w p used for sale

Manufacturer: Weinig, Type: Uniplan 23, Year: 1998, Control: hand, Planing widht mm: 220, Planing hight mm: 120, Number of spindles: 2, Spindle arrangement: Oben/unten, Min.-max. workpiece length in mm: 300, Shaft speed: 7200, Hydro-clamping: yes, Spindles: 2, Spindle diameter in mm: 50, Rotations of spindles max. rpm: 7200, Spindle arrangement: Oben/unten, Separate engine per spindle: yes, Main engine kW: 5,5, Fully suspended drive feeding: yes, Feeding - kW: 3, Feeding speed min-max m/min: 6-36, Feeding speed continous adjustable: yes, Pneumatical top pressure: yes, 1.Bottom spindle kW: 5,5, 4.Top spindle kW: 5,5, Year :1998

Steel Holder Head Waldrich Stand Metal Long Planer Slotting Machine Schepping Total weight approx. 100 to 150 kg. Good used condition, worked until the end, only the spur gear at the rear shows signs of wear. The offer is for the head, which is height-adjustable with the handwheel. It was dismantled from the actual machine. The support plate on the boom, which is connected to the large trapezoidal spindle is NOT included. The side head is also still in stock, but NOT included in this offer. With a heavy heart, I dismantled the parts from a superbly preserved planing machine. The machine was in the basement of a machine factory and it was not economically possible to replace this . It was apparently put there earlier and then a wall was bricked up. You will receive an invoice in paper form. Differential taxation according to paragraph 25a of the German VAT Act.  ...

WEINIG Hydromat H23 – with 10 spindles, S/N 89321, built in 1999 WEINIG Cross Transport HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Roller Accelerator Model 814 Short infeed table with heavy 4-roller feed Automatic planing machine with reinforced KASCHWIG soundproofing booth 3-sided • Working width max. 230 mm • Working height max. 160 mm • Electronic feed frequency-controlled 8 – 80 m/min. • Feed motor 18.5 KW • 1st spindle bottom 11.0 KW • 2nd spindle right 11.0 KW • 3rd spindle left 11.0 KW • 4th spindle right 11.0 KW • 5th spindle left 11.0 KW • 6th spindle top 15.0 KW • 7th spindle bottom 11.0 KW • 8th spindle top 15.0 KW • 9th spindle bottom 15.0 KW • 10th spindle universal 11.0 KW (4-sided) • Spindle speed 6,000 rpm. • Spindle diameter ø 50 mm • All spindle motors with NEW ...

WEINIG Quattromat Q23P, S/N 86825, YOC 1999 Machine with full fairing and integrated sound and dust protection. Technical data: Planing width: min. approx. 13 mm / max. 230 mm (with 125 mm flight circle) Planing height: min. approx. 6 mm / max. 120 mm (with 125 mm flight circle) Feed: 8 m/min., feed motor 1.5 KW Spindle sequence: 1. Spindle at the bottom, motor 5.5 KW 2nd spindle right (joint) / 3rd spindle left, motor 7.5 KW 4. Spindle top, motor 5.5 KW Spindle diameter D = 40 mm Accessories/Extras: Dressing table 2000 mm with joining ruler (adjustment range 10 mm) Folding device with joining seam cutter Manual Wax Pump Pneumatic pressure of the feed rollers Feed roller in front of dressing pneumatically timed Central position of the lubrication points at the front of the machine SICO Counters Set of planer heads WEINIG Centrolock 533 Operating instructions,  ...

Preformed Bottle Filling, Capping, Labelling and Packing Line for 2-litre plastic containers (jugs/bottles) for fresh milk with screw cap closure. The line is equipped with integrated control systems and is suitable for hygienic operation., Scope of Supply:, 1. Filling and Capping Machine, - Integrated gravity filling and screw capping system., - Designed for CIP (Clean-in-Place) cleaning., - Fully enclosed construction with access doors., - Equipped with sterile air filtration system., - 32 filling valves and 10 capping heads., - Touchscreen operator control panel., - Cap feeding bunker with conveyor to capping unit., Manufacturer: Weightpack, Model: WFT 32.10.160, Serial Number: WL239, Year: 2008, Capacity: up to 7.000 containers per hour, 2. Leakage Testing Unit (Squeeze Tester), Designed to detect container leakage after filling., Manufacturer: Teledyne TapTone, Serial Number: E05-00 ...

Key data: 762 mm, 508 mm, 610 mm

Hurco VMX 30 Year 04/2007 Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Spindle holder SK 40 Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Control HURCO WinMax ver. V8 01.09.25... Options see pictures Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m Interior was painted, scrapers of the telescopic covers were renewed. Machine can be viewed under power by appointment. Price is net plus VAT. Freely loaded onto trucks

The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...

Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...

Pneumatic diaphragm pump with pressure multiplier. New equipment

End mill, end mill, cutter, shell cutter, milling head, angle cutter, shell angle cutter, angle end mill -Manufacturer: Greiner, Angle end mill, cylindrical end mill, 2 pieces -Type: W242 Ø60x16xØ22 / Ø48x16xØ22 -Hole: Ø 22 mm -Price/Fee: complete -Transport dimensions: 110/60/H30 mm -Weight: 0.5 kg

Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.

Manufacturer: Warcom Model: Logica 100-2500 Year of Manufacture: 2023 Type of Machine : CNC Press Brake CE certified Overall working hours: 3,299 Pump working hours: 1,549 Rammer working hours: 140 Rammer strokes: 112,717 Find more here - / Contact us at -

Excellent condition - Fully operational - Loading / Transport possible! Working width 13 to 230 mm Working height 6 to 120 mm Number of spindles 4 Motor power of dressing spindle 4 to 7.5 kW Motor power of vertical spindles 5.5 to 11 kW Motor power of upper spindle 4 to 11 kW Feeder motor power 1.5 kW Diameter of spindles 40 mm Tool flight circles of throat spindles 125 to 200 mm Adjustment range of spindles axial 30 mm Adjustment range of dressing spindle 5 mm Feed rate 8 m per minute Diameter of feed rollers 140 mm Width of feed rollers 2 x 50 mm Width of roller in outfeed table 50 mm Adjustment range for dressing table and ironing ruler 10 mm Height of right stops 60 mm Length of dressing table 2000 mm

Cilindro asse X (estrazione) nuovo n.1 circuito vuoto n.1 circuito pinza

Bridge type Machining Centre ISPER HASP 643 WAVE - 30.000 rpm - travel 650x420x350 mm - CNC SELCA 4045D, Information about technical data are not binding., Machine available subject to prior sale., Working table size: 700x400 mm, Longitudinal travel x axis: 650 mm, Cross travel y axis: 420 mm, Vertical travel z axis: 350 mm, Measurement system: HEIDENHAIN optical scales, Working feed x-y-z axes: 0 - 20.000 mm/1, Rapid feed x-y-z axes: 20.000 mm/1, Spindle taper type: HSK 40-E, Automatic tools change nr.: 20, Spindle speed: 0- 30.000 rpm, Spindle motor power: 8 Kw, Cnc: SELCA 4045D, Approx net weight: 4.500 Kg, Accessories: Chip conveyor, RENISHAW Probe

Weinig Unimat 2000 four-sided planer Working width 230mm Working height 160mm Number of spindles 8 Spindle system Down 11kw 12.000r.p.m Right 7.5kw 6000r.p.m Left 11kw 12.000r.p.m Right 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 7.5kw 12.000r.p.m Mountain 11kw 12.000r.p.m Down 30kw 6000r.p.m Inverter-adjustable feed speed up to 36m/min 4 drive rollers in the work table Pneumatic Material Clamps Total power of the machine 106kw Year of manufacture 2002

Continuous Butter Line which exist out of a Continuous Butter Making Machine (CBM) + Butter silo + Bulk Packer. The line has a production output capacity up to 6.000 kg of butter per hour. It operates with an input of approximately 12.000 liters of cream per hour. All product-contact parts and the frame constructed from stainless steel. It is CIP-cleanable for hygienic operation., - Continuos Butter Machine (CBM):, Manufacturer: GEA Westfalia, Model: BUD 6000, Year: 1996, Condition: Used, Serial Number: 1715 18L, Capacity, butter output: up to 6.000 kg/h (depends on product), Capacity, cream infeed: ± 12.000 kg/h, Including:, - Vacuum pump., - Brine dosing system., - Cream tank., - Cream pump., - Cream pre-heater., - Interconnecting piping, valves, flow indicators etc., - Control panel with Siemens S7 PLC and operating panels., Additional a Wal, moisture control system is integrated in  ...

Matek Mix-Kult System for mixing ready-made syrup with water or mixing several components. The system is mounted on a base frame. The individual units are easily accessible and can be observed as they work. All necessary fittings, control and display devices as well as the control cabinet are installed. The mixing plant is fully automatic. Syrup and water are dosed in a predetermined ratio, mixed evenly, deaerated and impregnated. The finished beverage is stored in the beverage tank, from which it is then optionally piped to the filler via a pressure booster pump., Additional title: Inline mixing unit, Capacity: 80 hl/h, Operating pressure: 10 bar, Volume: 555 l, Power: 10 kW, Water: 2,5 atm, Compressed air: 5 atm, Length: 1900 mm, Width: 900 mm, Height: 2300 mm, Weight: 1000 kg, Material: Stainless steel, Base construction: Frame, Features: Mixing and dosing vessel; beverage tank; Mohno ...

Stationary sheet filter with quadratic filter elements in a row., Additional title: sterilisation filter, Capacity: 140 hl/h, Number of plates: 119 plates, Length: 7500 mm, Width: 1600 mm, Height: 2000 mm, Formats: Quadratic filter elements - 100 cm x 100 cm, Layer patterns: Vertical row arrangement of the filter elements

plate filter, 60 x 60 cm with 142 plates, manual pressing., Number of plates: 142, Length: 3,6 m, Width: 0,8 m, Height: 1 m, Weight: 2000 kg

Kieselgur mixing station comprising two vertical stainless steel mixing tanks, each fitted with a top-entry agitator and a central outlet., Additional title: Kieselgur mixing station comprising two vertical stainless steel mixing tanks, Capacity: 1300 l/vessel, Features: 2 stainles steel vessels with agitator, and podest, incl. fittings

This pressure vessel from Werk Steinecke is a robust and reliable solution for use as a buffer tank in breweries and beverage processing plants. With a capacity of 178 hl and an operating pressure of 4 bar, it is ideal for intermediate storage and process buffering. The tank is designed for horizontal installation and features a solid industrial construction. It is equipped with a DN80 connection and can be fitted with the desired additional fittings from the available stock after consultation. A reliable and cost-effective solution for expanding or upgrading your production system. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: puffer tank, Capacity: 17800 l, Working pressure: 4 bar, Length: 4,8 m, Width: 2,4 m, Height: 3 m, Weight: 2000 kg, Material: stainless steel, Position: horizontal, Features: DN80 , Periphery: After consultation, we can equ ...

A hydraulic double-column drawing press, which has only been used as a die tryout press, is available. Press force: 2500kN, stroke: 400mm, max. installation height: 600mm, table dimensions X/Y: 1250mm/800mm, column clearance: 1350mm, side passage: 640mm, table height: 800mm. Machine dimensions X/Y/Z: approx. 5700mm/3600mm/2800mm, weight: approx. 36000kg. The machine received a new screen, a hydraulic pump, a Sitema fall protection system, a press cylinder seal kit and an oil change in the last 12 years. Documentation available. An on-site inspection is possible.

pressure:800 t distance between columns:2900 mm stroke:350 mm Controls:SIEMENS PRESS DESIGN:. - frame design : H-frame :. - Drive type : mechnical :. - openings in uprights : yes :. - number of cushions:0 - opening in table : yes :. - moving bolster : yes :. PRESS FORCES:. - total force (nominal):800 to PRESS TABLE:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - rectangular breakthrough (width):2000 mm - rectangular breakthrough (front-back):1800 mm - height above floor level:850 mm RAM:. - clamping surface (left-right):2800 mm - clamping surface (front-back):2800 mm - stroke:350 mm - number of strokes max:55 /min RAM (MECHAN. PRESS):. - ram adjustment:350 mm TOOL ASSEMBLY DIMENSIONS:. - shut height (stroke down, adjustment up):1100 mm - distance between columns (H-frame):2900 mm - Free passage between side columns (width):2560 mm ...

working area:10700 mm Tube length:300-11000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm Power:120 KW dimensions:21,5 x 5 x 3,8 m mm weight:90.000 kg pre-turn capacity:200 cdm/min HS Code: 8461 90 00 Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:56 / 84 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:710 x 500 mm hole in the table:320 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,1 t dimensions (W x D x H):1,35 x 2,0 x 2,6 m overload protection in ram:mechanical

Pressure:080 t throat:380 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:472 mm table surface area:840 x 610 mm table height over floor:800 mm passage to the back:520 mm ram surface:650 x 400 mm ram adjustment:70 mm power capacity:7,5 kW weight:6,9 t Dimensions (WxDxH):1,1 x 2,15 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical ram counterbalance:pneumatic clutch-/ brake combination:pneumatic

Pressure:063 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:700 x 500 mm hole in the table:250 mm table height over floor:800 mm passage to the back:320 mm ram surface:450 x 280 mm ram adjustment:63 mm weight:4,5 t Dimensions (WxDxH):1,6 x 2,0 x 2,8 m overload protection in ram:mechanical

pressure:160 t distance between columns:1340 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:930 mm side window:600 mm ram surface:1300 x 900 mm speed down:367 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:15,0 t Dimensions (WxDxH):2,5 x 2,2 x 4,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 foundation pit:not necessary

pressure:500 t distance between columns:2400 mm stroke:400 fix mm no. of strokes:13 - 23 /min Distance table/ram, max. stroke up, adjustment up:1600 mm table surface area:2300 x 1800 mm column travel -side:1600 mm ram surface:2170 x 1800 mm ram adjustment:300 mm total power requirement:110,0 kW Weight:135,0 t Dimensions (WxDxH):3,35 x 4,85 x 7,0 m clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric

pressure:080 t throat:360 mm stroke:8 - 112 mm no. of strokes:78 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:900 x 650 mm hole in the table:250 mm table height over floor:800 mm passage to the back:330 mm ram surface:650 x 400 mm ram adjustment:80 mm power requirement:11,0 kW dimensions (WxDxH):1,2 x 2,2 x 2,9 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanisch

pressure:160 t throat:360 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:500 mm table surface area:920 x 700 mm Hole in the table:150 mm table height over floor:960 mm passage to the back:590 mm ram surface:620 x 560 mm speed down:390 mm/s speed up:390 mm/s working speed:58 mm/s power requirement:30,0 kW weight:16,0 t dimensions (WxDxH):1,6 x 2,5 x 3,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanisch

pressure:080 t throat:300 mm stroke:8 - 112 mm no. of strokes:60 /min distance table/ram, max. stroke up, adjustment up:467 mm table surface area:710 x 560 mm hole in the table:240 x 115 mm table height over floor:800 mm ram surface:400 x 315 mm ram adjustment:80 mm power requirement:7,5 kW weight:5,1 t dimensions (WxDxH):1,4 x 1,9 x 2,7 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

pressure:060 t throat:220 mm stroke:6 - 94 mm no. of strokes:115 /min distance table/ram, max. stroke up, adjustment up:340 mm table surface area:680 x 400 mm hole in the table:120 x 70 mm table height over floor:750 mm passage to the back:290 mm ram surface:240 x 240 mm ram adjustment:57 mm power requirement:3,7 kW weight:2,8 t dimensions (WxDxH):1,5 x 1,5 x 2,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic

Pressure:630 t distance between columns:1600 mm stroke:fix 250 mm no. of strokes:20 /min distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1550 x 1200 mm table height over floor:800 mm side window:620 mm ram surface:1360 x 1200 mm ram adjustment:160 mm height over floor:5,9 m height beneath floor:0,6 m power requirement:32,0 kW weight:59,0 t dimensions (WxDxH):3,0 x 2,2 x 6,5 m clutch:pneumatisch overload protection in ram:hydraulisch ram adjustment:motorisch ram counterbalance:pneumatisch

pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive tool changing unit:2 x

pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive tool changing unit:2 x

pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive tool changing unit:2 x

pressure:500 t distance between columns:3400 mm stroke:850 mm no. of strokes:9 - 18 /min distance table/ram, max. stroke up, adjustment up:2050 mm table surface area:3100 x 1900 mm table height over floor:400 mm side window:1550 mm ram surface:3100 x 1900 mm ram adjustment:350 mm pressure of drawing cushion in ram:70 t pressure of drawing cushion in table:140 t stroke of drawing cushion in table:0 - 250 mm stroke of drawing cushion in ram:150 mm height beneath floor:6,0 m height over floor:8,3 m weight:155,0 t dimensions (WxDxH):5,1 x 4,5 x 12,3 m Kind of drive:link drive overload protection in ram:hydraulic ram adjustment:motoric tool changing unit:2 x

pressure:063 t throat:280 mm stroke:8 - 100 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:620 x 500 mm hole in the table:230 mm table height over floor:800 mm ram surface:310 x 255 mm ram adjustment:63 mm power requirement:5,5 kW weight:3,95 t dimensions (WxDxH):1,2 x 1,8 x 2,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 overload protection in ram:mechanical

pressure:075 t throat:230 mm stroke:6 - 100 mm no. of strokes:105 /min distance table/ram, max. stroke up, adjustment up:354 mm table surface area:700 x 420 mm hole in the table:250 mm table height over floor:800 mm passage to the back:310 mm ram surface:264 x 270 mm ram adjustment:60 mm power requirement:5,5 kW weight:3,6 t dimensions (WxDxH):1,2 x 1,6 x 2,3 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:330 mm table height over floor:820 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,3 t dimensions (WxDxH):1,6 x 2,2 x 2,9 m

pressure:150 t throat:350 mm stroke:6 - 122 mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:440 mm table surface area:820 x 600 mm hole in the table:350 mm table height over floor:800 mm ram surface:500 x 350 mm ram adjustment:75 mm power requirement:10,0 kW weight:7,1 t dimensions (WxDxH):1,5 x 2,1 x 2,9 m

pressure:100 t throat:375 mm stroke:20 - 125 mm no. of strokes:30 - 80 /min distance table/ram, max. stroke up, adjustment up:515 mm table surface area:900 x 635 mm hole in the table:280 mm table height over floor:800 mm passage to the back:570 mm ram surface:700 x 450 mm ram adjustment:80 mm power requirement:15,0 kW weight:8,0 t dimensions (WxDxH):1,5 x 2,4 x 3,5 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:hydraulic ram adjustment:motoric ram counterbalance:pneumatic

pressure:160 t throat:480 mm stroke fix:fix 180 mm no. of strokes:25 - 70 /min distance table/ram, max. stroke up, adjustment up:650 mm table surface area:1100 x 900 mm Hole in the table:450 mm table height over floor:900 mm passage to the back:700 mm ram surface:900 x 600 mm ram adjustment:144 mm power requirement:30,75 kW weight:15,3 t dimensions (WxDxH):2,0 x 2,4 x 3,75 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic, Desch overload protection in ram:hydraulic ram counterbalance:pneumatic

pressure:315 t throat:480 mm stroke:20 - 190 mm no. of strokes:36 + 45 /min distance table/ram, max. stroke up, adjustment up:615 mm table surface area:1400 x 880 mm hole in the table:250 mm table height over floor:800 mm passage to the back:950 mm ram surface:850 x 630 mm ram adjustment:125 mm power requirement:33,0 kW weight:30,0 t dimensions (WxDxH):2,0 x 3,0 x 4,4 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch-/ brake combination:pneumatic overload protection in ram:hydraulic stroke adjustment:semi-automatic ram adjustment:motoric ram counterbalance:pneumatic