133,683 used machines on RESALE, but how to find them? Machine Search
Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for mois ...
table length: 2400 mm table width: 1200 mm table height: mm : 4000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: 0.95 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric Hammelmann HDP 127 high-pressure system on trailer – 1,000 bar / 48 l/min – 110 kW For sale is a high-performance electric Hammelmann high-pressure system of the type HDP 127. The system is mounted on a braked trailer and equipped with a soundproof hood. Technical data: Manufacturer: Hammelmann Pump type: HDP 127 Year of manufacture of high-pressure pump: 2012 Trailer year: 2012 Operating hours: 3,693 h Maximum working pressure: 1,000 bar Flow rate: 48 l/min Built-in electric motor: 110 kW Power supply: 400 V / 50 Hz Engine speed: 1,500 rpm Pump speed: 440 rpm Plunger diameter: 30 mm Maximum water temperature: 40 °C Permissible total weight: 3,500 kg Tyres: 195/70 R15 103 K Ball Coupling Braked trailer Soundproofing enclosure The system is suitable for demanding industrial cleaning work, surface treatment and other professional high-pressure a ...
Welding Fume Extraction, Soldering Suction, Laboratory SuctionHigh Vacuum Torch Extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 DSerien. No. 2902619 year of construction 2004Device air volume flow max. 250 m3/hMinimum air volume flow min. 100 m3/hSeparation efficiency 99.97 %Welding fumes class W3Motor power approx. 0.75 kWNet connection 230 volts, 50 Hz- extraction power infinitely adjustable- 2 pieces extraction connections 45 mm- mechanical air filter (used)- mobile base with 4 fixed castors,
Materials: PP // Film Width (Max): 1600 mm
Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.
General SKU397X1124 MakeElektro-Wärme Aachen TypeHS VRTK 120 No.5714.02-07 Year of construction2007 LocationBarneveld Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature0 — 200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heating(2,1 kW) Number of doors:1 MaterialHalar coating General Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra SpecificationsHalar-coated interiorwithout vacuum pumpConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additive ...
General SKU397X1125 MakeElektro-Wärme Aachen LocationBarneveld TypeHS VRTK 120 Pressure Vacuum possiblecheck Main Features MaterialStainless steel/Halar Volume120 Ltr. Max.temp.200 °C Specified Features - Drying oven Vacuum drying ovencheck Max. temperature200 °C Capacity120 Ltr. Internal diameter500 mm Internal depth620 mm Electric heating(2,1 kW) Number of doors:1 MaterialHalar coating General No.559602 Year of construction2000 Floorspace0,82 x 0,77 m Total height0,67 m Weight200 kg Extra SpecificationsHalar-coated interiorwithout vacuum pumpConsumer wastePaints & coatingsDrying ovensPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarDair ...
General SKU202X012 MakeHermann Waldner TypeHw-17.2H No.4327 Machine number4327 Year of construction2010 Main Features MaterialStainless steel Volume2300 Ltr. Max.temp.80 °C Surface14.4 m2 Specified Features - Drying oven Drying ovencheck Max. temperature80°C Number of compartments:1 Capacity2300l Internal width970 mm Internal depth1000 mm Internal height1750 mm Steam heatingcheck Number of doors:1 With fancheck With rack mounted on wheelscheck With trays32pieces, 530x800x50 mm With jacketcheck Drying ovens Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface14.4m² Drying chamber sizes970x1000x1750 mm With jacket:plates: Max. temperature-10/+140°C Distance between the trays35 mm Tray capacity21Ltr. Container sizes530x800x50 mm With 1 doorcheck Specified Features - Drying oven MaterialStainless steel 1.4404 (316 ...
This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine.
HS Heiber + Schroeder WP 11 D - window patching year 1991 in production good condition
Dough divider/weigher 1 chamber machine Weight ranges: approx. 100 - 1,100 g/piece with digital control with lubrication with extended hopper for approx. 200kg dough
Manufacturer: Hongtai, Type: 2 Walzen Schleifmaschine, Year: 2017, Control: Weinwiev, Monting of the machine: Walze/Walze/Bürste, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 2, Sanding belt dimensions: 2620 X 1350, Shore roller 1: ca.40, Shore roller 2: ca.60, Band 1 Leistung kW : ca.15, Band 1 Schleifbandgeschwindigkeit m/s : regelbar, Band 2 Leistung kW : ca.15, Band 2 Schleifbandgeschwindigkeit m/s : regelbar, Frequency control of belts: 2, Continous adjustable feeding speed m/min: 10-20, Vacuum table: yes, Diameter/ brush bristles: ca.200, Weight in kg: 5000, Year :2017
A complete Stürtz window production line is available. 1) Stürtz STBAZ-IPT-4000-V bar processing system for frames, sashes and mullions, year of manufacture: 2004. 2) Stürtz SE HSM-25/26-Compact-Plus four-head welding machine for sashes, year of manufacture: 2006. 3) Stürtz 4MC Motion Control CNC cleaning machine for the sash line, year of manufacture: 2011. 4) Stürtz WST-25-CNC turning station at the sash cleaner (3), year of manufacture: 2011. 5) Stürtz SE-HSM-40/26-Compact-Plus horizontal four-head welding machine for frames, year of manufacture: 2006. 6) Stürtz 2MC Motion Control CNC cleaning machine in the frame line, year of manufacture: 2008. 7) Stürtz WST-30 turning station in the frame line, year of manufacture: 2008. 8) Stürtz SE-BHT-3000 brush lifting table as a stop and transport table before the sash stop, year of manufacture: 2008. 9) Stürtz FBS-1 sash hardware sc ...
Overview This HORMES crate washer was manufactured in 1992 and was previously installed in a returnable bottle filling line. The machine is designed for the cleaning of beverage crates before they are reused in the filling process. Crate washers are typically positioned upstream of the unpacker in returnable glass bottling lines to ensure that empty crates are properly cleaned before being refilled and returned to circulation. Machines from Hormes are known for their robust construction and long operational lifetime in beverage production environments. The machine is suitable for integration into returnable bottle lines and represents a functional solution for crate cleaning in beverage production systems. Technical Data Manufacturer: Hormes Machine type: Crate washer Year of manufacture: 1992 Application: Cleaning of beverage crates in returnable bottle lines Typical installation positi ...
Top opportunity for professionals! 🔥 Available now: a comprehensive Hünnebeck Manto formwork package with approx. 210 m² of wall formwork , including matching accessories †ideal for efficient wall forming on site. The package includes a wide mix of Manto panels (various sizes) as well as essential accessories such as alignment clamps, corner clamps, wedge clamps, push-pull props and transport hooks †everything you need for a smooth and fast setup. 💪 👉 Mixed quality, but predominantly 0-star †perfect for cost-conscious contractors focusing on functionality and strong value for money. ✅ All benefits at a glance: Approx. 210 m² Hünnebeck Manto formwork Wide range of panels & accessories Ready for immediate use Ideal for medium to large construction projects Attractive pricing due to mixed ...
Secure available Hünnebeck RASTO wall formwork for professional concrete and construction projects 🚀 This premium package of RASTO corner panels and RASTO formwork panels stands out with its very well-maintained condition, immediate jobsite readiness, and efficient site operations — ideal for companies looking for reliable wall formwork and professional construction material with short-term availability 🔥 The proven Hünnebeck RASTO systems are perfect for fast assembly processes, efficient concrete operations, and flexible formwork cycles. This professional used wall formwork delivers proven quality, strong availability, and an attractive price-performance ratio ⚡ 🔹 Premium used wall formwork in very well-maintained condition 🔹 Package includes RASTO corner panels & RASTO formwork panels 🔹 Ready for imm ...
Description Item #8817 – WAFER PRODUCTION LINE WITH CHOCOLATE ENROBING LINE (wafer stick oven and sheet wafer oven) Manufactured by HAAS/MORCOS Year 2020, Wafer line including : SHANGHAI KUIHONG FOOD MACHINERY FACTORY Wafer Roll/Tube Oven, suitable for both filled or hollow wafer rolls/tubes Also including a Mixing Machine, Pumping & Filling Machine, the Wafer Roll/Tube Oven, Cooling Conveyor, and a Ball Mill. SWA-31G Wafer Sheet Oven, plate sizes 290 x 460mms, 31-plates Wafer Sheet cooler type DEV-1.2 m One Spiral Contact cream spreading machine type STM Turning conveyor type WDB One Wafer book cooling tower type WKF 70 One Cream turbo mixer type TCM125 One Ejection Table for wafer blocks type ET One Wafer book cutter type MWDL Turbo dough mixer type TMN 120 Scraper machine type C40T High performance turbo mill type CS TU50-90 Stainless Steel 90degree Turntable, band width 500mms, foo ...
Description Item #8956 – DOUBLE TWIST WRAPPER FOR CHOCOLATES Manufactured by OTTO HANSEL Model X8002 Currently set up to wrap chocolate balls approx. 28mms diameter With Vibratory Product Feeder 380Volts, 3Phase, 50Hz
Description Item # 9137 - CHOCOLATE NEAPOLITAN WRTAPPER Manufactured by KLOCKNER HANSEL Model Speedy 7216 400Volts, 3Phase, 50Hz Single Stage Wrapper Foil & Label feeds both from reel Set up for a 34 x 34 x 5mms piece With NORDSON 3400V Glue Unit nominal capacity at up to 400 pieces per minute, depending on product, size, type of feeding
Description Item # 9215 - (2) DOUBLE TWIST WRAPPERS Manufactured by OTTO HANSEL set up to wrap chocolate pieces measuring 24mms x 11,5mms 220Volts, 50Hz, 3Phase Each Wrapper also including a Product Aligner/Feeder Model X8003(HBX) Model X8002(HBX)
Description Item # 9282 - WAFER OVEN (was producing waffles) Manufactured by HAAS Model SWAK-32 32-Baking Plates measuring 460 x 280mms Bottom Pattern is 5 x 5mms, depth about 2mms Top Pattern is 5 x 5mms, depth about 1mms Gas Fired, also including Dough Mixer Producing 24 x Round Waffles per plate, each measuring around 50mms diameter Can produce sweet, savoury or sugar free waffles Completely refurbished with new electrical system With a ASG-1 Packaging Machine for the individual waffles Manual Bucket Feeder to Packaging Machine Also with a Screw air Compressor & 500litres Tank
Description Item # 9313 - WAFER STICK OVEN Manufactured by HAAS Model EWB-2/1F Year 1992 3 x 380Volts, 50Hz, Gas Fired Includes a dough mixer Take-up belt and a Cream feeder Was used to produce wafer tubes with & without filling Tubes with dimensions of approximately 10 mm diameter and 140 mm length.
Wehde WM 50 KS – HATZ 1D42z , , The Wehde WM 50 KS combines high capacity with whisper-quiet operation and extremely low fuel consumption. , Ideal for sewage, drainage, wellpoint dewatering, or construction site water, Equipped with a reliable Hatz 1D42Z diesel engine. , Thanks to its low engine speed, this pump can run for up to 7 days on a single 130-liter tank fill., Whisper-quiet: Thanks to the high-quality sound enclosure, the pump produces only approx. 59 dBa under full load, , High Capacity: With a flow rate of approx. 60 m³/h and a very low RPM (only 50 per minute), the pump experiences minimal wear and tear, keeping the cost per operating hour to a minimum. , , Technical specifications:, Type: Double diaphragm pump, Engine: Hatz Diesel (1-D-42-Z), Noise level: 59 dBa, Tank capacity: 130 liters, Extras: Lockable doors, robust frame, galvanized base, , Throughput capacity: 60 m ...
Godwin HL80M high-pressure pump, , This dry self-priming high-pressure diesel engine pump is ready to tackle all the heavy work without complaining. With its robust 75 kW Deutz diesel engine (at 2200 rpm), it delivers impressive performance: a maximum capacity of 95 m³/hour and a delivery head of up to 85 meters. Whether its pressure testing pipes, irrigation, or a rinsing job after a fun weekend in the mud, this HL80M can handle it all., , Key specs:, , Type: HL80M, Drive: Deutz diesel engine, Fuel tank: 250 liters (you can keep pumping for a while before it gets thirsty), Consumption: ± 20 liters/hour at full load, Pressure connection: 4 flange, Suction connection: 4 V-piece quick coupling, Weight: 1,800 kg (solid, because quality weighs something), Dimensions: 2150 x 1130 x 2060 mm, Pump housing: cast iron – extremely strong, Impeller: cast steel – for when things get serious, M ...
Selwood PD75, Self-priming - Quick coupling. MAX capacity: 30m³/h. MAX head: 30mwk. MAX sludge clearance: 6mm. Widely used in construction for smaller jobs. Can also be connected to a drain. A well-functioning, immediately usable machine., , Throughput capacity: 30 m3/h, Max dirt passage: 6 mm, Max. head: 15 MWK, Max dirt passage: 3000 rpm, Weight: 115 kg, , = More information =, , Year of manufacture: 2012, Applicable material: Water, Empty weight: 490 kg, Connector size: 4, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, ...
MIG-MAG Welding Machine EWM WEGA 400 MIG DW EWM HIGHTEC WELDING GmbH. Made in Germany. Welding current 50- 400 A. Welding voltage MIG 16.5 - 34 V. Max. welding current at: 45%ED (40°C) 400 A. Max. welding current at: 100%ED (40°C) 265 A. DV case WEGA DRIVE 4. With intermediate hose package, Welding hose package with MIG-MAG welding torch, Ground cable and wire reel. Without gas bottle. MIG MAG Welding Machine EWM WEGA 400 MiG DW – Shielded Gas Welding Machine - MIG/MAG Welding Machine
MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 2-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck, ...
MIG/MAG/TIG/TIG/Electrode Welding Machine EWM Integral Inverter MIG 500 Pulse Manufacturer: EWM HIGHTEC WELDING GmbH. Made in Germany. Technical data: Welding current 5 - 500 A. Welding voltage MIG 14.7 - 39 V. Welding voltage TIG 10.2V - 30V Welding voltage electrode 20.2V - 40V. Max. welding current at: 60 %ED 500 A. Max. welding current at: 100 %ED 400 A. MIG/MAG pulse – welding, MIG/MAG – standard, (TIG – HF and Liftarc ignition) and rod electrodes - welding possible. 2-stroke welding or 4-stroke welding. Connection option for: handheld remote control, integralC10, C20, C30, C40, superPulsSP10 and SP11, robot interface RINT 1 and 2, vending machine interface, standard. DIN ISO 9000: standard connection of the documentation interface PCINT 1 for welding data documentation for DIN EN ISO 9000ff. Equipment: DV case integral 4x4. With Fetra hand-flatbed truck, ...
used
BBA Handy 4 mechanical water meter DWI (overhead wheel), equipped with M- and V-part 4 system C (interchangeable with gimbal). Ultra lightweight, stackable, and lockable. Weight 16.1 kg, , Mechanical DWI, The DWI water meter operates using an overhead wheel inside the measuring tube. This allows for a large passage of dirt particles in the liquid, but the measuring tube must be filled for an accurate measurement., , Handy water meters, Water metering is a standard part of daily operations for many pump professionals. In some countries, it is even mandatory to measure how much water is pumped from A to B or how much groundwater is extracted from a specific area., , The Handy water meters from BBA Pumps are specially designed for use on mobile pumping systems. The combination of light weight, carrying handles, and ergonomic design makes these water meters ideal for field use. Each portable ...
used
8-color format: 1270 mm<br><br><br><br<br>br>
<br>Machine completely renovated; Pipe length: 56-164 cm Tube width: 35-70 cm Lower width: 7.7 - 22 cm 1 or 2-valve units Gravel-press-Gértel Option: S-compression G'rtel, Icoma<br><br><br>br>Verf Gbar: now
<br>Tube length: 48-140 cm Pipe width: 30-70 cm Lower width 7-16 cm 1 valve Lower Patch Unit 1 or 2 color at the bottom patch Gravel presses Option: S-Presses, Icoma<br><br>Still in operation: Yes<br>Verf Gbar: now
<br>Tube length: 55-132 (165) cm Pipe width: 30-70 (80) cm 4 plies, photocell, 2 rear color printers<br><br><br>Verf Gbar: at once
<br>Flush cut and kicked end tuber with belt ri's system, 4-ply, photo cell, 0/2 or 4 end button color printer, range perforating system<><br<br>Verf Gbar: at once
<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>
used
Central cylinder 8 colors Chambered doctor blade etc.
used
N E U M A S C H I N E! OUR MOST SOLD! Bandsaw HBS 470 400V 3 HP S 1 Cutting height of 290 mm 465 Mm cutting width 475mm solid wheels Precision roller guides 3454mm band length Work plate, swiveling Weight: ca. 180 kg G & HM-HBS470 SPECIAL PRICE NET OF 999.-
Various sub-equipment from a training workshop, to hand over individually, e.g. lid sub-device with upper beam and counter holder, Universal part apparatus with initial division Walter UTA150E with counter holder and rotary chuck 3 partial discs with parts see above, Part apparatus Walter can be swivelled without initial division. Furthermore Luenetten standing and running, on request please Specify the tip height and distance mid prism to mid plan area. Rest according to photo. Other sub-equipment susengar, Direct division Indirect division, various large sum. Please ask Sub-discs for UTA 150 E 22 24 29 36 37 49 57 63 16 30 33 36 39 51 57 63 16 27 30 33 41 47 53 61 Special price
Stock number: U2110-1 Used decanter centrifuge by KHD HUMBOLD WEDAG type S3-2, designed in stainless steel AISI 304. Machine has bowl with internal diameter of scroll 610 mm and is driven by 37 kW electric motor. Maximum rotation speed of bowl 2050 rpm. Unit also is equipped with hydraulic pump and is installed on carbon steel frame. Machine had been designed for work on waste waters. With machine are included spare carbon steel bowl, gearbox and electric motor. Not included control panel and documentation.
SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer
used
7 color<br><br><br>Still in operation: Yes<br>Available: immediately
Flush cut and stepped end tuber with belt snatching system, 4 plies, foto cell, 0/2 or 4 colour tail end printer, area perforating system Available: at once
Tube length: 55 - 132 (165)cm Tube widht: 30 - 70 (80) cm 4 plies, photo cell, 2 colour tail end printer Available: at once
Tube length: 48 - 140 cm Tube width: 30 - 70 cm Bottom width 7 - 16 cm 1 valve Bottom patch unit 1 or 2 colour on bottom patch Shingle pressing Option: S-Pressing, Icoma Still in operation: Yes Available: now
Machine completely reconditioned; Tube length: 56-164 cm Tube width: 35 - 70 cm Bottom width: 7,7 - 22 cm 1 or 2 valve units Shingle pressing belt Option: S-Pressing belt, Icoma Available: now
maximum number of results exceeded
please refine your search
