wa notstromtechnik used for sale

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening Machine equipped for tooling: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T

max. load: xxx N 0: 270x160x85 mm weight: 13,5 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This shredder has a large diameter rotor (30 cm) and 12 rotating blades. The motor has an output of 4 kW. This shredder is equipped with a torque increase gear (reducing gear), so it is also suitable for shredding thicker plastic waste. The grid is interchangeable, so the grain size can be changed. Everything works fine, motor, bearings, gearbox, rotor, blade are all fine. It can be used immediately. I have several of them. Other shredders are also for sale. Please see my other ads.

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Sorbini / Tagliabue, Type: Walzstrasse, Year: 1998, Work piece width min-max mm: 1.300, Min.-max. workpiece height in mm: 3 - 80 , Min.-max. workpiece length in mm: 300, Feeding speed min-max m/min: 6 - 24, Inlet conveyor: yes, Lackwalze 1: T/20-MF, UV Trockner 1: 1 Lampe, Lackwalze 2: T-20-MF, UV TRockner2: 3 Lampen, Lackwalze 3: T-20MF, UV Trockner 3: 3 Lampen, Paint sander: TAG 13KS DPSTRA, Paint rollers: 3, Year :1998

Manufacturer: Wandres, Type: CH 29/1100/2750, Year: 2002, Dust removal brush: yes, Number of units: 2, kW Leistung Motoren: ca 2, Units mounted upright: yes, Working width mm: 2.750, Year :2002

Manufacturer: Wagner, Type: Finisch 500, Year: ca.2005, Wasserbasierend Lacke: yes, 2K-Lacke möglich: yes, Elektr. pump: yes, Laquer reservoir litres: ca.10 Liter, Flushing circuit: yes, Movable: yes, Spray gun manufacturer: Wagner, Spraying stations: 1, Fast exchange system spray gun carrier: yes, Laquer circles: 1, Laquer system - airless: yes, Electrical power consumption kW: 2,8, Transmission ratio: 250 bar, Conveying output l/min: 5,7, Delivered checked: yes, Wight approx. kg: 52, FREE TEXT: 220 Volt/2,8 Kw/Gewicht 52 Kilo/zusätzliche Schläuche/2 Stück Sprühlanzen/ , Year :ca.2005

Manufacturer: Wamhoff, Type: Luftkissentisch Rückführung, Year: ca.1998, Control: hand, Conveyor belts Qty: 4000, Belt width 1 mm: 880, Conveyor belt 2 mm: 2790, Belt width 2 mm: 860, Conveyor belt 3 mm: 4000, Belt width 3 mm: 600, for left machine: yes, Workpieces are rotated: yes, Working hight adjustable mm: 880-950, Luftkissentisch pneumatisch: yes, Angular transfer: yes, Drain roller operation: yes, Year :ca.1998

Manufacturer: Walther + Cefla UV, Type: Pilot Signier + UV 2000, Spraying line: yes, Work piece width min-max mm: 1300, Spraying machine: Walther, UV dryers - 4 lamps (number): 1,

Manufacturer: Wagner, Type: GM 200, Spraying heads - total: 1, Compressed air bar max: 250, Laquer reservoir litres: 20, Spray gun manufacturer: GM 2000, Spraying stations: 1, Laquer circles: 1, Laquer system - airmix: yes, Electrical power consumption kW: 0,76, Wight approx. kg: 32,

Thread milling and hobbing machine Wanderer 31 NU Machining length 3000 mm With accessories

Inv. Num. : 3483 Type: HELICHECK Producer: WALTER MASCHINENBAU Created: 2004 Parameters: The machine is in good technical condition and energized Accessories: Hydraulic clamps SK50

Eckold Kraftformer; motorised machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening For Aircraft production and Maintenance. For Car body shop specialists For Artisans and Craftmen Equipped with tool storage shelf in side column Machine equipped for tooling: FWR 402S FWA 403S  

Volume of work tank 200 l Usable volume 125 l Max. workpiece (diagonal) 170 mm Screening area 2190 cm² max. centrifugal force 49,000 N There are 2 lifts available!

Vibrating plate DPU, Technical specifications:, Year of construction: 1997

Bagger Minibagger

Deck Oven Quail Piccolo II-4 Proofer Deck Oven Quail Piccolo II-4 - DMS3 Master EM Timer - 4 floors - 120cm wide and 80cm deep on each floor - 2 trays 60x80cm fit next to each other on each floor or 4 trays 60x40cm - With fixed water connection - each floor is equipped with separate swash box - Each floor with separate control - Top and bottom heat can be controlled separately - Oven can be moved on castors - Master control - electr. Connected load 35.3 kW - Year of construction 03 / 2009

Used-refurbished machine Unger 160 mm cutting attachment 4500 kg/h max. capacity Technical data Mixing chamber volume: 400 L Capacity approx.: 4500 kg/h Power: 35 kW (grinder motor) Electrical fuse: 125 A Dimensions: 1500x1335x1810mm Weight: 1700 kg WAW G 160 model 2000 S with mixing arm, hydraulic loader for 200 l hopper, push button operation, mixing arm, hopper volume 400 l, mixing capacity approx. 260 kg, machine weight approx. 1700 kg, hole plate diameter 160 mm, max. capacity 4500 kg/h, brand new cutting set with sorting and separating device (bone removal accessory).

Waldner DOSOMAT 2.2 Rotary Cup Filling Machine Reliable rotary cup filling machine designed for automatic filling and sealing of semi-liquid food products in round cups. The Waldner DOSOMAT 2.2 offers efficient rotary operation and was completely overhauled in 2015, making it a dependable solution for dairy and food processing lines. General Information - Manufacturer: Waldner - Model: DOSOMAT 2.2 - Machine Type: Rotary, single-lane, double-cycle - Year of Manufacture: 1998 - Refurbishment: Completely overhauled in 2015 by GPS Reisacher - Electrical Panel Update: 2016 by Henkenjohann GmbH - Condition: Excellent used condition - Usage After Refurbishment: Used only for testing purposes - Origin: Switzerland - Current Location: Sharjah, UAE - Production Status: Ready for immediate installation - Warranty: Sold as-is, without warranty Machine Dimensions and Weight - Di ...

We are offering a complete Water-Cooled Induction Leveling System, composed of the following components: 1. Electrical Power Unit - Power Supply: 3 x 400V, 50/60 Hz - Current (In): 50 A - Short-Circuit Current (Icc): 35 kA - Item: 01 - Type: IFC/A-25 (25 kW / 20 kHz) - Year: 2023 2. Inductor Unit - Manufacturer: ATE - Drawing: 239003100_0 - Item: 03 - Year: 2023 - Type: INDUKTOR RECHTS (Right Inductor) 3. Chiller Unit - Manufacturer: M.T.A - Model: TAEevo TECH 051 - Production Year: 2023 - Voltage: 400V / 3Ph / 50 Hz - Power Consumption: 8.8 kW - Current: 10 A - Protection Class: IP54 - Refrigerant: R410A - Charge: 2.088 kg - Global Warming Potential (GWP): 2088 - Cooling Capacity: 32.0 kW (EWT 20°C, LWT 15°C) - Water Flow Rate: 5.5 m³/h - Water Connections: 1 1/4 - Weight: 239 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Eillert washer for sinking products

Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min

workpiece diameter: 25-90 mm threading length: 3000 mm thread pitch: 2-16 mm total power requirement: 25 kW weight of the machine ca.: 10,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. temperature: 420 Grad size of opening: 200 mm depth of chamber: 350 mm total power requirement: 2,5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible.

length of reeling-pattern: 0 internal dia. of stator: 0 packet hight: 0 mm wire dia.: 2,5 mm working area: 45 x 1650 mm total power requirement: 5 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WANGEN PUMP TWIN 104 Used Wangen TWN 104 hygienic twin-screw pump manufactured in 2014. Mobile unit with variable-speed electric drive, suitable for high-capacity transfer of liquid, viscous and sensitive products. The contact-free twin-screw pumping principle reduces shear forces and helps protect the consistency, structure and appearance of sensitive products The pump offers high suction performance and reversible operation, making it suitable for tank emptying, loading, unloading, recirculation and product recovery The wide operating-speed range allows the pump to handle both process products and cleaning liquids. The pump is mounted on a mobile support frame and equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs Technical Data - Maximum product temperature: Up to 130°C - Maximu ...

WANGEN PUMPS, TW IN 70 Used Wangen TWN 70 hygienic twin-screw pump manufactured in 2014. Mobile unit equipped with an electric motor and variable-speed drive, suitable for the gentle transfer of liquid, viscous and shear-sensitive products. The unit is mounted on a mobile support frame and is equipped with an electric motor, local variable-speed inverter and stainless-steel sanitary process components, as shown in the photographs. The wide operating-speed range allows the same pump to be used for both product transfer and CIP circulation, subject to the installed drive, seals and specific configuration. Technical Data - Maximum viscosity: Up to 1,000,000 mPa·s / cP - Maximum particle size: Approximately 20 mm - Maximum flow rate: Up to approximately 25 m³/h at 4,000 rpm - Maximum differential pressure: Up to 16 bar - Maximum product temperature: Up to 130°C -  ...

x-travel: 6000 mm y-travel: 3500 mm z-travel: 1500 mm Control: 840 D table load: 12 t height over floor: 6300 mm table dimension - longitudinal: 5000 mm table dimension - cross: 2500 mm tool change unit: 200- fach weight of tools max.: 30 kg tool taper: HSK A 100 tool diameter: 250 mm tool length - max.: 500 mm spindle speed:: 5 -6000 U / min c-axis: -10 bis 370 ° b-axis: 5 bis -95 ° column daylight: 3000 mm total power requirement: kW weight of the machine ca.: 161 t dimensions of the machine ca.: 20,5 x 11 x 6,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 200 mm roll length: 400 mm rolls drilled: Peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monoblock laboratory rolling mill 200 x 400 mm - new - Roller diameter: 200 mm - Roll length: 400 mm - Roll bore: peripherally drilled - Individual drives: variable friction ratio - Roller bearings: roller bearings with manual grease lubrication - Gap adjustment: hydraulic - Gap adjustment: approx. 1 - 20 mm, during normal operation operation - Speed range approx.: 2.5 - 19.5 rpm - New hydraulic unit for roller gap and emergency system emergency system - New Johnson-Fluiten rotary joints - two adjustable guide plates Tecafine PE5 Natural to reduce the working range. - Working range approx.: 100 to 360  ...

roll diameter: 250 mm roll length: 500 mm rolls drilled: peripher Nip adjustment: hydraulisch total power requirement: 2x 5,5 kW Condition: new rolling mill, with CE marking, with 2 year warranty Specification: Monobloc laboratory rolling mill 250 x 500 mm - new - roll diameter: 250 mm - Roll length: 500 mm - Roll bore: peripherally drilled - Single drives: variable friction ratio - Roller bearing: roller bearing with manual grease lubrication - Gap adjustment: hydraulic - new hydraulic unit for roller nip and emergency system - New rotary unions make Johnson-Fluiten - two adjustable guide plates to adjust the working range on the rollers. - Working range approx.: 100 to 460 mm - Roller gap, during the working phase 25 mm - tiltable guide plates made of nylon-polyethylene Material - Stainless steel tank - New saf ...

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled DIN EN 60974 -Length: 6.5 m -Connector: 4-pin -Transport dimensions: 400/400/H100 mm -Weight: 3.1 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 4 m -Connector: 5-pin -Transport dimensions: 340/340/H100 mm -Weight: 2.4 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.4 m -Connector: 2-pin -Transport dimensions: 400/400/H100 mm -Weight: 4.1 kg

An old rectangular ball mill for barrel and dip finishing of mass-produced articles is available. Process: Deslagging/deburring, filling weight range: approx. 30kg-50kg, drive: belt-driven, machine length: approx. 1200mm. On-site inspection is possible.

1,000 litre hot water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 2600 mm Cylinder height 1100 mm inner diameter 1000 mm Outside diameter 1120 mm Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2013 Design vertical Last use chemical industry Insulation 60 mm Operating temperature range 20-95°C Description MJ UNI-HIGH Topsoil: Flat floor with 3% slope crane eye Manhole DN 400 2 x connection CIP cleaning with line Connection Tank cylinder: Ladder hook Level measurement Underbody: Residual drain pipe with T-piece with 2 butterfly valves 3 fixed feet with domes

Properties: Volume 24000 L Year of manufacture 1976 Overall length 4400 mm Cylinder length 3400 mm Total height 4000 mm Diameter 3000 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball Cathedral In front: Manhole 520 x 410 with sample tap Filling line Flange 200/219.1 DIN2632 PN10 WNR 1.4541 68715 Residual drain with outlet surround with disc valve DN 60 Below: 4 fixed feet with reinforcement ring

Properties: Volume 35000 liters Total length 6500 mm Cylinder length 5500 mm Diameter 3400 mm Material V2A (AISI 304) 1.4301 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Insulation 200 mm Horizontal design Number of feet 6 Last use nitric acid - in dairy operations Description: MJ UNI-HIGH Tank crest: Supply pipe CIP Ball 2 x Small Connectors Fill measurement connection In front: Manhole 520 x 410 with sample tap Filling line Flange Residual drain with outlet surround with disc valve DN 60 Below: 6 fixed feet with reinforcement ring

1,000 liter water tank/storage tank Characteristics volume 1000 L material V2A (AISI 304) 1.4301 Total height 1800 mm Cylinder height 1100 mm diameter 1000 mm Weight 170 kg Outside surface 2B=IIIC ground Surface inside 2B=IIIC ground Year of construction 2008 Design Vertical Last use chemical industry Description: MJ UNI-HIGH Topsoil: flat bottom Dome DN 400 Connection Underbody: Remaining process 3 feet with domes

approx. 235 pieces order picking trolleys, Wanzl, 2 sizes – used - : Price for partial quantities (2 intermediate floors per car): Up to 30 pieces: 195.-€ (net) / piece Up to 60 pieces: 185.-€ (net) / piece Up to 120 pieces: 175.-€ (net) / piece Minimum order: 10 pieces Price for complete acceptance: 35.000.-€ (net) incl. loading! The special price is only valid for pick-up until week 41/2026! Type: KT3 1297 Type: KT3 1713 Manufacturer: Wanzl Type: KT3 1297 Year of manufacture: different e.g. 2012 / 2018 Load capacity: 300kg Load capacity per floor: 50kg Most of the cars are 1300 meters long. Some of the wider ones also have 1700 lengths. approx. 185 pieces are all wide (60cm deep) approx. 50 pieces are narrow The equipment with intermediate shelves is sometimes very different (see photos), on average there should be at least 1 – 2 interm ...

Constructed according to the high Italian quality standards, Made in sturdy carbon steel welded structure Flat bottom with horizontal screw and doctor blade, or conical bottom with diagonal screw (depending on project requirements) plexiglass inspection window, Electric motor bespoke to project material and size paddle type minimum level indicator Bolted inspection door, Safety devices, CE compliance, drawings, user manual, Can be integrated with our [DRYING SYSTEM](.germanplast.eu/listings/4115725-drying-system-for-vertical-mi xers), price options: size and shape bespoke to project

Waco planing line HM-225 with bundling and stacking, High speed planing line 120 m/min with de-stacking and infeed system, outfeed with bundling and automatic stacking system, Consisting of:, - Infeed with tilt hoist, - Unscrambler, - Automatic infeed system, - Waco moulder, type HM-225, 9 spindles: B-T-B-R-L-R-L-T-B, max. 120 m/min, - Outfeed with buffer conveyor, - Semi-automatic bundle, - Mosca strapping machine, - Stacking system, - Outfeed for wood packages

grinding diameter: 140 -1260 mm grinding length: 5000 mm swing diameter: mm centre height: 1000 mm centre distance: 8000 mm grinding wheel size: 800 x 80 x 305 mm Control: Allen Bradley PLC workpiece weight max.: 35000 kg spindle drive: 30 kW grinding wheel turining speeds: 720 - 1800 U/min feeds of grinding head: 60 - 4000 mm/min grinding feed: 0,0125 mm/U working spindle drive: 45 kW work piece spindle speed: 240 - 2400 U/min total power requirement: - kW weight of the machine ca.: - t 2008 Electrical Upgrade Computer Controlled Allen Bradley Powerflex Digital Drives Allen Bradley 1606-XL Power Supply N-Tron 508 XT Ethernet Card Allen Bradley Panelview Plus 1250 Digital Readouts Allen Bradley PLC CompactLogix L32E - Crowning and Cambering Capabilities - Stationary Rotating Roll with Travelling Grinding Carriage - 2 Steadies - Servo Drives: Headstock & Grinding Wheel, - Rapid Traverse C ...

An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible.

Workbench parallel Lathe WABECO 10200 Between points: 500 mm Maxi Ø on bench: Ø 200 mm Maxi Ø over saddle: Ø 120 mm Spindle diameter: Ø 26 mm Spindle speed: from 10 to 1000 RPM (on electronic dimmer) Square/ tilting turret 3-jaws chuck Ø 100 mm Year of construction: 2001 Tailstock CM2 Longitudinal auto feeds Supplied with the gears (see photo) Supplied without the table Voltage: 220 V mono Dimensions (L x W x H): 1200 x 300 x 450 mm Weight: approx 100 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Connector: 4-pin -Transport dimensions: 400/400/H90 mm -Weight: 3.2 kg

MIWE Gusto with analogue control and water tank. 230V plug

WAFIOS CNC winding and bending machine Type FTU5.3-98 Year of manuf. 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm WAFIOS CNC winding and bending machine Type FTU5.3-98 Built in 1994 with additional bending head, servo motor and straightening rollers for diameters from 2 mm to 12 mm