w h used for sale

WOMA MK3 high-pressure system – 2,500 bar – DEUTZ Diesel – Year of manufacture 2009 For sale is a used WOMA high-pressure system on trailer chassis, built 2009. Robust industrial high-pressure system from WOMA with DEUTZ 6-cylinder diesel engine, suitable for professional high-pressure cleaning, surface treatment and industrial applications. Technical data high-pressure system: Manufacturer: WOMA Type: MK3-250M-P 18 Year of manufacture: 2009 Operating pressure: 2,500 bar Flow rate: approx. 26 l/min Drive power of the pump: 117 kW Drive speed: 1,800 rpm Design: mobile trailer system Net weight: approx. 2,250 kg Permissible axle load: 2,700 kg On-board voltage: 24 V DC WOMA Order No.: A2009/00279 CE marking Diesel engine: Manufacturer: DEUTZ Type: TCD 2012 L06 2V 6-cylinder diesel engine Power: 127 kW / 170 hp Engi ...

Approx. 170 tool holders, some with tools

Hardness Tester WOLPERT Testor - HT 1E Brinell: 250 kg Rockwell: 150 kg Projection: 125 mm Workpiece height - max.: 200 mm Machine weight approx.: 70 kg Approx. space requirement: 400 x 200 x 700 mm Test load: 62.5 / 100 / 150 / 187.5 / 250 kg. Brinell Dto. 100 and 150

Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible.

Dynajet 1000 me, used, blue Operating pressure: 1000 bar, Flow rate: 17 l/min, Drive: electric 35 kW, 400 volts, 63 A, Operating hours: approx.: 427 h, Trolly, incl. gun, 10 m HD hose, 15° flat spray nozzle,

Dimensions (L/W/H): 2400x1200x410 mm Weight: 1300 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WACO - KUJAKON high speed planing and cutting line, Manufacture year 2003, Feed speed up to 200 m/min, Wood length 1800 - 6200 mm, WACO high speed planer Solid, - 6 spindles B-R-L-T-T-B, - incl. tooling, KUJAKON automation with de-stacking, infeed and stacking, - Outfeed with multiple cross cutting with 4 saws, - Signode pack strapping system

WOMA 325 Z P30 high-pressure system – 1000 bar – replacement engine Scania – ready for use For sale is a WOMA 325 Z P30 high-pressure plunger pump, installed in a MAN vehicle. The system is 100% operational, technically and visually very well maintained. The machine is equipped with a Scania DS11 replacement engine (see nameplate). Robust, proven technology – ideal for demanding industrial cleaning jobs. The replacement engine was inspected and completed by Scania, including a new intercooler. The engine replacement was carried out in February/March 2019 . Technical data: Pump manufacturer: WOMA Type: 325 Z P30 Max. operating pressure: 1,010 bar Flow rate: 134 l/min Speed: 1,800 rpm Plunger Ø: 30 mm Power consumption: approx. 230 kW Drive: Scania Replacement Engine (DS11) Installation: MAN vehicle Operating hours: approx. 13,6 ...

This Hyundai Wia SE2200LMSC Lathe was manufactured in the year 2021 in Korea and has 3316 production hours, of which 538 are spindle hours. It is equipped with a Hyundai Fanuc i Series Smart Plus control unit. The machine has a spindle speed of 3500 rpm.

This HYUNDAI WIA L300 LMC Lathe was made in 2019. It is equipped with a Siemens Sinumerik 828D control unit. The machine has a spindle speed of 3000 rpm.

This 4-axis Hyundai Wia LM 1800TTSY horizontal turning machine was manufactured in 2021. It features a slant bed lathe with main and counter spindle, two turret heads, and Y-axis with driven tools. Equipped with a Fanuc F31i A control, it supports a turning diameter of 230 mm and a length of 673 mm. If you are looking to get high quality turning capabilities consider the Hyundai Wia LM 1800TTSY machine we have for sale. Contact us for more information.

This Hyundai Wia E200C lathe was manufactured in 2012. It features a working diameter of 550 mm, a maximum workpiece length of 300 mm, and a hole through the spindle of 65 mm. With a spindle power of 15/11 kW and a speed of 4000 rpm, the Hyundai Wia E200C machine we have for sale is a robust choice for precision machining. Contact us for further details regarding this lathe.

Universal milling head, milling holder, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: Input gear -Milling head: fully pivotable -Stroke: 72 mm -Transport dimensions: 850/650/H520 mm -Weight: 277 kg

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Manufacturer: Werthenbach, hydraulic cylinder type H21-F-63/86-180AN -Stroke: 180 mm -Piston rod: Ø 36 mm / Thread Ø28 x 25 mm -Cylinder: outer Ø 75 mm -Mounting: Bolt circle Ø 118 mm -Pressure: max. 120 bar -Number: 2 cylinders available -Price: per piece -Dimensions: 370/140/H145 mm -Weight: 11 kg/pc.

Heat exchanger, construction heating, construction dryer, heating, hall heating, hot water exchanger, fan heater, heating, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -pure heat exchanger, only usable in conjunction with a heating unit (e.g. Wacker Neuson HP 252) -Type: HX 60 -Power: 43.5 kW -Quantity: 8 pieces available -Price per piece -Dimensions: 660/720/H1065 mm -Weight: 106 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FH / Frieseke and Hoepfner, hydraulic pump hand pump -Type: WKP 3 -Pressure range: max. 450 bar -Quantity: 2x hand pump available -Price per piece -Dimension: 700/210 // H200 mm -Weight: 13.8 kg/pc.

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M680 239.69.058 Ø160 -Number of teeth: 12, without indexable inserts -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160x 60 mm -Weight: 3.4 kg

cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, corner milling cutter -Manufacturer: Widax-Heinlein, corner milling cutter -Type: M400 Ø200 R10 51111 / M400 239.42.342 Ø200 51104 -Number of teeth: 10, without indexable inserts -Hole diameter: 60 mm / bolt circle diameter 100 x 18 mm -Dimensions: Ø 200x 60 mm -Weight: 8.1 kg

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Max. discharge volume: 4000cm³, net hopper volume: 1500cm³, stainless steel construction, corrosion protected, version with memory storage hoppers, circular multihead weighing system operating according to the partial quantity combination principle. Design features: chassis, frame, modules and product contact parts made of V2A, easy cleaning through enclosed design with load cells and vibratory drives integrated into the housing, electrical components integrated into the scale frame. Equipment: central product distributor with vibratory drive, inclination angle 20°, vibratory feed chutes with quick-release fasteners, dosing hoppers with motor-operated opening flaps, each driven by a separate motor, weighing hoppers with double-flap design and motor-operated opening flaps, each driven by a separate motor, all hoppers without flap return springs, storage hoppers arranged below the weigh ...

Automatic washing machine for Vemag trollies with wash and rinse section, soap dosing and automatic tote bin turner (in and out)., Capacity: 40 trolleys per hour, Heating: direct steam, Compressed air: 6 - 8 Bar, Power: 3 x 400V, 50Hz, 14.5kW, Dimensions: 11800 x 1900 x 2650 mm

Description 9214 - Likwifier jacketed with steam and holding tank Manufactured by WATSON METAL MASTERS INC (USA) Year 2012 A Likwifier is a type of mixer specifically designed to dissolve solids or semi-solids into a liquid, often used in the food industry for tasks like dissolving gums, emulsifiers, and other ingredients in ice cream mixes, sauces, and other food products

A nearly new Wheelabrator overhead monorail shot blasting machine is available. Rail overhang: 2338mm, rail width: 2980mm, working height: 880mm, work chamber height: 1600mm, max. workpiece diameter: 1200mm, max. workpiece weight: 400kg, exhaust air volume flow: 2500m³/h, exhaust air flange adjustment min./max.: -90°/90°, surface roughness range: 0.1µm-12.5µm, connected load: 22kW, component tolerances: ISO 2768-mK, welded construction tolerance: ISO 13920-AE. Machine dimensions X/Y/Z: approx. 4250mm/3250mm/4850mm, weight: approx. 5750kg, shot blasting hours: 58h, operating hours: 190h. Documentation available. An on-site inspection is possible.

Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screw ...

High-pressure pumps Dynajet 500 me , NEW, Operating pressure: 500 bar, Flow rate: 15 l/min, Drive: electric 15 kW, 400 volts, Operating hours: approx: 1, Trolly, incl. accessories,

DYNAJET UHP 220 – Demonstration system Pressure: 2,800 bar / approx. 40,000 PSI Flow rate: 27 l/min Year of Make: 2021 Engine hours: approx. 633 hours High-pressure operating hours: approx. 350 hours Engine: Volvo diesel engine, 160 kW Condition: very good, ready for immediate use Included in delivery: 1 × high-pressure gun with lance, 800 mm 1 × omnidirectional nozzle including nozzle holder 1 × rotary nozzle 1 × high-pressure hose, 20 m, with quick-lock connection 1 × control cable, 30 m

Many thanks for your interest on our second hand machines, please find follow our offer: Complete Waffle production plant, consiting of: manufacturer : Danger Wafer oven Type : WM 52 plates YOM : ca. 1975 - 1980 heating : natural gas or propane waffle sheet : 470x290 mm deep karee different : automatic sheet take off : Cooler and Fully automatic Hebenstreit WZ-EM wafer spread line for two colours manufacturer : Hebenstreit Type : WZ-EM YOM : 1991 output capacity : up to 50 sheet/min. wafer format : 290 x 470 mm bis 350 x 480 mm dimensions : ca. 11000 x 1300 x 1700 mm different : Film- und Kontaktstreichverfahren consisting of: - wafer magazine - First WZ Cream station - cover station - second WZ cream station - stack station - cover station - Pressing device We offer this machine in 'as is' condition, without warranty, ex Ware ...

Machine type TIG inverter welding system gas-cooled DC and AC system Brand Hugong Type Wave 200 D III Supply voltage 1 x 400 Volt = plug 5 / 16 A Adjustment range 5 – 200 amperes Duty cycle 15 % ED at 200 amps 60% ED at 153 amps 100% ED at 118 amps Current adjustment infinitely variable weldable material thickness steel / VA: 5 mm Aluminium: 3 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable compact system version Fuse 16 Ampere Dimensions L x W x H 500 x 240 x 410 mm Weight 20 kg Age 6 months Condition workshop tested as new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece TIG burner SR 26, Flex, 4 mtr. long 1 piece ground cable 1 pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 1 piece instruction ma ...

Te Coop: Endress & Hauser Walter Contacters HTA 423

Te Coop: Endress & Hauser Walter Contacters HTA 380

Spare welding controllers for resistance welding machines also available: MPS 1033 MPS 1036 MPS 15033 MPS 15036 MPS 15043

Spare welding controllers for resistance welding machines MPS 200mono MPS 200monoR1 MPS 200multi MPS 200multiR1

Spare welding controllers for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Waterjet cutting system mobile Manufacturer Schmidt, Krantz & Co GmbH / Woma Maximator WS103 HFA-HD-Aggregat Maximator waterjet cutting system Waterjet cutting with 2,500bar Foerder power 2.3l/min Cutting head handbetaed, manufacturer Woma Weight 1,000KG External hydraulics with max 350 litres of foerder power required, not included!

Replacement welding controllers 19" for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Replacement welding controllers 19" for resistance welding machines MPS 8043/1 MPS 8043 Q

Meurer high speed wrapper type: CM/HEM 60 Grouping and shrinking of beverage packages. Fully automatically grouped, wrapped and shrunk in PE shrink film. the machine worked in the Tetra Pak line on the 1000 ml SQ Prisma format .

Dough pre-portioner W&P for WP BV-700 dough dividing machines - Dough pre-portioner from WP Haton - for WP BV 700 dough dividing machines / dough weighers - with pedestal and ladder - in stainless steel - Year of construction 2014

Replacement welding controls for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1

Bread dough dividing machine, Fabr.Winkler, Type Hydromat

Year of construction 2000 WashStar Equipment Cabinet HD-No. V8.999.162 B Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Welding device, welding robot -Welding device: for plates that are to be welded at an angle -with: travel adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable -without: inert gas welding device

table length: 2000 mm table width: 1000 mm table height: 920 - 1000 mm : 2000 kg height of stroke: max. 1525 mm total connected load: 1,5 kW connected load frequency: 400 V weight of the machine ca.: t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool trolley, workshop trolley, mobile workshop trolley, drawer cabinet, trolley -Manufacturer: Würth, workshop trolley, sturdy tool trolley -12 drawers: lockable, see photos for layout -Dimensions total: 680/460/H1045 mm -Weight: 70 kg

Used Used hot melt wrap Around Loeven: Year: 2016 Condition: As Is Model: A25 STD Year: 2016 Speed max: 1.800 pack/hour Pack formats: 3x2, 4x3, 6x4 Hot melt glue system Leuenberger Divider included Safety protection Machine Layout: 14 meters in length and 2.5 meters in width Code: JN 1 More details: https://bottlingscout.com

table length: 1300 mm table width: 800 mm table height: 920 - 1000 mm : 1000 kg height of stroke: 510 - 1550 mm total connected load: 1,5 kW connected load frequency: 230 V weight of the machine ca.: 0,55 t Welding table on lifting table: Hole diameter: 28mm The table is made of 15mm thick S355 steel The surface is stained and oiled. Tolerance: +/- 1 mm at the top and +/- 1 degree at the sides. Side panels 150 x 10mm Ribbed bottom for reinforcement. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid) | folds: Z or W shape (change of folding tool necessary) | fold face adjustable per side | dimensions of folded tissue: L(70-100)xW(40-100) mm | dimensions of unfolded tissue: L(1 ...

Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm | suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films | suitable for dry nonwovens (airlaid, spunlaid) | folds: max. 10 folds vertically and 4 folds horizontally | size of tissue, unfolded:L(40-220)xW(30-240)mm | Grammage wet wipe: 30-80g/m? | max. roll diameter: nonwoven: 1000mm, film: 350mm | filling range liqui ...

Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators  ...