w h used for sale

Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC control HMC 400 CNC X-axis travel 400 mm Y-axis travel 250 mm Z-axis travel 580 mm C-axis (table rotation) ± 200° Max. grinding wheel diameter Ø 200 mm Spindle speed (grinding) 3000 / 6000 rpm If you have any questions about the machine, please do not hesitate to contact us by phone or e-mail. Feel free to check out our other listings for a full overview of our stock.

Qty. 1 Second-hand steel strip production plant The plant consist of below lines: 20-High Sendzimir Mill Mfc.: Waterbury Farrel Built: 1960 Strip width: 330 – 660 mm Thickness Entry: 4.0 mm Exit: 0.076 mm 2-High Temper Pass Mill Mfc.: United Eng. & Foundry Co. Built: 1960 Strip width: 400 – 630 mm Thickness Entry: 1.6 mm Exit: 0.25 mm Tension Leveller Mfc.: TBA Built: 1982 Strip width: 500-1067 mm Thickness: 0.08-0.3 mm Tensile strength: 30-75 kg/mm² Bright Annealing Furnace Mfc.: Salem & Herr Equipment Built: 1960 Strip width: 150 – 610 mm Thickness: 0.254 – 2.7 mm

Grinding lenght 6000 mm Grinding diameter 1050 mm

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

Flat and satchel bag machine Matador 20, Windmoeller & Hoelscher, Tube width 9-20 cm, Tube length 10-32 cm, machine ready for test production

Key data: 1120 mm, 345 mm, 400 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 1/min Travel X/Y/Z 1120/345/400 mm Feed range X/Y 16 - 800 mm/min, Z 5 - 250 mm/min Rapid traverse Milling head swivel range +/- 45°, quill stroke 90 mm Connected load approx. 14 kW Incl. coolant device Electric tensioner, bracket cover

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 1825 mm table width: 660 mm stroke height: 750 mm : 20 mm weight max. in kg: 450 kg weight of the machine ca.: 130 Kg : 2,2 x 0,85n x 0,24 m With the lifting table, medium-sized motorcycles, mopeds and scooters can be easily brought to a comfortable working height. The table is equipped with two hydraulic foot pedals. One for pumping up, one for lowering. Device for attaching the front wheel. Incl. access ramp. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length: 1750 mm Working width: 1000 mm Working height: verstellbar mm used Haberkorn return conveyor device after four-sided planer -------------------------------------------------- ----- Pos.1 Longitudinal-transverse longitudinal conveyor - Total length 1,750 mm - Depth outside 1,400 mm, inside 1,000 mm - height-adjustable support frames - continuously driven roller conveyor - Transfer to the cross conveyor by raising and lowering the roller conveyor - Cross conveyor with 5 traverses, continuously variable drive - Transfer as a lifting and lowering device to a driven roller conveyor, stepless - Including control cabinet Pos.2 driven roller conveyor for return to the operator - height-adjustable support frames - Length 1,400 mm - Roll width 150 mm (Technical information provided by the manufacturer is not guaranteed!) The data for this ad was created with ModulMWS - the softwa ...

Emergency exit sign, escape route light, emergency and escape route lighting, emergency lights, escape routes, emergency lighting -Dimensions: 380/190/H90 mm -Connection: 230 V -Number: 11 lights available -Price: per piece -Weight: 1.9 kg/piece

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 295 mm -Length: 496 mm -Height: 95 mm -Plate thickness: 30 mm -with: support ribs -Weight: 30 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Surface: very good -Width: 500 mm -Length: 800 mm -Height: 180 mm -Plate thickness: 25 mm -with: support ribs -Weight: 90 kg

Walter Helitronic CNC Tool Grinding Machine - Grinding machine Hersteller [manufacturer]: Walter Type [ type]: Helitronic Control unit: Heidenhain TNC 360C Incl. handwheel Baujahr[construction year]: 10/2002 Travel path: X= 1500mm Y=500mm Z=450mm Workbench: L = 1800mm W=500mm Spindle [spindle]: swivel +-90° Feed speed [feed speed]: 10-4000mm/min Spindle rotation speed: 30-3000 rpm Feed force [feed force]: 10,000-15000N Tool holder: SK 50 after DIN2080 Weight: 7.000kg Approx. (W x D x H): 3.0m x 2.25m x 2.85m Incl. various accessories according to photos Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Tel. +4917621834834 Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - u ...

HDPE Film Washer Year of construction 2016 0 operating hours (never went into operation) Manufacturer: NEUE HERBOLD, D-74889 Sinsheim composed of: Wet granulator type SM 450/600-S5-2 Friction washer / friction separator type FW 560/3000 Transport screw Separation tank (float-sink separation) type TB 500 mechanical dryer type TM 1005 Extraction system type MFT 55/500 Fine Material Separator Type HS 500 E-circuit

Z Blade Stainless Steel Mix Extruder Manufacturer: Winkworth Model: 14Z HMX Working capacity 22-25 litre Approx total volume of trough litres: 32 litre with Hasco Hydraulics Ltd power pack With Panel YOM Jan 89

Z Blade Mix Extruder Manufacturer Winkworth Model 31Z HMX Mild Steel Total volume 360 litre Working capacity 250 litre Internal dims: 740mm long x 790mm wide x 714mm deep Screw 220mm With oil jacketed trough Lagged and with 3x electric drives

Web width 850mm Print repeat range 250-520 Reel diameter on rewinder and unwinder 600mm Core diameter 76mm Maximum mechanical speed 200m/min Electric drying Alcohol/Solvent ink system BST super Handy Scan digital 4000 web preview Electric ink pumps 10 pcs. Doctor blade chambers 10 pcs. Drip sills 10 pcs. Printing sleeves 176 pcs. Gear wheels 184 pcs. Anilox rollers 35 pcs.

Wood chipping machine Low-noise low-speed machine with press drawer WL12/30 Hopper dimensions 1200x1200 Diameter of shaft 368mm 58 cutting blades in two rows 15/20mm Strainer Main motor 30kW Weight approx. 3200kg

Product number: 2923 Type: Horizontal / Vertical Serial number: 61937 / 61938 Year of construction: 2001 Diameter: 250 mm Pitch: 190 mm Infeed height; 1000 mm Outfeed height: 2150 mm Power: 3 x 400V, 50Hz, 15kW Dimensions: 3800 x 1200 x 3200 mm Screw conveyor with turnable outfeed shute

Key data: 400 mm

Description Lead and Pull Spindle Lathe Weisser Heilbronn Details Built in 1969 Height 1,700 mm Width 1,500 mm Length 3,100 mm Bed width 500 mm Bed height 850 mm Bed length 2,000 mm Face plate Ø 600 mm Food possible by arrangement max. workpiece lengths 1,300 mm Turning diameter over bed 800 mm Turning diameter over support 560 mm Center height 400 mm Spindle speed 1,120 rpm. Multifix holder size C with 5 pockets

Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Year: 2012 - technically efficient, ready to work - after full service - processing of 2 profiles - wing/frame

table diameter: - mm table load: - t table height: - mm Control: - total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m CNC Swivel Rotary Table/ CNC Dividing Apparatus incl. Tailstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 400 mm table load: 0,2 t table height: hor. 200 / vert. Sph. 310 mm total power requirement: 0 kW weight of the machine ca.: 0,155 t dimensions of the machine ca.: 0,60,530,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: ? mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: 400330300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Weinig H30N four-sided planer Working width 300mm Working height 200mm Number of spindles 5 Spindle system: Bottom 11kw Right 11kw Left 11kw spindle angle adjustable up to 90° Right 7.5kw spindle angle adjustable up to 45° Top 11kw Feed speed adjustable via variator up to 22m/min 9kw Feed Motor Drive in the work table: – 3 rows of grooved pulling rollers in front of the first head – 5 rows of smooth pulling rollers Top drive: – 9 rows of pulling rollers Machine weight 6100kg Machine dimensions 470x190x160cmH

COMPONENTS OF THE SYSTEM Preheating oven Powder coating booth Fluidized Bed Powder Coating Lifting system Automatic Transport System – Conveyor Belt C-80 Electrical control and installation Transport and assembly Fluidized Bed Powder Coating Booth The powder is fluidized in the fluidized bed vessel when the part is preheated and positioned over the fluidized bed container. The lifting system lifts the fluidized bed tank and the part is coated. After the coating process is completed, the fluidized bed is lowered again and an air blowing system blows off the excess powder on the part. The process can be carried out fully automatically. The cab's system is designed for powder coating with powder recovery and consists of a powder chamber for powder application, a monocyclone and a post-filter for extracting powder residues Chamber dimensions Length: 2000 mm Width 1 ...

5 colors flexo central cylinder machine + 1 rotogravure printing machine. Year 1982 but overtaken 1999 Material foil = 20 my – 150 my, paper up to 120 g/m2 Max web width = 1135 mm, Repeat = 300 -800 mm, Diameter unwinder = 1000 mm, (sleeve 76 mm) turnstile. Diameter rewinder = 1000 mm, (sleeve 76 mm) turnstile. Speed 200m/min Tooth pitch 5mm, Accessories: Orbit Observation Track Control = Futec, Oil cylinder system, Printing cylinder = 67 thou x 127 – 112 thou x 22, Air expansion shafts = 7, 7 pneumatic pumps 

Number of spindles: 6 St. Working width: 230 mm Working height: 160 mm Length of the planing table: 1050 mm Feed motor: 7 kW Feed speed: 6-40 m/min. Weinig Powermat 1200 ---------------------------------------------------------------------- - with infeed automation Weinig wheel magazine EM 100 and linked with outfeed automation Weinig High-Mech A 1 The machine will be completely checked in our warehouse before delivery! Detailed description: ---------------------------------------------------------------------- - 1. Weinig planer and moulder Powermat 1200 ---------------------------------------------------------------------- - Technical data: ------------------------ Working width 20 - 230 mm (with tool flight circle 93 - 163 mm) Working height 10 - 160 mm (with tool flight circle 93 - 163 mm) 1. Spindle ----------------------------- First lower horizontal spindle Motor with brake 7.5 KW ...

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder type 240400080XP -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 12 mm -Number: 2x cylinder available -Price per piece -Dimensions: 133/56/H86 mm -Weight: 0.8 kg/pcs

- Tool measuring probe RENISHAW TS-23R - Rapid Traverse (X x Y x Z): 36 / 36 / 36 mm/min - Spindle taper: BBT40 - Travel (X x Y x Z): 1.000 x 560 x 600 mm - Number of tool stations: 30 (automatic) - Control: HW F i Series - Max. spindle speed: 12

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Metal Work, compact cylinder tray sealing machine Inauen VC999/ TS 1200 N -Type: 121AA20160ZP -Stroke: 160mm -Piston: Ø 120 mm -Piston rod: Ø 32 mm / M27 x 2 -Dimensions: 445/135/H135 mm -Weight: 9.6kg

Used machine in good condition. Available for immediate delivery. - Spindle taper: BBT40 - Max. tool length: 300 - Number of tool stations: 30 - Spindle power : 18.5/11 kW - Rapid Traverse (X x Y x Z): 36 x 36 x 36 mm/min - Travel (X x Y x Z): 900 x 460 x 520 mm - Control: FANUC - Max. workpiece weight: 600 kg - Max. spindle speed: 12.000 rpm - Max. tool diameter: 80 mm - Chip extractor: YES - Internal cooling: YES - High pressure pump: 20 Bar - Axes: 3 - Dimensions (long x wide x high): 2.805 x 2.180 x 3.026 mm - Weight: 5.500

Key data: 1120 mm, 345 mm, 550 mm

Table width 400 mm, table length 1600 mm Tool holder SK 50 Speed range 28-1400 rpm Feed range 16-800 mm/min Travel x 1120 mm ; y 345 mm; z 550 mm Connected load approx. 14.5 kW Accessories: 2 counter bearings Electric clamp horizontal and vertical spindle Vertical milling head SK50 with snap bearing

Reamer, twist drill, drill bit -Manufacturer: Werkö, twist drill Ø 66.0 mm -Recording: MK5 -Type: Two-cutter 66.0 x 630 HSS -on request: different sizes/quantities available from additional stock -Transport dimensions: Ø 66 x 780 mm -Weight: 10.6 kg

shell end mills, indexable insert mills, porcupine mills, milling tools -Manufacturer: Widax-Heinlein, shell end mills, indexable insert milling cutters SK50 -Type: M30 229.34.800 7 04 09 -Diameter: 61 mm, without inserts -Dimensions: Ø 97 x 235 mm -Weight: 3.8 kg

ZIM Hülsta Cabinet Press NOW Easy Make: ZIM Hülsta-Werke Type: NOW Easy Ser.-No.: 380125028 Body max. 260 x 1100 mm 2 supports at the bottom, sliding 2 press beams at the top, movable Beckoff Control Panel Roller track 4500 x 600 mm Roll width: 500 mm Overall dimensions: W x D x H 3300 x 1800 x 3600 mm More items - new and used - can be found in our shop! International shipping costs on request!

ZIM Hülsta Rear Wall Saw Make: ZIM Hülsta-Werke Description: Backwall saw Year of Make: 2014 Serial Number: 380114008 Description: 2 movable Benz saw/drill units Feed roller table Protective enclosure with Leutze laser barrier system Switchboard Extraction piping Control terminal, consisting of: PC, flat screen EIZO FlexScan S1911 Keyboard and mouse, handheld scanner, terminal cabinet Mobile steel skip (beige) More items - new and used - can be found in our shop! International shipping costs on request!

pressure: 630 t passage width: 1390 mm stroke: 400 mm table surface area: 1390x1250 mm total power requirement: 75 kW weight of the machine ca.: 36 t dimensions of the machine ca.: BxTxH 3200x2800x4000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Geared motor, electric motor, three-phase motor -Speed: 50 rpm -Power: 0.12 kW -Design: B3 -Shaft diameter: Ø 16 mm -Protection class: IP 54 -Weight: 6 kg

Producer : Windmöller & Hölscher Type : QMS 8510 dismantled and stored Colours : 4 colors, CI With doctor blades Print width : 800 mm Repeats : from 23 – 80 cm There are approx. 300 air sleeves with the machine - size unknown Speed : 150 metres/minute Un-/rewinder : max. 1.000 mm With length slitting Cliché is 2.84 mm thick Find more here - /

Wine filter housing consisting of: AISI 316 wine pre-filter with 1 filter element 750 mm bayonet connection cod 7 with venting pressure gauge Wine filtration AISI 316 with 1 filter element of 750 mm bayonet connection cod 7 with vent pressure gauge Final wine filtration AISI 316 with 1 filter element 750 mm bayonet connection cod 7 with vent pressure gauge Wine line by-pass, complete with butterfly shut-off valves no. 2 autodosing devices for detergent dosing Find more here - / Contact us at -

WINE BOTTLING LINE 4.000 BOTTLES/HOUR - 28-station rinser - 28-valve filler - Corking machine with 6 heads - Bottle: Glass - Speed: 4.000 bottles/hour of 0,75l Find more here - / Contact us at -

Machine Details: - Type: REH 500 eco - Year of Manufacture: 2017 - Quantity: 4 units - Power Output: 500 kW - Fuel: Fermentation residues (Gärreste) - Maximum Operating Pressure: 2.5 bar - Maximum Operating Temperature: 105°C - Water Capacity: 3200 liters - Electrical Connection: 400V, 63A - Application: Combustion of fermentation residues; other fuels may be possible - Accessories: Chimney, ash discharge, dust silo, and filter Brief Description: Rotary kilns designed for the combustion of dried fermentation residues. Find more here - / Contact us at -

Machining center Type: Optimat BHX 055 Manufacturer: Homag Weeke Year: 2015 Machine in good condition, under power Find more here - / Contact us at -

FZWD 160x1600/1 Sabo Basis 160 Facing & Centering Machine WMW HECKERT Workpiece dia 20-160 mm Length 130-1600 mm Max. Diameter of Milling Cutter 200 mm Facing Spindle's Speeds 112-280 rpm Spindle's Speeds 560-1400 rpm Adjustable feed rate range 15 – 800 mm / min. Spindle ISO 50 Rapid traverse 6000 mm Max. stroke 230 mm Max. Depth of 6 mm Tool holder 4 - 20 mm Max. Feed path 60 mm Total connected load 20 kW Weight 4.5 t

Manufacturer: Werkzeugeinstellgerät, Type: für Hobelköüfe, Year: Eispannlänge 450 mm, FREETEXT1: 40 mm Wellendurchmesse, Year :Eispannlänge 450 mm