129,047 used machines on RESALE, but how to find them? Machine Search
WTT 180° degree roller cam 640-600 IR500 RA1803 Technical data: Framework width (NB): 640 mm Roll width (EL): 600 mm Roller pitch: 5:6 Rolls: 50mm, galvanized pitch (Tlg): 105 mm Conveying angle: 180° degrees Inner radius (IR): 500mm Overall height (BH): 80mm top edge of rollers Side guide outside: 185mm Drive: without Supports: without Construction: frame painted gray, rollers galvanized Optionally available: Supports: 70,00 Euro plus VAT / piece All prices plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Nominal / inner radius in mm: 500 Nominal / outside width in mm: 640 Roll width in mm: 600 (Nutzbreite) angle: 180° Driven: NO scope of delivery: without supports For individual, professional advice, simply get in touch with us. Simply contact us by phone or by mail. We will be happy to help you with the planning ...
Type 1325 Useful working area axis X-Y-Z 1300-2500-200 mm Spindle, air-cooled, 6kw, 18000 rpm. Engine Hybrid servo Drive system LAAK Work table vacuum plate Vacuum pump 7.5kw Maximum speed 25,000 mm/min (x y) 10,000 mm/min ( Z ) Working speed 10-15M/MIN Power 380V/50HZ Code G Transport dimensions 3200x2100x1800mm Weight 1600 kg Price 9600 Eur (EXW Jonava, Lithuania)
Weibert FR3 Sliding table saw milling machine NEW MACHINE Motor: 400V 4kW 2 motors Format sliding table: 2300mm Cutting height: 103mm Swivel saw blade, max. 315mm Milling machine rigid 90° Milling machine 1500/3500/6000/8000 rpm complete with boom WJ-400100
Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg
three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -DH250x3-III -TGL 30-2332 -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 140 mm -Bolt circle: Ø 172 mm -Through hole: Ø 80 mm -Weight: 28 kg
Builder: WILLIBALD Model: MINISHARK MS 3000 Engine: PERKINS 130 kW (180 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2017 Operative Hours: 3.900 h Hourly Production: 40 m³/h Shredding System: 18 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 9.000 kg Price: ON REQUEST!
- Capacity: 10 – 17 to/h - Height-adjustable feet: 500 – 1050 mm - Very little use of the machine - In very good condition
Resistor module, switchgear, switching components -Manufacturer: Wieland, resistance module -Type: ME3696S -Number: 2x module available -Dimensions: 95/50/H75 mm -Weight: 0.15 kg
Reflection light barrier, reflection light scanner, light barrier, light scanner -Manufacturer: Sick, retro-reflective sensor type WT45-P660 -Connector: DC 10-60V -Number: 2x sensors available -Price per piece -Total dimensions: 105/60/H180 mm / 170/90/H110 mm -Weight: 0.7/0.8 kg/pc.
Tailstock, counter bearing for dividing head, dividing head -Height: adjustable -Recording: Top -Dimensions: 245/280/H200 mm -Weight: 28 kg
Cream Separator 8500 l/h to 10,000 litres per hour Make : Westfalia Model : MSE 85 -01-177 Y.o.m : 2008 Condition : Very Good Tools, Control panel, Manual Book , Base Plate Contact us to arrange a visit at our facilities in Derby
Tapping machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1/2 , 3/4, 1 , 1 1/4, 1 1/2 -Dimensions: 510/360 / H240 mm -Weight: 64 kg
Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1/4 - 2 -Dimensions: 510/360/H240 mm -Weight: 64 kg
Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg
Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg
cross-section width:: Schläuche max. 11 mm cross-section heigth:: 11 mm feed:: 0,5 - 100.000 mm Condition: used, very good condition Specification: universal cutting machine with roller drive for hoses - small cutting machine for hoses - feed unit: roller drive - microcontroller control: 80537 - cutting unit: pneumatic - Type of cut: Blade cut - Industrial blade: for PVC hoses - Max. hose diameter: 11 mm - Maintenance unit: yes - Max. feed speed: 1 - 50 m/min - Cutting capacity max.: 450 cuts/min depending on the cutting length - Cutting force approx.: 500 N at 6 bar - Cutting length: 0.5 - 100,000 mm - Resolution/step change: 0.5 mm - Operating voltage: 230V, 50-60 Hz - Compressed air: 5 - 6 bar - Air consumption per stroke approx.: 0.2 l/stroke at 6 bar - Paint finish: RAL 7035 light grey - No docum ...
Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm -Piston: Ø approx. 40 mm -Piston rod: Ø 20 mm -Connection piston rod: M16x1.5 -Dimensions: 55/H260 mm -Weight: 1.45 kg
Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price
Immediately available used centrifugal lubricating oil fitter
Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg
CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...
weight max. in kg: 1600 kg fork length: 1150 mm stroke height: 5500 mm high: 2385 mm weight of the machine ca.: 1,2 t dimensions: 1,72 x 0,8 x 2,4 m Pallet truck with - Triplex mast - Lithium-ion battery - quick lifting and lowering - low overall height The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts ...
Wartsila 8R32 Crankshaft Standard sized Measurement reports available Without cracks or weldings
Key data: 3645
Wartsila 9R32LN generator 1 unit available Year:2005 60 Hz 3645 Kw at 720 RPM
Pneumatic cylinders, air cylinders, standard cylinders -Manufacturer: Westinghouse -Type: 521 295 180 0 -Piston rod: Ø 22 mm -Piston: Ø 80 mm -Stroke: 100 mm -Pressure: max. 10 bar -Quantity: 1 available -Weight: 7.2 kg
Inv. Num. : 7260 Type: WHN 13.4 A Producer: TOS Created: 1986, GO 2003 Parameters: Control system: MEFI CNC 859 Work table length: 1800 mm Work table width: 1600 mm Maximum table load (uniform): 12 t Maximum spindle speed: 1098 1/min X-axis travel: 3000 mm Y-axis travel: 2000 mm Z-axis travel: 800 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Cone: ISO 50 Machine height: 3900 mm Machine length: 6200 mm Machine width: 5930 mm Machine weight: 32 t
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 66 rpm -Power: 3.0 kW -Construction: B3 -Diameter shaft: Ø 50 mm -Protection class: IP 33 -Foot damaged, see picture -Dimensions: 910/294/H350 mm -Weight: 115 kg
turning diameter over bed: 300 mm turning diameter over slide rest: 150 mm turning length: 800 mm spindle bore: 36 mm turning speed range: 42 - 2000 U/min feeds: 0,011 - 0,91 mm/U tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,75 t dimensions of the machine ca.: 1,7 x 0,8 x 2,0 m Machine had been active in the school centre very little used! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1360 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 3x available -Dimensions: 235/142/H180 mm -Weight: 4 kg
SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons
W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools
Three-phase motor, electric motor -Power: 0.12 kW -Speed: 2750 rpm -Shaft: Ø 10 mm -Construction: B14 -Flange: Ø 80 mm -Price: per piece -Number: 1x available -Dimensions: 235/142/H180 mm -Weight: 4 kg
heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 25 to 75 mm -Load capacity: 2500 kg -Number: 1x terminals available -Price: per piece -Weight: 21 kg
Three-phase motor, electric motor -Power: 0.09 kW -Speed: 1330 rpm -Shaft: Ø 9 mm -Design: B3 -Protection class: IP 44 -Dimensions: 190/147/H110 mm -Weight: 4 kg
Electric motor, three-phase motor -Power: 0.76 kW -Speed: 3000 rpm -Shaft diameter: 14 mm -Construction: B5 -Protection class: - -Dimensions: 285/195/H215 mm -Weight: 10 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 20 mm -Load capacity: 1000 kg -Number: 1x terminal available -Price: per piece -Weight: 6 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 2500 kg -Weight: 12 kg
Tip distance approx. 400 mm Tip height above bed 130 mm 12 speeds from 125 – 2800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
Tip distance approx. 500 mm Tip height above bed 125 mm 16 speeds from 120 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 450 kg
Tip distance approx. 500 mm Tip height above bed 125 mm 8 speeds from 220 – 1800 rpm Space requirements, length x width 1.2 x 0.6 m Weight estimated approx. 400 kg
pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm
Moulder Weinig PFA 14/7 Specifications: Working width (mm) 140 Waves: 7 1. Shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5. Shaft: up 6. Shaft: down 7th Wave: Uni Wave
Gear motor, electric motor, three-phase motor -Speed: 84 rpm -Power: 0.18 kW -Construction: B3 -Diameter shaft: 25 mm -Protection class: IP 33/E -Dimensions: 350/170/H180 mm -Weight: 16.2 kg
Gear motor, electric motor, electric gear motor -Speed: 20 rpm -Power: 0.18 kW -Construction: B3 angle -Diameter shaft: 16 mm -Protection class: IP 33 -Dimensions: 235/185/H120 mm -Weight: 4.9 kg
Joint cutter, diesel joint cutter, asphalt cutter -Saw blades: 2 -Saw blade diameter: 500 mm -Cutting depth: approx. 180 mm -Working width: 425 mm -Hatz diesel engine: 25 kW -E-Start -infinitely variable feed
Hand Feeding Covering Material, Hand Feeding Hard Spine Insert, Automatic Cardboard Feeding, Automatic Soft Spine Insert Feeding From Roll, Hot Glue, Format: Max. 530x400mm, Min. 110x155mm, Speed: Max. 15 Cycles/Min.
maximum number of results exceeded
please refine your search
