wafios ds 50 used for sale

Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

Emulsion mixer Volume : 500 ltr. Material : areas in contact with the product in stainless steel;

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

; Power [PS]: 136; Gross weight [kg]: 13000; Accessories: Tanker, Battery, Control Panel, Stahldach, Input: AC socket: 3P/5W, 1x500kW - DC socket: 3x50kW - AC socket: 3P, 1x60kW, Output: AC socket: 3P/5W, 1x500kW; Water Tank Volume [l]: 800

process, chiller, chiller, air-cooled, Type: TAEevo Tech 502 P3- 105 kW Refrigeration Machines, MTA S.p.A. TAEevo Tech 502P3 are air-cooled compact water chillers suitable for outdoor installation (-5°C to +46°C). Cold water temperatures adjustable from -10°C to +30°C. Including crank pan heating, phase monitoring, buffer tank 500 ltr. and built-in P3 circulation pump. chiller, chiller; Radiator Cooling capacity kW 105 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 17.9 Available pump pressure (bar) 3.42 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3, Max. power consumption (kW) 55.09 Max. current (A) 93.06 Starting Current Circuit (A) 191.65 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1748 Connection Rp 2 1/2" Serial  ...

BOWL CUTTER, TVALL TYPE: CRI-50AC Technical description: Serial number: 9.089.403 Speeds: 2 Bowl capacity: 50 Lt Power supply: 380-440V/50-60 Hz Dimensions: 1300 x 1000 x 1350 mm

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Inlet opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor blades: 6 x 3 With base frame Feed opening: approx. 500 x 1000 mm Rotor width: approx. 1000 mm Rotor diameter: approx. 500 mm Stator knives: 3 Rotor knives: 6 x 3 With base frame

Very well maintained shrink tunnel , 400 V, 13 KW

Offer 23035 Technical data approx.: - Pressure capacity 30 t. - max. sheet thickness 10 mm - max. punching diameter 105 mm - Punching performance - e.g. Sheet steel : 105 mm in 1.5 mm ; 45 mm in 5 mm - e.g. VA sheet metal : 90 mm in 1.5 mm ; 45 mm in 4 mm - Stroke 7 - 70 mm - Projection 560 mm - Maximum stroke rate 120 h/min - Single stroke / continuous stroke - Drive 400 V / 4 kW - Space requirement approx. W 8000 x H 1850 x D 1700 mm - Weight approx. 1900 kg - with: - Notice table with stops - Foot switch; - Emergency stop button - Punch quick-change device - various receptacles, punches and matrices

Shuffle-mix 500 mixer / aerator Serial: 500-115 2007, Stainless mixer aerator, 500L, mobile frame, 3Ph

2 Sibre SBH 500/1250/60 Retail sale possible

Arburg April 2014 model 920H 5000-4600 500 ton Can be inspected and seen in production

Line SEW Eurodrive NF 085-503 Part No. 08274150 No.0009405 UN : 3x380V IN: 85 C° Connections 35 mm2

; Gross weight [kg]: 4830; Engine: Cummins 6ZTAA13-G4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

Kaiser Press 50to -Exhibition machine / zero operating hours -Electro-hydraulic drive -Actuation: foot pedals and push buttons on the control panel -Compressive force max.: 50 tons -Power consumption: 0.75 kW -Voltage: 230 V -Frame width: 930 mm -Maximum frame width incl. hand crank and electrical unit: 1300 mm -Total height: 1900 mm -Cylinder stroke: 145 mm plus 60 mm lead screw -Usable width – working area inside: max. 750 mm -Usable height – working range: 0 mm to 780 mm -Depth of the frame: 220 mm -Total depth with foot: 535 mm (attachment to the ground possible) -Support depth of the height-adjustable work table (cross beam): 245 mm -Cross beam adjustable in 6 positions (hole spacing: 140 mm) -Height adjustment of the cross beam via hand crank (no manual lifting necessary) -Hydraulic unit can be moved laterally: 300 mm (ball bearing in the upper guide area)  ...

Man Roland R 504 OB - PLV (4/0 – 2/2) Year: 2007 Impressions: 205 million Premium speed: 18,000 sheets/hour Sheet size: 530 x 740 mm Stock thickness: 0.06 – 0.6 mm Roland Deltamatic dampening system Technotrans combi cooling unit for ink and water Combi Control PPL power plate loading Automatic ink, blanket, and impression cylinder washing device Premium inking system Premium Quick Format Change ColorPilot D densitometry ink measuring and control device integrated into the control desk Measuring head track for strip measurement at the sheet gripper edge or sheet tail edge Quick-change coater with chamber doctor blade system Extended delivery IR dryer Roland Seccomatic Books and manuals included 2 PCS. anilox rollers included

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Iveco FPT Engine: C87 TE1PV/Stage 3A Engine No.: in production Power: 259 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: S 4 L1D D41 Gene. No.: C221374934 Generator power: 310 KVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation IG 500 Switch: Generator switch 4 poles with motor drive Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Scania Engine: DC 13 072 A 02 14 ECU Engine No.: in production Power: 440 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm:  ...

The scope of delivery includes: 01x idler, second choice Application: for roller conveyors Material color: sendzimir galvanized Material: Steel Type designation: MRT-50x1,5.20 Total length: 625 mm Web width: 595 mm Roll Ø: 50 mm Thread: smooth with spring pressure Weight / pcs.: approx. 1,370 kg Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

table diameter: 690 mm table load: 500 / 250 Kg turning speeds: 0,5 - 3,2 U/min Torque: Drehen 1200 Nm spindle bore: 100 mm swivelling range: 0 - 90 Grad tilt adjustment: manually/mechanicall: maschinell : Kippen 1500 Nm welding current: 500 Ampere connected load frequency: 230 Volt Welding turntable with hollow shaft 500kg capacity With through hole rotation and tilt axis Infinitely variable speed Compact model Incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 23168 Specifications: - Notching options + mitres in 3 levels - right-angled, single-sided + two-sided + three-sided oblique. - Can be used as a slate-cutting cut-off saw - Pneumatic profile clamping machining with semi-automatic sawing units - Saw blade dimensions - vertical 500 x 3.5 x 40 mm positive - horizontal 500 x 3.5 x 40 mm negative - Notching width / notching height at 90° 300 / 285 mm - vertical saw blade 60° - 90° - 25° mot. Positioning with digital display - Swivel range saw blade horiz. With the vert. Saw blade - 45° - 90° - 45°, motorized positioning with digital displays - Notching height adjustment with digital displays - Profile stop shoulder manually swivel 30° - 90° - 45° - pneumatic coolant spraying device - Air connection 6 bar - Drive 400 V / 2 x 3 kW - Space requirement approx. W 2400 x H 2000 / D 1400 mm - We ...

Heating cabinet Manufacturer: Memmert Type: UM 500 Properties: Electric heating, max. temperature: 220°C Electrical power: 2000 watts, at 230 volts - 50 Hz

Machine type: Pulse arc inverter welding machine Make: Rehm Type Megapuls 500 Attachment no. 228.434 Connection voltage 3 x 400 volts Setting range 10 – 500 amps Duty cycle 45 % d.c. at 500 amps 60% d.c. at 450 amps 100% d.c. at 350 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner water-cooled Design of mobile industrial plant with separate DV case and 1.6 mtr. long VB cable Wire feeder 4-roller drive Fuse 32 amps Dimensions L x W x H 1,030 x 600 x 1,300 mm Weight 175 kg Special accessories for filter attachment and wheels on the DV box Age approx. 10 years Condition: workshop-tested, good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauge ...

Stainless steel tank, upright with 500 litre volume, operating temperature 20°C, operating pressure 16 bar,

Year: 2004 - technically efficient, ready to work - after full service - contour milling machine (rounded corners)

Sumbel Herald 500; good condition; cleaned and tested; Working width 500mm; suitable for hot or cold glue. Sumbel Herald 500; good condition; cleaned and checked; working width 500mm; used for hot or cold glue.

Daniels 500ton Upstroking Press Platen 1050mm wide x 1100mm deep Capacity in Tons: 500 Working pressure Lbs: 2950 Daylight between tables: 24"/30" Daylight between platens: 18"/24" Stroke (main ram): 24" Main ram dia. : 22" Side ram dia. : 3 1/2" / 2" 4 columns Return Ram Steam heated platens New light guarding Fast / slow close Complete with pump unit and brand new control panel

Dimensions (L/W/H): 1950x690x1700 mm Weight: 451 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 400 , 500 , 400

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Penta Engine: TAD 1641 GE Engine No.: in production Power: 430 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 C Gene. No.: in production Generator power: 500 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 800 Dimensions of the power unit: Width approx. mm: 1.600 Height approx. mm: 2.460 ...

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

Shredder HSM FA 500.3 - the paint renovation Specifications Cutting width: 10.5x40-76mm Productivity: approx. 600-650 sheets (DIN A4, 70g/m²) Cutting speed: 210mm/s Power supply: 400 V / 7.5 kW Year of construction: 2014 Price: on request the security level: P-2, O-2, T-2, E-2

Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke release via foot switch Assortment of tools is included in the price

Technical data of the Favretto TU 500 Grinding: Max grindable length: 5000 mm Max grindable width: 1500 mm Max grindable height: 1300 mm Passage between uprights: 1530 mm Load capacity: 4500 kg Approximate weight: 20000 kg Voltage: 380 V Approximate installed power: 60 kW Grindstone: Normal dimensions: 500x203 mm Thickness: 100 mm Rotation speed: 1400 rpm/1' Steerky transverse feeds: 1 to 10 mm/stroke Transverse displacements adjustable continuously: from 0.1 to 6 m/1' Table: Useful dimensions of the support surface: 1200x5000 mm Continuously adjustable speed: from 2 to 30 m/1'

Fat baking plant, Fabr.Reimelt, type EL 8/5000 8 rows, Lstg. approx. 5,000 Berliners/h

Salamander stove with strong top heat, electric

Baking tray cleaning machine, Fabr. JEROS, Type 5010 - 15

Angle welding machine with conveyor belt, mobileFabr. Covimac, Dinky 5040 S model

THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) M. No.: 403 Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Ven ...