w h used for sale

collets: 3 - 20mm tool taper: Sk 430 weight: 4,5 kg dimensions: 350 x 250 x 100 mm Collet set 21 pieces Collets for 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 16, 17, 18, 19, 20mm. Recording SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, milling tool -Quantity: 4x recording SK40 -1x Ø: 16 x 19 mm -1x Ø: 16 x 25 mm -1x Ø: 27 x 25 mm -1x: drill chuck - is only sold complete -Weight: 6kg

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

Turning tool holder, tool holder, turning tool, turning tool holder, tool holder -Number: 1x recordings Manufacturer: Komet -partially with internal water cooling -Weight: 12 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 8 m -Weight: 6 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -with burner body -Length: 4 m -Tuchel connector: 5-pin -Water: chilled -Weight: 2.7 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Weissenfels, Lever chain hoist 3 ton -Load capacity: 3 tons -Chain length: 4 m -Quantity: 1 piece -Price: per piece -Transport dimensions: 700/300/H210 mm -Weight: 25 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: Torch type SR-20, water-cooled -Length: 7.8 m -Tuchel connector: 5-pin -Weight: 3.6 kg

Offer 24130 Specifications: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Threading ST 60 M 27 - Drilling spindle holder MK 4 - Quill stroke 150 mm - 12 drilling spindle speeds 102 - 2000 rpm - 3 drill feeds 0.1 - 0.3 mm - min./ max. distance spindle – table 310 / 610 mm - Drilling radius min / max 380 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 2.0 / 2.4 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Tapping device - hydr. Columns + Boom Clamp - Coolant device - T – Vertical grooves on the rear side of the machine

Immediately available used hand pump

Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available

Cylinder head for Wärtsilä Vasa R32 engine, ready to install

Housing, Fuel mixer

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 7 m -Plug: 5 pin -Weight: 4.2 kg

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8m -Tuchel plug: 5 pin -Weight: 2.8 kg

TIG hose package, welding torch, hand welding torch, TIG torch -TIG hose package: torch type 20H, water-cooled -Length: 8m -Tuchel plug: 5 pin -Weight: 2.8 kg

amount: 2 STK weight - pallet system: 11 kg dimensions: 540 x 2000 x 100 mm Hobbing cutter possibly Pfauter P 400 - 2 pcs. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, -Manufacturer: VEB GWB Wiesa, milling chuck SK40 -Type: B 40/40 -Number: 5x milling holder available -Price per piece -Dimensions: Ø90 x 170 mm -Weight: 1.9 kg/pc.

Heat exchanger thermal works 4 pcs. in different Sizes Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.24 m -Weight: 2.5kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water-cooled -Length: 4.0 m -Quantity: 1x hose package available -Weight: 3.2 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 3,2 m -Weight: 2,7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Dinse DIX KCZ 2-303 water cooled -Length: 5,3 m -Weight: 4,0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.2 m -Weight: 3.4 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Weight: 3.7 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3,4 m -Weight: 2,5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.4 m -Connector: 5-pin -Transport dimensions: 500/460/H100 mm -Weight: 3.3 kg

MIG/MAG hose package extension, intermediate hose package -Welding cable: extension / connection cable water-cooled -Length: 4.35 m -Version: Dinse plug, gas hose, control cable -Connector: 4-pin -Transport dimensions: 470/460/H100 mm -Weight: 6.0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.35 m -Connector: 5-pin -Transport dimensions: 500/460/H90 mm -Weight: 3.5 kg

Key data: 500 KW, 600 kVA, 400 V

Waukescha Gas-CHP VGF L36GLD Gas electricity and heat generators from 1998 with unknown operating hours, complete with cooling system, engine, exhaust gas heat exchanger, but without control. 1 available, 738 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Stamford HC I534E1, 600 KVA Manufacturer: Waukescha Model No.: VGF L36GLD Type: Gas engine (natural gas) Serial number: 80668/1 Power [KW]: 500 Year of Make: 1998 Operating hours: unknown Weight [kg]: – Dimensions LxWxH [cm]: 500 x 230 x 240 AC Generator Stamford Stamford HC I534E1 Manufacturer: Stamford Model No.: HC I534E1 Type: AC Synchronous Generator Serial number: C090036/01 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 1997

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.4 m -Connector: 5-pin -Transport dimensions: 600/420/H70 mm -Weight: 3.6 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.45 m -Transport dimensions: 600/460/H80 mm -Weight: 3.9 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.35 m -Plug: missing -Transport dimensions: 500/480/H90 mm -Weight: 4.1 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

MIG/MAG hose assembly, MIG/MAG welding torch, MIG/MAG hose assembly extension, intermediate hose assembly -MIG/MAG hose package: water-cooled extension -Length: 9.65 m -Connector: 24/37-pin / see photos -Dimensions: 670/550/H150 mm -Weight: 14 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/400/H110 mm -Weight: 3.5 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.3 m -Transport dimensions: 500/440/H80 mm -Weight: 3.3 kg

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Year 1990 - Serial-No. 538 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Year 1986 - Serial-No. 469 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Doppelkopfheftmaschine für Broschüren - Twin-headed Stapler for Booklets - Pads Winterling KM17 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Key data: 400 mm, 500 mm, 425 mm

GENERAL Project No.: 905673 Quantity: 1 pcs. Manufacturer: SW (Schwäbische Werkzeugmaschinen) Type: BA W04-22 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers approx.: 2-3 layers DESCRIPTION MILL Travel in X 400 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse speed in X/Y/Z 100/100/100 m/min Max. acceleration in X/Y/Z 14/14/20 m/s2 Feed force in X/Y/Z 10000/10000/2×5000 N Direct displacement measurement system X/Y/Z/A(U)/C1(C2)/W1(W2) Linear Actuator X/Y/Z Tool holder HSK-A 63 Max. speed milling spindle 17500 1/min Max. power at ED 10-40/100% 35/26 kW Max. torque at ED 10-40/100% 80/60 Nm Spindle diameter in the front bearing 80 mm 2 pcs horizontally arranged milling spindle Spindle spacing 400 mm Pneumatic tool system control Pneumatic tool taper cleaning in milling spindle Torque support for multi-spindle  ...

Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Walter, face milling cutter head -Type: WA ER 06 Ø315 mm -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

Crane block, crane hook, load hook, single hook, lower block -Load hook: for chain hoist -Load capacity: 3 t -Hook path: 6 m -Dimensions: 500/260/80 mm -Weight: 11.8 kg

Hand press pliers WMW Type: PZ 60.1-U with replaceable press jaws for Al and Cu conductors Dimensions: 640 x 220 x 50 mm

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8 m -Tuchel connector: 5-pin -Weight: 3.7 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 3.5 m -Transport dimensions: 400/360/H80 mm -Weight: 3.5 kg

MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Length: 4.5 m -Transport dimensions: 420/380/H80 mm -Weight: 4.4 kg

TIG hose assembly, welding torch, hand welding torch, TIG torch -TIG hose package: water-cooled -Length: 8.3 m -Plug: see photos -Transport dimensions: 400/400/H100 mm -Weight: 4.6 kg

Twist drill WMW Ø 52 mm x 415 mm HSS Use: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 55 x 55 mm