wa notstromtechnik used for sale

roll diameter: 700 mm roll length: 1800 mm rolls drilled: Kernbohrung nip adjustment: motorisch drive power:: -- kW Condition: used Specification: 4-roll L-calender 700x1800 - used - BUZULUK 4-roll L-calender 700x1800 Type: 04706/P1 - Reverse L-shaped roller arrangement - The system was used for the production of PVC films - Film thickness: 0.05 - 1 mm - Can also be used for rubber - Maximum product width: 1,600 mm - Working speed: 6 - 60 m/min - System features roll bending and cross axis - BUZULUK temperature control and stretching device behind the calender - Year of manufacture: 1996 - Consists of 13 stretching and pulling rollers behind the last roller of the calender - The device is supplemented by 4 polishing rolls, - these 4 polishing rolls are temperature-controlled, - all rolls are driven via cardan joints, - all rolls can be temperature-controlled and  ...

Filter WAM WAMFLO FNXB3JO8ZR2624 EX protection tested, control FILCONTROL Housing ø 800 x 1,360 mm, 14 baskets ø 128 x approx. 1300, pneumatic butterfly valve Jacob ø 150 mm Valves overhauled, seals new, new hoses

turning diameter over bed: 360 mm turning diameter over slide rest: 180 mm turning length: 900 mm turning speed range: 25 - 1600 U/min total power requirement: ca. 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,5 x 1 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1 POLYTEX "Waterfall Sample" Mounting Machine type FC, year 2017, semi-automatic "Waterfall" sample mounting machine of modern design for "Waterfall" sample strips. Electronic power traction feed with programmable logic controller (PLC).

1 JAMES HEAL type Wascator FOM 71 MP-Lab Standardised European Washing Machine, approved for IEC and ISO standarts, capacity 7 Kg, power consumption 5,4 KW, voltage 400V, 3N, 50 Hz, material stainless steel, dimensions 740x640x1080 mm, net weight 160 kg, made in Sweden. Machine is in an immaculate condition and looks like new.

General SKU301W572 MakeWab Bachofen TypeKD15 No.740364 Year of construction1973 LocationBarneveld Main Features MaterialStainless steel Volume15 Ltr. Motor22 KW Specified Features - Sand mill Horizontal sand millcheck Capacity15 l Housing dimensions Dia. 220 mm , length 430 mm InletDia. 30 mm OutletdIA. 30 MM Motor22 kW, 3x 500 volt MaterialStainless steel 1.4435 (316L) General Floorspace0,75x1,00 m Total height1,60 m Weight590 kgPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarIndustries > Food & Fe ...

General SKU300U1181 MakePanametrics TypeMagnamike 8000 No.97299607 Year of construction2017 LocationBarneveld Specified Features - Miscellaneous Motor220 volt With jacketcheck General Floor space0,31x0,26 m Total height0,15 m Weight4,6 kg Extra SpecificationsWall thickness measuringComes with tooling, Measuring range bullet diameter 1,6-9,6mm, 0-10,2mmOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicPanametricsIndustries > Food & F ...

General SKU292W971 MakeDynomill LocationBarneveld CEcheck TypeECM-pilot Main Features MaterialStainless steel Volume1.5 Ltr. Motor7.5 KW Specified Features - Sand mill Horizontal sand millcheck Capacity1,5 l Housing dimensions ø 130 x 150 mm Inletø 20 mm Outletø 20 mm With sievecheck With mechanical sealcheck With jacketcheck Motor7,5 kW, 400 V, (Ex), 1445 rpm Rotor speed2895 rpm With pumpcheck MaterialStainless steel 1.4301 (304) With jacketcheck General No.050917 Year of construction2005 With switchcheck Floorspace0,68 x 0,74 m Total height0,58 m Weight400 kg ATEX designedcheck Extra Specificationsmounted on table.cap. 10-200 l/h, cooling water consumption 800 l/hPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsDynomillIndustries > Chemical > Paints & coat ...

General SKU035T174 MakeWaeschle TypeDK 8/250 AC No.6721/03 Year of construction1975 LocationBarneveld Main Features MaterialAluminium/Stainless steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valvecheck Rotary valve for air transport:Blow through rotary valve Alu: Rotor diameter250mm (stainless steel) Rotor width250mm Number of locks:8 Lock sizes250x70mm Inlet220x180mm Inlet flange sizes325x275mm Outlet220x180 Outlet flange sizes325x275mm Installation height400mm With motor0,55 KW, 220/380 Volt, 1400 rpm Rotor speed33 rpm Outside bearingscheck Air purged sealingscheck MaterialAluminium, Stainless steel 1.4305 (303) General Floorspace0,7x0,6 M Total height0,5 M Weight125kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmace ...

General SKU070X400 MakeWaeschle TypeDK-250.1/8-GG No.44533/05 Year of construction1991 LocationBarneveld Material Housing materialMild steel Rotor materialMild steel Main Features MaterialMild steel Motor0.55 KW Inlet diameter250 mm Specified Features - Rotating valve Rotary valve for air transport(1x) Rotor diameter250mm Rotor width200mm Outletdia. 70mm Outlet flange sizesdia. 135mm With motor0,55 KW, 220/380 Volt MaterialMild steel With jacketcheck General Floorspace0,7x0,6 M Total height0,6 M Weight175 KG Extra SpecificationsMax 60 degr CPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valvesWaeschleIndustries > Food & Feed > Powdered foodsIndustries > Pharmaceutical > Gen ...

General SKU285S358 MakeWalter Brucks (D) Type11G No.2619 Year of construction1965 LocationBarneveld Main Features MaterialStainless steel Motor1.1 KW Inlet diameter630 mm Specified Features - Coating pan Coating pancheck Pan diameter1050mm Pan depth670mm In-/Outletdia. 630mm Motor1,1 kW 220/380 Volt MaterialStainless steel General Floorspace1,4x1,2 M Total height1,5 M Weight450 KgStarchSugarConfectionerySolid pharmaceuticsCoating pansWalter BrucksIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherla ...

General SKU416W1313 MakeWam RV TypeRVR052020B00S00 No.1501215145 Year of construction2021 LocationBarneveld Main Features MaterialStainless steel Motor0.55 KW Inlet diameter195 mm Specified Features - Rotating valve Rotary valvecheck Rotor diameterDia. 160 mm Rotor width200 mm Number of locks:8 Lock sizes200x75x60 mm InletDia. 195 mm Outlet200x200 mm With motor0,55 kW, 220-240/380-420 volt, 920 rpm Rotor speed1800 rpm Air purged sealingscheck MaterialStainless steel General Floorspace0,55x0,60 m Total height0,35 m Extra Specifications- with (pneumatic) slide valvePowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchAgrochemicalsSpicesCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsSugarAnimal feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicRotating valvesWamIndustries > Food & Feed > Powdered foodsIndustries > Pha ...

General SKU341U845 LocationBarneveld CEcheck MakeWagner Maschinen GmbH Main Features MaterialStainless steel Motor3 KW Inlet diameter780 mm Specified Features - Bag dump station With hopperPTFE coated Hopper sizesDia:780x550mm Inlet690x940mm OutletDia: 200mm With motor3kW, 230/400Volt, 1430rpm With vibro motor0,18 kW Hopper with flexible wallcheck Bag dump stations MaterialPTFE (Teflon), Stainless steel 1.4301 (304) General TypeSE-MAN/SLSV No.SE-2012 Year of construction2007 Mounted on framecheck With switchgear(as is) Floorspace3 x 1,95 m Total height2,4 m Weight1200 kg Extra SpecificationsIn this dump cabinet, bags can be emptied, and then the empty bags can be thrown to the back of the cabinet, where they are removed by a screw.:Endless disposable bag system:The cone under the dump cabinet is flexible.There is an air cylinder mounted here to knock the mate ...

General SKU430W1390 MakeHermann Waldner Type1450 l. No.5064 Year of construction2016 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume1000 Ltr. Pressure6 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1450 l.( 1000l) Vessel sizesDia. 1200x1500 mm Dished bottomcheck ManholeDN500 Top connectionscheck OutletDN50 Max. temperature-20°C/+200°C With jacketcheck MaterialStainless steel 1.4404 (316L) With jacketcheck General LocationBarneveld Floorspace1,50x1,30 m Total height2,30 m Weight1400 kg CEcheck Extra Specifications- mirror polished inside&:nbsp:- pneumatic outlet valve- no lidGeneric medicinesFine chemicalsOther chemicalBiotechnologyRubberPlastic & polymersPressure vesselsCatal ...

General SKU405W1264 MakeWab Bachhofen TypeKD5 No.780343 Year of construction1978 LocationBarneveld Main Features MaterialStainless steel Volume5 Ltr. Motor12.5 KW Specified Features - Sand mill Ball millcheck Capacity5 l. (4,3l.) Drum sizesdia. 200x320mm InletDia. 35mm Outletcheck Motor12,5 kW, 380 volt, 2930 rpm (EX) Speed2344/1933/1640/1172 rpm Sand mills MaterialStainless steel 1.4000 (410S) General With switchcheck Floorspace1,00x0,80 m Total height1,5 m Weight440 kg ATEX designedcheck Extra Specificationsperipheral speed agitator disks: 15/13/10/8 m/sekPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsWab BachofenIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersIndustries > Chemical > Detergent  ...

General SKU277N321 LocationBarneveld MakeWalter Brucks TypeXI No.4332 Main Features MaterialCopper Motor1.5 KW Inlet diameter1200 mm Specified Features - Coating pan Coating pancheck Batch size± 130 KG Pan diameter1200mm Pan depth650mm In-/Outletdia. 735mm Motor1,5 KW, 380/220 Volt Pan speed3 speeds MaterialCopper General Year of construction1971 With switchcheck Floorspace1,4x1,2 M Total height1,5 M Weight300 KGStarchSugarConfectionerySolid pharmaceuticsCoating pansWalter BrucksIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect t ...

General SKU296U565 MakeWAB-Bachhofen LocationBarneveld TypeKD 45 Main Features MaterialStainless steel Volume45 Ltr. Motor33 KW Specified Features - Sand mill Horizontal sand millcheck Capacity45 Ltr. Housing dimensions Dia: 290x750 InletDia: 30mm OutletDia: 30mm With mechanical sealcheck With jacketcheck Motor33 kW, 380Volt,985rpm (EX) Rotor speed985rpm With ballscheck CapacityCap. range 180-1000 l/h With pumpPonndorf, PX15 Motorcheck Materialstainless steel 1.4721(heat resistant), Stainless steel 1.4306 (304L) With jacketcheck General No.760735 Year of construction1976 With switchgear(as is) Floorspace1,4x1,0 m Total height1,8 m Weight1200 kg ATEX designedcheckPaints & coatingsStarchCatalysts & fillersDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsWab BachofenIndustries > Chemical > Paints & coatin ...

General SKU376X938 MakeWalter Brucks Type8HP No.1530 Year of construction1961 Mounted on framecheck Main Features MaterialStainless steel Motor0.55 KW Inlet diameter640 mm Specified Features - Coating pan Coating pancheck Pan diameter950 mm Pan depth580 mm In-/Outlet640 mm Pan can be tiltedcheck Motor0,55 kW (400 V, 1450 rpm) Pan speed12/20/24 rpm MaterialStainless steel 1.4306 (304L) General LocationBarneveld Floorspace0,8 x 1,2 m Total height1,4 m Weight300 kgStarchSugarConfectionerySolid pharmaceuticsCoating pansWalter BrucksIndustries > Food & Feed > StarchIndustries > Food & Feed > SugarIndustries > Food & Feed > ConfectioneryIndustries > Pharmaceutical > Solid pharmaceuticsCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any dest ...

OVERHAULED - Power: 10,9 / 7,2 kW - Amperage: 49,3 / 32,5A - Voltage: 220V. DC - L x W: 1.600 x 1.300 mm - Conveyor belt: 1.400 mm - AA.: 2.530 mm - With Transformator rectifier from 380V. AC to 220V. DC - Overband separator is sandblasted and painted.

Line for filling delicatessen products into plastic - trays, consisting of:, Vessel filling system, brand Waldner, type 12.3, year 2011, 2-track (two different formats) – however, only single-track operation is possible., Format section 1: Round cup diameter 100mm (including edge) height 80mm and 60 mm, Format row 2: rectangular cup 185mm long 135 mm wide (incl. edge) 35mm deep, The shells are sealed with film from the roll, Roll magazine about 500mm long, 400mm wide, Space requirement Waldner: approx.: 2,100 m 2,100 mm, Discharge belt of Waldner: approx 1,800 mm, Dosing of liquid and free-flowing components:, The plant has two filling heads, which are filled via piping directly from the boiler., The pipe system can be fully purged., The toad line and Maso – Sinus Pump, type SPS 3, are included in the scope of delivery., Feeding of the multi-head weigher using two belt conveyors:, S ...

Starting Air Valve Wärtsila Sulzer From old stock Unused!

Starting Air Valve Air Starter for Wärtsila Sulzer RTA 48T-B Several available

used oven system / deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 shelves, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood ovens Crosta 3.18.20, each 3 shelves (with pellets), with 1 loading and unloading Wachtel Comfort loader (with Wachtel WinServer), built in 2016, in bakery condition, for self-dismantling, ran perfectly until the end

Used Waldner Dosomat 10.4 rotary machine. New: 2011. Voltage: 230/400V AC. Capacity: 8,000–9,600 pieces/hour. Weight: 3,500 kg.

Used Waldner Dosomat 10.4 rotary machine. New: 2005. Voltage: 230/400V AC 50 Hz. Capacity: 7,200 pieces/hour. Weight: 3,500 kg.

CNC portal milling machine TYPE: LF3550/4000CS Year of manufacture: 1966 / overhauled 2010 Manufacturer: Waldrich Siegen Control: CNC840D-Powerline Routes: X-axis 14,000mm table longitudinal Y-axis 4.480mm slider-transverse Z-axis 3,000mm crossbeam vertical W-Axis 300mm Quill Vertical Max. Passage: transverse 3.200mm high 3.800mm Machine table: Length 14.770mm Width 3,100mm max. table load: 145 to Quill: Tool Taper: ISO60 Power: 100KW Max. torque: max. speed 600 rpm Rapid traverses: X-axis 12m/min Y; Z-axis 6m/min Attachment heads: Voltage: manual Description: Right angle milling head (ISO60) Orthogonal milling head (ISO60) Notes: Table guide hydrostatic

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Deck Oven Quail Piccolo I-3 - Manufacturer: Wachtel - Type: Piccolo I-3 - In-store baking oven with 3 shelves, 1 proofer, 1 exhaust hood - Inner dimensions per floor: 60x80cm, suitable for 1 tray 60x80cm or 2 trays 60x40cm - Each floor can be controlled individually - Each floor with steam function / steam function - Each floor with top and bottom heat, separately controllable - Control: IQ Touch control - Shelf height approx.: 16cm Technical data; - Electrical connected load: 16.4 kW - Voltage: 400 V AC/3Ph/N/PE/50Hz - Year of construction 10/ 2019 - External dimensions approx. : 98x135x202cm WxDxH

An electric deck oven Wachtel Piccolo I-4 DMS3 with 4 shelves each 60x80cm is functionally tested for sale and immediately available. Deck oven Wachtel Piccolo I-4 DMS without steam - 4 shelves each 60x80cm - Each floor with separate controls - Top and bottom heat can be controlled separately - without steam function! - Control: DMS 3 Master - With storage cabinet for trays - With exhaust hood - Shelf height approx. 16cm (see picture) - Year of construction 2007 - 20.8 kW - Voltage : 400V AC/3Ph/N/PE/50Hz Further information and shipping costs on request.

- 5 floors each 60x80 - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with separate steam box - with proofer - With exhaust hood - Floor entrance height top floor 20cm - Floor entrance height lower 4 floors each 14cm - Year of construction: 02 / 2014 - Electrical connected load: 24.97 kW - Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions approx.: 118cm width 116cm depth without exhaust hood 230cm height

Wire gauge range: 1.5 - 7.0 mm Section lengths: max. 1,000 mm Feed speed: 29 - 90 mtr./min

Load capacity: max. 1,500 kg. Wire gauge range; 0.5 - 6.0 mm Coil diameter: max. 1,000 mm Speed: 0 - 80 rpm,

Load capacity: max. 1,500 kg. Wire thickness range: 0.5 - 9.0 mm Waistband-outer diameter. max. 1,000 mm Waistband-inner diameter. min. 300 mm Speed: 0 - 80 rpm

Wire gauge range: 1.5 - 7.0 mm Section lengths: up to 8,000 mm Feed speed:

A used electric deck oven Wachtel Piccolo I-6 IQ with 5 shelves each 60x80cm is for sale. The oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Shipping costs on request. Deck Oven Quail Piccolo I-5 IQ Year: 04 / 2018 - 6 shelves each 60x80cm - Each floor with separate controls - With touch screen display - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - with proofer - Floor height see picture 140mm - Height is adjustable - Electrical connected load: 29.4kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction 04 / 2018 -Outer dimensions approx. depth 134cm - Height 220cm -Width: 97cm

A used Wachtel Piccolo PRO II-6 deck oven from 2009 is currently for sale and immediately available in stock. - Stone slab oven built in 11 / 2009 - Manufacturer: Wachtel -Type: Piccolo PRO II-6 - 6 floors - 120cm wide and 80cm deep on each floor - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 50.4 kW - Year of construction 2009 Outer dimensions approx: Width: 157cm Depth: 128cm Height: 238cm

Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications, a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations., - Model: Tennant 5680 (battery-powered walk-behind scrubber), - Solution tank: 30 gallons / 114 L, - Recovery tank: 40 gallons / 151 L, - Brush motors: (2) 0.75 hp (0.5 kW), - Brush speeds:, - • Disc: 200 rpm, - • Cylindrical: 750 rpm, - Vacuum motor: 0.8 hp, 3-stage, - Battery system: 36 V (Standard ≈ 240 Ah), - Machine weight (with batteries): ~805 lb / 365 kg, - Noise level: ~75 dBA, - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used, Conditi ...

WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

temperature max.: ° muffle size (length): 0 muffle size (width): 0 muffle size (depth): mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU293X467 MakeMiele TypeG7826 No.00/74340434 Year of construction2009 LocationBarneveld Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous Motor10 kW, 400 volt MaterialStainless steel General Floor space0,90x0,80 m Total height1,95 m Weight505 kg CEcheck Extra Specificationsusefull size inside chamber: 600x560x650 mmOils & fatMiscellaneousConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsE-waste & metalFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalAPIPlastic & rubberMinerals & inorganicMieleIndustries > Food ...

Manufacturer: Wagner Type of machine : Powder Coating System Year of Manufacture: 2000 The powder system consists of the following individual components: - 1x Powder coating booth – FBC – plastic booth with discharge conveyor - Cabin extraction system – 1x monocyclone 1x closed post-filter - 2x powder collection containers - 1x Powder Center - PZ - 2008 with its own extraction system - 8x Automatic Powder Guns – PEA – T2 - 2x hand powder guns – PEM – T2 - Control unit for automatic pistols – 8x PM 401 pneumatic module 1x PG 650 control module - 2x Control for handguns – EPG – 2007 in Tribo mode - 2x lifting devices – EBA – 3 - 2x electric sliding unit – VT – 1400 - Light strips – height + gap + depth - 1x external safety device – fire detection (Minimax company) - Find more here - .ucymachines/ Contact us at - sales@ucymachines

Used deck oven WACHTEL, type: Infra -In bakery condition- - 5 stoves of 1.8 x 0.8 m each - 8m² baking surface - Digital control - Complete in one piece (not disassembled) - Assembly on request - Condition: good, ready for immediate use - Technically everything tested and cleaned The oven is in good condition and is ready for immediate use. On request, we can set up the stove on site. A complete overhaul is of course also possible.

Features Volume 60200 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 7700 mm Height 5330 mm Diameter width 3500 mm Weight 3500 kg Surface inside 2B=IIIC ground Surface on the outside semi-marbled Description Topsoil: Clapper bottom 2 crane eyes Threaded welding nozzle DN 100 to DN 40 Sprinkler ring Vent nozzle DN 50 (airlock) Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 350x450 mm Sample tap DN 15 Ladder hook at the top Dip Shank Sleeve DN 15 for Temperature Display Downward-swept CIP cable with vent cable DN 40, with connection thread DN 50 according to DIN 11851 Clear drain with angled seat valve DN 50 Cooling line CIP Ball Underbody: Clapper bottom Forward-drawn curved surround with angled seat valve DN 50 - outlet pipe DN 100 reduced to DN 50 with flange  ...

This lathe was manufactured in 2017. The DMG MORI WASINO G 100 | 300 features a maximum turning diameter of 285 mm and a standard diameter of 60 mm. It supports bar work up to 38.1 mm and offers rapid traverse rates of 12000 mm/min on the X-axis and 20000 mm/min on the Z-axis. With a spindle speed up to 6000 min⁻¹, this machine is ideal for efficient operations. For more information about this lathe, please reach out to us.

This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information.

This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.

General SKU430W1394 LocationBarneveld CEcheck MakeHermann Waldner Type46 l. Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume20 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity46 l.( 20l) Vessel sizesDia. 450x500 mm Dished bottomcheck ManholeDia. 400 mm Top connectionscheck OutletDN40 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1500 rpm Speed mixing shaft45-55 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5069 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,75x0,90 m Total height2,10 m Weight300 kg Extra Specifications- control panel on the reactor (Plug &:amp: Play)- mirror polished insideGeneric ...

General SKU430W1392 LocationBarneveld CEcheck MakeHermann Waldner Type238 l Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume150 Ltr. Motor0.37 KW Specified Features - Bioreactor Reactorcheck Capacity238 l. (150l) Vessel sizesDia. 750x800 mm Dished bottomcheck Top connectionscheck OutletDN50 With jacketcheck Max. temperature-20°C/+200°C With propellor stirrercheck Motor0,37 kW, 400 volt, 1430 rpm Speed mixing shaft130-140 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.5066 Year of construction2016 Mounted on legsand wheels With switchgearcheck Floorspace0,93x0,96 m Total height1,80 m Weight500 kg Extra Specifications- control panel on reactor (plug &:amp: Play)- mirror polished insideGeneric medicinesFine chemicalsBiotechnologyAgrochemica ...