w h used for sale

Pall Supradisc Filter - Secondhand, Unused Item: Manufacturer: Pall Corporation Type: SUPRADISC Model: WSFZ161 (038.161.1) Year of Manufacture: 2021 Made in Germany This is a secondhand item that remains completely unused since purchase in 2021. All components are present and correct. (Offered in "As-is" condition) This is a SECOND HAND ITEM and is sold as is For more information and more available stock please visit us at - advancedbrewing.co.uk

pressure: 250 t chamfer lenght: 3550 mm distance between columns: 3000 mm Control: Cybelelc DNC 1200 total power requirement: kW weight of the machine ca.: 18.500 kg dimensions of the machine ca.: 4300x2750x3750 mm Accessories: - 2-hand foot switch - Lasersafe Fisseler - Hydraulic tool clamping at top and bottom - Die shift - Hydraulic crowning - Support arms - Cybelec DNC 1200 control - 1 set of upper and lower tools - Controlled axes y1, y2, x, r, z1, z2, inclined stop - Protective grille The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 32 mm arm length: 950 mm turning speed range: 51 - 1000 U/min turning speeds steps: 12 bore spindles - Morse Taper: MK 4 quill stroke: 160 mm feed range: 0,075 x 0,3 mm/min table surface area: 1200 x 510 mm total power requirement: 2 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,8 x 1,2 x 2,25 m High-speed radial end mill with - Thread cutting attachment - Vertical table 750 x 620 mm - Horizontal table 1200 x 510 mm - Emergency stop device - Documentation Machine-No. 445 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.63 m, Overall length= 0.96 m, Overall width= 1.06 m, Net weight= 329 kg,

Key data: 105 mm, 2500 mm, 1850 mm

CNC Heidenhein TNC 124 table 1750 mm x 2000 mm spindle dia. 105 mm x - 2500 mm, y - 1850 mm, z- 1400 mm, w - 700 mm

Type: KB600LB Serial number: 409.11.1 Year of construction: 2011 Belt width: 700 mm Model: 90 degrees, right hand side Radius: 1200 mm Power: 3 x 400V, 50Hz, 0.2kW Dimensions: 2200 x 1050 x 1100 mm

Whirlpool Vessel, fitted with stainless steel hinged lid. Approx. 2000Litres Tangential inlet with 1.5" RJT male inlet point. Three separate take off points with 1.5" RJT male butterfly valves. Insulated and clad in fully stainless steel. This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk

This 6-axis Warcom LOGICA 1250-60 press brake was manufactured in 2023. Consider the opportunity to buy this Warcom LOGICA 1250-60 press brake. Contact us for more information.

This SELCO WNTR 710 panel saw was manufactured in 2011. Designed for precision and efficiency in panel cutting, it offers robust performance for woodworking professionals. Consider the opportunity to buy this SELCO WNTR 710 panel saw. Contact us for more information.

This 3-axis SELCO WN750 panel saw was manufactured in 2009. It is designed for efficient and precise cutting of panels. Consider the opportunity to buy this SELCO WN750 panel saw. Contact us for more information.

This 3-axis Weeke Optimat BHP Vantage 24M was manufactured in 2011. A robust CNC processing center, it offers precision and efficiency for diverse machining tasks. Consider the opportunity to buy this Weeke Optimat BHP Vantage 24M CNC processing center. Contact us for more information.

x-travel: 1100 mm y-travel: 650 mm z-travel: 600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m CNC control Sinumerik 828D 2-axes dividing head (4th and 5th axis) electronical hand wheel 24-fold automatic tool changer coolant through spindle device chip screw measuring feeler Technische Daten / technical details: Verfahrweg X / X-Travel 1100 mm Verfahrweg Y / Y-Travel 650 mm Verfahrweg Z / Z-Travel 600 mm Tischgröße / table size 1300x600 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 8000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 Eilgang X,Y,Z / rapid feed X,Y,Z 15,15,15 m/min Gewicht der Maschine ca. / weight ca. 7400 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Th ...

A Welter slotting machine for gear and profile machining is available. Stroke: 1250mm, machine dimensions X/Y: 3800mm/5600mm, weight: approx. 12500kg, control: Siemens. The machine was retrofitted in 2011. Documentation available. On-site inspection is possible.

This 3-axis Enshu WE30Ve was manufactured in 2016. A vertical machining centre designed for precision and efficiency, its ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the Enshu WE30Ve machine we have for sale. Contact us for more information about this machine.

This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine.

General SKU251U316 MakePfaudler TypeCH2500 No.64312 Year of construction1998 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2867 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity2867 Ltr. Vessel sizesDia:1200x2800 mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Floorspace1,6x1,6 m Total height3,15 m Weight1385 kgPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barne ...

General SKU251U308 MakePfaudler TypeCH2500 No.64311 Year of construction1998 LocationBarneveld Pressure Working pressure3 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialGlass Volume2867 Ltr. Pressure3 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel (WWG-9115) Notified bodyTÜV Capacity2867 Ltr. Vessel sizesDia: 1200x2800mm Dished topcheck Dished bottomcheck With covercheck ManholeDN500 Top connectionsDN80, DN50 OutletDN100 Max. temperature-20ºC/+150ºC Information Mounted on consolescheck Floorspace1,6x1,6 m Total height3,15 m Weight1385 kgPressure vesselsPfaudler-werkeTanks > Pressure vesselsBrand > Pfaudler-werke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to in ...

General SKU388X981 MakeSeitz-werke TypeDB250/AFW No.1955 Year of construction1971 Mounted on legscheck and wheels Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume250 Ltr. Motor0.55 KW Specified Features - Stainless Steel Reactor MaterialStainless steel 1.4571 (316Ti) Stainless Steel Reactors Reactorcheck Capacity275 l. (250l.) Vessel sizesDia. 800x800 mm Dished bottomcheck ManholeDN700 Top connectionscheck OutletDN30 With jacketcheck volume 46 l. Max. temperature150°C With propellor stirrercheck Motor0,55 kW, 220-242/380-420 volt, 1385 rpm, (Ex) Speed mixing shaft466 rpm Information LocationBarneveld Floorspace0,80x1,00 m Total height2,30 n Weight350 kg Extra SpecificationsWith John Crane thermosyphon vessel, volume 5 l.Stainless Steel ReactorsSeitz - WerkeReactors > Stainles ...

This 3-axis WEMAS VZ 860 APC vertical machining centre was manufactured in 2011. Ideal for precision machining, it features robust construction and reliable performance. Consider the opportunity to buy this WEMAS VZ 860 APC vertical machining centre. Contact us for more information.

General SKU224X117 LocationBarneveld Main Features MaterialStainless steel Motor3 KW Surface1.7 m2 Specified Features - Roll dryer Roll coolercheck Rolls chromium platedcheck Roll surface1,7m² Roll sizesDia. 600x600 mm Cooling mediumcheck (Glycol) Feeding with rollscheck With knife dischargecheck Motor3,0 kW, (380 V, 2700 rpm) With variable speed drivecheck frequency converter Roll speed22 rpm MaterialHard chrome Information MakeEscher Wyss Year of construction2010 Mounted on framecheck With switchgearcheck Floorspace2,80x0,90 m Total height1,50 m Weight2150 kg Extra SpecificationsWith control cabinet, dimensions 0,80x0,30x1,80 m, - with scraper knife, length 600 mm, : - jacketed aplication roll, dimensions 600 mm, 0,75 kW, 240/380-415 volt, 2700 rpm, roll speed 17 rpm, : - product application tray with jacket -pneumatic knife control and wall control, -ins ...

This 3-axis Vision Wide SE-2112 CNC milling machine was manufactured in 2018. Ideal for precision milling, it offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the Vision Wide SE-2112 machine we have for sale. Contact us for more information.

arm length: max 1500 mm taper MK: 5 weight: 4 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference ID: PP-56192 Category: Guillotines Manufacturer: Wohlenberg Model: 155 Year: 2000 Max. size: 155 cm Condition: Good Location: Europe Availability: Immediately

TouchScreen Screen Program Memory Infeed width: up to 37 cm

This 3-axis WALDRICH COBURG 30-15 S 2525 grinding machine was manufactured in 1991. It features a robust structure with dimensions of 11,500 x 6,610 x 5,170 mm and a weight of approximately 45,800 kg. Capable of handling workpieces up to 11,000 kg, it offers a grinding length of 3,500 mm and a grinding width of 1,450 mm. If you are looking to get high quality grinding capabilities consider the WALDRICH COBURG 30-15 S 2525 machine we have for sale. Contact us for more information.

This WEISS Rundschleiftechnik K52 grinding machine was manufactured in 2015. It features a robust MK4 center size, can handle workpieces up to 650cm, and has a center height of 180mm. The grinding wheel diameter is 500mm, and it includes a Marposs measuring device and an Eckelmann Enc 66 control unit. Consider the opportunity to buy this WEISS Rundschleiftechnik K52 grinding machine. Machine was general overhaul in 2023. Contact us for further details regarding this machine.

This 4-axis Willi Göbel GRS-III-2400-SP cylindrical grinding machine was manufactured in 2018. It offers precision and efficiency for your grinding needs. If you are looking to get high-quality grinding capabilities, consider the Willi Göbel GRS-III-2400-SP machine we have for sale. Contact us for more information.

Dimensions (L/W/H): 1230x490x2120 mm Weight: 200 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1720x760x1160 mm Weight: 230 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 800x800x1350 mm weight: 35 kg total power requirement: 0 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 700x1000x1300 mm Weight: 115 kg Total power requirement: 0,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1600x1500x1500 mm Weight: 1400 kg Total power requirement: 12,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 mm

Walther Rotary Table RTN 250 NEGd + Siemens brushless servo motor IFT6044-1AF71-3AG1 (1pc) used, ready for use

WKZ spindle SK40 Used

This TIMESAVERS 41serie 900 WRD N was manufactured in 2006. It features a 900 mm working width and can handle sanding heights up to 60 mm. The table adjusts from 0 to 80 mm, supporting various material sizes. Ideal for consistent deburring applications. Contact us for more information.

General SKU279U510 MakeEscher Wyss LocationBarneveld TypeFTK 135/450 Main Features MaterialMild steel/Stainless steel Motor0.6 KW Surface1.35 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1.35m² Bed sizes3000x450 mm Product inlet450x200 mm Product outletDia: 80 mm Number of sections:3 Air inletDia:380x300 (3x) Air outletDia: 270mm Vibro motor0,6 kW,220/380 volt, 980 rpm (2x) Without motorcheck MaterialMild steel, Stainless steel 1.4301 (304) Information No.2710214 Year of construction1980 Mounted on mild steel framecheck Floorspace3,8x1,03 m Total height2,7 m Weight2000kgFluid bed dryers continuousEscher WyssDryers > Fluid bed dryers continuousBrand > Escher Wyss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide  ...

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

General SKU339W1254 MakePfaudler TypeAE 6300 No.4265055 Year of construction2018 Mounted on legscheck Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume6300 Ltr. Specified Features - Glass-lined Reactor Reactorcheck Capacity8190l (netto 6300l) Vessel sizesDia. 2000x3060 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionscheck OutletDN150 With jacketcheck volume 795 l Max. temperature-25/+200° With propellor stirrercheck 3-blade reteat curve Without motorcheck Glass Reactors MaterialGlass - Enamel (WWG-9115) Information LocationBarneveld Floorspace2,5 x 2,5 m Total height4,5 m Weight7400 kg CEcheck Extra Specificationsthis item is only the body and stirrer. Reglassed reactor body. Glass-lined ReactorsPfaudler-werkeReactors > Glass-lined Rea ...

General SKU335W850 MakeVerwo Wegmann TypeSBL-112-S-FA-6-T No.7056 Year of construction2016 LocationBarneveld Pressure Working pressure6 Bar Main Features MaterialStainless steel Specified Features - Screen filter MaterialHalar coating, Stainless steel 1.4435 (316L) Sieve filtercheck Sieve sizesDia. 200x900 mm InletDN70 OutletDN70 Capacity33 l. Information Floorspace0,25x0,25 m Total height1,25 m Weight50 kg CEcheck Extra SpecificationsFilter size, dia. 160x700 mm, perforation size 20x4 mm :Screen filtersVerwo WegmannFilters > Screen filtersBrand > Verwo Wegmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

turning diameter over bed: 980 mm turning diameter over slide rest: 720 mm turning length: 7000 mm bed width: 620 mm turning speeds: 1,8-355 U/min faceplate diameter: 800 mm : turning dia. in gap: 1000 mm length of gap: 350 mm quill stroke: 900 mm spindle hollow: 80 mm weight: 20 t steady: 600 mm steady: 480 mm steady: 480 mm Distance between the canter 7000mm Faceplate diameter 1400 urning diameter in the offset 2450, length 940 mm Travel over support 1200 Over support with autom. travel The tech. Data are manufacturer or operatorinformation and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your b ...

General SKU222W218 MakeWalter Brucks Typeunknown (missing type plate) Mounted on framecheck Main Features MaterialCopper Motor2.2 KW Inlet diameter600 mm Specified Features - Coating pan MaterialCopper Coating pancheck Pan diameter960 mm Pan depth570 mm In-/Outlet600 mm Motor2,2kW, 380Volt Pan speed16 rpm Information LocationBarneveld With switchcheck Floorspace1,3x0,95 m Total height1,5 m Weight260 kgCoating pansWalter BrucksCoating pans > Coating pansBrand > Walter Brucks What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

- Cut off 452 mm - Web width 660 mm - 5 I units ( one unit incomplete ), works 4 4 - Folding till A5 - Gas dryer VITS - Control panel - machine still in production

Curing tunnel, 20 cm width 6-unit press, 500 x 500, 6 stations Double-deck press

This WIPOTEC SC 30 was manufactured in 2023. It features a high-speed operation with a capacity of up to 240 pieces per minute and a scan width of 320 mm. The system includes stainless steel construction, intuitive touchscreen controls, and an industrial high-performance X-ray unit for precise foreign object detection. Ideal for efficient and accurate sorting operations. Contact us for more information about this machine.

General SKU366W1248 LocationBarneveld CEcheck MakePfaudler-Werke TypeBE 4000 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume4000 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity4000 l. (5369 l.) Vessel sizesø 2000 x 2100 mm Dished bottomcheck Dished top sidecheck Manholecheck Top connectionscheck Outletcheck with valve With jacketcheck Max. temperature—25 / 200 °C With propellor stirrercheck 4 blade cryo lock Motor11 kW, 380 V, 1455 rpm (Ex) Speed mixing shaft125 rpm Glass Reactors MaterialGlass - Enamel Information No.59897 Year of construction1995 Mounted on legscheck Floorspace2,2 x 2,2 m Total height1,2 m Weight6400 kg ATEX compatiblecheck Technical specs Extra informationVolume 504 l, allowable temperature -25°C/+ ...

This 3-axis Wenzel XO 87 was manufactured in 2010. It features a robust CMM machine design with X-axis travel of 800mm, Y-axis at 1000mm, and Z-axis at 700mm. If you are looking to get high-quality measuring capabilities, consider the Wenzel XO 87 machine we have for sale. Contact us for more information.

This panel saw was manufactured in 2011. It features a maximum panel width of 4500 mm and length of 2200 mm, with a saw blade projection of 127 mm. It includes a lifting table, 9 grippers on the sliding stop, and flexible grippers for NC positioning. The saw unit supports a tool diameter up to 470 mm and operates with a motor power of 18.5 KW. Consider the opportunity to buy this SELCO WNTR 730 panel saw. Contact us for more information.