w h used for sale

x-travel: 19000 mm y-travel: 7600 mm z-travel: 2000 mm w-axis: 5000 mm table surface area: 18500 x 5000 mm table load: max. 500 t distance between columns: 5500 mm power capacity - milling spindle: 110 kW tool taper: CAT #60 Control: FANUC 15i MB total power requirement: - kW weight of the machine ca.: 650 t Overhauled & modernized in 2007 equipped with: - CNC control FANUC 15i MB - 5 heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TO WHOM IT MAY CONCERN ; WE VE RECON GOVERNOR WOODWARD UG - 8D AT OUR STOCK. PLS FIND DETAILS ON BELOW. REF NO : 8525 - 620EG GOVERNOR SPEED. : 600 - 1560 SERIAL NO : 2384814 EX STOCK AT IZMIR TURKEY . IT IS READY TO SHIPMENT IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 aliagamarine.com TURKEY

Immediately available completely overhauled injection pump

Ready to ship recon camshaft

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used exhaust pipe

Immediately available used Pneumatic emergency stop

Immediately available completely overhauled shop air coolers

Immediately available used injection line

- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Cable length: approx. 6m -Weight: 150 kg

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of shaker bottles: 1 piece -Cable length: approx. 6 m -Weight: 72 kg -Functionally tested

Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Number of vibrating bottles: 1 -Cable length: approx. 6 m -Weight: 105 kg

Immediately available used fuel transfer pump

Immediately available used lubricating oil coolers

Immediately available overhauled lubricating oil pump, even used ones we have all in stock

Immediately available used idler gear

Immediately available used intermediate gear

Immediately available used gear camshaft

Immediately available used fuel double filter

Immediately available used exhaust gas compensator

Immediately available overhauled gas-oil flow covers, also used ones we have all in stock

Used crankshaft immediately available

Immediately available new

Immediately available used emergency shutdown

We offer: a construction dryer Make: Wilms Model: Heating Cannon Heater Hot Air Blower Construction Dryer Nominal voltage/ current type: 220 V Fuel: Fuel oil Subject to changes and errors. Sale under exclusion of any warranty and liability for material defects.

Fiber optic measuring amplifier, fiber optic sensor, fiber optic cable sensor, universal reflex sensor, reflex sensor -Manufacturer: Wenglor, fiber optic cable sensor unused in original packaging -Type: UF87PA3 -Number: 3x sensors available -Price per piece -Dimension box: 105/90 / H40 mm -Weight: 0.2 kg / pc.

live center, live center point, live Morse taper, live center point, live lathe center, center point, centering taper -Manufacturer: WMW, live centering tip, 2 pieces -Type: ZN 205 -Recording: MK5 -Price/Sale: complete -Overall dimensions: 270/190/100 mm -Weight: 10 kg

Shell cutters, shell cutters, milling cutters, shell-type milling cutters -Manufacturer: WMW, shell mill -Inside: Ø 32/14 mm -Dimension: Ø 96 x 47 mm -Weight: 1.5 kg

2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Punch tool: 2 columns -Mounting: Bolt Ø 40 mm -Die stamp: see photos -Dimensions: 690/290/H290 mm -Weight: 61 kg

bore capacity in steel (diameter): 4 / 6 mm turning speeds: 650 - 12.000 U/min table surface area: 180 160 mm spindle cone: B 10 bore stroke: 50 mm total power requirement: ? kW weight of the machine ca.: 50 kg dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEINGARTEN DE 200-20 press built in 1975 in Germany is used for precision workpiece machining. The rigid construction combined with a high press force of 200 tonnes make the machine the perfect solution for mass production of various types of parts. The process of precision sheet metal pressing can be fully automated when the WEINGARTEN press is retrofitted with a sheet metal feeder. Technical specifications of the WEINGARTEN DE200-20 200 t press - press force: 200 t - maximum slider stroke: 200 mm - minimum slider stroke: 15 mm - maximum number of slider strokes: 60/min - minimum number of slider strokes: 20/min - slider adjustment: 110 mm

Condition: used, ready for use Year of manufacture: 1998 Control: Siemens 840 C Travel X/Y/Z: 2x600 or 1x1,800 / 425 / 400 mm Main spindle: SK40 / 7,500 rpm / 106 Nm / 14 kW / IKZ Rapid traverse: 40 m/min Tool changer: 36-speed Dimensions W/H/D: 5,100 / 3,000 / 2,900 mm Weight: 9,500 kg

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg / pc.

Cardan shaft, cardan shaft, universal joint -Cardan shaft: universal joint, unused -Type / order no .: 21001375 402027/201 7610AVA10 -Shaft: Ø 36 mm -Measurements: see photos -Number: 15x universal joint available -Price per piece -Dimensions: 120/62 / H56 mm -Weight: 1.1 kg / pc.

Drive shaft, cardan shaft, universal joint -Cardan shaft: Universal joint, unused -Type / Order No.: 21001375 402027/201 7610AVA09 -Shaft: Ø 24 mm -Dimensions: see photos -Number: 4x universal joints available -Price: per piece -Dimensions: 102/46/H50 mm -Weight: 0.6 kg/pc.

spindle diameter 130 mm - ISO 50 tool - rated power of the spindle rotation motor 18.5 kW - installed power 4 0kW - spindle drive motor speed range 722-1455 rpm - spindle rotation range 2.25-900 rpm, 27 degrees - disc rotation range 2.25-180 rpm, 18 degrees - X axis feed speed range 0-5000 mm/min, stepless - Y axis feed speed range 0-5000 mm/min, stepless - Z axis feed speed range 0-3150 mm/min, stepless - B axis feed speed range 0-4000 mm/min, for Ø1m, steplessly Bg2Ltmk8Gq - machine weight 30 t

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW ABW, tapping chuck holder MK2 with 5 pieces of holders -Type: GB2 M5 - M16 -Dimension: O 62 x 192 mm -Weight: 1.8 kg

x-travel: 13000 mm y-travel: 2750 mm z-travel: 3000 mm turning speeds: 600 U/min spindle taper ISO: 50 milling head: 4 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

1 used in-store baking oven Wiesheu B8-E2, in baker's condition, for 10 trays, with base frame and steam condenser, Ser.-No. 10205286, 26.6 A, 18.4 kW, 400 V, 50 Hz, water pressure 150-250 kPa

1 used shop baking oven Wiesheu 2 x B4-E2, in baker's condition, 2 x 5 trays, with base frame and steam condenser, Ser.-Nr. 10144101 and 10144102, 13 A per module, 9.2 kW per module, 400 V, 50 Hz, water pressure 150-250 kPa

Wartsila 12V32LN Crankshaft Suitable for 12V32 Vasa type Free Of cracks or welding With measurement reports available 1 pcs in our istanbul Stock

Gear motor, electric motor, electric gear motor -Manufacturer: Watt Drive, gear motor type HG OKG 71N4 -Speed: 246 rpm -Power: 0.37kw -Torque: 14.4 Nm -Shaft: Ø 20 x 40 mm -Protection class: IP55 -Dimensions: 400/170/H210 mm -Weight: 15kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: MW Markisches Werk, hydraulic unit with container -Type: 1324 -Shaft: 12 x 8 mm, see photo techn. drawing -Individual components: see photos -Dimensions: 280/270/H450 mm -Total weight: 9.8 kg

Vibrating plate, vibrator, vibration plate, soil compactor, construction vibrator -Manufacturer: Weber, vibratory plate type TC 66 S -Motor power: 6.3 kW -forward/backward- lever position reversed -Engine: Hatz small diesel engine type 1D41S -Operating weight: 430 kg -Dimensions: 900/580/H1450 mm -Total weight: 454 kg

Press force max.:: 1600 kN heating plates:: 400 x 400 mm electrically heated:: -- °C heating power:: 9,92 kW piston stroke:: 400 mm no. of stages:: 1 Condition: Used, Specification: Press 400 x 400 mm, second-hand steel frame construction - Clamping force: 160 tonnes - pressure force: 1600 kN - Operating pressure: 300 bar - Closing: from bottom to top - Heating platens: 2 electric platens - Heating power: 4.96 kW/platen - Heating platen dimensions: 400 x 400 mm - Specific pressing pressure: 1000 N/cm² - Distance between the heating platens: 500 mm - Piston stroke: 400 mm - Piston diameter: 260 mm - AC motor power: 7.5 kW - Pneumatic protective cover in the front area, - lifting device - Sliding table - Approx. dimensions: 1,760 x 1,150 mm - System height approx.: 2,470 mm - Weight approx.: kg The data for this ad was cr ...

Sensor actuator distributor, distributor strip, interface, sensor actuator distributor, sensor actuator -Manufacturer: Weidmuller, sensor-actuator-distributor ovp -Type: SAI-8-M 5P M12 170125 -Dimensions box: 175/65/H50 mm -Weight: 0.3 kg