w p used for sale

WIWA High Pressure Pump 235.42R / 38042, YOC 2000 With high flow rate, ideal as a feed pump for airless sprayers (united for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Gear ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Flow rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch -Manufacturer: Weidmüller, surge protection switch -Type: PU 1+1 C Class II -Number: 6 pieces available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

WARCOM plasma - Cutting measures 2500x6000 - Equipped with protections - Suction system

WEBER COOLING BASE TWO Vacuum cooling system Cooling capacity: 2 IP or 2 EUR Products to be cooled: leafy vegetables/fruits up to 1000 kg Cooling temperature: from 20-30 degrees C to 3-5 degrees C Control: PLC Unitronics V1040, Weber 2022 software Vacuum pump: 1 x Busch RA R5 0305D ( 300 m3 / h ) Chiller: Aermec ANL 202 Compressor: Metabo Basic 250-24W OF

Cable reel, Cable reel, Power cable reel, Cable reel, Workshop reel, Cable drum, Wall cable drum, Workshop cable drum, Wall reel -Cable reel -Drum: Ø 300/160 mm -Weight: 11 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder -different recordings: 10 -from: WNT-Mastertool -Sale: only complete -Price: complete -Weight: 36 kg

Control cabinet and distribution board, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 243 -Quantity: 2 pieces available -Price: per piece -Minimum purchase: complete -Dimensions: 200/80/H110 mm -Weight: 0.5 kg/piece

Control cabinet and distributor construction, busbars, busbar supports, busbar adapters, terminal plates -Wöhner item no.: 01 240 -Number: 9 pieces available -Price: per piece -Dimensions: 200/55/H110 mm -Weight: 0.4 kg/piece

Power converter, power supply, power supply unit, switching power supply unit, power supply unit module -Input: 100-240 V AC 50/60 Hz 6.5 A -Output: 24 V DC/20 A -Price: per piece -Number: 11 pieces -Dimensions: 295/125/H50 mm -Weight: 1.7 kg/piece

Type / type: N 25 Year of make: 1977 Manufacturer / make: Weingarten Rated pressure: 25 t Number of strokes: 140 / min Radius slide center to frame: 200 mm Window in frame: 240 mm distance table slide: 250 mm Stroke adjustment / adjustment of stroke: 8 ... 80 mm Ram adjustability/adjustment of ram: 50 mm Ram size / surface of ram: 355 x 220 mm Table size / surface of bed: 560x 400 mm Hole in table: 160 mm Power of main motor:3 kW Weight / weight: 2,23 t

Specifications: Capacity: 60 t Passage between stand: 820 mm Working area, max.: 820 x 300 mm Piston stroke: 400 mm Flow speed: 6.1 mm/s Return speed: 10 mm/s Motor power: 3 kW Width: 1460 mm Depth: 850 mm Height: 2400 mm Weight, approx.: 700 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design made of welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 100 t Passage between stand: 1010 mm Working area, max.: 1010 x 300 mm Piston stroke: 400 mm Flow speed: 7.12 mm/s Return speed: 13.42 mm/s Motor power: 4 kW Width: 1600 mm Depth: 850 mm Height: 2450 mm Weight, approx.: 1000 kg Equipment: - Laterally movable cylinder - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

Specifications: Capacity: 160 t Passage between stand: 1100 mm Working area, max.: 1100 x 350 mm Piston stroke: 400 mm Flow speed: 6.2 mm/s Return speed: 6.8 mm/s Motor power: 5.5 kW Width: 1640 mm Depth: 1000 mm Height: 2550 mm Weight, approx.: 1300 kg Equipment: - Laterally movable cylinder via rack, pinion and handwheel - Spacious work area - Height-adjustable table - Torsion-resistant design with welded steel -Manometer - Fine adjustment of pressure - Additional hand pump

WAHLI Multi 76 multi purpose lathe Mach. No. 227 Wahli Frères S.A. in Bévilard, Switzerland For turning and milling. Spindle head vertical adjustment. Center height 125 mm ( 70-230 mm) Distance between centers 550 mm Spindle speeds 50-3000 rpm. Travels Z/X - 350/100 mm Spindle diameter 16 mm Max. working diameter 100 mm Power: 2-speed 0.5/0.9 kW motor

Groove width: 3-100 mm Drawing length: 850 mm Stroke: 870 mm Table size: 780 x 430 mm Bore range: Diameter: 10-600 mm Return speed: 40 m/min Cutting speed: 0-16 m/min Total power requirement: 8 kW Machine weight approx. 1.55 t Space requirement approx. 1.8 x 2 x 2.25 m Foundation depth: can be omitted (1.07) m because the machine looks on a steel platform A number of accessories available

Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

Tool holder, milling holder, milling tool -Number: 7x SK40 mounts with tool carrier -Executions: different -Bore chucks, flat chucks, reducing sleeves, cutter heads, shell end mills -Sale: only complete -Dimensions: 590/120/H210 mm -Weight: 12 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 300 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Dimensions: 425/45/H45 mm -Weight: 1.7 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 50 mm -Piston diameter: 25 mm -Piston rod: 10 mm -Dimension: Ø 27 x 192 mm -Weight: 0.25 kg

Round cylinders, pneumatic cylinders, standard cylinders, air cylinders, pneumatic punches, air punches, compact cylinders, short-stroke cylinders -Stroke: 150 mm -Piston diameter: 32 mm -Piston rod: 12 mm -Price: per piece -Number: 6 pieces -Dimension: Ø 36 x 300 mm -Weight: 0.95 kg/piece

WEINIG four-sided planing machine, PM 17, 5 spindles Machine No. 1329-2356 Year of manufacture: 1982 Working width 170 mm Planning height 120 mm 5 spindles: max. tool length 180 mm, 130 mm Feed table length 2000 mm with planing heads 6 spindles arrangement: 1. Bottom 4 kW 2. Right 3 kW 3. left 5.5 kW 4. Top 5.5kW 5. Bottom 4kW / universal Spindle diameter approx. 35 mm Feed speed 6.5 - 49 m/min. manual lubricant pump Incl. 5 tools for all heads Dimension 4500 mm x 1300 mm x H 1500 mm Weight approx. 3800 kg Technical data subject to correction

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck -Mouth size: Ø 250 mm -Recess: Ø 230 mm -Bolt circle: Ø 200 mm -Quantity: 2 available -Price: per piece -Weight: 35 kg

Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg

Copper pipe -Sanco copper pipe: EN 1057 -18x: 1 -Roll: 25 m -Number: 2 rolls available -Price: per roll -Dimensions: Ø 760/60 mm -Weight: 10.7 kg

Allweiler feed pump type SNF 280 ER46U4-W33 in new condition for sale. Technical data can be found in the attached data sheet.

Standard

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -DKRD Ø: 160 mm -Weight: 15.5 kg

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 175 mm -Plate thickness: 26 mm -with: support ribs -Weight: 90 kg

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Wedge rod feed, swivel feed, swivel swivel feed, power clamp feed -Feed size: Ø 250 mm -Weight: 35.5 kg

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 160 mm -TGL: 30-2312 -Weight: 11.2 kg

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 1,850 mm max. load per pair of trusses 2,650 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB100x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 1,600 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB120x50 Agraffe: 4 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB160x50 Agraffe: 5 HK (hook) Clear width: 3,300 mm max. load per pair of trusses 3,050 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB140x50 Agraffe: 5 HK (hook) Clear width: 2,700 mm max. load per pair of trusses 3,300 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: 2C155 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 3,700 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

Technical data for the pallet rack beam: Shelving system: Kimer The scope of delivery includes: 01x Pallet rack traverse, new Material colour: RAL2004 pure orange Truss type: TB150x50 Agraffe: 5 HK (hook) clear width: 3,600 mm max. load per pair of trusses 2,400 kg, at the same time. distributed load Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. A transport that is also desired or a shipment of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery.

On sale is a complete line for the production of longitudinal and transverse plates. 1. Weinig Dimter high frequency press. 2. Grecon Ultra4 longitudinal line. 3. Line for width connection Obel. 4. Hobelrotoles. 5. Timesavers 1350 mm grinding machine with three units. 6. Planer Schenko (with lifting platform for parcels) + conveyor belt + charger. 7. SLH cold width press. 8. Thermal tunnel for individual packaging of plates. 9. Glue applicator Inles. 10. Glue applicator for slats. 11. Obles line for longitudinal connection of slats.

Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck -Mouth size: Ø 200 mm -Mounting thread: M20 -Gradient: 2.5 mm -Weight: 32 kg