w p used for sale

Protec development machine (wet) Optimax

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder - Stroke: 160 mm - Piston diameter: 40 mm - Piston rod: 16 mm -Price per piece -Quantity: 2 pieces -Dimensions: 325/55 / H55 mm -Weight: 1.40 kg / piece

Paneling Finn-Power Bending Automation Mod. Bending Cell Type BC 2550 200 year 1999 Hours: 27.800 This machine is in good condition and worked for few hours. I point out to you that there is an oil leak wich comes from a cylinder. The machine is functioning and in case of your visit, it can be connected again.

Technical data for the pallet rack traverse: Shelving system: Dexion Type: P90 The scope of delivery includes: 01x pallet rack traverse, used Material color: yellow Truss type: SLB 110/1.5 S320 Box profile: 110 x 50 mm Agraffe: 5 HK (hook) clear width: 1,900 mm load per pair of trusses 2,000 kg, at the same time. distributed load 02x locking pins, used Execution: compl. galvanized For securing the longitudinal members against unintentional lifting

Automation, PLC, switchgear -Type: KFD2-STC4-Ex1 -Manufacturer Part Number: 122580 -Number: 14x available -Price: per piece -Dimensions: 125/115/H20 mm -Weight: 125 g

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-32-300-PPV-A -Piston diameter: 32 mm -Stroke: 300 mm -Pressure: max. 12 bar -Dimensions: 455/45/45 mm -Weight: 1.5 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Type: DNC-50-700-PPV-AQ -Pressure: max. 12 bar -Stroke: 700 mm -Piston diameter: 50 mm -Dimensions: 885/65/65 mm -Weight: 5.5 kg

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...

-) 2-jaw drill chuck 20 mm -) Dowel drilling device with 4-compartment grid 16-32-22-25 mm -) 90° frame stop pluggable -) Miter stop 45° and 22.5° pluggable -) Moving equipment -) Workpiece clamp manual 2 pieces -) Suction connection D 100 mm Optional accessory: -) Gauge in handwheel -) infinitely variable double angle miter stop -) 1 lever operation -) switchable pneumatic stroke for two planes -) Leaser on request

MAN 32.322 chassis, year of construction 1993, 242,000 km, pump Putzmeister 17.50 m with radio remote control, good condition

Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg

Set of 3 high precision angular contact ball bearings, Spindle bearing, 7020 CD/P4ATBTG130, SKF, new Attention: Original SKF product - No replica from… Special price ! If you have a UID number, we will gladly issue an invoice without VAT. New! The part was bought from a spare parts store of a company and has never been in operation, is completely new. Function guarantee! For second hand parts, we can not provide a conventional warranty and guarantee. However, we do provide a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Without Extruder Complete Line for Pipes 63-140 mm Reifenhauser only 20.000 working Hour // very good condition consist of following elements ; 1. 2. Vacuum sizing tank Reifenhauser KKE-R 0125 nr. 70057 3. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 4. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 5. Cooling tanks Reifenhauser KE-R 0125 /6000 nr. 70058 6. Pipe pulling device Reifenhauser A-R 0075 nr. 70059 7. Saw for Pipes Reifenhauser TSQ-R 0075 nr. 70060 8. Marking Machine Medek & Schorner FMS 2R-U nr. 758.45

Continuous/standard drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch) M12 Spindle MK II Drilling depth (mm) 100 Projection (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), distance (mm), dimension width (mm) Number 2, 125, 13/26 Speed display digital Digital drilling depth display Drilling depth stop quickly adjustable stop ring Feed (mm/revolution) by hand Table height adjustment with rack Motor three-phase current 400V with frequency converter (kW) 1.5 Spindle/work surface distance (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drill head hood with ergonomically inclined front LED li ...

Głowice do wytłaczania - pakiet 19 sztuk różnych narzędzi, m.in. Kalibrator głowicy + płyty Głowica + kalibrator 2 x 130 Głowica 250 mm + kalibrator Austria Głowica + kalibrator Duża głowica rozszerzająca + kalibrator Mała głowica rozszerzająca + kalibrator Głowica + kalibrator dla Soffit 2 x 160 głowic Głowica parapetu 260 mm cena za wszystkie narzędzia 60.000 Euro.

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-2580-CNC OT-41 Specifications - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 320 mm - Distance between side frames: 1900 mm - Max backgauge distance: 600 mm - Nominal motor power: 5.5 kW - Weight: 4200.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CN ...

Single-column press with 15 T power suitable for continuous shift operation (a) travel speed 10 mm downwards; b) Opening speed up to 25 mm/sec c) Starting pressing speed 10 mm/sec d) Table size 400x400 mm e) Ram size 200x200 mm, with T slots and central cylinder tension f) Total size approx. 1150x800x1750 mm g) Oil temperature display on the oil tank h) Pressure adjustment from 5 T to 17 T (adjustable via rotary control) i) Two-speed hand lever operation j) Machine body powder-coated, or double painted k) Control cabinet supply cable from above with 3000 mm cable and 16 ampere plug l) Installation, commissioning, instruction against separate charge Press type single-column press Thermally neutral 80 – 120 °C Number of operating pages 1 page Forces Pressing force max. ( at 250 bar ) 150 kN Free tear-off force max. 10 kN Pressure build-up time Closed tool Stee ...

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 30 i Supply voltage 1 x 230 volts Setting range 10 – 30 amps Duty cycle 35 % ED at 30 amps 60% ED at 25 amps 100% ED at 21 amps Current adjustment infinitely variable separation cut 10 mm quality cut 8 mm Cooling inverter by built-in fan Cooling burner compressed air-cooled, 50 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 480 x 165 x 290 mm Weight with burner 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 30 H, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List ...

Machine type plasma inverter cutting machine Make Jess Type JETARC Plasma 45 i Supply voltage 3 x 400 volts Adjustment range 10 – 45 amperes Duty cycle 80 % ED at 45 amps 100% ED at 40 amps Current adjustment infinitely variable separation cut 25 mm quality cut 12 mm Cooling inverter by built-in fan Cooling burner compressed air cooled at 90 ltr/min at 4.5 bar Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 470 x 180 x 230 mm Weight with burner 13 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery plasma cutting system with the following accessories: 1 hand cutting torch FHT-EX 45 TT, 4 mtr. long 1 piece ground cable, 6 mtr. long 1 piece carrying case impact-resistant, waterproof 1 piece instruction manual Warranty 24 months from date of delivery List price dire ...

Scissors for reinforcing steel or bars max 32mm

PVS -Micro-Cut or emulsifiers. Formerly called Kolidmühle For shredding various products Production of emulsions Pastes Sauces Soups and various other products Capacity up to 150 litres Motor power 15 KW

Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.

immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T control - WILA upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion matrices - 2 front support arms movable on linear guide - CE with Fiessler AKAS IIF (automatic height adjustment) - 24 months warranty - Commissioning, training

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

We offer a used sorter of the manufacturer PROMECH for sale. Description of the product: - 108 sorting units - internal roller conveyor with SEW motors - Emergency stop system - 1 automatic scanning system, 3 manual scanning systems Overall dimensions approx.: 44m x 11m, height 2.85m. Machine location: 89-600 Chojnice/Poland Price on request Machine has been tested and is dismantled, stored dry and ready for shipping. If you are interested, please contact us: +48601553406 or biuroregalux.pl

No hidden costs with us The advertisement concerns the basic version of the machine. You can get all prices and extras by contacting our technical and sales representatives. We always provide the final amount on quotes if the contract is signed within the valid period. We always quote the cost of shipping from our warehouse in Poland. Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2700 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2700 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Automatic backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual ...

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 1400 mm -Piston rod: Ø 15 mm -Recording piston rod: M12 x 1.5 mm -Pressure: max. 12 bar -Dimensions: 1570/50/H50 mm -Weight: 8.1 kg

Vertical panel saw with pliers Cutting length 5200 mm Cutting height 2200 mm cutting depth 70 mm Saw blade diameter 300 mm Scoring unit incl. adjustable Automatic sliding erost

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Converter, power supply, power supply, switching power supply -Type: SL20.609 -Input: 3 AC 400 V 50-60 Hz 1.5 A -Output: DC 24 V/20 A -Number: 1x available -Price: per piece -Dimensions: 220/125/H117 mm -Weight: 1.7 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DN-100-125 PPV -Piston: Ø 100 mm -Stroke: 125 mm -Max. Pressure: 12 bar -Pneumatic damping: adjustable on both sides -Dimensions: 126/126/H358 mm -Weight: 8.3 kg

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

Sell Vacuum pump used Type: Busch 250-138, Vacuum: 20 mbar, Motor Oil: Type SAE30, Engine: Delfin, Year of manuf.: 2012, Power 3,45 kW, 230 volts, 15 A,

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DNC-32-160-PPV-A -Piston: Ø 32 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Price: per piece -Number: 2 pieces -Dimensions: 306/45/45 mm -Weight: 1 kg

Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm -Max. pressure: 12 bar Quantity: 1 piece -Dimensions: 365/75/H75 mm -Weight: 2.9 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-63-160-PPV-A -Piston: Ø 63 mm -Stroke: 160 mm -Max. Pressure: 12 bar -Dimensions: 470/75/H110 mm -Weight: 3.6 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Manufacturer: Festo -Type: DNC-80-200-PPV-A -Piston: Ø 80 mm -Stroke: 200 mm -Max. Pressure: 12 bar -Dimensions: 420/95/H95 mm -Weight: 5 kg

Capacity, ton 1250 Stroke, mm 500 Maximum drawing depth,mm 200 Min number of no-load stroke: 14 /per min Slider adjustment, mm 315 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 1250 Table size, mm 1600 x 1800 Slider size, mm 1530 x 1800 Aperture in a table, mm 1100 x 1100 Distance between columns, mm 1600 Cushion travel, mm 200 Cushion capacity, ton 200 Maximum push force ton 31.5 main motor power, kW 125 Press overall dimensions: 5850x3100x8950 mm Press weight, kg 195000

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Festo: DSW-63-200 PPV -Stroke: 200 mm -Piston diameter: 63 mm -Dimensions: Ø 70/430 mm -Weight: 2.5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-32-160 PPV -Stroke: 160 mm -Max. Pressure: 10 bar -Price: per piece -Number: 5 pieces -Dimensions: Ø 38 x 325 mm -Weight: 0.65 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Airtec Pneumatic: XL-040-0125-050 -Stroke: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 53/53/H325 mm -Weight: 1.5 kg

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Festo type: DSW-40-600 PPV-A -Piston: Ø 40 mm -Stroke: 600 mm -Max. Pressure: 10 bar -Price: per piece -Number: 4 pieces -Dimensions: Ø 46 x 800 mm -Weight: 2.15 kg

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA -Quantity: 2 pieces -Price per piece -Dimension: 237/35/H140 mm -Weight: 3.9kg

Centrifugal pump, water pump, immersion pump -Delivery rate: 2 l/min -Motor power: 0.18 kW -Connection: 220-290/380-500 V -Speed: 2700 rpm -Tropicalized: IP 44 -Dimensions: 190/131/H247 mm -Weight: 5.4 kg