wa notstromtechnik used for sale

Offer 25387 Specifications: - Drilling capacity in steel 60 mm - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Digital positioning indicator for stroke and position - Projection 1600 mm - Column diameter 350 mm -Max. Distance: spindle – base plate 350 - 1650 mm - Vertical stroke of the boom 1250 mm - Spindle speeds: infinitely variable 30 - 1500 rpm - Feeds infinitely variable 1 - 600 m/rev - Drive 400 V / 8.9 kVa - 2 x dice table - Coolant device - Space requirement approx. W 2490 x H 2980 x D 1060 mm - Weight approx. 3800 kg

Availability: immediately Current Type: AC Operating voltage: 230V/50 Hz Control voltage: 24 V DC Rated current of the machine: 7.6 A Weight: 213 kg

used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end

Used Waldner Dosomat 10.4 rotary machine. New: 2011. Voltage: 230/400V AC. Capacity: 8,000–9,600 pieces/hour. Weight: 3,500 kg.

Used Waldner Dosomat 10.4 rotary machine. New: 2005. Voltage: 230/400V AC 50 Hz. Capacity: 7,200 pieces/hour. Weight: 3,500 kg.

This SiteLight 2G package includes a complete set of 96 new, previously unused LED mesh modules , including packaging. The modules originate from a uniform SiteLight setup and are based on the 2G generation with LED mesh technology. They were originally designed for use as a media façade and construction site communication solution †for example when mounted on façades, scaffold tubes, or high-rise formwork in combination with protection screens such as Xbright. This makes them particularly suitable for projects that require large-scale LED surfaces on buildings or construction sites. 💡   The modules have not been individually tested prior to sale and are therefore offered as untested stock . This means that the modules may work, but this cannot be guaranteed . No statement is made regarding the actual functionality of individual panels. 🔍 Deliver ...

Already working with the Doka Edge Protection System XP? Then this accessory package is your next logical move.  With original Doka railing clamps and XP posts, you’ll expand your system exactly where it matters †whether it’s for additional sections, larger areas, or extra safety along the edges.  🔧 100% original Doka XP parts  📦 Ready for immediate delivery †incl. reusable packaging  💶 Full package for just €5,399.†(net)  This package is ideal for anyone looking to extend their existing XP setup quickly and efficiently †no extra planning needed. Everything fits. Everything works. Just like youre used to.    Expand now †before you hit the limit.  The accessories are ready †you just have to grab them. 😉  👉 Ask. Decide. Go.  Price: from € 5399,00 ...

This SiteLight 2G package includes 96 used LED mesh modules , offered as a complete set including packaging. The modules originate from a connected SiteLight system and are based on the 2G generation designed for large-scale LED mesh applications. They were originally intended for use as a media façade and construction site communication solution †for example when mounted on façades, scaffolding structures or high-rise formwork in combination with protection screens such as Xbright. This makes them suitable for projects requiring extensive LED surfaces on buildings or temporary installations. 💡   The modules have not been individually inspected before sale and are therefore offered as untested used equipment . Some panels may be functional, but this cannot be guaranteed. No statement is made regarding the actual functionality of individual modules. 🔍 ...

AKOMAG Combi 175-18 Semi-Automatic Bottle Washer (150–500 bph) AKOMAG Combi 175-18 is a compact, semi-automatic bottle washer designed for efficient internal and external cleaning of glass beverage bottles, including wine, beer, water, and soft drinks. Ideal for small to medium production volumes, it delivers a throughput of 150–500 bottles per hour, depending on bottle size, shape, and label removal requirements. Built entirely from stainless steel, the machine features a space-saving, modular design with options for sanitization and auxiliary modules. It uses a heated NaOH water solution (up to 70 °C) with low-pressure steam to ensure thorough washing and effective label removal. Automated rinsing and washing processes are combined with manual bottle loading and unloading for operational flexibility. Engineered for low water and energy consumption, the AKOMAG Combi 175-18 o ...

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

Wire gauge range: 1.5 - 7.0 mm Section lengths: max. 1,000 mm Feed speed: 29 - 90 mtr./min

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Deck Oven Quail Piccolo I-3 - Manufacturer: Wachtel - Type: Piccolo I-3 - In-store baking oven with 3 shelves, 1 proofer, 1 exhaust hood - Inner dimensions per floor: 60x80cm, suitable for 1 tray 60x80cm or 2 trays 60x40cm - Each floor can be controlled individually - Each floor with steam function / steam function - Each floor with top and bottom heat, separately controllable - Control: IQ Touch control - Shelf height approx.: 16cm Technical data; - Electrical connected load: 16.4 kW - Voltage: 400 V AC/3Ph/N/PE/50Hz - Year of construction 10/ 2019 - External dimensions approx. : 98x135x202cm WxDxH

An electric deck oven Wachtel Piccolo I-4 DMS3 with 4 shelves each 60x80cm is functionally tested for sale and immediately available. Deck oven Wachtel Piccolo I-4 DMS without steam - 4 shelves each 60x80cm - Each floor with separate controls - Top and bottom heat can be controlled separately - without steam function! - Control: DMS 3 Master - With storage cabinet for trays - With exhaust hood - Shelf height approx. 16cm (see picture) - Year of construction 2007 - 20.8 kW - Voltage : 400V AC/3Ph/N/PE/50Hz Further information and shipping costs on request.

- 5 floors each 60x80 - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box - with proofer - With exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 02 / 2014 - Electrical connected load: 24.97 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

A used electric deck oven Wachtel Piccolo I-6 IQ with 5 shelves each 60x80cm is for sale. The oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-5 IQ Year: 04 / 2018 - 6 shelves each 60x80cm - Each floor with separate controls - With touch screen display - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - with proofer - Floor height see picture 140mm - Height is adjustable - Electrical connected load: 29.4kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 04 / 2018 -Outer dimensions approx. depth 134cm - Height 220cm -Width: 97cm

A used Wachtel Piccolo PRO II-6 deck oven from 2009 is currently for sale and immediately available in stock. - Stone slab oven built in 11 / 2009 - Manufacturer: Wachtel -Type: Piccolo PRO II-6 - 6 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 50.4 kW - Year of construction 2009 Outer dimensions approx: Width: 157cm Depth: 128cm Height: 238cm

Key data: 53500 KW, 11000 V

Diesel Power Plant Wartsila 50 MW with 6 x 20V32 HFO Generator Set The diesel power plant has a total installed capacity of 53.5 MW and comprises six identical Wartsila 20V32 generator sets, each rated at 8.9 MWe (50 Hz). The generating sets are equipped with asynchronous AKV alternators and are designed to operate on heavy fuel oil (HFO). All necessary auxiliary systems are included. Each engine operates at 750 rpm and is turbocharged with intercooling. The engines are mounted on base frames that also function as wet oil sumps. The generator sets have accumulated approximately 35,000 total operating hours and have been maintained in accordance with Wartsila’s service guidelines. Maintenance has been performed by Wartsila Service and a certified service provider specializing in Wartsila engines. Engine cooling is provided by a radiator-based cooling system with two separate co ...

Item condition: in working order Availability: from 31.12.2025 Location: near Hamelin Dismantling: by buyer Number of ovens: 1

Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications, a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations., - Model: Tennant 5680 (battery-powered walk-behind scrubber), - Solution tank: 30 gallons / 114 L, - Recovery tank: 40 gallons / 151 L, - Brush motors: (2) 0.75 hp (0.5 kW), - Brush speeds:, - • Disc: 200 rpm, - • Cylindrical: 750 rpm, - Vacuum motor: 0.8 hp, 3-stage, - Battery system: 36 V (Standard ≈ 240 Ah), - Machine weight (with batteries): ~805 lb / 365 kg, - Noise level: ~75 dBA, - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used, Conditi ...

WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...

Huber WAP (wash press) fully functional incl. control. Material: Stainless steel housing Screw press with perforated screen basket. Application: Treatment of screenings / screenings. Dewatering and volume reduction. Area of application: Municipal sewage treatment plants, industrial sewage treatment plants,

Key data: 19560 KW, 11000 V

Multifuel 19.5 MW Wartsila CHP Power Plant with 2 x 20V34DF (2021) This 19.5 MW multifuel (Gas / HFO / LFO) combined heat and power (CHP) plant is equipped with two Wartsila 20V34DF generating sets and exhaust gas heat recovery boilers. The plant was commissioned at the end of 2022 and has accumulated approximately 20,000 operating hours since new. All operation and maintenance activities have been performed by the Wartsila OEM Service team, ensuring that both the generating sets and auxiliary systems are maintained according to standards and remain in near-new condition. The plant is currently fully operational, available for immediate delivery, and can be load-tested for qualified buyers. The scope of delivery includes complete mechanical equipment capable of producing 19.5 MW of electrical power and 9.5 tons/hour of saturated steam at 10 bar. In addition, the delivery includes an ...

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - / Contact us at -

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...

length: 1200 mm width: 500 mm floor-plate height: 105 mm weight of the machine ca.: 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 8700 KW, 11003 kVA, 6000 V

Natural Gas Generating Set 8.7 MW/50Hz Wärtsilä W20V34SG with auxiliary equipment This 8.7 MW natural gas-fired power plant, manufactured by Wärtsilä in 2007, is in excellent condition. It has only 17,450 total operating hours and has been consistently serviced by Wärtsilä, including the most recent scheduled 16,000-hour service. The plant ceased operation in 2019 and has since been kept in a warm standby state to prevent corrosion. A professional condition inspection was conducted in November 2024, confirming that both the engine and alternator are in perfect condition. The unit is now available for serious buyers. The plant complies with stringent European emission regulations. It is engineered to operate in high ambient temperatures; the high-temperature (HT) cooling circuit uses air radiator cooling, while the low-temperature (LT) circuit is cooled via a cooling tower.  ...

Key data: 3915 KW, 6000 V

Wartsila 3.9 MW/50Hz Gas Generating Set 12V34SG with CHP Auxiliaries This power plant was built by Wärtsilä at the end of 2010 and commissioned in 2011 as a turnkey project, equipped with a heat recovery system for 10 bar steam production. The plant operates on standard natural gas supplied via a local pipeline. It was in operation until 2021, accumulating a total of 43,767 running hours before being shut down. The complete installation includes a step-up transformer, lube oil system, control panels, synchronizer panel, UPS systems, operator monitors, MCC, start-up system, air compressors, HRCS for 10 bar steam, exhaust system, 6 kV vacuum breaker with synchronization, as well as all manuals and technical drawings. The plant remains installed, with electrical power still connected to all devices. All scheduled maintenance was performed by Wärtsilä Service, with the last maj ...

Used deck oven WACHTEL, type: Infra -In bakery condition- - 5 stoves of 1.8 x 0.8 m each - 8m² baking surface - Digital control - Complete in one piece (not disassembled) - Assembly on request - Condition: good, ready for immediate use - Technically everything tested and cleaned The oven is in good condition and is ready for immediate use. On request, we can set up the stove on site. A complete overhaul is of course also possible.

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine.

This 6-axis Warcom LOGICA 1250-60 press brake was manufactured in 2023. Consider the opportunity to buy this Warcom LOGICA 1250-60 press brake. Contact us for more information.

This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.

x-travel: 1100 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 2-axes dividing head (4th and 5th axis) electronical hand wheel 24-fold automatic tool changer coolant through spindle device chip screw measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1100 mm Verfahrweg Y / Y-Travel 650 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1300x600 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/min Gewicht der Maschine ca. / weight ca. 7400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Th ...

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

General SKU430W1394 MakeHermann Waldner LocationBarneveld CEcheck Type46 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity46 l.( 20l) Vessel sizesDia. 450x500 mm Dished bottomcheck ManholeDia. 400 mm Top connectionscheck OutletDN40 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1500 rpm Speed mixing shaft45-55 rpm Information No.5069 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,75x0,90 m Total height2,10 m Weight300 kg Extra Specifications- control panel on the reactor (Plug &: Play) - mirror polishe ...

General SKU430W1392 MakeHermann Waldner LocationBarneveld CEcheck Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4404 (316L) Stainless Steel Reactors Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm Information No.5066 Year of construction2016 Mounted on legscheck and wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &: Play) - mirror polished inside Stainless Steel ReactorsHermann Waldner ...

High-precision lathe DMG Mori Wasino G 100/480 Year of Make: 2017 Control: Fanuc COMPACT line Temperature response (cold start): ø 2.0 μm Roundness: 0.5 μm Technical data: Spindle speed: Drive power: Turning diameter: 285mm Turning length: 280mm Bar Passage: 38mm Travels: X-axis: 480mm Z-axis: 285mm Accessories - 3 pcs of powered tools - Package rigid tool holders - Fire extinguishing system - machine only ran under oil - Chip conveyors

Key data: 250 mm

Walther Rotary Table RTN 250 NEGd + Siemens brushless servo motor IFT6044-1AF71-3AG1 (1pc) used, ready for use

General SKU222W218 MakeWalter Brucks Typeunknown (missing type plate) Mounted on framecheck Main Features MaterialCopper Motor2.2 KW Inlet diameter600 mm Specified Features - Coating pan MaterialCopper Coating pancheck Pan diameter960 mm Pan depth570 mm In-/Outlet600 mm Motor2,2kW, 380Volt Pan speed16 rpm Information LocationBarneveld With switchcheck Floorspace1,3x0,95 m Total height1,5 m Weight260 kgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!