wa 80 used for sale

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

MARINE GEARBOX Reference number 20129 Brand Gearbox REINTJES Model Gearbox WAF 560 Ratio 5,05:1 Power 720 RPM 1800 Serial number 54445 General condition TAKEN OUT RUNNING Status AVAILABLE SPECIFIC INFORMATION Sae housing 30 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES Pto NO Weight (kg) 1280 KG

Wabäma WSG CLASSIC 460/11 Bread cutting machine / Bread gate 10mm Y.O.M. 1999 Condition: Used as available Manufacturer Wabäma GmbH Model: WSG Classic 460.11 230 V / 3.4 A /0.75 kW Weight: approx. 175 kg Dimensions: approx. 62 x 68 x 128 cm Visit possible at any time on site.

Тype: WALDYSSA AUTOMAC 45 Model: B 223 XL Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: Length: 245,0 сm Width: 170,0 сm Height: 170,0 сm Voltage: 380 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

Тype: WALDYSSA 33 Stretchfilm wrapping machine Маx. trays dimensions L x B x H: 300 x 200 x 160 mm Мin. trays dimensions L x B x H: 110 x 90 x 10 mm Capacity: max. 28 trays / min Machine dimensions: Length: 2500 mm Width: 1450 mm Height: 1500 mm Voltage: 380 V, 50Hz Power: 2,6 kW Machine weight: 350 kg

Тype: WALDYSSA AUTOMAC 45 Model: B 223 ZR Stretchfilm wrapping machine Product dimensions in mm.: A: 120 min., 320 max. B: 120 min, 230 max. H: 10 min., 200 max. Capacity: up to max. 42 trays / min. Film type: shrink stretch Film dimensions in mm: L x S: 300, 250 min. L x S: 600, 700 max. Machine dimensions: length: 190,0 сm width: 170,0 сm height: 150,0 сm Voltage: 400 V, 50Hz Power: 3,9 kW Machine weight: 500 kg

Push-mast forklift, high-bay forklift used Manufacturer: STEINBOCK BOSS Type: WA15R-19130 MK II A-1 Built: 1999 Operating hours read: 10747 Callable capacity max 1000 kg Lifting height: 8750 mm Weight without battery: 6550 kg Battarie 80V 4 PzS 620 kW13/2019 Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Very Good Condition Wartsila V32 Cylinder Head for Sale

Very Good Condition Wartsila V32 Block for Sale

Slicer WABÄMA: knives thickness 9 mm, new knives; power 0.5 kW/380V semi-automatic lubrication; automatic adjustment of the height at the upper plate of bread;

Reference number 20153 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

Conveyor belt incl control (speed control) Tread Length 105cm Width 20cm Height

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

A)01 Karl Mayer Direct Warper – ZM – SP 1700/1000 year 1997, working width 180 cm, Max. Beam Flange Diam. 1,016 mm with 01 Karl Mayer warping creel, H-type, 630 creeling positions Disc brakes, electr. stop motion, pitch 30 cm – adjustable abbot. 60-70 fractional beams (for direct warper and sizing) B)01 Karl Mayer Rotal Sizing machine, type ELC-O-TENS year 2000, with Pleva humidity and tension control, warp beam creel, for max. 16 warp beams Nom. working width 180 cm max. beam flange Ø 1,016 mm pneum. Brakes 1 sizing double trough Nom. working width 180 cm Pre-Wetting double dip and squeeze roller pair Cylinder Dryer 10 drying cylinder Ø 800 mm Partitioning Field Abt. 4.5 mtrs. Waxing device Beaming machine / headstock max. nom. working width 240 cm, max. beam flange Ø 1100 mm speed up to 140 m/min Beam Pressure Device Size kitchen turbo cooker,

Pneumatic plate punch INGEKBA Rapida 142; good condition: perforation 780mm autoplate; investment contact; compressed air required. Pneumatic plate punch KBA Rapida 142; good condition; punch size 780mm autoplate; feeder control; Compressed air needed.

The scope of delivery includes: 01x Ceiling Mirror, II. Choice ( New) Outer diameter: 800 mm Total height: approx. 300 mm Material: Plastic Incl. fastening chain: approx. 5,000 mm Weight / piece: approx. 2.10 kg Note: This is a second choice product, new unused. II. Choice means there may be dust deposits, minimal scratches or soiling. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Replacement welding controllers 19" for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

-

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Replacement welding controllers 19" for resistance welding machines MPS 8043/1 MPS 8043 Q

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model F18GL Spec number G 48573 Serial number 399762 Stamford generator HC4346 380V/50Hz, 300 KVa 455 Amp Serial number 8062 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GL Spec number 80012 Serial number 401853 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed

Tier Oven Wachtel Piccolo I-6 DMS 3 Year of Make: 2016 A used electric deck oven Wachtel Piccolo I-6 with 6 shelves each 80x60cm is for sale. This oven is function-tested immediately available in stock. The oven is equipped with exhaust hood and proofer. Deck Oven Quail Piccolo I-6 DMS 3 Glass with 7-Day Clock - 6 shelves each 80x60cm - Each floor with separate controls - Top and bottom heat can be controlled separately - Each floor with a separate steam box for the generation of steam - With automatic night start function - With exhaust hood - Stove with water connection for steam - 29.3 kW - Voltage: 400V AC/3Ph/N/PE/50Hz - Year of construction: 7/2016 Shipping costs and trade-in on request.

SK40 DIN 69871 Oil Feeder met Holder Weldon 40mm A= 65mm For internal cooling for rails without internal cooling through the spindle

Key data: 8000 KW, 7425 kVA, 11000 V

CHARACTERISTICS OF GENSET ✓ Wärtsila 16V32SG | YOM 2015 | Real power of the motor is 8.000 kW (in plate) | Effective design power was reduced to 7.400 kW in order to get adapted to legal power stated at permits (there was a gas turbine in this plant before installing this Wärtsilä genset) | Fuel: Natural gas ✓ Generator ABB 7,425 kVA | 11,000 V | 50 Hz | Cos = 0.98 AVAILABLE EQUIPMENT ✓ Genset with auxiliaries included control panel and synchronizer ✓ Generators high voltage switchgear 11 kV, protections cabinet ✓ Lub oil system, gas valves, crane, radiators HT circuit, cooling towers LT circuit, heat exchangers, control valves, water and oil pipes, exhaust silencer. ✓ Main step-up transformer SIEMENS 8000 kVA | 11 / 15 kV | YOM 2015 ✓ Auxiliaries transformer EFACEC 400 kVA | 0.4 / 15 kV | YOM 2009 ✓ Heat recovery boiler for steam generation | Y ...

SK40 DIN 69871 Oil Feeder Weldon 32mm

bandwidth 90 mm, masses 0.8 x 0.8 x 2.2 m , Btto 320 kg/ pcs

Hermann Waldner stainless steel mobile vessel, jacketed for heating/cooling, total internal volume 60 litre, total jacket volume 20 litre, permitted internal vessel operating temperature max.150ºC, permitted jacket operating temperature max. 150ºC, permitted operating pressure inside max. 0 bar, permitted operating pressure in jacket max. 3 bar, bottom outlet, mobile on wheels, vessel height approx. 1000 mm, vessel outer diameter approx. 650 mm, vessel inner diameter approx. 500 mm

Screw spindle pump Manufacturer: Wangen GmbH Type: Train 104.53-1 N°: P951403 Built: 2018 new condition various spare parts with original operating instructions (incl. CD-Rom) and documentation Engine power: 5.5 kW Weight of engine: 119 kg LWH: 1300 x 450 x 320 mm