w p used for sale

Dimensions (L/W/H): 920x2100x2150 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 920x2260x2150 mm Weight: 300 kg Total power requirement: 7,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1000x3000x2200 mm Weight: 450 kg Total power requirement: 11 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 8300x1600x2600 mm Weight: 6000 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Dimensions (L/W/H): 1600x840x720 mm Weight: 210 kg Total power requirement: 5,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2765x2520x1730 mm Weight: 3600 kg Total power requirement: 55 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used shredder In good condition this shredder was used inside the dutch greenhouses for taking out the final plants of tomato's, peppers etc Available directly.

Dimensions (L/W/H): 4200x1650x2150 mm Weight: 7500 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2500x730x1280 mm Weight: 550 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2200x1340x1050 mm Weight: 640 kg Total power requirement: 1,3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5800x2250x2100 mm Weight: 2900 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4200x1650x2250 mm Weight: 7900 kg Total power requirement: 54 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1920x4685x6300 mm Weight: 2500 kg Total power requirement: bis max. 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3050x760x2100 mm Weight: 400 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

groove width: 3 - 90 mm drawing length: 430 mm working speed: 4 - 12 m/min slot-milling length: 400 mm return speed: 15 m/min total power requirement: 5,5 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 1,3 x 1,7 x 1,5 m • div. pull broaches and guidances The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2800 KW

ANNOUNCEMENT – WAUKESHA 16V AT27GL ENGINES & KATO GENERATORS FOR SALE Available for sale: three Waukesha 16V AT27GL natural gas engines, plus three KATO 3606LVA generators and Aalborg AV-4 heat-recovery boilers. These units offer proven durability and efficiency, ideal for power generation and industrial applications. Waukesha 16V AT27GL Engines – Key Information Engine 1 – Serial C-94476/1 Hour Meter: 79,928 h Maintenance: 36K Plus at 52,000 h (2021) and 8K (2025) Pending: 72K Status: Operational Turbochargers: 12K service (2025) Engine 2 – Serial C-94534/1 Hour Meter: 84,152 h Maintenance: 8K (2025) Pending: 72K + main gas valve replacement Turbochargers: require 50K overhaul Status: Operational Engine 3 – Serial C-94476/2 Hour Meter: 67,122 h Maintenance: 72K at 66,000 h (2024) Pending: liner replacement + main gas v ...

Wabäma Bread Slicer Sichelmesser Machine Cutting width: 4 – 20 mm adjustable digital control Stainless steel cladding 400V 50Hz Height: 110cm Width: 100cm Depth: 70cm

Wabäma Bread Slicer Cutting width: 8mm digital control 230V 50Hz Height: 117cm Width: 60cm Depth: 80cm

Wittmann Battenfeld Injection Moulding Machine Here we offer you a SmartPower 210/1330 Thermoset machine. Wittmann Battenfeld injection moulding machine with UNILOG B8 control system Plant was serviced by the manufacturer WITTMANN BATTENFELD Deutschland GmbH in January 2021 / checked and brought up to date As part of the complete review, various updates were installed and the hydraulic oil (600 liters) was refilled. In addition to the already normally existing pressure switches, the system consists of the possibility to install additional internal mold pressure switches 2 pieces Kistler module for mold internal pressure switching range 1: 20,000 pC, range 2: 10,000 pC). The parts for the upgrade mold internal pressure switches are part of the scope of delivery. Injection molding machine: Series: SmartPower Machine type: 210/1330 Control type: UNILOG B8 Machine number: ...

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial CNC spindles as well as VARIO table and milling carriage Machine dismantled professionally and in our warehouse in 73447 Oberkochen. Video and pictures were taken before dismantling. Technical data summary (please inquire about any additional accessories included) crosscut saw > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser directional light to detect the saw section > Axial adjustment path 150 mm NC axis, electronically infinitely variable > Radial pneumatic adjustment path 8 positions for e.g. edge rounding from above Rounding aggregate > Position: horizontally below > Motor power ...

Dimensions (L/W/H): 1400x750x2100 mm Weight: 220 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2000x750x2100 mm Weight: 250 kg Total power requirement: 3 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year of construction approx. 2014 Greenline Version - Energy Saving (IE2) Conveying equipment temperature up to +120°C Multifunctional use, e.g. for kitchen exhaust air, industrial exhaust air Double-walled housing, soundproofed (50 mm rock wool – non-combustible, DIN 4102) Inspection door simplifies maintenance work Voltage/frequency: 400 V / 3 ph / 50 Hz Power: 3670 watts Current: 6.16 Amps Speed: 2890 1/min Protection class: IP 55 Motor protection: PTC (PTC) Max. conveying device temperature: +120°C Motor Type Efficiency/Adjustable: IE2 / FU Adjustable (Greenline) Max. volume flow: 7513 m3/h Motor outside air flow complies with DIN 18869-T1: yes Sound pressure level 4m: 53 dB(A) Insulation/Insulation Housing: Double-walled with 50 mm mineral wool (non-combustible) Housing material: galvanized sheet steel Outer Dimensions: 770 x 770 x 655 mm (L x D x H) Connecti ...

available CHILLER Yom: 2012 85kW cooling power incl. Power Panel, Panel for Water preparation

We offer here a climate test chamber from Weiss with Feucht! The climate test chamber was only serviced by Weiss/Vötsch in Dec, 2020 and has the test sticker until Dec. 2021! All tests were carried out, another test run was carried out in our company, the humidity and temperature were checked with calibrated test equipment. The climate test chamber has been subjected to an annual inspection and is in a perfect condition! The logbook is attached WHITE 1500SB/010JU/40DU Temperature range -40°C - +180°C Humidity 15%- 95% Air conditioning: +10°C - +95°C Pihyv Test room: 1500 liters Internal dimensions: 1490 mm deep, 1100mm wide, 945mm high External dimensions: 2470mm wide, 2000mm high, 1450 wide Weight approx. 1100kg Refrigerant: R404a 2,00kg Cabinet has no feet and stands stably on a frame If you have any further questions, please do not hesitate to contact us

used lift-tilt device Manufacturer: WAGNER UMWELTTECHNIK Type: W HKV Year of construction: 2008 Load capacity:500 kg Drive power: ___ kW

used non-ferrous separator Manufacturer: WAGNER Type: 0428-25/60 Machine No.: 214401 Year of construction: 1994 specifications: Conveying width: approx. 600 mm Throughput: 40-65 m³/h Belt speed: 0.12 m/sec to 1.3 m/sec Weight: approx. 1,200 kg Protection class: IP 54 (control device) Motor rotor drive: 3.7/4.7 kW Motor belt drive: 0.75 kW

RECON Part Number: 305781B Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

In-store oven Wiesheu B10 Dibas 2 Hot air oven Wiesheu Dibas for 10 trays 60x40cm with fermentation cabinet and exhaust air hood including steam condenser immediately available in the warehouse for sale. -Oven is for 10 trays 60x40cm -with automatic door -with IS600 control -Year of construction 2006 -Rated current 26.6 A -Power: 18.4 kW -Proofing cabinet for 20 sheets 60x40cm -Model : GS2 ED60/40 0700_A-BJDBA -Year of construction 2009 -Connection: 2.1 kW Dimensions: Width: 93cm Depth: 105cm Height 218cm

RECON Part Number: 300007B V- Machine ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

FOR SALE NEW- UNUSED WARTSILA COMPLETE EXHAUST GAS TURBO CHARGER . TO WHOM IT MAY CONCERN ; WE VE NEW UNUSED WARTSILA ST 6 COMPLETE EXH GAS TURBO CHARGER WITH ORIGINAL PACKAGE AT WOODEN BOX AT OUR STOCK . FOR YR GUIDENCE IT IS KBB HPR 6000 PLS REFER ATTACHED PICTURES. PLS FIND SPECT AT BELOW. TYPE ST 6 SPEC 7601068 n max 32900 mın t max 650 C Serial 00566 / 17 YOB. 2017 WEIGHT 466KG MADE IN THE EU EX OWNER SUPLIED FROM WARTSILA. TURBOCHARGER READY TO TRANSPORT. IF YOU ARE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Current stock: approx. 350 pcs. Included in delivery are: 01x Bockrolle, used Material color roll: black Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 37.5 mm Roll material: Solid rubber Rim material: Polypropylene Plate abbreviation: approx. 100 x 90 mm (WxD) Hole Ø: approx. 9 mm Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.803 kg

WARTSILA 8L32 CRANKSHAFT STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS

2 PCS WARTSILA 6R32 CRANKSHAFTS , STD SIZE. TOGETHER WITH GEARS AND COUNTERWEIGHTS

Тип: Z4A Число осей/ шпинделей Доступны различные варианты головок 4x3 Расстояние между крайними шпинделями 2300 mm Регулируемая скорость сверления Высота стола от пола 840 mm Размеры стола 600x2350 mm Число прижимов 8 Мощность двигателя 6 kW(4x1,5) 400 V Скорость двигателя 2840 r.p.m Необходимое давление воздуха 6-8 bar Вес 425 kg Размеры для транспортировки 2450x960x1550 mm

WARTSILA 6L20 CRANKSHAFTS , STD SIZE , 2 PCS TOGETHER WITH GEARS AND COUNTERWEIGHTS

Hello all We have in our stock in istanbul Turkey 2 x WARTSILA 8R32 CRANKSHAFTS, STD SIZE TOGETHER WITH GEARS AND COUNTERWEIGHTS Please contact us at : info@fin-marine for more info

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Woodward / Wärtsilä LinkNet 6 CHANNEL 4-20 mH INPUT in original packaging ! See photos !

AUTOCLAVE (USED FOR ALL TYPE OF YARNS) , FULLY AUTOMATIC VACUUM - STEAMER WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ MAKE : WELKER ( GERMANY) Y.O.C. : 1987, Reconditioned 2002, later used for couple of more years, then preserved ! VOLUME : 9200 L MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM

swing diameter: 475 mm centre height: 510 mm width: 110 mm loading area: 360x310 mm diameter of quill: 80 mm bearing diameter: 75 mm Wheel width: 36,5 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Machining max mm: 330 Ø mm: 40 Computer-aided measuring and displaying system for Measurement of tools, digital display of tool data Input of profile dimensions, calculation of spindle setting data Transfer to the machine by means of a label

Cutter K+G Wetter CutMix 200 STL with load for 200 liter standard car and ejector, 200 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection cover, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely adjustable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, K+G weather CM 200 STL

Cutter K+G Wetter CutMix 120 STL with load for 120 liter standard car and ejector, 120 liter cutter, surface, bowl lid with storage wall and bowl stainless steel, noise protection lid, knife shaft brake, main switch, membrane keyboard, infinitely adjustable knife shaft speed (40-4,400 rpm), infinitely variable bowl speeds (5-18 rpm), infinitely adjustable mixing gear backwards (40-500 rpm), digital display knife shaft temperature bowl, rated power 42.5 kW, K+G weather CM 120 STL

sheet width: 3000 mm plate thickness: 50 mm pre-bending: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC lathe WIA L 200 SY Manufacturer: Hyundai YEAR: 2014 Control Fanuc ... Fanuc 31i Turning diameter ... 550mm Rotation length... 530mm Axis Y ... +-40mm Counter spindle Spindle bore... 70mm Tool turret... 12 L x W x H ... 3045 x 1707 x 2021mm Machine weight ... 4600kg The machine is in good condition, possible to test under power.