w p used for sale

Working width: 220 mm Working height: 120 mm Working height 4-sided: 120 mm Number of Spindles: 10 Spindle arrangement: urlrlououuni Spindle diameter: 50 mm Spindle speed: 6000 rpm Counter bearings: 1-6-7-8-9 Jointer: 1-2-3-4-5-6-7-8-9 Motor powers: 7.5-7.5-11-11-11-15-7.5-11-11- kW Feed speed: 8-80 m/min Feed motor: 18.5 kW Feed: Hydraulic Table lubrication: automatic Weight: 9000 kg Space requirement: 700x160x140 mm Voltage/Frequency: 380V

arm length: 1600 mm tool adaptor: ja fabric-no.: 9787 weight: 4,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 80 KG, 33600 mm, 2150 mm

We offer: Shelving system, used partial quantities possible. Material: 17 double stand frames, approx. 2,150 mm 80 shelves, approx. 2,100 mm Depth of a shelf, 2 x 200 mm = 400 mm Load per floor: 80 kg from stock 21698 Harsefeld. Price valid only while stocks last. Subject to changes and errors.

x-axis: 5060 mm y-axis: 3200 mm z-axis: 1000 mm distance between columns: 2700 mm spindle motor: 22/26 kW spindle turning speed range: 6000 U/min rapid traverse: 15 m/min table-size: 5000 x 2400 mm workpiece weight: 18 t Control: FANUC 31i-MB total power requirement: - kW weight of the machine ca.: 45 t dimensions of the machine ca.: 12,6 x 6,5 x 4,15 m - CNC Control FANUC 31i-MB - Tool Changer 32-fold (BT 50) - 3 axes linear scales - Semi-auto universal head (C axis auto 5 degree indexing) - Extension head - Spindle oil cooler - Air conditioner for electrical cabinet - Hydraulic oil cooler - no coolant thru spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm continious capacity: 25 mm throat: 315 mm bore stroke: 200 mm bore depth: 280 mm spindle taper MT: 4 feed range: 0,1-1,5 U/min number of feeds: 9 column diameter: ca. 230 mm table-size: 700 x 600 mm surface area: 450 x 560 mm distance spindle/base plate: 1100 mm dimensions: ca. 1000 x 700 x 2400 mm total power requirement: 2,6 kW weight of the machine ca.: 1,1 t emergency stop switch renewed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Some small equipment is available. 1) Water treatment system BWT, year of manufacture: 2006, tanks: 2, max. operating pressure: 10bar, max. test pressure: 11bar, max. operating temperature: 50°C, volume: 48l, control system: BWT Soft-Control II. 2) Weishaupt burner L1Z-B, year of manufacture: 2008, power range: 70kW-415kW. 3) Wet cooler. An on-site inspection is possible.

A laminating machine Windmöller und Hölscher, without adhesive and coating unit, is available. Web width: 1420mm, coating width: 1400mm, max. roll diameter: 1000mm, max. roll weight: 1300kg, core inner and outer diameter: 76mm/95mm, max. mechanical speed: 460m/min, min. material thickness: 15mm, max. material thickness: 250µm, total machine dimensions X/Y: 19500mm/2500mm. The machine was used as a rewinder. Documentation available. On-site inspection is possible.

number of spindles: 4 Stk bore capacity in steel (diameter): 25 mm spindle distance: 475 mm table-size: 450 x 1900 mm morse taper: MK 4 total power requirement: 10,2 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used hot air generator with oil burner Ready for operation at the site

Deze watertank is geschikt voor de opslag van drinkwater en vele andere vloeistoffen. De tanks hebben een wanddikte van circa 6 mm. Aan de boven- en onderkant van de tanks kunnen aansluitingen voor inlaat en uitlaat worden aangebracht. De tank wordt geleverd zonder gemonteerde aansluitingen. Maximale inhoud: 3000 liter Diameter: 1450 mm Hoogte: 2050 mm Gewicht: 70 kg Afmeting deksel: 400 mm 2 exemplaren beschikbaar

Woodward 9905-969 Input Module 6 Channel Mint

HOT MICROPERFORATOR, Maximum working width 1.200 mm, Total roll width 1.300 mm., Maximum working speed 80 mt./min, Inner Ø 118 mm., Fitted with n.12 x 100 mm.bronze needle holding pieces, Nr.9 needles/sqcm, needle Ø 1,42 mm. (or bespoke to project),, 380 V 3Ph+N+E 50 Hz., Electric panel with digital thermometer to pre-set the working temperature, You can select the temperature on the different heaters (central and side), Pneumatic system to open/close the perforating roll., Roll rotation when in stand-by posittion, to avoid material overheating, Easy replacimg counter-roll in organic bristle., Micro-metric adjustment of needles pressure in work, The needle-holding roll can be very easily replaced to a different needle pattern., conditions: new machine, type: Hot microperforator for plastic films

Designed for closing Wire-O® bindings up to 430 mm in width. This unit is not equipped with a hanger feeder and is therefore not suitable for calendar production with hangers. However, this machine is perfectly suited for the production of books and other Wire-O® bound documents. Includes a complete set of closing tools for all common Wire-O® sizes (2:1 and 3:1). Technical specifications: Max. binding width: 430 mm Supported Wire-O® sizes: 1/4” to 1” (2:1 and 3:1 pitch) Output: up to 1,000 books/hour Operation: semi-automatic No calendar hanger feeder included Includes full set of closing tools Power: 230 V / 50 Hz / 3 A

- Deck oven Wiesheu electric - 6 shelves each 80x60cm - Double chamber with 1 display each - Each floor with steam function - Power 32.4 kW - With exhaust hood -with proofer -Mobile on castors - Year of construction 2017

In-store baking oven convection oven Wiesheu Dibas 64 blue S + L year 2019 In-store baking oven Wiesheu Dibas 64 blue S (upper oven) - for 5 trays 60x40cm - with electric door - with self-cleaning (cleaning program) - With Wiesheu Comfort control - Year of construction 04 / 2019 - Power 9.6 kW - Voltage 400V 3/N/PE - Frequency 50Hz - Rated current 13.9 A - Water pressure 150-600kPa In-store baking oven Wiesheu Dibas 64 blue L (lower oven) - for 10 trays 60x40cm - with electric door - with self-cleaning - With Wiesheu Comfort control - Year of construction 04 / 2019 - Power 19 kW - Voltage 400V 3/N/PE - Frequency 50Hz - Rated current 27.5 A - Water pressure 150-600kPa Exhaust hood 64 200-240V50/60H - X0564-A-ADBC - 200V-240V - 0.25 kW - 50Hz/60Hz - Year of construction 04/2019 External dimensions of the baking station: 94x105x221cm WxDxH

grinding diameter: 390 mm grinding length: 650 mm centre height: 200 mm workpiece weight: max. 250 kg x-axis: 380 mm z-axis: 1150 mm sanding disc diameter: 400 mm peripheral speed: 20-50 m/sec workpiece spindle stepless: 1 - 650 U/min tailstock quill taper MT: 4 quill stroke: 45 mm dia. of quill: 50 mm total power requirement: 22 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deck oven Wiesheu EBO 6-86L Deck oven Wiesheu EBO 6-86 L - 6 floors are each Wiesheu EBO 86-L - With extractor hood including fan - With base frame - 6 stoves each 80x60cm - each stove with stone top - Digital Wiesheu Comfort control - With fixed water connection - Swath box for swaths - Each floor with viewing glass - Each floor with lighting - Oven is mobile on castors - Tested and cleaned Technical data: - Year of construction 02 / 2015 - Connection each 2 EBO 86-L 10.8 kW - Total connected load 32.4kW - 400 Volt 3/N/PE 50 Hz - External dimensions approx. 114x110x206cm (WxDxH) The furnace is fully assembled and ready for loading in the warehouse.

Model: wölfer 250bkw MDRKF 315X-4 SFB160FUT Serial No.: 192558 Type: 3-phase AC Motor Year: 2014 Voltage: 0-690 V / 690 Y Power: 250 kW Frequency: 50 / 100 Hz Speed: 0-1492 / 2983 rpm Current: 240 / 233 A Power factor (cos φ): 0.91 / 0.94 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB160FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Weight: 1650 kg Standard: EN 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Model: wölfer 175 kw MDRKF 315L-4 SFB160FUT Serial No.: 192557 Type: 3-phase AC Motor Year: 2014 Voltage: 690 V / 690 Y Power: 175 kW / 175 kW Frequency: 50 / 100 Hz Current: 170 / 145 A Speed: 1486 / 2973 rpm Power factor (cos φ): 0.92 / 0.95 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B5 (flange-mounted) Ambient temperature: – 25 °C to + 45 °C Blower: 380 V 50 Hz / 440 V 60 Hz Brake: SFB160FU – 110 V DC Encoder: POG 10 N 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 1380 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

K+G Wetter Bowl Cutter -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) -Stock quantity: 1 -Condition: Used, ready to work

Item condition: in working order Availability: from 31.12.2025 Location: near Hamelin Dismantling: by buyer Number of ovens: 1

In-store baking oven with proofer Item condition: in working order, well maintained Availability. from now on

Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications, a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations., - Model: Tennant 5680 (battery-powered walk-behind scrubber), - Solution tank: 30 gallons / 114 L, - Recovery tank: 40 gallons / 151 L, - Brush motors: (2) 0.75 hp (0.5 kW), - Brush speeds:, - • Disc: 200 rpm, - • Cylindrical: 750 rpm, - Vacuum motor: 0.8 hp, 3-stage, - Battery system: 36 V (Standard ≈ 240 Ah), - Machine weight (with batteries): ~805 lb / 365 kg, - Noise level: ~75 dBA, - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used, Conditi ...

WAFO VS-8 SMART CNC machining center was built in 2022 in Poland by Warszawska Fabryka Obrabiarek WAFO Sp. z o.o. The machine was used occasionally and has worked a small number of hours. The WAFO VS-8 SMART is an excellent choice for both unit and small batch production of precision parts. The machine with its compact design is distinguished by carefully selected components with the best technical parameters, which guarantee outstanding performance over its entire service life. Workpieces with a maximum weight of 150 kg are machined inside a fully enclosed cabin by means of a high-speed spindle and cutting tools taken from a 20-position magazine. Process stability, on the other hand, is ensured by an extremely rigid bed, which eliminates any vibration and oscillation on an ongoing basis. All this is complemented by the extremely easy-to-use SIEMENS CNC control with ShopMill overlay a ...

- Thermal oil boiler - HTT WTÖ 200 - HTT WTÖ 160D - Daub KO 160 - all with oil burner

Three Knife Trimmer With In-Feed, Magazine, Cutting Device, Delivery Belt

Key data: 2 mm, 10 mm

Sheet Straightener 2,000 x 10 mm Execution.. 4high Blechdicje . 3-10 mm Straightening rollers.. 13 pcs. Straightening rollers durcm.. 145 mm Support rollers Duchm 290 mm Weight... 32,000 kg Drive mot... 30 KW

Slitting line 2,100 x 14 mm Bandwidth... 2,100 mm Strip thickness 4-14 mm Coil weight.. 35 tons. Coil Diam. I 508-810 mm Coil Diam. Rewinder 750 mm Coil A Dia. 2,000 mm Knife shafts diameter 380 mm Connected load 660 KW

Key data: 2 mm, 12 mm

Cut-to-length line 2,000 x 12 mm Bandwidth. 2,000 mm Tape thickness... 4-12 mm Coil weight 30 tons. Straightener 11 reels Speed 15 m/min. Main Engine. 200 KW Voltage. 380 V / 50 Hz.

Type AL 200 SD, inlet/outlet 200 mm, housing full stainless steel 1.4408 - flange connection DIN PN 10, Rotor volume 10.5 liters, direct heat SEW 0.55 KW, discharge speed 20 rpm

Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible.

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 window system ---------------------------------------------- Manufacturers description: For the production of individual parts, elements, and small series. Spindle arrangement: One cross-cutting saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning and slotting spindle, and profiling spindle suitable for holding multiple tools stacked on top of each other, with pneumatic spindle movement. Slotting table with motorized table movement and automatic transfer to the continuous, chainless rubber roller feed of the profiling unit. Feed height adjustment manually. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifying glass for frame or sash external dimensions. Tool positions (longitudinal and transvers ...

Offer 25425 Technical data - Motorized upper roller 175 x 30 mm - Continuous lower rollers 250 x 50 mm - Upper roller can be delivered by handwheel - Top roller diameter 175 mm - Lower roller diameter 250 mm each - Projection 1100 mm - Distance base plate – lower roller 1520 mm - Drive 400 V - Space requirement approx. W 900 x H 2650 x D 2000 mm - Weight approx. 1500 kg

General SKU335X731 LocationBarneveld CEcheck MakeGEA Westfalia AG TypeCSC 20-06-476 Main Features MaterialStainless steel Capacity1000 Ltr./Hr. Motor11 KW Specified Features - Separator Separatorcheck Capacity500-1000 Ltr./h Motor11 kW 400/690 V 1460 rpm Max. rotor speed8320 rpm Self-dischargingcheck InletDN40 Liquid outletDN50 Solids outletDN125 Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) Information No.1722-676 Year of construction2002 Mounted on mild steel framecheck Stainless steel frame With switchgearcheck Floorspace2,50 x 1,40 m Total height2,50 m Extra Specifications With stainless steel overflow vessel, volume 55 L: jacket volume 10+16 L. allowable temperature 20/+145°C, allowable temperature jacket, 2/+20°C, : Hot vessel, volume 30 L: allowable temperature +140°C, : Siemens touchscreen control, type Simatic mult ...

Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible.

An old steam boiler Loos including a relatively new Weishaupt burner is available. 1) Steam boiler Loos UL-S, year of manufacture: 1991, steam output: 6000kg/h, max. operating overpressure: 13bar, boiler volume: 6380l. 2) Weishaupt burner G50/2-A, year of manufacture: 2013, output range: 600kW-5400kW, connection pressure range: 15mbar-500mbar. Documentation available. An on-site inspection is possible.

Large steam generator LOOS, type: UL-S including gas burner WEISHAUPT G50/2-A - LOOS steam generator, built in 1991 for 6,000 kg of steam / h - Steam capacity: 6,000 kg/h - WEISHAUPT burner, built in 2013 - Burner power: 600 - 5,400 kW Viewing possible on request.

Inv. Num. : 8888 Type: WRC-8VC Producer: BERO Created: 2007 Parameters: Sealing seam width (bag width): 160-800 mm Extension length (bag length): 285-1820 mm Number of lines: 2 Maximum speed: 200 m/min Bags per minute: 200 1/min Type: Pouch Making Machine for Pouch on Roll Production type: Bottom-sealed garbage bags on roll with tear-off perforation Processable materials: LDPE/HDPE and recycled materials

An originally packaged Weishaupt burner is available. Thermal output range: 145kW-570kW, flame head: W40/1, typical pump pressure setting: 12bar, weight: approx. 40kg. Documentation available. An on-site inspection is possible.

Used decanter centrifuge manufactured made by Spomasz Wronki type AWP 40-3.6. New: 1985 / 2000. Gear ratio: 159. Maximum gear load torque: 4,900 N·m. Max. drum speed 2900 rpm. Weight 3200 kg. 2 pieces available.

General SKU293X394 LocationBarneveld CEcheck MakeIka Werke TypeRW 47 D Main Features MaterialMild steel Motor0.37 KW Specified Features - Stirrer Stirrercheck Without mixing shaftcheck Without stirring headcheck Motor0.37 kW, 380-420 volt, 2870 rpm With variable speed drivecheck Speed mixing shaft57-1300 rpm Mounted on supportcheck Adjustable heightcheck MaterialMild steel Information No.01.490534 Year of construction2001 Mounted on wheelscheck With switchcheck Floorspace1,40x1,00 m Total height2,02 mStirrersIKA WerkeMixers > StirrersBrand > IKA Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

x-travel: 1200 mm weight: 2 t : ja milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A conventional lead and feed screw lathe Weiler without safety components (e.g. spindle guard) is available. Center distance: 800mm, center height: 155mm, spindle bore: 38mm, swing diameter over bed/bed slide/cross slide: 330mm/290mm/170mm, max. workpiece weight: 100kg, spindle taper: MK5. Faceplate diameter: 300mm, chuck diameter: 165mm, speed: 2800rpm, quill stroke: 110mm, quill diameter: 50mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1300mm, weight: approx. 1050kg. On-site inspection is possible.

Saw blade diameter: 630mm, max. material diameter: 200mm, max. material dimensions X/Y: 185mm/185mm, cutting speed: 170m/min, min. cutting range: 25mm, max. saw carriage stroke: 242mm, max. saw carriage feed: 650mm/min, max. saw carriage rapid return: 5m/min, saw blade clamping flange diameter: 160mm, clamping force vertical/horizontal: 52kN/12kN, section clamping stroke: 520mm, section length range: 25mm-1000mm, working height: 800mm. Documentation available. On-site inspection is possible.

General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

temperature max.: ° internal length of the oven: mm internal width of the oven: mm internal height of the oven: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DME Small Keg Washer - Second Hand CAPACITY: Fills up to 20 or cleans up to 14 kegs per hour (2 station) Fills up to 40 or cleans up to 28 kegs per hour (4 station) SPECIFICATIONS: Individual on / off valves allow filling of one to two or to four kegs (depending on head capacity) at the same time 3600 RPM s/s pump mounted on cart CO2 manifold with valved inlet / outlet and pressure gauge All stainless steel manifolds Portable stainless steel cart with locking casters Motor starter, on/off switch, 20 ft (5m) cord Keg cleaning support racks at 3'6" (1.070m) Counter pressure manifold with bleed off 1 ½” tri clamp connector for kegging tank outlet to filler hose This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

General SKU293X467 MakeMiele LocationBarneveld CEcheck TypeG7826 Main Features MaterialStainless steel Motor10 KW Specified Features - Miscellaneous MaterialStainless steel Motor10 kW, 400 volt Information No.00/74340434 Year of construction2009 Floor space0,90x0,80 m Total height1,95 m Weight505 kg Extra Specificationsusefull size inside chamber: 600x560x650 mmMiscellaneousMieleMiscellaneous > MiscellaneousBrand > Miele What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

x-travel: 4216,0 mm y-travel: 2007,0 mm z-travel: 305,0 mm control: CNC table-size: 4902,0 x 2134,0 mm max. workpiece weight: 1465 kg / m² machine weight ab.: 2500 kg total power requirement: 30 kW dimensions of the machine ca.: 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel hig ...