We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,597 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Boring head, spindle head, drill head, grooving head, grooving head, spindle drilling head, boring head, spindle tool -Spindle head: spindle tool for bench type boring mill, plate type boring mill, tilt adjustable -Stroke: 225mm -Shaft: Ø 50 mm -Dimensions: 330/170/H415 mm -Weight: 48kg
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63 / 86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / thread Ø28 x 25 mm -Cylinder: outside Ø 75 mm -Mounting: bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2x cylinders available -Price per piece -Dimensions: 370/140 / H145 mm -Weight: 11 kg / pc.
used
Heat exchangers, building heating, building dryers, heating, hall heating, hot water exchangers -Can be used in conjunction with Wacker Neuson HP 252 as hall heating/building heating, not included -Type: HX 60 -Power: 43.5 kW -Number: 8 pieces available -Price: per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg
used
Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg
used
Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg
used
High Pressure unit Hammelmann HDP 504 Year of construction 2021 Operating pressure 2200 bar Flow rate 122 ltr Power 490 kW Operating hours 880 h engine CAT C 18, Level 5 TIER 4F Power 565 kW in Truck, Used Truck Scania 164 L V8, 480 YoM 2004 Power 353 kW 802,500 km
used
Nominal force: 3150kN, table dimensions: 2500x1600mm, stroke speed: 20-80/min, ram stroke: 280mm, ram adjustment: 90mm, weight: 68t, with Transfer and Sheet Metal System Dreher.
used
General SKU052I248 LocationBarneveld MakeSeitz TypeRZ 30.A.CW No.1583 Year of construction1972 Pressure Working pressure3 Bar Working pressure jacket3 Bar Main Features MaterialStainless steel Surface1.5 m2 Specified Features - Horizontal plate filter Plate filter(1x) Filter surface1,5M² Number of platens26 Platen sizesDia.300mm With jacket24,5Ltr. Max. temperature150°C. MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) Information Total heightDia.0,8m Weight1,7M Extra SpecificationsVessel capacity 92 ltr., with extra platens Horizontal plate filtersSeitz - WerkeFilters > Horizontal plate filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. ...
used
General SKU245P322 LocationBarneveld MakeSeitz-Werke GmbH (DE) TypeRZ 60A KC Year of construction1975 Pressure Working pressure6 Bar Main Features MaterialStainless steel Surface1.75 m2 Cake3.5 Ltr. Specified Features - Horizontal plate filter Plate filtercheck Filter surface1,75 m2 Number of platens11 Platen sizesdia.600mm Max. temperature165 degr.C. Cake capacity3,5 Ltr Capacity270 Ltr MaterialStainless steel 1.4571 (316Ti) Information Mach.No.1701 Mounted on legscheck Floorspace1,0x1,0 M Total height1,8 MHorizontal plate filtersSeitz - WerkeFilters > Horizontal plate filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many m ...
used
General SKU004Y029 LocationBarneveld MakeSeitz TypeEF 100/500 CW No.8402 Year of construction1969 Pressure Working pressure3 Bar Working pressure jacket6 Bar Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Horizontal plate filter Plate filter/Pressure filter (1x) Filter surface0,75 M2 Number of platens1, Capacity 580 Ltr Platen sizesdia. 980mm Liquid outletdia. 50mm With jacket(13 + 7 Ltr) Max. temperature165 Degr. C. MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace1,5x1,5 M Total height2,1 MHorizontal plate filtersSeitz - WerkeFilters > Horizontal plate filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlan ...
used
General SKU316S529 LocationBarneveld MakeWaukesha Cherru-Burrell (US) TypeVotator II (6x48) No.A7149 Year of construction2004 Pressure Working pressure41.4 Bar Working pressure jacket17.2 Bar Main Features MaterialStainless steel Motor22 KW Surface3.36 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel Scraped surface heat exchanger(4x) Number of stages:4 Heating surface3,36 m² Cylinder sizesdia. 370x1170 mm Max. temperature204/-29 °C With jacketcheck Inletdia. 71 mm Outletdia. 71 mm Motor18,5 kW 400/690 Volt (3x), 22 kW 400/690 Volt Speed232 rpm Information Mounted on framecheck Total height2,3 m Weight4000 kg Floorspace3,4x2,1 m Extra SpecificationsWith cooling system: 2,2 kW 380/415 Volt (4x) and Samson control valves (4x), type: 0277-02101.Scraped surface heat exchangersWaukeshaHeat exchangers > Scraped surface heat exchan ...
used
General SKU028Y181 LocationBarneveld MakeSeitz Werke TypeRZ-60 A-KCW No.1724 Year of construction1976 Pressure Working pressure6 Bar Working pressure jacket6 Bar Technical specs Capacity270 liter Main Features MaterialStainless steel Surface3 m2 Specified Features - Horizontal plate filter Plate filter(1x) Filter surface3,0 M2 Number of platens11 Platen sizesdia. 600mm, Vessel dia. 690x725mm With jacket(36 Ltr) Max. temperature165 Degr. C. MaterialStainless steel 1.4571 (316Ti) Information Mounted on legscheck Floorspace1,0x0,9 M Total height1,8 MHorizontal plate filtersSeitz - WerkeFilters > Horizontal plate filtersBrand > Seitz - Werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...
used
Description: Technical details: Brinell 15.625, Rockwell 60-150 HRC, projection 130 mm, additional information: completely overhauled: 09/2000, conventional hardness testing machine according to Vickers and Brinell, manufacturer: WOLPERT, type: Dia-Testor 2Rc (1-lever device), test load levels : Vickers: ( 1 / 2 / 3 ) 5 - 10 - 20 - 30 - 40 - 50, Brinell: 15.625 - 31.25 - 62.5 - 125 - 187.5 - 250, Rockwell: 10 preload - 60 ( HRA) - 100 (HRB) - 150 (HRC), load levels for Vickers marked above can only be calibrated to a limited extent. The different load levels are set using load selection pushbuttons. Test space (H/D): 300 / 130 mm Approx. Onsite Dimension. (l x w x h): 940 x 350 x 620 mm, weight approx.: 200 kg
new
Hammelmann Pump HDP 503, NEW Operating pressure 1600 bar, Flow rate 166 l/min Revolutions 1800 1/min
used
Description: dividing head Diameter 200mm Height 105mm Machine weight approx. 25 kg Space requirement approx. 400 x 280 x 150 mm weight approx.: 25 kg, Approx. Onsite Dimension. (l x w x h): 400 x 280 x 150 mm
used
Description: ENGINE John Deere engine with 230 h.p.,  ,6 cylinders and 6800 c.c TECHNICAL DATA. Machine weight without headstock: 23.500 tons. approx Width of the machine: 2900 mm. Leveling cabin Crane outreach: 14.300 mm Newson series no: AB02751 FM 60 head with serial no.: 94011004 Head weight: 1400kg Hours according to counter: 19.714 hours approx ,  ,  ,  ,  ,IMPORTANT The buyer is responsible for all related loading of the equipment. The machine is loaded by its own means. , Is needed a , platform ,truck Approx. Onsite Dimension. (l x w x h): 11,250 x 2,950 x 3,600 mm, Vehicle identification number: AB02751, weight approx.: 24,700 kg
used
Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.
used
1 x Wickert 500ton upstroke vacuum press, Type: WKP5000/5/3, Year of manufacture: 1997, Machine Number: 2885 with 500mm x 500mm electrically heated platens, sliding bottom platen with ejector table, Daylight: 340mm 400/690V, 50Hz, 22kW. Heaters 12.5kW, Pressure 300 Bar Fixed guarding to rear, SICK light curtain guards to the front. With Siemens S5 PLC controls. In very good condition.
used
Current stock: approx. 400 pcs. Included in delivery are: 01x castor, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.556 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...
used
Current stock: approx. 370 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 150 mm Rolls Ø: approx. 125 mm Roll width: approx. 40 mm Roll material: Polyamide Plate abbreviation: approx. 102 x 87 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.745 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of deli ...
used
Current stock: approx. 53 pcs. Included in delivery are: 01x Bockrolle, used Manufacturer: Wicke Type: 01 Material color roll: cream white Material color frame: sendz. galvanized Specifications: Total height: approx. 100 mm Rolls Ø: approx. 80 mm Roll width: approx. 35 mm Tire Material: PA6 Plate abbreviation: approx. 100 x 85 mm (WxD) Hole Ø: approx. 9 x 11 mm ( oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 60 mm (middle - middle hole) Weight / pcs.: approx. 0.370 kg Advantages to PA wheels: - The PA wheels are very low in wear. - They leave no traces on the ground. - PA wheels have a very low rolling resistance. General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery ...
used
Now available: Wartsila 32 (original) cylinder heads reconditioned Cylinder heads are pressure tested and come with Class certificate Available from stock (ex Warehouse Bengi NL) Price upon request
used
Make: WEGER Type: AL 96 Built: 1999 Power: 6700 m3/h Current consumption: 7.65 A 2 pieces Available Price on request Contact details can be found under Contact
used
turning diameter over bed: 3000 mm turning diameter over slide rest: 2650 mm turning length: 19000 mm Control: Siemens type: 840 C mm faceplate: 2500 mm turning speeds: 0,65-99,2 U/min Rest: 2 steady: 2400 mm steady: 900 mm steady: 900 mm steady: 500 mm main drive motor: 180 kW workpiece weight: 100 t chip conveyor: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
We have 8 pieces of L32 cylinder heads in our stock in Istanbul Nearly brand new condition with very low working hours crack tested and water pressure tested free of cracks or welding We also have pistons , liners , con rods, fuel pumps and more ... please contact us at: info@fin-marine for more information
Rollers for SM 52-2 2 new application roller d 64.5 _____250 EUR /pcs. 2 new application roller d 61 _____244 EUR / pcs.
used
Tool holder, extension -Shaft mount on both sides: Ø 71 mm -Drawing with the pictures -Transport dimensions: 1650/800/H450 mm -Weight: 370 kg
used
Scope WTE 35 hot runner control unit – multiple unit with 5 plug-in controllers And plug-in connection cables (optional) – see pictures Tested and cleaned under control conditions (hotrunner use) – all controllers OK – as of 18.7.23 Price (without cable) € 1550.-- & VAT .- exWorks Price (with cable) € 1750,-- & VAT .- exWorks Disclaimer: Sale only to commercial customers. The device described here is a used device. A function check has currently been carried out / tested and cleaned under control conditions (hotrunner use) - all controllers OK - as of 18.7.23! The sale is made to the exclusion of any warranty, guarantee, UVV, TÜV, etc. The seller excludes any liability for material defects. Inspection of the used device is possible by appointment - please send appointment requests by e-mail to: infohausmann-gbr.de A return of the purchased device i ...
used
Weiss climatic test chamber with humidity -72°C to +180°C approx. 335 liters WK3-340/70 Already upgraded to the new R452A refrigerant Here we offer a Weiss climate test chamber. Air-cooled Temperature Testing Volume 335 liters Test Chamber Dimensions: Test chamber dimensions: height 750 mm, width 580 mm, depth 765 mm External dimensions: height 1775 mm, width 870 mm, depth 1600 mm Minimum temperature –72°C Maximum temperature +180°C Temperature change speed, cooling 3 K/min Temperature change speed, heating 3 K/min Temperature deviation, timed ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ±1.5 K Climatic test: Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH Temperature deviation, time ± 0.1 to ± 0.3 K Temperature homogeneity spatially ± 0.5 to ±1 K Moisture deviation over t ...
used
Key data: 8000
Wartsila Diesel / HFO Fuel Generator set Power 8Mw Year of Manufacture 2001, Running Hours around 20k.
used
Description Very well-preserved high-performance roller lathe WALDRICH SIEGEN. Refurbished in 2012 for € 595,000.00, with R&D control and functional guarantee. Details Type WKDF 900/15 Kop. Machine number 14183 Built in 1971 Bed width 1,610 mm Bed height 670 mm Bed length 7,670 mm Headstock center height 600 mm Face plate Ø 920 mm Clamping range 200 - 630 mm Support max. copying depth with largest turning diameter 250 mm Tailstock quill adjustment 100 mm Quilles Ø 300 mm max. workpiece length 4,000 mm max. workpiece weight 15 tons Additional Accessories Copying Device incl. documentation
used
pressure:160 t throat:360 mm stroke:500 mm Documents:vorhanden
used
Description: Heavy duty castors, 2 parts Total load capacity 24t. with turntable Load capacity 2 x 12000 kg Wheel diameter 75 mm Total height 105 mm Weight 40kg Dimensions L x W x H 500 x 300 x 250 mm Approx. Onsite Dimension. (l x w x h): 500 x 300 x 250 mm, weight approx.: 40 kg
used
Complete boiler system Weiss Year of construction - 1989 Power - 2500 kW For very wet chips incl. bark Water content - about 12500 l Water temperature - 120 degree Automatic chips infeeding with walking floor Movable sliding floor Day storage tank Automatic hydraulical ash removal Cyclon for dust separation Complete controling system Well maintained, excellent condition
used
Heavy duty lathe Waldrich Distance between centers: 12000 mm Turning diameter: -Over bed: 2000 mm -Over cross slide: 1640 mm Weight of work piece: max 40 ton Spindle speed range, stepless: 1,5-92,5 rpm Year of manufacturing: 1960
used
Cylinder head Exchange
new
- max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 170 mm - min Werkstücklänge 250 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 4000 Upm. - Messerwellen FI 100 mm, Z 4 - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen L=2200, B=900, H=1700 mm - Gewicht 1900 kg
new
- max. Hobelbreite 610 mm - min. / max. Hobelhöhe 8 / 200 mm - min Werkstücklänge 250 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 4000 Upm. - Messerwellen FI 100 mm, Z 4 - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 10,0 kW - Motor untere Welle 7,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 19,5 kW - Absaugstutzen FI 130 mm - Arbeitstisch 685 x 2185 mm - hart vercromte Tische - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen L=2200, B=1100, H=1720 mm - Gewicht 2500 kg
new
Technische Daten: - min./ max. Sägeblattdurchmesser 100 mm / 750 mm - min. /max. Sägeblattbohrung 16 mm / 55 mm - Zahnteilung 7 - 100 mm - max. Sägeblattstärke 6,0 mm - Vorschubgeschwindigkeit 25 Zähne / min. - Schnittwinkel -10C / + 30C - Gesamtleistung 3,0 kW - Schleifscheiben Durchmesser 100 mm - Schleifscheibenbohrung Durchmesser 25 mm - Motor Schleifaggregat 0,75 kW - Leistung der Kühlmittelpumpe 35 L/min. - Spannung 400 V / 50 Hz - hydraulisch angetrieben, Microprocessor gesteuert - für Brust- und Rückenschliff - Planschleifen von Zähnen in einem Zyklus - hydraulische Sägeblatt Klemmung - Schutzkabine - einfache Steuerung für einfache Bedienung - unabhänig voneinander einstellbare Schleif- und Vorschubgeschwindigkeit - Abmessungen L=1100, B=1500, H=2100 mm - Gewicht 800 kg
new
Technische Daten: - min./ max. Sägeblattdurchmesser 100 mm / 800 mm - min. /max. Sägeblattbohrung 16 mm / 55 mm - Zahnteilung 7 - 100 mm - max. Sägeblattstärke 6,0 mm - Vorschubgeschwindigkeit 25 Zähne / min. - Schnittwinkel -10C / + 30C - Gesamtleistung 3,0 kW - Schleifscheiben Durchmesser 100 mm - Schleifscheibenbohrung Durchmesser 25 mm - Motor Schleifaggregat 0,75 kW - Kühlmittel Motor Kapazität 35 L/min. - Spannung 400 V / 50 Hz - hydraulisch angetrieben, Microprocessor gesteuert - für Brust- und Rückenschliff - Planschleifen von Zähnen in einem Zyklus - hydraulische Sägeblatt Klemmung - einfache Steuerung für einfache Bedienung - unabhänig voneinander einstellbare Schleif- und Vorschubgeschwindigkeit - Abmessungen L=1100, B=1500, H=1800 mm - Gewicht 800 kg
new
Technische Daten: - max. Hobelbreite 405 mm - min. / max. H obelhöhe 8 / 200 mm - min Werkstücklänge 100 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 5000 Upm. - Spiralmesserwelle mit HM-Wendeplatten 15x15x2,5 mm, FI 100 mm - Vorschub stufenlos regelbar 8 - 24 m/min. - Motor obere Welle 7,5 kW - Motor untere Welle 5,5 kW - Vorschubmotor 1,5 kW - Motor Höhenverstellung 0,5 kW - Gesamtleistung 15,0 kW - Absaugstutzen FI 130 mm - Arbeitstisch 482 x 2185 mm - hart vercromte Tische - motorisch angetriebenes Transportband im Einlauf - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - CE Konformität - Abmessungen mit Transportband L=3570, B=900, H=1700 mm - Transport Abmessungen L=2650, B=950, H=1850 mm - Gewicht 2100 kg
new
Technische Daten: - max. Hobelbreite 1020 mm - min. / max. Hobelhöhe 10 / 200 mm - min Werkstücklänge 310 mm - max. Spanabnahme obere Welle 5 mm - max. Spanabnahme untere Welle 5 mm - Drehzahl Messerwelle 5000 Upm. - Spiralmesserwelle oben + unten mit HM-Wendeplatten 15x15x2,5 mm, FI 100 mm - Vorschub stufenlos regelbar 7 - 20 m/min. - Motor obere Welle 30,0 kW - Motor untere Welle 22,0 kW - Vorschubmotor 7,5 kW - Motor Höhenverstellung 1,0 kW - Gesamtleistung 57,7 kW - Absaugstutzen FI 150 mm - hart vercromte Tische - schnell Wechselvorrichtung für Hobelmesser - Gleitmittelpumpe - elektronische Werkstückstärken Einstellung - Digitale Anzeige der Werkstückhöhe - 2 Einzugswalzen im Einlauf + 2 Auszugswalzem im Auslauf - Scheibenbremse - CE Konformität - Gewicht 3500 kg
used
Horizontal round table - with bearing tracks Bearing tracks can be easily removed, Geraet fully ready for use without restrictions! Diameter 600mm construction height 140mm Partial setup via angular scale It's immediately available. Further horizontal parts available, please ask price. If you are not able to see what you need, please ask, we have not put the whole stock in place and probably the right one in stock. - Diameter 500mm built-in height 120mm with direct pitch over cam and angle scale - 2 pcs. diameter 400mm, can be used horizontally and vertically, indirect pitch for discs, once as good as new, once with bearing tracks Vertical sub-cameras and universal horizontal / Vertical pivoting sub-cameras 1. Walter with three-jaw lining 2. Lid with three-jaw lining and counter holder Special price
used
-Spindle diameter 160 mm -Spindle SK 50 DIN 69871 - spindle power 90 kW -X-axis 16,000 mm -Y-axis 4.455 mm -W-axis 900 mm -Z-axis 800 mm
used
Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg
used
Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h
used
Cylinder head Wichmann AX AXG AXAG
used
Cylinder head, Vasa 32 Low Nox Including valves, springs and rotocaps Part no: 120055
used