129,504 used machines on RESALE, but how to find them? Machine Search
WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...
Key data: 2800 KW
ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...
Hello all, We have in our stock in Istanbul Turkey 3 Wartsila W32 Cylinder head covers in almost brand new condition (slightly used) Standart exhaust seat bores, No cracks or wielding Water pressure tested With reports available Please contact us at info@fin-marine.com Regards
Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...
I sell the moulding heads for the automatic fourside moulder WACO Weinig Gruppe. Inside diameter 50mm Outside diameter (with knives) 170mm Body diameter 155mm 15 pcs. working length 200mm (without knives). 8 pcs. working length150mm (with knives) Each with Hydro holding. Price per pc. 500 euros. Sellable per pc. or totally together. Available immediately.
Gebr. Confectioner's oven Quail Mini Piccolo 4 ECO, overhauled, 4 floors for sheets 60 x 40 cm, on stone, stove height 14 cm, DMS 3 Master Timer, with cooking chamber, Fabr.-Nr. 19486, 17.8 kW, 400 V, 50 Hz
FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
new
Rollers for SM 52-2 2 new application roller d 64.5 _____250 EUR /pcs. 2 new application roller d 61 _____244 EUR / pcs.
Dear's Sale, used 4 diesel engine WARTSILA 12 ZAV 40 S Brgds Hakan KUSCU +905323642509
Dear's Sale, used 2 complete engine WARTSILA 6R32D Brgds Hakan KUSCU +905323642509
I sell a tenon machine for parallel milling, grooves for pallet tape etc. WACO T2-SL Year of construction 1984. Groove width 30mm. Motor 3,3kW Made in Germany. Available the same. With dokumentazion.
Wärtsilä Lipstronic thruster control system overhauled. W006927795 Lipstronic 793.083.001.0001 Printcard Thruster Control System
Stainless steel Crank drive Movable mixer Dispenser for preparations Suitable for wall hanging Dimensions 40 × 34 × 59.5 cm
750-841,750-474,750-430 (5x),750-461,750-602,750-530(3x),750-600(2x),750-614 ,/50-404 1000 003(2x),750-404 1000 004(2x),750-602
Hello all We have 8 X Wartsila 12V32 LN engines available Year of build is 2007 In very good condition Also all major parts are available such as: Pistons, Liners, Cylinder heads, Con rods, Crank shaft Please contact us at : info@fin-marine for more info
Motor cable reel Manufacturer : Wampfler Type : EB040625-W100.3/40/10-90-HMK8/KN90L4 Free sag, drum on the mobile device Speed 30m/min. m. 50 mtr. Cable 4x16 mm² Condition : New, may have slight scratches/marks, comes from stock. Scope of delivery/information : see the pictures. Internal No.: Werkst. EG R2 P16 Werkst. EG R2 P18 Werkst. EG R1 P06
Progressing cavity pump Manufacturer: Wangen Type: KL 505S-50.4 Item #: 900,588 Year of construction: 1995 Pressure: 4-10 bar very good condition with plug & on-off button LBH: 2800 x 300 x 320 mm
In-store oven Quail Mini Thermic Plus 10 - Quail Mini Thermic Plus 10 hot air oven - Ovens 5+5 controllable - for 5 + 5 baking trays 60x40cm - Door stop on the right - elek. Power supply: 18.2 kW - with proofing cabinet - Control: Shopmatic 5 Plus Timer - 400 Volt AC /3Ph/N/PE/ 50Hz - Year of construction 10 / 2008
Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Waldner Dosomat 12.6 filler and sealer for foil trays. Currently set up for using 82mm diameter foils for meat paste like pate or pet foods. Machine is in lovely condition and available for inspection.
Rated power at 50%ED: 20kVA Short-circuit current: 11.6kA Electrode force: 180daN Projection: 455mm Arm distance, stepless: 173-410mm Electrode cone: Mk1 --- Welding control: WS 402 (4 times, 2 program) --- Incl. additional options: - Foot switch - Main switch - 3m connection cable and Cekon plug 32A --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock
New Tesla experimental set from Wassermatix
Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.
Extraction dedusting Walther NOVA 2000 with 2 extraction arms mobile on wheels 2 pieces available Very good operational condition!
Cutting machine for rolls Wabäma complet in chrome steel Horizontal cutting machine Max cutting compound: Width: 135 mm Height: 50 mm with infeed and discharge conveyor New: Teflonized knife, conveyor belt Pressure belt and conveyor belt Mass: Length: 1900 mm Inlet height: 1000 mm Depth: 700 mm Connection: 380 V Condition: very good, Repaired
LADENOFEN RUSTIKAL - GEBRAUCHT. FÜR WEITERE INFORMATIONEN KONTAKTIEREN SIE MICH BITTE
Brotschneidemaschine verwendet. Sehr guter Zustand.
WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system
Since we have focused our -fischer organics- laboratory service more on peptides / HRMS, we would like to hand over our SFC. The system has the complete equipment, The original price in 2012 was over 250,000 euros net! - Mass detector QDa - Backing pump RE6 - Acquity PDA detector - Acquity Pillar Manager - Acquity Binary Pump 1000bar - Acquity Autosampler - Isocratic UPLC pump - Convergence Manager
Electromagnet with large depth action for extracting ferrous parts from a material stream, oil-cooled design. Including control cabinet with 22 V DC power supply (type: 312-220/20, for connection to 400 V / 50-60 Hz) and overhead duo-rail installation (ca. 4.5 m long x 2.5 m high) for moving the magnet. By switching off the magnet above the drop point attracted ferrous parts are removed.
amount: 1 STK The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Wartsila L32 cylinder heads Brand new condition With BV class certificate 8 Pcs available In our stock in Istanbul Turkey
Qty. 1 Second-hand wall paper production line – already dismantled & in warehouse Mfc.: Shin Shang Built: 1998 New electrical incl. cables in 2019 Production stopped in 2/2023 In line system Printing width: 850 mm 6 colors printing station Hot embossing system PVC coating system Six colors high speed paper roll CI flexo printing machine Automatic high speed flexo printing machine High speed CI type Central Drum 6 Colors Flexographic Printing Machine for paper OPP/ BOPP/ PP plastic film rotogravure printing machine
Gear motor Flender MBH 125CC-B 27.7/1 Bevel helical gear drive motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Matching Freqenzumrichter Walther Flender ZZ0103069.34003 Sinus Penta available A total of 15 traction motors and 12 drives ! available Very good condition, straight from production!
WAGNER FCU 1600 universal milling machine manufactured in Germany in 1998 is designed for precision machining of workpieces in X,Y,Z axes with feeds of 1200 mm (X axis), 700 mm (Y axis) and 500 mm (Z axis). The machine characterised by its high reliability and efficiency performs the milling of workpieces on a large work table with a length of 1600 mm and a width of 500 mm using a precision spindle rotating at a maximum speed of 2050 rpm. The milling machine is also equipped with measuring rulers and digital readouts. The total weight of the machine is 4000 kg. Technical data of the WAGNER FCU 1600 milling machine - feed rates in the X/Y/Z axis: 1200/700/500 mm - feed speed in the X axis: 10-1000 mm/min - feed speed in the Y axis: 10-1000 mm/min - feed speed in the Z axis: 5-500 mm/min - rapid traverse in the X/Y/Z axis : 3000/3000/1500 mm/min - working table dimensions (L x W): ...
WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor
diameter range 7-12 mm cutting length 6000 mm
Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition
maximum number of results exceeded
please refine your search
