126,772 used machines on RESALE, but how to find them? Machine Search
Equipped with lifting bracket Auction-ID: A1-45866-82
arm length: 3000 mm weight max. in kg: 250 kg swivelling range: . Grad height: 3800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Lifting height 3800 mm Crane number 1.27 The techn. Information is provided by the manufacturer or operator and is therefore non-binding. We reserve the right to prior sale, Our terms of sale apply exclusively. About us More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70 t More than 1000 items Accessories for your workshop If you want to sell machines, systems or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Thick: 40mm Length: 2.45m Approx. 1.00cbm Auction-ID: A7-45983-302
Stainless steel with heating, Engine must be replaced. Auction-ID: A7-45983-69
Width: 1m Height: 1.5m Depth: 700mm Auction-ID: A7-45983-82
Auction-ID: A1-45889-2956
Auction-ID: A1-45889-2952
Flowrate: 2m3/hr DI Water Capacity Tank : 2,000kg Hot Water Capacity Tank: 500kg RO/DI Water Capacity Tank: 1,000kg
2 wall convectors DIMPLEX, 230 V - 50 Hz, 2000 W Colour White Auction-ID: A7-45960-31
2013 SEPARFLEX 250 A Automatic water separator Find more here - / Contact us at -
We offer you a Krone TX 460 D from a current disposal. Year of manufacture: 2023 Registration date: 04.09.2023 Condition: - General condition OK - PTO shaft missing, roof left crooked - Machine dirty - No papers available - Accident damage found at the rear Hours: - Asking price: 57.500,00 EUR VHB Original price: 74.500,00 EUR Equipment / accessories / other information: Low drive with drawbar Wheel 710/50 R30, 5 TL 10 L Hydr. Off; 26,5; Gel; Compressed air bottom hitch; K80 with drawbar suspension 2-roller dosing unit Hydr. Unloading aid Cargo compartment cover Suspension 40 km/h Asset Manager: Klaudius Giolbas Phone: 01722796951 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 37186 Moringen The sale is without warranty Subject to prior sale
Cold wall plasma system this system has only been put into operation and has not been in use since then. It is used to activate surfaces or can also be used for nitriding processes. The equipment is as good as new and has never been in full production Usable space diameter 800mm Usable space height 1100mm Max. load 1500kg Operating hours only approx. 250h. Technical data: Usable volume DM 800mm H1100mm Max. load 1500kg Max. process temperature 580°C Pressure sensors manufacturer Pfeiffer - Model: CCR 373 Mass flow controller manufacturer Alicat (Ar, N2, CH4, H2) Vacuum pump manufacturer Pfeiffer Duo 65M Plasma generator specification Find more here - / Contact us at -
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-45756-57
Unused; lenght 2900mm; wide 219mm; Thickness 26mm Auction-ID: A1-45756-64
2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-45756-46
The Channel Baler BOA-45K is a high-capacity machine designed for compacting recyclable materials and waste into dense, manageable bales. Ideal for recycling facilities, waste management operations, and industrial applications, this robust baler efficiently processes paper, cardboard, plastics, and more, reducing material volume and optimizing storage and transportation. Technical data Type I / II / III Drive Pump Motor I: - 18.5 kW / 30 kW / 37 kW Pump Motor II: - 18.5 kW / - / - Oil Cooler with Air: - 0.75 kW / - / 0.75 kW Binding Device Vertical: - 1.1 kW / - / - Binding Device Horizontal: - 1.1 kW / - / - Mono Distributor: - 11 + 0.75 kW / - / - Total Power Consumption of the Press: - kVA Maximum Working Pressure: - 280 Bar Oil Tank Capacity: - 800 liters Hydraulic Oil: - ISO-46 Maximum Oil Temperature: - 70°C Bale Dimensions (Width): - Approx. 115 cm Bale ...
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-45756-52
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-45756-47
Unused; length 2900mm; wide 194mm; Thickness ca 25mm Auction-ID: A1-45756-51
A deposit of €3000.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveill ...
Unused; lenght 2900mm; wide 219mm; Thickness 26mm Auction-ID: A1-45756-63
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-45756-58
Falch Pressure Washer R10/800, 1000 bar; only 2939 hours in use; complete with accessories as well as two rotary guns. Price basis for negotiation: 15.000,00€ net! If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
Kitzinger Dishwasher Type Contino 800 Q BS3 REKU Year of Make: 2012 Noise exposure 85 dB (A) Output approx. 800 baskets/planks per hour possible Electr. Connected load: approx. 100 KW Washing temperature approx. 50°C Rinse temperature approx. 80°C Fresh water consumption: approx. 400 l/hour Tank volume approx. 1500 litres (pre-wash and main wash tank) Blow-off from 3 sides with 3 motors Max. throughput dimensions crates: 400mm high x 650mm wide Max. throughput dimensions of sheets/planks (portrait): 440mm high x 60mm wide Dimensions approx. LxWxH: 12,000mm x 2,200mm x 2,700mm Weight: approx. 1,500 kg - immediately available from STOCK
Hobart Dishwasher Type: FXS-10A & 10B Specifications: Power connection: 400V / 7.6 kW / 15.8 A / 50 Hz Capacity: 40 baskets/hour Programs: 90 / 180 / 360 sec. Insertion height: 52.5 cm Built in 2017 and 2014 Dimensions: Width: approx. 60 cm Depth: approx. 60 cm Height: approx. 80 cm
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-45756-59
Unused; lenght 2900mm; wide 219mm; Thickness 26mm Auction-ID: A1-45756-66
Unused; lenght 2900mm; wide 219mm; Thickness ca 26mm Auction-ID: A1-45756-56
The fully automated high-bay warehouses with state-of-the-art Technology - available from 2.5 to 15 meters high - in 500mm increments, available from stock! Measure your ceiling height, 25mm distance to the ceiling is sufficient for the installation of the storage tower. The alternative to used storage systems (Kardex, Hänel, Modula and Megamat) Feel free to take a look at our product variety, We look forward to your inquiry Delivery possible within 48 hours after receipt of payment! Optionally with app connection! The high-density bearing at 25-millimeter intervals creates the largest capacities in a small footprint.
maximum number of results exceeded
please refine your search
50 € 
