w h used for sale

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

Key data: 400 mm, 500 mm, 425 mm

GENERAL Project No.: 905673 Quantity: 1 pcs. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W04-22 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 14/14/20 m/s2 Feed force in X/Y/Z 10000/10000/2×5000 N Direct displacement measurement system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear Actuator X/Y/Z Tool holder HSK-A 63 Max. speed milling spindle 17500 1/min Max. power at ED 10-40/100% 35/26 kW Max. torque at ED 10-40/100% 80/60 Nm Spindle diameter in the front bearing 80 mm 2 pcs horizontally arranged milling spindle Spindle spacing 400 mm Pneumatic tool system control Pneumatic tool taper cleaning in milling spindle Torque support for multi-spindle  ...

Horizontal drilling rig, manufacturer: DITCH WITCH, type: AT 40 All Terrain, year of construction: 2018, read operating hours (h): 2,898, serial no.: DWPAT40XHK0000065, with rod box, drill pipe, without drill heads, diagnostic screen with approx. 12 error messages (including AdBlue malfunctions), engine no.: 707 3399, 4-cylinder diesel engine, 119 kW, thrust JT/AT 178 kN, extendable cab with heating and air conditioning, flushing high-pressure pump, electric shock protection system, hydr. Crusher, remote control with remote shutdown function, Commander 7 controller with locating system

Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Walter, face milling cutter head -Type: WA ER 06 Ø315 mm -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

turning diameter over bed: 3050 mm turning diameter over slide rest: 2500 mm turning length: 21200 mm Control: Siemens type: 840D turning speeds: 0,236-60 U/min faceplate: 3000 mm main drive motor: 200 kW tailstock quill diameter: 900 mm roll stand: steady: 1200 mm steady: 1200 mm steady: 750 mm steady: 750 mm with live steady: 2000 mm faceplate: 2000 mm Thickness: 330 mm workpiece weight: 200 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 7700 mm y-travel: 1500 mm Control: Siemens type: Sinumerik 840 C spindle taper ISO: 130 turning speeds: 1490 U/min power capacity: 45 kW chip conveyor: Angle head: Angle head: Plate area: 9000x6000 mm workpiece weight: 100 t One direction thrust bearing: total power requirement: kW dimensions of the machine ca.: m Panel is optional and we charged extra The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 16000 mm y-travel: 3000 mm taper ISO: 50 w-axis: 1200 mm total power requirement: 30 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1070 mm turning diameter over slide rest: 710 mm turning length: 11000 mm Control: Siemens type: 840 D bed width: 710 mm transmission ratio: 2 turning speeds: 3,55-710 U/min diameter of quill: 200 mm quill stroke: 350 mm spindle passage: 128 mm chip conveyor: faceplate: 1000 mm steady: 500 mm steady: 500 mm steady: 500 mm offen steady: 500 mm offen steady: 800 mm offen steady: 800 mm offen roll stand: 2 St main drive motor: 71 kW total power requirement: kW weight of the machine ca.: 27 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane block, crane hook, load hook, single hook, lower block -Load hook: for chain hoist -Load capacity: 3 t -Hook path: 6 m -Dimensions: 500/260/80 mm -Weight: 11.8 kg

Hand press pliers WMW Type: PZ 60.1-U with replaceable press jaws for Al and Cu conductors Dimensions: 640 x 220 x 50 mm

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

Twist drill WMW Ø 52 mm x 415 mm HSS Use: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 55 x 55 mm

Twist drill WMW Ø 54 mm x 415 mm HSS Usage: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill Bit WMW Ø 56 mm x 415 mm HSS Use: N Vapor Coated Overall Length: 415mm Spiral Length: 220mm Morse Taper Shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill WMW / WERKÖ Ø 59 mm x 430 mm HSS Usage: N Vapor Coated Total Length: 430 mm Spiral Length: 240 mm Morse Taper Shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ ) Ø 60 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ) Ø 61 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW Ø 69 mm x 425 mm HSS Overall length: 425 mm spiral length: 230 mm Morse taper shank: MK5 used, tested ! Dimensions: 430 x 70 x 70 mm

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Tuchel connector: 5-pin -Weight: 3.7 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.3 m -Plug: see photos -Transport dimensions: 400/400/H100 mm -Weight: 4.6 kg

Dividing head, spiral milling attachment, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Subhead -Point width: 450 mm -Recording: SK40 - Suitable for: Milling cutter sharpening -Translation: 1:40 -swivel -Weight: 60 kg

Universal milling angle head, milling angle head -Recording: SK 50 -Flange mounting outer diameter: 380 mm -Bolt circle diameter: 320 mm -Drive mounting diameter: 60 mm -swivel -Quick stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft -Mouth size: Ø 200 mm -Weight: 22 kg

Dividing head, dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -with translation -Shaft mounting: Ø 20 mm -Dimensions: 470/230/H240 mm -Weight: 30 kg

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 1/2-3/4 inch -Weight: 6 kg

Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

Hydraulic cylinder, double-acting WMW Hydraulic cylinder for UPW 63 ( UPW63 ) Piston diameter: Ø 140 mm Rod diameter: Ø 56 / 120 mm stroke: 56 mm Shaft diameter: Ø 22 mm Spare part for WMW UPW 63 ! New !' Dimensions: 420 x 184 x 184 mm

Hydraulic cylinder, single-acting, spring return WMW Hydraulic cylinder for UPW 63 Piston diameter: Ø 140 mm Rod diameter: Ø 55 / 80 mm stroke: approx. 17 mm Spare part for WMW UPW 63 ! New ! Dimensions: 294 x 184 x 184 mm

Gluing unit, gluing section, gluing head, heating basin for edgebanders, edgebanding machine -electrically heated -7x heating elements, each 800 watts -revised by FavFE-MA-TECH -2x glue pots available Price: per piece -Dimensions: 190/100/H125 mm -Weight: 3 kg/piece

Housing Unit, Three-Hole Flange Bearing Housing Unit, Flange Bearing INA PCFTRY 35, PCFTR35 2pcs ! housing: CFTR07 insert bearing: GAY 35-NPP-B Shaft diameter: Ø 35 mm Dimensions (single bearing): 145 x 128 x 45 mm New !' Dimensions (Packing): 145 x 130 x 90 mm

Twist drill WMW-WERKÖ HSS 9930 ( HSS9930 ) MK5 65,0 x 800 Ø 65 mm Dimensions: 960 x 65 x 65 mm

Holder for tapping head WMW Z39 Outer diameter: 180 mm Inner diameter: 45 mm Dimensions: 180 x 180 x 125 mm  

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 30 10pcs ! housing: 01CJT08 insert bearing: GYE 30 KLLB-C FA115 shaft diameter: Ø 30 mm Dimensions (single bearing): 142 x 80 x 42 mm New ! Dimensions (Packing): 400 x 150 x 90 mm

Housing Unit, Two-Hole Flange Bearing Housing Unit, Flange Bearing INA PCJT 45 2 pieces ! housing: CJTR09 insert bearing: GLE 45 KRRB FA115 Shaft diameter: Ø 45 mm Dimensions (single bearing): 180 x 110 x 50 mm New ! Dimensions (Packing): 180 x 110 x 100 mm

Hobs, tooth gear cutters for hobbing machine WMW / PWS Type G Module 3 ( Module3 ) HSS / Co TGL 29-8002 Bore Ø 40 mm New !' Dimensions: 110 x 100 x 100 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS type G module 1.5 HSS / Co TGL 29-8002 bore Ø 27 mm New !' Dimensions: 58 x 69 x 69 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type K Module 2,25 1575 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1844 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 69 x 69 x 58 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS type G module 2 0175 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0191 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 2 0510 HSS / Co TGL 29-8002 Bore Ø 32 mm New !' Dimensions: 80 x 80 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1432 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 69 x 69 x 58 mm

hobs, tooth gear hob for hobbing machine WMW / PWS type G module 2 0120 HSS / Co TGL 29-8002 bore Ø 32 mm New !' Dimensions: 78 x 78 x 71 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1646 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear milling machine for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 1042 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm

Hobs, tooth gear hobs for hobbing machine WMW / PWS ( WMW/PWS ) Type G Module 1.5 0062 HSS / Co TGL 29-8002 Bore Ø 27 mm New !' Dimensions: 70 x 70 x 58 mm