wa used for sale

Key data: 600 mm, 400 mm, 90 mm

Electro-Permanent Magnet Clamping Plate Type 1150V-40/60-14

SOLD New Wartsila W20V32 Crankshaft For Sale, Unused Also suitable for Wartsila 20V34SG engines 2 units in stock In New unused condition, from a surplus engines Other engine parts available

SOLD New Wartsila 20V34SG Crankshaft For Sale Unused Also suitable for Wartsila W20V32 engines 2 units in stock In New unused condition, from a surplus engines Other engine and power plant equipment available.

roll diameter: 660/700 mm roll length: 2100/1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-Roll L-Calender - Line - second-hand 4-roll Buzuluk L-calender 700x1800 Mixing mill Buzuluk 660x2100 Complete 4-roll L-calender line. The line was used for the production of transparent PVC. However, the basic machines can also be used for rubber. The most important machines in the line: Pos. 8: Liquid mixer make Trusionma hot and cold Pos. 10: KO Kneader make BUSS Item 12: Buzuluk 660x2100 mixing roller mill Item 14: 4-roll L-calender make Buzuluk 700x1800 Items 15-19: Tempering and basin equipment behind the calender Roller conveyor Item 20: Layer thickness profile measuring device Item 23: Rewinding device The system was used for transparent soft PVC. Machines are still installed. The data for this ad was  ...

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

Used pet food production and packaging line made by Waldner. New 1995.

Key data: 27700 KW, 11000 V

27.7 MW Combined Cycle Gas Power Plant Wartsila 20V34SG 2 x 8.7 MW Wartsila 20V34SG Gas Generators Engine Type: Wartsila W20V34SG Engine output: 9.000 KW Year of built: 2009 Working Hours: 34.000 Hours On average Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 11000 kVA / 9 MW each Speed: 750 Rpm Control System: WECS 4 x Caterpillar 3520C Generating Sets Engine output: 2.000 KW Year of built: 2006-2007-2008 Working Hours: approx. 30.000 hours on average Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 11000 kVA / 2 MW each 2.3 MW Skoda Steam Turbine Turbine manufacturer: GUANGZHOU SKODA-JINMA Model: BN 2.3-17/7/360//190 Turbine output: 2300 kW Turbine type: Steam turbine Year of Make: 2011 Transformer output: 3 MVA Transformer rating: 31,5/6,6 KV Used 2 x YORK HW-14F3-50-C-S-C Absorption Chillers Manufact ...

material width: 200 mm material thickness: 3 mm feed length: 999999 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ball Bushing Linear Guide, Open Linear Bearing Unit INA KGB0 2558 PP ( KGB02558PP ) Diameter: Ø 25 mm Foot: 81 x 29 mm Hole Spacing: 68 mm Material ( Housing ): Aluminum New ! Dimension: 81 x 58 x 54 mm

Well pump, centrifugal pump, water pump RED JACKET UMP i50S3-S diameter. Ø 120 mm motor: 1.2 kW 220 V

INA I09 LKS 08VBG3 V1 ( I09LKS08VBG3V1 )

INA LFKL 52 E SF (205-155) ( LFKL52ESF(205-155) )

Linear guide carriage with linear guide rail INA Linear guide carriage: O4 D4 KWE 35 G3 V2 ( O4D4KWE35G3V2 ) table: 75.5 x 100 mm 4x Threaded hole: M10 x 1.5, continuous Hole spacing: 82 / 62 mm 4x Bore: Ø 7.5, continuous Hole spacing: 80 mm Linear guide rail: B7 TKD 3FG3/0300 ( B7TKD3FG3/0300 ) length: 300 mm, width: 34 mm, height: 23 mm through holes: Ø 9.5 / 15.0 mm, depth: 11 / 12 mm hole spacing: 80 mm used, tested ! Dimensions: 300 x 100 x 48 mm

Ball screw INA ZKLF 2068.2RS NA ( ZKLF2068.2RSNA ) 02/W6 ASP 14-20 ( 02/W6ASP14-20 ) thread length: 845 mm thread: Ø 32 mm pitch: 4 mm for AGIE CUT 300 used, tested ! Dimensions: 1200 x 210 x 125 mm

Pillow Block Bearing, with Insert Bearing INA RASEL40-N 2 pieces ! Housing: GG. ASE08 insert bearing: GLE40-KRR-B shaft diameter: Ø 40 mm Dimensions (single bearing): 179 x 43 x 99 mm New ! Dimensions (packing): 180 x 90 x 100 mm

Pillow Block Bearing, with Insert Bearing INA RASE50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (packing): 200 x 130 x 120 mm

HFO Wärtsilä Generator Spare Parts — Worldwide Supply AJAM GROUP EU is leading the way in the global supply of spare parts for HFO Wärtsilä generators, supporting shipowners, operators, power plants, and industrial customers with reliable solutions wherever they operate. Our extensive sourcing network and industry expertise enable us to provide high-quality generator spare parts with fast and dependable worldwide delivery. From critical engine components to routine maintenance parts, we understand the importance of minimizing downtime and keeping your power-generation equipment operating safely and efficiently. Why Choose AJAM GROUP EU? Worldwide Supply – Reliable delivery to major ports and destinations around the globe. Quality Spare Parts – Carefully sourced components for HFO Wärtsilä generator applications. Technical Expertise – Professional support to help ...

Pillow Block Bearing, with Insert Bearing INA RASEY50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GEY 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 52 x 115 mm New ! Dimensions (packing): 200 x 110 x 120 mm

This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details.

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T

max. load: xxx N 0: 270x160x85 mm weight: 13,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Vibrating plate DPU, Technical specifications:, Year of construction: 1997

Pillow Block Bearing, with Insert Bearing INA RASEL50-N 2 pieces ! Housing: GG. ASE10 insert bearing: GLE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 50 x 115 mm New ! Dimensions (packing): 200 x 100 x 120 mm

Bagger Minibagger

Pillow Block Bearing, with Insert Bearing INA RA SE70 housing: GG. ASE14 insert bearing: GE 70-KRR-B shaft diameter: Ø 70 mm New ! Dimensions: 260 x 65 x 156 mm

Housing Unit, Three-Hole Flange Bearing Housing Unit, Flange Bearing INA PCFTRY 35, PCFTR35 2pcs ! housing: CFTR07 insert bearing: GAY 35-NPP-B Shaft diameter: Ø 35 mm Dimensions (single bearing): 145 x 128 x 45 mm New !' Dimensions (Packing): 145 x 130 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 45 2 pieces ! housing: CJTR09 insert bearing: GLE 45 KRRB FA115 Shaft diameter: Ø 45 mm Dimensions (single bearing): 180 x 110 x 50 mm New ! Dimensions (Packing): 180 x 110 x 100 mm

Engine Brand: WAUKESHA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Working Hours: 19642 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1038 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1650 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2382 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/waukesha-16v150ltd-generator-1 650kva-used/255, , = More information =, , Empty weight: 12.475 kg, Type number: 16V150LTD GENERATOR 1650kva

WANGEN PUMP TWIN 104 Used Wangen TWN 104 hygienic twin-screw pump manufactured in 2014. Mobile unit with variable-speed electric drive, suitable for high-capacity transfer of liquid, viscous and sensitive products. The contact-free twin-screw pumping principle reduces shear forces and helps protect the consistency, structure and appearance of sensitive products The pump offers high suction performance and reversible operation, making it suitable for tank emptying, loading, unloading, recirculation and product recovery The wide operating-speed range allows the pump to handle both process products and cleaning liquids. The pump is mounted on a mobile support frame and equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs Technical Data - Maximum product temperature: Up to 130°C - Maximu ...

WANGEN PUMPS, TW IN 70 Used Wangen TWN 70 hygienic twin-screw pump manufactured in 2014. Mobile unit equipped with an electric motor and variable-speed drive, suitable for the gentle transfer of liquid, viscous and shear-sensitive products. The unit is mounted on a mobile support frame and is equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs. The wide operating-speed range allows the same pump to be used for both product transfer and CIP circulation, subject to the installed drive, seals and specific configuration. Technical Data - Maximum viscosity: Up to 1,000,000 mPa·s / cP - Maximum particle size: Approximately 20 mm - Maximum flow rate: Up to approximately 25 m³/h at 4,000 rpm - Maximum differential pressure: Up to 16 bar - Maximum product temperature: Up to 130°C -  ...

Pillow Block Bearing, with Insert Bearing INA RASE50-N 10 pieces ! Housing: GG. ASE10 insert bearing: GE 50-KRR-B shaft diameter: Ø 50 mm Dimensions (single bearing): 200 x 63 x 115 mm New ! Dimensions (package): 520 x 260 x 120 mm

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 Master - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - with proofer - Floor height see picture -Dimensions: Width 118cm Depth: 114cm (+47cm hood) Height: 192cm (+25cm hood) Height is adjustable - Floor entrance height: 16cm - 20.32kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 09 / 2015

Tier Oven Wachtel Piccolo PRO II-5 Year: 2021 - Steinplatten oven built in 12 / 2021 - Manufacturer: Wachtel - Type: Piccolo PRO II-5 - 5 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 42.3 kW - Year of construction 12 / 2021

The machine (built 1999) comes with a table of 3 x 4m, can work with up to four cutting heads and is fully functional. The scope of supply includes an automatic sludge extraction system, sand storage tank incl. pressure vessel and an Ingersoll high-pressure pump. 2x head system. Can also run with 4x heads 1x pump included. has always been serviced. Is ready to use. Great working condition. Find more here - .ucymachines/ Contact us at - sales@ucymachines

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg

2012 Wachter Rotar 60 Back-up fuse: max. 65A Designation: Parts cleaning system E-connection 3x40v/50Hz Find more here - .ucymachines/ Contact us at - sales@ucymachines

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 340/340/H100 mm -Weight: 2.4 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.4 m -Connector: 2-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.1 kg

approx. 235 pieces order picking trolleys, Wanzl, 2 sizes – used - : Price for partial quantities (2 intermediate floors per car): Up to 30 pieces: 195.-€ (net) / piece Up to 60 pieces: 185.-€ (net) / piece Up to 120 pieces: 175.-€ (net) / piece Minimum order: 10 pieces Price for complete acceptance: 35.000.-€ (net) incl. loading! The special price is only valid for pick-up until week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Type: KT3 1297 Year of manufacture: different e.g. 2012 / 2018 Load capacity: 300kg Load capacity per floor: 50kg Most of the cars are 1300 meters long. Some of the wider ones also have 1700 lengths. approx. 185 pieces are all wide (60cm deep) approx. 50 pieces are narrow The equipment with intermediate shelves is sometimes very different (see photos), on average there should be at least 1 – 2 interm ...

2012 Wächter ROTOR 60-2-Bad -- WACHTER CLEANING SYSTEMS Machine: Feeding height 9 5 0 m m Basket usable size LBH 600 x 400 x 300 mm width 1 300 mm Depth 1 600 mm Height2 200 mm ( other dimensions possible) 5. heating: Washing coils 6. drive Rhonrad: 7. belt skimmer drive 8. vapour condenser 9. Pneumatic lifting door 1 O. Automatic water level regulation 11. stainless steel basket with clamping cover VA 600x400x300mm. Mesh 6x6mm Oatum: 13.03.18 15kW 7,5kW 0,12 kW 0,04 0.45kW Basket optionally rotated, swivelled or without movement. Control system:SPS Kloeckner EASY Find more here - .ucymachines/ Contact us at - sales@ucymachines

For sale is a Wagner WAC 70 circular saw in excellent condition, including a bundle loader. This high-quality machine is ideal for precise cutting and efficient handling of wood and workpieces in wood processing. Type: Circular saw Model: Wagner WAC 70 Additional equipment: Bundle loader Features of the Wagner WAC 70: Precision: The WAC 70 offers precise cuts for a wide range of wood types and formats. Performance: Robust construction for a long service life and high performance. Efficiency: The integrated bundle loader enables fast and efficient material feed, which significantly speeds up the production process. Operating Voltage: - Main: 400V, 50Hz - Control Voltage without transformer: 230V - Control Voltage with transformer: 25V Rated Current: 23A

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

Key data: 45 °, 2800 mm

Sliding Table Saw Main motor 5.5 KW Scoring saw

Warman Pumps Listing 1.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 2.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 3.Pump Type: 3 / 2 CAH 4.Pump Type: AH Find more here - .ucymachines/ Contact us at - sales@ucymachines

Tier Oven Quail Mini Piccolo 4 - 4 shelves for 4x trays 60x40cm - one 60x40cm tray per floor - with proofer - With extractor hood - DMS 3 Master Timer Control - Top and bottom heat can be adjusted separately - Power: 16.5 kW - 400V / AC /3Ph / N / PE / 50 Hz - Year of construction 02 / 2013 -Dimensions: Height: approx. 220 cm Width: approx. 97 cm Depth: approx. 100 cm

Straight and cut machine Wafios R31 Diameter: 1-5mm – 7mm MY: 1993 – working condition Machine Number: 26106224 Extension length: 2m or 6m available Pay-Off: not available, we can offer separate for 3t. Mechanically refurbished Electrical checked Machine is in working condition

Deck Oven Quail Piccolo I-5 IQ Year: 2017 A used electric deck oven Wachtel Piccolo I-5 IQ with 5 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-5 IQ - 5 shelves each 80x60cm - Each floor with separate controls - With Touch Scren Display - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With storage cabinet for trays - With exhaust hood - Stove with water connection for steam - with proofer - Shelf height see picture 165mm - External dimensions: - Floor entrance height - Height is adjustable - Electrical connected load: 24.7kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 06 / 2017

A used electric deck oven Wachtel Piccolo I-4 with 4 shelves each 80x60cm is functionally tested for sale and immediately available. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-4 DMS 3 Master EM Timer K - 4 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box for the generation of steam - with automatic night start function - with exhaust hood - Stove with water connection for steam - Height is adjustable - 19.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 10 / 2010