: 15, Year :2005

Manufacturer: Bargstedt Abstapelanlage, Type: TSH 500/Q/30/12S, Year: 2005, Control: Homag, Work piece width min-max mm: 1200, Min.-max. workpiece length in mm: 280-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stacking pattern, single-row: yes, Stacking pattern, double-row: yes, Number of stacks: 2, Stack height in mm: 1600, Removal of protective boards: yes, Erection in a pit: no, Year :2005

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

Micrometer screw, outside micrometer screw, precision micrometer screw -Manufacturer: KS, Micrometer: Precision micrometer screw -Measuring range: 500-600 mm -Reading: 0.01 mm -Locking device -Standard: TGL 150 46 -other sizes: also available -Dimensions box: 880/545/H50 mm -Weight: 6.2 kg

ALLSHENG Nano-500 UV-Vis Fluorometer / Spectrophotometer (Micro Volume and Cuvette) New equipment in its original packaging Year of Manufacture: 2023 Model: Nano-500B Light Source: Blue LED Excitation wavelength: 460 ± 20 nm Emission wavelength: 525–570 nm (45 nm) Minimum sample volume: 0.5 μL – 2 μL (2 μL recommended) Optical path length: 0.05 mm, 0.2 mm or 1 mm Light Source / Lifespan: Xenon Flash Lamp Detector type: 2048-element silicon linear CCD array Wavelength Range: 200 – 800 nm UV-Vis Wavelength accuracy: ±1 nm Spectral resolution: ≤3 nm (FWHM at Hg 253.7 nm) Absorbance accuracy: 0.003 Abs (1 mm light path) Absorbance accuracy: ±1% (7.332 Abs, at 260 nm) Absorbance range: 0.04 – 300 (at 260 nm, 10 mm equivalent) Detectable concentration range: 2 ng/μL – 15,000 ng/μL double-stranded DNA (dsDNA) Detection time: < 6 seconds OD600: Absorb ...

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: MBusch, Type: MB LA 500, Year: ca.1997, Working widht mm: 600, Working hight mm: 80, Workstations: 4, Glue jets: 4, Schlitz und Zapfenbeleimung: yes, Pneumatical work piece clamping: yes, Fusspedal Takt: yes, Wasseranschluss zum reinigen: yes, Leimpumpe: yes, Movable: yes, Automatical glue supply: yes, Compressed air bar: 6, Year :ca.1997