wa used for sale

IRHD Wallace Hardness Tester

Used KRONES 32.000 bph one-way PET filling line Former products: Carbonised water, CSD, energy drinks Scope of machines: NEA high-pressure compressor (approx. 9,000 operating hours) NEA high-pressure compressor (approx. 18,000 operating hours) 2001 LOHENNER compressed air tank 5,000 Ltr. 2001 MTA RWD350C dry recooler (roof / outdoor installation) 2001/2002 MUCKI MD-3 preform feeder with tipper with 500 kg load capacity 2001/2001 TANNER SBT-2212 preform hopper with unscrambler 2001/2001 TANNER HFT-3510 preform vertical conveyor 2001/2001 TANNER preform sorter incl. ejection unit 2001/2001 TANNER AST-3006 preform slide incl. air rinser 2001/2001 TANNER VZT-2500 electrical cabinet 2001/2001 SIG COROPLAST BLOWMAX 12 stretch blow molding machine, max. 18,000 bph - (One blowing machine must be replaced!) 2001/2001 RIEDEL PC 630.01-NE preform cooler 20 ...

table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 930 KW, 1100 kVA

Wartsila 6L20 Gensets 60 Hz 1100 Kva 4 units available from our stock in Turkey Generating set years 2004 / 2008 /1998 / 1998 In good used condition

The facility is an exhibition facility or test facility in an absolutely new condition. The plant was built in 2024 for the filtration of cooling lubricants in tool grinding: oil + carbide. Filtration is carried out with the help of 61 filter cartridges located in a cylinder housing. The dirty oil is pressed through the filter surface and runs through the inside of the filter into the clean container. The filter works in fully automatic mode. The filter pressure is monitored during the filtration process and as soon as the filter cake has been formed and the pressure increases, the filter is backwashed with compressed air. Then the filtration process starts all over again. The filtration system can be directly connected to the grinding machine, lapping machine, honing machine, etc. Filtration is carried out without consumables, as the filter is backwashed (filter flow, etc.). Th ...

Key data: 6300 KW, 7400 kVA, 11000 V

Wartsila 18V32DF genset Engine output: 6.300 KW Year of built: 2008 Working Hours: 35.664 hours Alternator Type: LEROY SOMER SA 58 XL11/8P Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 7400 kVA / 6.3 Mw Speed: 750rpm Sold together with auxiliary equipments please contact us for more information regarding scope

amount: 2 STK weight - pallet system: 11 kg dimensions: 540 x 2000 x 100 mm Hobbing cutter possibly Pfauter P 400 - 2 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6300 KW, 7400 kVA, 11000 V

Wartsila 18V32DF Dual Fuel Gensets Engine output: 6.300 KW Year of built: 2008 Working Hours: 35.664 hours Alternator Type: LEROY SOMER SA 58 XL11/8P Volt. / Hz / Phase: 11 KV / 50Hz Power Rating: 7400 kVA / 6.3 Mw Speed: 750rpm Sold together with auxiliary equipments please contact us for more information regarding scope

Key data: 1000 KW, 400 V

Biogas engine Waukesha. Complete CHP Brand; Waukesha Type; APG1000 YoM 2010 Hours; +/- 65,000 Voltage 400V RPM; 1500RPM Freq; 50Hz Can be delivered immediately. Can be delivered with Drycoolers, roofhoods, gaspretreatment, Remote control cabinet, GCB, Transformer, Heat exchange platform

table diameter: 500 mm table load: 0,4 t table height: 160 mm total power requirement: 0 kW weight of the machine ca.: 0,18 t dimensions of the machine ca.: 0,70,80,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Wärmebehandlungsöfen Wärmeofen Wärmeprozessöfen Warmhalteofen Warmluftofen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Durchlauföfen Herdwagenöfen Kammeröfen Schachtöfen Schmelzöfen Industrieöfen gebraucht Industrieöfen Neubauten Industrieöfen gebraucht Plasmanitrieranlagen Drehherdöfen Drehtrommelöfen Durchlauföfen Herdwagenöfen Induktionshärteanlagen Kammeröfen Ofenanlagen Schachtöfen Vakuumöfen Herdwagenofen Rollenherdofen Kammerofen Drehtellerofen Wagenherdofen & Tunnelofen Haubenofen Schachtofen Sonderanlagen Härt en GlühenNormalisieren Weichglühen Isothermglühen Vergüten Anlassen Entspannen Hubschritt-Kettenförderofen Ringherdofen Kammerofen Durchstoßofen Drehherdofen Rollenherdofen Gußplattenbandofen Reinigungsanlagen

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997