136,488 used machines on RESALE, but how to find them? Machine Search
Stock number: D1170, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Wagon, Size: L 520 x W 510 x H 1660 mm, Legs: 4 pcs. legs with wheels, Shelves: 2 pcs.
Stock number: D1079, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Wagon, Size: L 1300 x W 650 x H 335 mm, Wheels: 4 pcs.
Stock number: D747, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese washing machine, Standing: On legs with wheels, Motor: 0,37 kW - with beltdrive, Brush width: 350 mm
Stock number: D567, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Cheese washing machine, Standing: On legs with wheels, Brush width: 410 mm, Other: Excl. renovation
Stock number: P207, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Dosing pump, Motor: 0,18 kW - 2655 rpm. - EE x II, Manufacturer: Watson-Marlow, Type: 5003U, Other: Magnetic drive pump head with Teflon gears
Stock number: P305, In stock: Yes, Amount in stock: 1 pc., Item: Hose pump, Motor: Max 360 rpm., Manufacturer: Watson Marlow, Type: 701 P/R, Other: Pneumatic
Stock number: PT1526, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Lobe pump head, Connections: Ø 1½, Theoretical capacity: 0,18 l/rev., Manufacturer: Waukesha, Type: IMC 440, Other: Overpressure valve - Horizontal flow
70 litre, Stock number: T2235, Litre: 70, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Waterbath, Standing: On leg stand, Top: Open, Inner diameter: Ø 550 mm, Total height: H 970 mm, Other: Detachable rings on top
VIBRATING SCREEN - best solution for liquids and powders, Dynamic three-dimensional vibrations., The vibratory motion of the screen spans both horizontal and vertical directions, providing the flexibility of adjustment in both axes., Minimal installation requirements., No vibration transmission from the upper section to the base, Possible addition of wheels to the base., Quick disassembly for cleaning or mesh replacement., Each screen supports the installation of 1 to 4 separation stages, yielding 2 to 5 distinct product fractions., Constructed in carbon steel or stainless steel., All parts in contact with material are on AISI 304 stainless steel Fully compliant with CE regulations most required screen diameter from 400 mm up to 2.200 mm to cover all needs, self cleaning system,, Just ask for your own vibrating screen by listing the following specs:, - material, - process, - size of good ...
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done through a draining auger from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed (and throughput rate) can be adjustable to change throughput rate 500 to 1.000 kg/h, by adding an inverter, Low water consumption (depending on contamination), The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- round-type) (available separately), This machine is to be electrically connected to an ...
for sale is a MIG -MAG welding machine from Ess Schweißtechnik Bad Waldsee, HV 8534, Subject to prior sale, changes and errors!
incl. bed bench and decoration Auction-ID: A1-50823-141
Auction-ID: A1-50060-28
QUICK WASHER for RIGID and SOFT PLASTICS, made in AISI304 stainless steel, low water consumption, can be used with hot water or mild detergents, for reground LDPE LLDPE HDPE film, rigid PE PP PVC PET PA ABS PS PC, 7,5 kw motor 400V 50/60Hz, inner auger 400 mm diam., length 3.000 mm., material and water are loaded from the bottom, material discharging is done from top, bearings are positioned outside the wet chamber, seals on the lower bearing to exclude any contact with water, auger speed is adjustable to change throughput rate 500 to 1.000 kg/h, throughput rate can be adjusted according to contamination and material, Low water consumption (depending on contamination) About 60 lt., The water can be mechanically filtered with a [water screening system](.germanplast.eu/listings/5003567-germanplast-vibrating-screen- for-water-powder-granule) (available separately) to be reused in the proces ...
Offer 25221 Specifications: - Load capacity 2000 kg - Projection approx. 3000 mm - Swivel radius approx. 180 ° - 2 lifting speeds approx. 3.0 + 0.75 m/min - Hackenweg approx. 3000 mm - Operation of the chain hoist via hand remote switch - Manual swivelling of the boom + trolley movement - Boom IPE 300 - Overall height with swivel arm carrier approx. 1220 mm - Connection 400 V - Weight approx. 500 kg - Test book
Inside dimensions bins is 800x1210x780 Auction-ID: A1-40984-133
Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / Mech.Output 18.000 Ex/h (depending on type, size and properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge / Control: micro-processor based control unit with adjustment ...
Inside dimensions bins is 800x1210x780 Auction-ID: A1-40984-134
Manufacturer: Cascade Model: 11000 Probe Station Five (5) Manipulators: - 1× MH-2 with magnetic base - 4× Vacuum-base manipulators: - MH-0307-52 - MH-2 - MH-7267-46 - MH-0307-14 Three (3) Pico-Probe Power Supplies: - Two fully functional - One for parts or repair Four (4) Pico Probes Assorted DC Probe Tips – Variety of tip styles included for different probing needs. TMC Micro-G Table (Model 63-511) – Precision vibration isolation table for enhanced measurement stability. NOTE: It is fully functional but Has error messages that will not clear during warm-up or Irradiation, several restarts required get through warm-up and function. The Manufacturer has determined the issue to be 1 of 2 PCB/module that are under $100 for both. Find more here - .ucymachines/ Contact us at - sales@ucymachines
Inside dimensions bins is 800x1210x780 Auction-ID: A1-40984-136
Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern
A used Zetner Multiline W250 car wash is being sold. Specification: See attached datasheet
Inside dimensions bins is 800x1210x780 Auction-ID: A1-40984-137
Auction-ID: A1-50873-279
Spray cleaning system with basket rotation Batch dimension: 400600280 You can find more systems on our homepage under Used systems
Auction-ID: A1-50873-272
maximum number of results exceeded
please refine your search
60 € 
