wa used for sale

Glycol cooler, water cooler, water evaporator, Küba SGB 132, 70 liter capacity, two fans 710mm diameter, 920 red/min. 2.2 Kw. From a Fruit Warehouse, CA Warehouse In very good condition and fully functional. Fan very robust, south electric, 2.2Kw.

V22 - used approx. 30 m³ / 30,000 litre V4A stainless steel tank, horizontal tank on pedestals. technical details: capacity: approx. 30 m³ / 30,000 litres material: stainless steel, probably V4A, we can have this tested upon request dimensions: approx. L total 6.50 m / L tank 6.00 m × Ø 2.50 m / H total 3.00 m Used stainless steel tank, professionally cleaned and in good condition. Horizontal storage tank on 2 fixed, welded stainless steel bases, lid on the top of the tank (68 cm) and on the side, several inlets and outlets. On the flanges it reads V4A 1.4571, see picture. This stainless steel tank can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, manure, potato steam trays, leachate, rapeseed oil or as a rainwater collection tank, etc.. Pictures from the inside to follow. Unfortunately there is no type label. Price upo ...

We offer: 1 used rear wall grille Dimensions: approx. 2,700 x 850 mm There are 15 pieces in stock 21698 Harsefeld Per piece € 80,00 net plus 19 % VAT ex stock 21698 Harsefeld. Price only valid while stocks last. Subject to changes and errors. We are a professional provider – invoice with VAT shown.

P409 - used approx. 25 m³ / 25,000 litres HDPE tank, plastic tank, double-walled, flat bottom tank. technical details: capacity: approx. 25 m³ / 25,000 litres material: HDPE tank, plastic tank manufacturer: Formoplast specific weight: min. 1.55 kg/L dimensions: approx. Ø 3.49 m × H total 4.50 m test mark: PA-VI 321.103, DIBT and media list available, AHL/ASL listed Miscellaneous: Used HDPE tank in good condition, cleaned inside, uncleaned on the outside. Above-ground storage tank for outdoor use, standing on a flat floor, double-walled, lid on top of the roof, several inlets and outlets. Only the tank itself is being sold, without attachments such as pipes, fittings and accessories. This container can be used as a storage tank for many different media. Former tank for 40% ironIIIChloride, DIBT and media list available. Sulfuric acid tank, hydrochloric acid tank, bleach ...

Inv. Num. : 7383 Type: AquaCut 3001.20WB Producer: MicroStep Created: 2016 Parameters: Control System: iMSNC Duty cycle: 35712 h Hours: 20646 h Work table length: 3000 mm Work table width: 2000 mm Equipment: Cutting head Drilling spindle

STM MasterCut WaterJet manufactured in 2017 in Austria, is an extremely powerful machine designed for machining a wide variety of workpieces. The innovative jet cutting technology used in the process, combined with high-end components, enables incredible cutting quality and precision. The easily accessible, almost indestructible design with a large working area additionally maintains a high degree of stability, even under the heaviest loads. The STM WS3020 water cutting machine has a comprehensive range of equipment, including CAD/CAM software with the very useful AUTO NESTING function, a 37 kW high-pressure pump and a water treatment unit. During its use, the machine has worked for just 800 h and has been serviced on an ongoing basis. Technical specifications of the STM MasterCut water cutting machine - work area (L x W): 3000 x 2000 mm - maximum feed speed: 15 m/min - Z axis r ...

Standpipe valve 1 1/2 for washbasins -Bowl depth: 150 mm -Water level: 120 mm -Quantity: 15x available -Price: per piece -Weight: 0.3 kg

Millipore Milli-Q CLX 7040 (LC) Water Purification System ZAFS51040 Catalog Number: ZAFS51040 Provides up to 800 L/day of clinical laboratory reagent water. Dispensing Flow 15 MΩ-cm, at 25 °C H × L system × depth: 125.5 cm (48.8 inches) × 54.3 cm (21.4 inches) × 79.7 cm (31.4 inches) Tank volume: 90 L, integrated Total Oxidizable Carbon Residue (TOC):

GeneralMulti-Axis Machine; Control: Control F31iB with CELOS CharacteristicsMax machining diameter320 mmMax. Turning Length300 mmSpeed max.6000 rpmSpindle speed 2nd Spindle max.6000 rpmMovements X / Z210/810 mmWeight approx.8000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pGuide bushGuide Bushing If the bar material diameter is smaller than the spindle diameter, place an duracon bushing inside the spindle to prevent vibrations. (including the guide spacer) The customer should machine the guide bushing to the required diameter asLeft Spindle) KITAGAWA 8in. Hollow Chuck B208A521B (SK-OP)(Left Spindle) KITAGAWA 8in. Hollow Chuck B208A521B Three-jaw hydraulic chuck ...

A water mixing and dosing device from the Scheurer company from 2022 will be offered. The device is used, but in very good condition. Technical data: Manufacturer: Johannes Scheurer GmbH Description: Water mixing and dosing device Series/ Model: CENTRALINA/ DOSAMIXA Year of Make: 2022 Volts: 230 Frequency: 50 The device is currently at our customer's site in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, we sell them without guarantee or warranty as well as the right to take back. The offers are subject to change, subject to errors and subject to any prior sale. Our terms and conditions also apply to every sale, ...

Recon Part Number: 0400 6472 12 cylinders Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list.

We sell here a water pump for M.A.N. 2842 with the part number: 51.06500.6598. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales team with decades of professional experience is at your side with advice and support. This also includes maintenance E40, E50, E60 and even an E70 for MWM engines. These maintenance can be carried out on site, except for one E70. Our mobile response team is active nationally and internationally. They bring the necessary tools and know-how with them. Draw on over 25 years of professional experience. With our modern engi ...

Bottle washing machine GERA type: Arcade year of manufacturing: 2010 working hours: 32767 capacity: approx. 33.000 bph by 1,0 ltr. bottles control range: 13.200 - 36.300 bph cell pitch: 110 mm bottle cells per row: 30 bottle cells complete: 7.860 with pre-soaking The machine is still in production in Germany and will be available in February 2025

Dry air dryer Granulate dryer for drying and heating hygroscopic granules. Capacity 600 l. Heating capacity 4.5 kW. Optionally available with dehumidifier AZO LE 600 P.

UK Power Generators is selling Waste Heat Recovery Unit. We are leading supplier of Industrial Equipment for Power Plants and accessories. Contact us today if you are interested in the above listed product. Please see attached the pictures for the units available for sale. Kindly advise your interest if you would like to get further details feel free to contact us back. For arranging the visit inspection; and pricing information feel free to contact us at: Enquiries@ukpowergeneratorsltd.com 00447956518924

Granule dryer for heating and drying hygroscopic plastic granules. Tank capacity 1200 l. Heating capacity 9 kW. Optionally available with air dryer AZO LE 400 K

ID3280 Gravel washing plant / Kies-Waschanlage year/Year of construction 1987 Skid mobile, washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand screw and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 tons/h, Plant has been running until the end. Skid mobile washing plant AT GmbH, type Roberg, washing screen unit size 1100 x 3000 mm, with sand auger and sludge decanter, fractions 16/32 4/8 0/4, capacity approx. 40-60 to/h, system has been running until the end.

9482023 Hot Water Boiler Plant Schmid 2400 kWth with moving step-grate This Schmid boiler features a durable, electronically controlled, water-cooled moving grate, designed to burn a wide range of fuels from wood pellets to wood chips and waste wood. Installed in 2012, the plant operated on wood pellets until December 2022. It is a complete system in good condition, housed in a concrete-element building, with two large pellet silos and a hot water accumulator tank for heat load balancing. These auxiliary components are optionally available to interested buyers. The boiler is equipped with load-controlled primary and secondary combustion air fans, as well as a speed-controlled exhaust gas fan, ensuring high combustion efficiency and low electrical power consumption. The two-stage combustion design minimizes NOx emissions. Its robust triple-layered ceramic and steel combustion ...

Recon Part Number: 555 200 08 01 Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, submersible pump -Manufacturer: Brinkmann Pumps, coolant pump from Matsuura MC 710V milling machine -Type: TB13/110-B6X -Power: 0.4 kW -Flow rate: 12 l/min -Dimensions: see photos -Dimensions: 175/155/H330 mm -Weight: 8 kg

IBS mobile water tanks provide large additional water capacity, which is especially important on construction sites and locations that are difficult to access or do not have their own water source. The tanks are designed for quick and easy lifting onto a truck using a hook-lift system, transport to the nearest water source, fast filling, return to the site, and easy unloading. Each tank is equipped with a high-capacity pump that enables fast filling and emptying of the tank. The pump can also be used for rapid filling of the tank from larger reservoirs or other available water sources. It is sufficient to connect the pump to the water source using the hose supplied as part of the tank equipment. In addition to standard models, tanks can also be manufactured according to special customer requirements. In such cases, the customer defines the tank dimensions and pump capacity accordin ...

Inclined elevator SA 400 with RM 75 USED 10038241 / 147300000G M0009906E/07/00007 Subject to prior sale!

We offer a Doka Framax 270 wall formwork 260.15m² complete with accessories on request. New value of the formwork 188407,00€ Special net price 58545,00€ Accessories 14756,00€ New value approx. 31880,00€ The formwork was cleaned and checked. Partly new formlining. Original Doka rental warehouse quality Item No. Description 3 588103500 Framax Xlife element 2.40x2.70m 36 588100500 Framax Xlife element 1.35x2.70m 10 588122500 Framax Xlife-Uni-Element 0.90x2.70m 3 588122500 Framax Xlife-Uni-Element 0.90x2.70m 7 588102500 Framax Xlife element 0.90x2.70m 6 588104500 Framax Xlife element 0.60x2.70m 8 588105500 Framax Xlife element 0.55x2.70m 5 588106500 Framax Xlife element 0.45x2.70m 16 588108500 Framax Xlife Element 0.30x2.70m 1 588108500 Framax Xlife element 0.30x2.70m 12 588130500 Framax Xlife inner corner 2.70m 12 588126000 Framax outer corner 2.70m On ...

KSB ETANORM D225 standard water pump, Q 150 m3/h, H 102 m, v1.0 mm2/s, Siemens 3

1 wood chip hot water combined heat and power plant with steam turbine Part B Manufacturer: Schmid AG, CH Eschlikon Year of construction 2006 Type: UTSR-3200 Fabr. Item No.: 56103927 Boiler class: CAT 4 Ab. Operating pressure 38 bar Nominal heat output 2100 kW Water capacity: 20,500 l El. Connection: 150 amps El. Consumption; 100 kW The Schmid wood firing system with forest wood chips or residual wood from the wood-processing industry works fully automatically with the following sections a.) Fuel storage b.) Wood chips discharge and transport for incineration c.) Combustion via a firing grate d.) Heat exchange with water e.) Exhaust gas purification and ash removal by a multicyclone and centrifugal force system and exhaust fan f.) Fireplace system g.) Automatic ash discharge via piebald transport h.) Control cabinet system Important control data: ...

New repair kit for a Volvo Penta TMD 122A cooling water pump List price of the package 650,-€ consisting of the following parts: 1 Piece Repair Kit 8767628 1 piece gasket 862596 1 piece gasket 422171 1 piece gasket 423351 3 pcs hexagon screw 955542 10 pcs hexagon screw 955536 1 piece plug 968146 2 pieces of V-belts 966959

Water Pump for MTU 396 Engine Part Number: 5582000501

Chiller, cooling water circuit, heat exchanger, cooling for spot welding equipment, spot welding machine, spot welding system, spot welding gun, cooling unit -Manufacturer: Deltatherm, Deltatherm -Type: DE-HI -Power: 1.7 kW -Individual components: see photos -Dimensions: 1300/800/H1760 mm -Weight: 321 kg

Washcloth changing stand OMS WM 1050; cleaned and tested; Working width 1050mm; 230V. Cloth changer OMS WM 1050; cleaned and checked; working width 1050mm; 230V.

Bench scale, running weight scale, 0 to 6000 g

High throughput tray washing system, designed to accommodate a total of up to 1500 crates per hour, split over two conveyorised lanes.

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 15 kW 980 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 1140/470/H505 mm -Weight: 331 kg

Cooling water pump, centrifugal pump, water pump, coolant pump, drilling water pump, wastewater pump -Dirty water pump: for coarse grit -Drive: 11 kW 1470 rpm -Max. flow rate: m³/h -Max. delivery head: m -Dimensions: 940/400/H425 mm -Weight: 169 kg

capacity 250 Kg

Distillation plant for WFI water or pure steam generation Manufacturer: DEWA Type DP 30 EVS Distillation or pure steam plant this system can be used to produce either distillate or pure steam. Production 30 litres/h Feed water consumption 35 l/h Cooling water consumption system at 95 °C Destwasser 200 l/h electric heating capacity 18 kW max. operating pressure 1.9 bar min. cooling water pressure 1.0 bar min. feed water pressure 1.0 bar min. pressure for control air 6.0 bar Total capacity evaporator approx. 27 litres Evaporator capacity at max. level approx. 11 litres Dimensions: Height 2240 mm Width 970 mm Depth 700 mm Empty weight 300 kg

Reflective light barrier, light barrier, reflective light switch, reflective switch, light switch, reflective light barrier, reflective light switch, one-way light barrier -Manufacturer: ifm, efector200 photoelectric sensor one-way light barrier transmitter, unused -Type: OG5116 -Cardboard dimensions: 95/65/H30 mm -Weight: 0.1 kg

A horizontal Malnati glass washing and drying machine is available. Nominal working width: 800mm, glass thickness range: 2mm-8mm, min. glass dimensions X/Y: 100mm/100mm, min. glass sheet spacing: 50mm, feed speed: 3.5m/min, washing brushes: 4. Machine dimensions X/Y/Z: approx. 2400mm/1350mm/1300mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible.

ThyssenKruppHPD 4037-OEM20214000 bar3.8 l/min19 mm37 kW1980 kgused, low operating hours per seller

Offered are 2 identical Heuft rack ovens. Permissible operating overpressure: 2bar, test pressure: 5bar, volume: 156dm³/8.1dm³, max. permissible temperature: 300°C, heat transfer medium: Heuft HE 21, baking levels: 10. The oven is designed to accommodate two rack trolleys. An on-site inspection is possible.

Water pump with external coupling, without motor Type: VACST-L020107DIIG

Chiller Make: SYSTEMAIR Type: SYSCROLL 170 AIR EVO PH Power: 170 kW – cooling and heating Electrical. Power: 77 kW/150A Refrigerant: R410A Weight: 1,385 kg Year of Make: 2014 4 pcs compressor Make: Copeland Scroll Type: ZP182KCE-TFD-455 Volume: 35.1 m³/h Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

ROLL WASCH Slitting line for wastewater Sludge centrifuge Model No.: RFC-20 400 V

Stainless steel, round steel, warehouse liquidation, 1.4104, X14CrMoS17, D150x1057mm, , new -50% Special price This stainless steel comes from a stock liquidation of a certified production company, so we offer an absolute special price. We have other diameters with this quality in stock. Buy a larger quantity we will still accommodate you in price. D 150mm x 1057mm lg, 147 kg, peeled. Material: X14CrMoS17 Material number: 1.4104 Condition: peeled The material was analysed using a hand-held spectrometer and is available from us. Material certificate is not available. A heat-treatable, martensitic, stainless free-cutting steel with 17 % chromium and molybdenum addition, which is alloyed with sulphur to improve machinability. The higher sulphur content reduces corrosion resistance and toughness. Not for cold forming and joint welding. 6 month warranty according to our gen ...

Water Jet Pump Resato PJE-2-4000 Here there is a gebr. Water jet pump that has been standing around unused for over 10 years. The pump costs with an additional pressure converter and an additional control from a cannibalized pump 7,000,-- €. There are also about 100 HD seals. If you want to buy the print translators solo, they cost 1,500 €/piece There is no guarantee, warranty and to avoid misunderstandings the pump must be inspected before collection.

MWM 232 / 234 Water Pump MWM Part Numbers: 6.232.0.731.0010 ; 623207310010

Rail cars, shunting cars Previous use: Timber warehouse Approx. 25 pcs. Dimensions 400x 150 and 350 x 150 cm

Manufacturer: Hobart Type: Washing machine Model: UPT 10 Capacity: 130 liters Universal dishwasher: 120 sec 240 sec 280 sec Height: 2417 mm Width: 945 mm Length: 1435 mm Voltage: 400V 50Hz 3N Power: 24.5 kW 39.4 A Sertifikat: IP X4 Main material: Stainlees Steel

P427 - used approx. 30 m³ / 30,000 litre HDPE tank, plastic tank, double-walled, flat-bottom tank. Technical details: Content: approx. 30 m³ / 30,000 litres Material: HDPE tank, plastic tank Manufacturer: Formoplast Specific gravity: min. 1.55 kg/L Dimensions: approx. Ø 3.49 m × H total approx. 5.50 m Certification mark: PA-VI 321.103, AHL/ASL listed Other: Used HDPE tank in good condition, inside professionally cleaned, from the outside as shown in the pictures. Above-ground storage tank for outdoor installation, standing on flat floor, double-walled with outer tub, dome on top of the roof, several inlets and outlets, opaque, incl. railing on top of the roof. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. If the ladder fits on the truck, it can be supplied. This container can be used as a storage tank for many different media ...