126,702 used machines on RESALE, but how to find them? Machine Search
Cold water high-pressure cleaner with 4 kW output - 170 bar pressure and 14 l/min. Including hotbox up to 200 bar. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink p ...
Cold water high-pressure cleaner with 2.2 kW output - 150 bar pressure and 8 l/min. Including hotbox up to 200 bar. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - ...
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Te Coop: Endress & Hauser Walter Contacters HTA 423
Te Coop: Endress & Hauser Walter Contacters HTA 380
GP115 - used approx. 40 m³ / 40,000 litres polyester tank / GRP-tank, Staffelstein tank, aboveground, lying on two steel pedestals, good condition. capacity: approx. 40 m / 40,000 litres material: polyester / fiberglass length: approx. 6.50 m diameter: Ø approx. 3.00 m height including base: approx. 3.50 m Manufacturer Staffelstein, horizontal, round storage tank on two steel pedestals, access on the front side, multiple connections, in- and outlets as shown in the pictures. The container can be used as a storage tank for many different media such as water, liquid feed et cetera, or as a rain collection tank. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this ta ...
GS11 - used approx. 40 m³ / 40,000 litres steel tank, insulated container tank with heating coil, former palm oil tank, in good condition. Aboveground storage tank, lying horizontally, insulated container tank, former palm oil tank. Technical details: year of construction: approx. 2007 total tank capacity: approx. 40 m³ / 40,000 litres capacity at max. filling height: 37,000 liters (decrease due to the insulation) dimensions incl. insulation: h 2.10m, w 2.50m, l 9,50m weight: approx. 7.5 t material: S235JRG2, single-walled steel tank with 80 mm of insulation certification mark: Z-38.11-143 tested pressure inside storage space: 2.73 mH2O other: incl. forklift pockets at the tank bottom and crane eyelets on top for transport, incl. inside heating coil. The container is used, has been emptied and professionally cleaned inside. Corresponding to the age there a ...
Cold water high-pressure cleaner with 7.5 kW power 150 bar pressure and 30 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
The BTS-240 Bin Compactor is ideal for material compacting in your 240 Ltr. garbage and recycling bins. Large bulky rubbish, but also cardboard and recyclable materials can be compacted easily and safe to a minimum of its size. By compacting these waste and recyclable materials you achieve a volume reduction of up to 80%, a significant saving on your disposal costs and you also create a safe and clean working environment. Pressing force: 2 Ton Compaction: up to 80 % (material depending) Machine size: 2360 H x 780 W x 780 D mm Machine weight: 234 kg Transport height: 2360 / 1754 mm (on request) Cycle times: 20 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Optimum utilization of garbage bins Reduces the number of waste bins No more climbing into bins Reduces frequency of waste collection A qu ...
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 7.5 kW power 270 bar pressure and 15 l/min. Connection: 400 V; 50 Hz; 16 A Equipment: - Stainless steel frame - Powerful motor with long service life due to low speed - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 38 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Lance holder on the left and right side of the device - Water inlet temperature up to max. 60° (standard) - Chemical suction as standard for devices up to 21 l/min at 200 bar - 10 m power connection cable, 16 A plug Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - HDP350 ...
Cold water high-pressure cleaner with 2.2 kW power 150 bar pressure and 8 l/min. Connection: 240 V; 50 Hz; 10 A Equipment: - Stainless steel frame - Powerful motor with long service life - High pressure pump with brass cylinder head, all-ceramic pistons and stainless steel valves oil bath lubricated, low noise and vibration-free - Good handling due to pipe diameter of 25 mm - Ergonomically designed for good mobility - Very manoeuvrable to drive due to optimized device center of gravity - Chassis with solid rubber tyres - Crane lifting points - Water inlet temperature up to max. 60° (standard) - 10 m power connection cable - Automatic stop system Standard accessories: - 10m high pressure hose DN6, kink protection on both sides - HDP350 high pressure gun - High pressure jet tube with nozzle 030 Optional (additional cost): - Hose reel with 15 m hose The imag ...
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
Many thanks for your interest on our new machines, please find follow our offer: manufacturer: Bauermeister Type: MWA 21 Mandelwaschanlage / almonds cleaning machine Year of manufacturing : 1981 Output 500kg/h Enginepower: 0,75kw dimensions: 3000x900x1500 electrical: 380 V We offer this machine in as-is where it is condition, without warranty, ex warehouse/location (Incoterms EXW), without packaging
DYNAJET 500th HELI ATC RC INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! For purchase: Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner In addition to its user-friendliness, 500th with up to 500 bar working pressure is characterized in particular by its low weight, compact dimensions and high level of performance and safety. Construction 1-axle chassis with pneumatic tyres for easy manoeuvring on site Self-supporting and indestructible framework for weight optimization Crane eyelet for easy transport and handling Underrun protection for additional safety Frame in dip painting technology ...
Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...
Hot water generator KENT Duo HotBox 500 bar Description: - Working pressure: up to 500 bar - Flow rate: 2 x 11-56 L/min. - Burner: oil / approx. 90 KW - Tank: approx. 20 L - incl. Automatic Start/Stop Flow - incl. flame control - incl. operating hours counter - Chassis: Black lettered - Hood stainless steel Features: - Powder-coated frame with stainless steel cover - 4 wheel chassis with solid rubber tires - fan motor, - Oil pump - KENT burner boiler with approx. 90 KW heating capacity - Automatic switch-off start-stop flow controlled - incl. E-connection cable - Water inlet temperature max. 60°C Scope of delivery: - Inlet hose Dimensions: (L x W x H in mm) 1000 x 680 x 760 Weight: approx. 190 Kg Shipping possible. Prior sale and error excepted. The terms and conditions of Cleantec-MR apply.
Hot and cold water high-pressure cleaner Working pressure: infinitely variable up to 500 bar Maximum requirement quantity: 14-30l /min Pump:3-Plunger,All-Ceramic Engine: Hatz,3-cylinder diesel (water-throated) Motor power:42kW Speed motor/pump: 2,350 /1,450 rpm Pump drive:V-belts Fuel consumption:approx. 5.3 l/h Volume fuel tanks:70l/105 l Volume water tank: 1000 l Pressure outlet:(water): M241.5 IG Heating capacity olburner: 291 kW (ca 95 °C) Consumption olburner: approx. 9.1 l/h Construction: self-supporting frame on frame with forklift pockets Empty weight: approx. 1,450 kg Mass: (LWH) 220+147177 Ground open (LWH) 307147246 Article no.: 1 491 030
Water tanks for crop sprayers, standing or lying flat, 3,000 L, 4,000 L, 5,000 L, 6,000 L and more. Used polyester tanks / GRP-tanks, water tanks, barrels, storage containers for field sprayers. We offer vertical or horizontal tanks, round or square shape, made from robust fibreglass, with several in- and outlets for filling your sprayer. Our tanks are used, have been professionally cleaned and are in good condition. The containers can further be used as storage tanks for water, liquid feed, whey, potato steam skins, molasses, liquid manure, seeping juice, rapeseed oil, for rainwater collection and so on. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already bee ...
new
Cold water high-pressure cleaner Working pressure: 800 to 2,800 bar Required quantity: 8 to 27l/min Pump: Slow-running high-pressure pump with 3 carbide plungers, integrated reduction gear, compression lubrication and engine clamp Engine: VOLVO PENTA 4 CYLINDER Diesel,water-throated,5.200cm3 Engine power:160 kW,220 hp Motor/pump speed: 2,065rpm / 500 rpm Pump drive: Gearbox Fuel consumption:approx. 21 l/h Volume fuel tanks200l Volume water tank: 160l Volume urea tank: 25l Consumption urea: approx. 1.05 l/h Pressure outlet:(water): 9/16'' -18UNF LH IG or DYNAJET Easy Connect EC Chassis: 2-axle attachment Empty weight: 2.690kg Mass: (LWH)467197218 Ground open (LWH)487197254 Article no.: 1 610 040
GS14 - used approx. 100 m³ / 100,000 litres double-walled steel tank, heating oil tank, firefighting water tank, water cistern. In good condition, aboveground tank on two mounted steel consoles, storage tank, water tank, former oil tank, steel tank painted in green. capacity: approx. 100 m³ / 100,000 litres material: steel tank, double-walled, DIN6616/2 dimensions: Ø 2.9 m x approx. 15.8 m long weight: approx. 17.0 t manufacturer: Kraemer Apparatebau other: 2 entry shafts Upon request the tank can be repainted for additional charge. The container is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This steel tank / container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask u ...
S5 - used 50m³ / 50,000 litres steel tank, double-walled, underground tank, firefighting water tank, water cistern. In good condition, underground or aboveground tank, steel storage tank, water reservoir. Surface coated with bitumen insulation / bitumen painting. capacity: approx. 50m³ / 50,000 litres material: steel tank / underground tank, double-walled manufacturer: Mannesmann dimensions: approx. Ø 2.5m x 10.0m long weight: approx. 8.0 - 10.0 tons The steel tank is used, has been emptied and professionally cleaned inside. According to the age there are traces of use. This container can serve as a storage tank for water, waste water, sewage, manure, seeping juice, rapeseed oil, or as rainwater collection tank, water cistern, firefighting water tank etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your dem ...
WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from: -a- The destacking position on the buffer (this is also the ...
S6 - used approx. 1.5 m³ / 1,500 litres steel tank on wooden skids, double-walled, in good condition. Storage container, water tank, firefighting water tank, diesel fuel tank, heating oil tank. capacity: approx. 1.5 m³ / 1,500 litres material: steel, double-walled diameter: approx. Ø 1.0 m length: approx. 2.1 m overall height: approx. 1.2 m incl. skids The steel tank is used, has been emptied and professionally cleaned inside. According to the age traces of use are present. This container can be used as a storage tank for many different media. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please ...
CIAT LG-LGP 900Z Product number:M18-4309 Cooling capacity:249 kW Refrigerant:R407C Refrigerant Content:12,3 + 13,3 kg Voltage:400 Volt Power consumption:67 kW Dimensions:2200 x 900 x 1700 mm Weight:1223 kg Year:2004 Number in stock:1 piece(s) Price:Quotation request Very nice water cooled Ciat water chiller with 4 scroll compressors distributed over 2 circuits. Mentioned capacity at a water temperature of +12/7°C (inlet/outlet) and an condenser water temperature of +30/35°C (inlet/outlet). Visit also our website: used-refrigeration
Washing machine 0.5 l bottle / 14,000 FL/h
Steel tank, used approx. 100 m³ / 100,000 litres underground tank, water tank, firefighting water tank, water cistern. In good condition, underground storage tank for horizontal placement. capacity: approx. 100 m³ / 100,000 litres material: steel tank dimensions: approx. Ø 2.9 m x 15.8 m long weight: approx. 17.0 t other: exterior with bituminous insulation or bitumen painting The tank is used and has been emptied and professionally cleaned inside. According to the age traces of use are present. It is in good condition, yet slight insulation damage caused by transport may be present on the outside. This steel tank / container can be used as a storage tank for many different media. Also we can modify the tank to suit your demands, e.g. as a fire-fighting water tank, just ask us. Price upon request. Transport can be arranged at low cost. It is not possib ...
Halls solid sheet metal partitions 10.20 x 10.90 meters Solid sheet metal partition walls can be used for the subdivision of hall areas into industrial halls and warehouses, but also for halls with production processes. They are used wherever separate work areas are necessary, or where work areas have to be closed off or separated. The flexible system has a modular design and enables fast assembly and thus a short-term implementation of your project Mass: HxDxW = 3.60 x 10.20 x 10.90 metres Double wing door width 2.30 metres Further storage technology - new and used - can be found in our shop! International shipping costs on request!
Lowara pump FHS 100-200/300 ELP 120-310m ³/h 47m - 22, 6m, P2 30KW, incl. non-return valve and line reducing valve
P123 - used approx. 3 m³ / 3,000 litres polyester tank, GRP-tank, aboveground, vertically standing, on steel frame, in good condition. technical details: capacity: approx. 3 m³ / 3,000 litres material: polyester / GRP manufacturer: Erka dimensions: approx. h total = 2.30 m / w = 1.10 m / l = 1.60 m Used storage tank in good condition, standing, hatch on the front side, several in- and outlets. The container can be used as a storage tank for many different media such as water, liquid feed, whey, molasses, liquid manure, rapeseed oil or as a rainwater tank, etc.. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in ...
CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration
AUTOMATIC GUILLOTINE type TAGLIABUE TIA 3050 second hand hydraulic cutting system Cutting length mm 3020 Pressor stroke mm 110 Electrical rear feed - Max rear feed width mm 1250 - min rear feed width mm.23 Hydraulic unit motor power Hp 10 Rear feed motor power Hp 0.75 Safety photocells Weight kg 4000
New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...
Warm air heating Spanex UL/E-50 RW-02 with chips 40 kW L x W x H: 1970 x 820 x 1570 cm Weight 530 kg Year 2012 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
Hot water buffer tank with insulation Year of construction: 2011 Condition: Used Specifications Connections: 4 screw-ins for immersion sleeves: inner diameter 1/2" 2 flange connections: inner diameter 80 mm 1 filling neck: inner diameter 1 1/4" Metrics Height: 3,550 mm (boiler only) Diameter: 1,198 mm Circumference: 3,765 mm Volume: approx. 3,982 m³ Operating pressure: max. 4 bar Weight: approx. 500 - 600 kg Insulation: 160 mm The buffer tank has been reworked on the outside with rust protection and 2 coats of paint. Transport can be arranged through our house on request! Price: € 3,900.00 plus VAT ex Grunow site (Brandenburg) (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of exchange cannot be accepted.
5 PCS AVAILABLE BRAND FRIGEL MANUFACTURED 2007 CONDITION USED - IN WORKING ORDER QUANTITY AVAILABLE 5 UNITS MODEL RCD180/24 (180 LTS PER HOUR) TEMPERATURE RANGE 23 TO 194 F (CELCIUS -5 TO 90) VOLTAGE 400 VOLTS FREQUENCY 50HZ SHIPPIING WEIGHT 395.00 Kgs MAX CURRENT 52 AMP FLUID H20 MAX PRESSURE 8 BAR REFRIGERANT R407C HIGH PRESSURE 27 BAR LOW PRESSURE 22 BAR abc.FRIGEL.IT
New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...
Moulded Cones Machine Steinhoff HWA 54 Steinhoff/GAM/Haas Price: € 9.900 Machines # 79 Built: 1972 Number of baking tongs 21 Products per baking tongs 6 Location: Germany The machine is used to make moulded cones is sold with a tool for tulip squirrels. It is the predecessor of the Steinhoff EWA 65. The machine is currently in storage.
Flat waffle machine HAAS SWAK 64 Haas/Hebenstreit Price £75,000 Built around 1980 Location Germany Dimensions: -Height: 1500 mm -Height machine head: 2200 mm -Width: 1300 mm -Wide machine head: 1860 mm -Length: 12,000 mm Power supply: -Power: 4 kW -Power: 3x380 V -Number of baking plates: 64 -Engraving: 2.5mm x 0.5mm -Plate size: 460 mm x 290 mm -Leaf thickness: 2.8 mm-3.0 mm -Efficiency: 450-500 kg/8 h -Weight of leaf: 55 g/leaf -Baking time: 2:20 min Machine is sold together with the arc cooler and is currently in storage.
Hollow hip machine Haas EWB Price: £25,000 Machines # 3379 Built: 1975 Power: 10 kg/hour Connection power: 2.5 KW Volt 3x 380 Natural gas:? Location: Poland Dimensions -Length: 3.20m Bed: 1.70m -Height: 1.40 m The machine is used to make holhippets between 50 and 220 mm in length. The thickness can be adjusted manually.
Used cold water set, in top condition cooling power about 250 KW, at 17/12 ° C, device with built-in freezer, and 2 circulation pumps, electronic hirus control, built circa 1998, system was switched to the refrigerant R 407 C about 8 years ago. With speed controlled liquefier/open-air fan. Plant was still in full operation until 6 months ago, was dismantled due to an increase in operations.
Haas HTRO D 200 G waffle squirrel Price negotiating matter Built in 2002 Location Poland Product: 110 x 47 mm, 23 ° Dimensions: -Height: -Width: -Length: Energy supply: -Performance: -Power supply: -Gas: Natural gas -Gas consumption: About 25 m ³/h -Number of baking plates: 100 -Number of baking courts per baking plate 2 -Engraving exterior: 6 x 6 mm -Plate size: -Core strength: 1.6 mm Machine is currently in production. Walterwerk/GAM/Haas
Doka four-way head H20 - galvanized Ceiling support head for the support and stabilization of doka formwork carriers. Weight 4kg Length 25cm Width 20 Height 33 Doka 4-way head H20 - galvanized Floor-prop head for supporting and stabilising Doka formwork beams. Weight: 4kg Lenght: 25cm Width: 20 cm Height: 33 cm
We offer the following Doka Framax elements: Doka Framax Xlife 1.35 x 1.35m with 75% discount = 274,50€/pc net. 64 x Framax Xlife element 1.35x1.35m Accessories available on request. Formwork completely cleaned, inspected and sorted. Formlining fair-faced concrete class 2/3 possible without any problems. Out-of-the-box, suitable for higher-value use. If you have any questions, please contact Mr. Becker on 0049 176 70044689 purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Master Craftsman Company Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ Warehouse Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registry Court: HRA722943 VAT NUMBER: DE279047055
S20 - used approx. 40 m³ / 40,000 litres steel tank, double-walled, coated inside, incl. 2 bases, dome shaft, railing and ladder. technical details: capacity: approx. 40 m³ / 40,000 litres material: steel tank double-walled DIN6616/2 weight: approx. 7 t dimensions: approx. Ø 2.50 m x 8.70 m long Includes 2 bases, a prefabricated dome shaft made of steel in accordance with DIN 6626 as well as a railing and ladder, as shown in the pictures. The dome shaft, the railing and the ladder had to be dismantled for transport and cut off at the top, but are included in the delivery. The customer has to refit and weld these attachments himself on site. Upon request and at additional cost we can also supply a propeller agitator. Used steel storage tank in very good condition, outside painted in silver, coating on the inside, former glycol tank, with 2 dome shafts and connection ...
Machine Type: Cold Water Hose Manufacturer: for washing machines Type: 1/2 inch Condition: new Offer will only be sent if a complete imprint is provided! Price 250 Euro incl. 19% VAT free loaded. Location Warstein , Germany Reference M-SCH-0124-3 DESCRIPTION We offer you a lot of new hoses / up to 10bar / 25 degrees Specifications can be found on the sign in picture 2. Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions and payment terms. Errors in the descriptions and offers are excepted!
Transition / Stairs / Crossing, 3 stairs – used- : Price from location: 1.950.-€ (net), dismantled, packed and loaded! The position of the stairs on the landing can be changed. Manufacturer: unknown Type: unknown Year of manufacture: unknown Gratings Metrics: Platform height: approx. 1.60m Platform width: approx. 1m Platform length: approx. 3.65m (length outside incl. railing: 3.73m) Length: Stairs: approx. 2.10m Stair width: approx. 90cm Step spacing: approx. 20cm Step depth: approx. 26cm Step width: approx. 80cm Railing height: approx. 1.10m Gap between the platform supports: approx. 2.35m Condition: good – very good Available: now Location: Biebergemünd
- Crankc. end Cover End Wall Cover MWM 12302284 - Suitable for several motors - Please note! Price per piece! - 12302284 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting ...
maximum number of results exceeded
please refine your search
