w d used for sale

MIG/MAG hose package -MIG/MAG hose package: water-cooled -Length: 3,2 m -Weight: 3,0 kg

MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled -Number: 2x hose package available -Price: per piece -Length: 6.3 m -Weight: 5.4 kg

Face plate, face plate chuck, four-jaw chuck, facing chuck -Transfer: in the current condition as seen -Face plate: without jaws -Chuck size: Ø 770 mm -Shot: short taper 11 -Hole circle: Ø 235 mm -Through hole: Ø 120 mm -Groove width: 24 mm -Weight: 234 kg

Control cabinet and distribution board, busbars, busbar supports, busbar adapters -Wöhner item no.: 01 508 -Rated current: 690 V/630 A -Quantity: 16 pieces available -Price: per piece -Minimum order: 3 pieces -Dimensions: 190/25/H50 mm -Weight: 0.2 kg/piece

Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Transport frame wheels defective, see picture -Motor: 2.8 kW -Vibrating bottle: length 360 mm -Hose length: 5 m -Dimensions: 1150/520/H690 mm -Weight: 116 kg

Central lubrication, oil circulation system, progressive pump, central lubrication unit -Drive motor: Siemens -Pump: 440 V 0.105 kW -Number: 1 x pumps available -Price: per piece -Dimensions: 290/180/H340 mm -Weight: 8.7 kg

Weibert WJ-FS-41 Profi Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height 4 reversible planing knives WJ-300200

Weibert WJ-FS-41 Top Dressing thickness planing machine Dressing table length 1800mm Planer width 410mm Planer shaft self-adjusting planing knives Thickness height 3-230mm Feed speed 7m/min Professional dressing stop Motor 5.5kW 400V Numerical display of planing height planed dressing and thickness tables Spiral planer knife shaft WJ-300200

Hydraulic pump, oil pump, gear pump -Max.: 600 rpm -Working pressure: 2 bar -Output: 3 l/min -Number: 1x pumps available -Price: per piece -Dimensions: 95/100/H90 mm -Weight: 2.3 kg

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min. Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ---------------------------------------------------------------------- - Short summary: ---------------------------------------------------------------------- - 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ---------------------------------------------------------------------- - Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ------------------------------------------------ Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm ...

MAX DIAMETER 1500 MAX MODUL 15

Jig Boring Machine WMW BKoE 450 x 800 Travel X: 560 mm Travel Y: 400 mm Travel Z: 470 mm Spindle: Ø 90 mm Cone: CM4 Spindle exit: 150 mm Spindle speed: from 50 to 1600 RPM Table size: 450 x 800 mm Maxi loading capacity on table: 400 kg Scale3 axes HEIDENHAIN Automatic descent Voltage: 380 V Width with ends table: 2900 mm / without ends table: 1500 mm Depth:2500 mm Total height: 2600 mm Weight: 4,5 T

SPECIFICATIONS: Pre-spindle machine inlet: 2000 mm Working width: 210 mm Working height: max. 120 mm Cardan shaft drive Drive shaft power: 2.2 kW I. Spindle: Bottom (4 kW) II. Spindle: Right (3 kW) III. Spindle: Left (4 kW) IV. Spindle: Right (5.5 kW) V. Spindle: Above (5.5 kW) VI. Spindle: Above (5.5 kW) VII. Spindle: Bottom (4 kW) With tools

Tapping chucks, thread chucks, tapping chucks, milling tools, tapping attachments -Manufacturer: WMW, thread cutting chuck mount MK3 -Types: GB3 -Dimension: Ø 80 x 270 mm -Weight: 3.7 kg

Pneumatic cylinder, air cylinder, pneumatic stamp, compact cylinder -Manufacturer: Wabco Westinghouse, compact cylinders -Stroke travel: 900 mm -Piston: Ø 80 mm -Piston rod: Ø 22 mm/M20x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 1165/95/H95 mm -Weight: 15.2 kg/piece

dimension of workpiece: 200 mm workpiece weight max.: 100 kg voltage: 230 V longitudinal feed: 150 mm vertical movement: 100 mm tool taper: bis 60 mm im Prisma Condition: new / unused: The machine can be viewed under current.: WMTR video measuring device T 210 Granite base plate 500 x 600 x 50 mm Digital size 0,001 mm resolution Longitudinal axis 150 mm Vertical axis 100 mm Tool holder in prism up to 80 mm diameter Swivel bracket 210 ° swiveling image comparison export of dates to EXCEL frequently measuring of video pictures labeling and marking of pictures saving and printing of pictures free calculation of variables detailed user administration superposition of DXF-drawings a lot of special software-modules Video measuring system IPM complete with: Software complete data acquisition create measurement protocols Consisting of: - Calculator, monitor, mouse, keyboard - ...

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

refrigeration system with a fan Year of construction :1990 Power : 1,1kW Voltage : 220/380 V 50Hz Amperage : 6.6 /5.8 V For further information, please refer to the type plate

Measuring transducers, power measuring transducers, real power measuring transducers, analogue converters, frequency/analogue converters -Manufacturer: ATR, f/U converter -Type: WM275S -Price: per piece -Number: 3 piece -Dimensions: 75/23/H110 mm -Weight: 0.1 kg/piece

Weibert W7-32 5-fold combi woodworking machine New machine (immediately available) Planer width: 320mm Cutting length 1700mm Milling stop for tool max. D=180mm 3 motors 3kW Digital display milling machine Price: kpl. 5874,-€ excl. VAT 6990,-€ incl. VAT

Refrigeration system with a fan Year of manufacture : 1993 Power : 3,2/2,0 kW Voltage : 380 V 50Hz Amperage : 6.4 / 3.7A Capacity : 41,5 dm³

Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Manufacturer: WMW, collets, 12 pieces, with plastic box -Sizes: Ø 3-18 mm, see photos -Sale/Price: complete -Box dimensions: 260/330/H80 mm -Weight: 2.2 kg

Machine type: Kieserling seven-roll straightening machine Working range: Tubes from Ø 15 mm to Ø 75 mm Rods Ø 20 mm to Ø 65 mm Direction of passage: from right to left Speed: approx. 50 m/min Make Kieserling & Albrecht Type: WRUN 1A Location: Solingen Length 2,400 mm Width 2,000 mm Height 1,900 mm Weight 4,600 kg Country of origin: Germany

Manometer, test manometer, pressure measuring device with Bourdon tube, pressure-temperature measurement technology -Manufacturer: Wika, pressure gauge type 212.20.100 1.6 bar -Screw connection: G1/2 B below -Dimension box: 140/110/H60 mm -Weight: 0.6 kg

Saw blade, wood saw blade, circular saw blade, metal circular saw blade, hard metal saw blade -Manufacturer: WMW PWS, saw blade Ø 630 x 6 mm -Inside: Ø 32 mm -Number of teeth: 132 teeth -Number: 19x saw blades available -Price: per piece -Weight: 10,1 kg/piece

Wartsila 8L32 Oil Pump 1Piece available in our stock in Turkey Model: 1v18L36 Original in good condition

live center, live center, live morse taper, live center, live lathe center, live center, centering cone -Manufacturer: WMW ABW, rotating center point -Type: ZN 205 -Recording: MK5 -Number: 9x centering tip available -Price per piece -Dimensions: Ø 92 x 270 mm / Ø 92 x 270 mm -Weight: 4.7 kg /pc.

Wartsila 6L46 crankshaft available from stock standard sized Without any cracks or welding Measurement report available

Catalogue number: 6824 TECHNICAL SPECIFICATIONS - max width of the workpiece 220mm - max height of the workpiece 125mm 4 spindles: 1) horizontal bottom 220mm 7,5kW 2) vertical right 125mm 3) vertical left 125mm; (2 and 3 spindles) 11kW 4) horizontal top 220mm 11kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling, toothed and metal insertion rollers from above - from above 1 double shaft pulling, rubber - from the bottom of the pulling shaft, rubber - feed on cardan shafts - smooth regulation of feed speed 6-22m / min - feed motor 3kW - lifting motor 0,55kW - electrical setting of planing thickness - length of the introductory table top 2470mm - central lubrication - diameter of extraction connection 3x120mm, 140mm - locked in the cabin - dimensions length / width / height 3940x1450x1470mm - weight 1666kg – unpainte ...

ORDER NO. 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - rotor working width 580mm - main engine 18,5kW - pump motor 0,75kW - number of knives 14pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 47900 PLN Net price: 10764 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

Size untrimmed max 410 x 315 mm Size trimmed max 380 x 300 mm Size trimmed min 80 x 50 mm Feeding height max 100 mm False opening max 130 mm Table height 900 mm Good working conditions

Glue Gluing press Basic: 90° stop 3 pressing units with trapezoidal spindle Clamping dimensions: (H x W)1130 x 1900mm Quick adjustment up to 140mm Easy to use Self-clamping The gluing press from Bavaria Universally applicable Exact and accurate to the angle Can be operated by one user G&FE-LEIMO Options: 1 hold-down device G&FE-VP200-NL 1 press units with rack and pinion adjustment Driving device

Roller Wacker WHK 90 L, self-propelled hydraulic articulated roller, hydrostatic drive, 2 cyl. Lombardini diesel engine, air-cooled, 10 kw/14 hp, hydraulic articulated steering, vibration compression. Working width 850 mm, defective water sprinkling, weight 1,335 kg, mast for rotating warning light. Built in 1987, machine running. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

Leimo Plus Gluing press The new, innovative gluing press for clamping frames operable by one user for gluing drawers, carcasses, frames and surfaces, etc. Basic: 3 pressing units with angular gearbox 90° stop and lateral pressure device with angular gearbox Clamping dimensions: 1170 x 2300mm 3 pressing units with trapezoidal spindle 1 side pressure with 2 trapezoidal spindles 2700x700x1750mm G&FE-LEIMO-PLUS

RPW 3000 plus Frame press Clamping dimensions 1600x2900mm Frame 1600x2600mm Contact pressure of 1 t, self-locking, 140 mm travel Versatility - many applications (frame, body, surface gluing) Work facilitation - ergonomic posture Time savings due to user-friendly operation Frames are bolted and can therefore be dismantled Galvanized press units Basic: 3 pressing units with adjustable angular gears, 150mm adjustment range with 2 tons of compressive force! and 90° stop G&FE-RPW-3000PL OPTIONS AT EXTRA COST: Side pressure device with 2 angular gears Hold Chassis

SPECIFICATIONS: Planer: 2500 mm Machinable width: max. 210 mm Working height: max. 150 mm Cardan shaft drive Drive shaft power: 5.5 kW Spindle configuration: I. Spindle: Bottom (4 kW) II. Spindle: Right (4 kW) III. Spindle: Left (5.5 kW) IV. Spindle: Right (4 kW) V. Spindle: Top (4 kW) VI. Spindle: Bottom (4 kW) VII. Spindle: Universal spindle (5.5 kW) With tools.

Machine type: Two-roll straightening machine Working range: from Ø 4 mm to Ø 32 mm Direction: From left to right Speed: 24m/min Make Kieserling Type WRPF 20/30 Year of construction: Refurbished in 2023

Complete Waukesha CHP power plant Including: Generator set Heat recovery Silincer Exhaust pipe Pumps Pipes Oil system Gas line Sound proof housing Air in and outlet The complete installation is in good condition and directly available. GAS POWER HOLLAND 00316 38 63 90 71

Ultrasonic cleaning system WIWOX, Type MC360 III Year of construction: 2006 € 51,438.00 was the original price at that time. After deducting consumables, it was € 47,650.00. The plant was in operation for about 8-12 hours a week, but in the last 5-6 years it has hardly been used because it has switched to a different technology. Our asking price would be € 15,000.00 on the basis of negotiation.

Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Syspal 600HA2 Eurobin wash frame 2021, stainless, SWL 50Kgs, 3Ph

Tool holder, milling holder, milling tool, cutter head -Manufacturer: Wohlhaupter, tool holder 195 015 TO13815 -Take: SK40 -Mandrel: 69871 ANSI 40-SMA 22/63 -Dimension: Ø 64 x 160 mm -Weight: 1.3 kg

Vertical panel saw 5200 x 2200/2100 mm 4 kw motor Panel saw with pliers For trimming pruning

Motor contactor, auxiliary contactor, contactor, semiconductor contactor, contactor, overvoltage protection switch -Manufacturer: Weidmüller, surge protection switch -Type: PU 1+1 C Class II -Number: 6 pieces available -Price: per piece -Dimensions: 90/35/H60 mm -Weight: 0.2 kg/piece

Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder from lathe Kern CD 480 -Type: BDG 6360-0-05-W031-1024-65// -Price: complete -Dimensions: 100/90/80 mm -Weight: 4.3 kg

Inv. Num. : 4427 Type: WMX 60i Producer: HURCO Created: 2017 Parameters: Control system: WINMAX Switch-on hours: 5648 h Operating hours: 1554 h Working table length: 1 680 mm Working table width: 660 mm Maximum table load (uniform): 1 360 kg Spindle drive power: 18 kW Maximum vertical spindle speed: 12 000 1/min X-axis travel: 1560 mm Y-axis travel: 660 mm Cone: SK40 Number of all tools: 30 pieces Maximum tool length: 300 mm Maximum tool weight: 15 kg Machine weight: 9 000 kg

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Ctow7lyof8 Total depth: 1,000 mm (support rod direction) Total width: 980 mm (crossbar direction) Support rod diameter: 35/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 35 mm Mesh size: 90 x 50 mm Weight: approx. 9.35 kg | Pcs. Internal designation: R

Technical data for the grating: Manafacture: Gi-Ro Vreden Condition of the goods: new (unobstructed) Reason for return: Wrong order end customer The scope of delivery includes: 01x Press grate, new (unobstructed) Material color: hot-dip galvanized Total depth: 1,000 mm (support rod direction) Total width: 1,230 mm (crossbar direction) Support rod dimensions: 45/1.7 mm S355JR TS anti-slip: no QS anti-slip: no Edging: T-profile 45 mm Mesh size: 60 x 40 mm Weight: approx. 18.11 kg | Pcs. Internal designation: S Your contacts in our company: Mr. Andre Evering Mr.: Mario Klöver Lord: Falk German General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.