w d used for sale

bore capacity in steel (diameter):50 mm total power requirement:7,8 kW weight of the machine ca.:1720 kg dimensions of the machine ca.:1200 x 770 x 2700 mm number of spindle speeds:45 - 1000 mm surface area:630 x 500 mm

Manufacturer: Weeke, Type: BHX 500, Year: 2007, Work piece width min-max mm: 70 - 1.000, Work piece length min-max mm: 200 - 2.500, Work piece thickness min-max mm: 4 - 80, Working range X: 2.500, Working range Y-axis: 1.000, Working range Z: 80, Vertical drilling station from below: 32, Vertical drilling station from above: 32, Drilling supports horizontal: 2, Horizontal drills-X: 2 x 8, Drill horizontal Y: 2 x 2, Number of spindles: 1.500 - 7.500, Number of spindles: 1.500 - 7.500, Year :2007

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

pressure:300 t distance between columns:1800 mm stroke:1000 mm Distance table/ram, max. stroke up, adjustment up:1300 mm Table surface area:1600 x 1200 mm Table height above floor:1080 mm Ram surface:1600 x 1200 mm Weight:24,0 t Dimensions (WxDxH):2,8 x 2,1 x 6,0 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Manufacturer: WMS, Type: 20051, Year: 2001, Control: Hand, Pneumatical clamping system: yes, Saw blade tiltable up to °: 90-45, Schnitthöhe min-max mm: ca.100, Schnitttiefe min-max mm: 400, Schnittlänge min-max mm: 2110, Width adjustment by engine: yes, Saw blade diameter max mm: 450, Hauptmotorsäge kW: 4, rotations controlled: 2860, Year :2001

DC motor Stromag 70 kW, gearbox 2 x 960 Nm, with Coperion ZSB 70 side feed. The worm shafts and the end head are missing. Therefore, sales as spare parts carriers.

UV disinfection system Make WEDECO Type ME 450 Capacity 35 cbm/h Composed of: UV Reactor, Stainless Steel Housing Material 1.4301 Reactor chamber material: pure quartz Volume 25.0 l Flange connection DN 100, 1.4571, DIN 2576 Empty weight approx. 140 kg, dimensions: 380 mm width x 2215 mm high x 415 mm depth Water temperature 5 °C – 60 °C, operating pressure 10 bar, pressure loss approx. 0.01 bar Protection class IP 65 UV lamps Hg Low Pressure Spectrothermal Emitters Power 160 watts, quantity 10 pieces UV sensor Accuracy +- 10% Switchboard

Description GEA Westfalia Cream Separator MSE 75-01-177[tel:75-01-177] , this machine is used for cream separation and clarification of milk. This machine has been purchased new in 2004 by a very well know dairy keeping the service contracts and condition of there machines in place. The machine has been working until 2024 December. Technical Details Make : GEA Westfalia Model : MSE 75-01-177[tel:75-01-177] Year of Manufacture: 2004 Serial Number : 1723-725 Usage : Cream Separator Capacity : 7500 L/h full skimming Capacity : 10,000 L/h Clarification Full Skimming : 0.01% Tools : Included Controls : Included Condition : Good

Description GEA Westfalia Bacterial Remover ( Bactofuge ) for the dairy industry. This machine is used to remove the bacteria from the raw milk providing a longer shelf life and assurance on cheese cultures activating in a better manner. The machine was purchased in 1999 and has been working until 2025 with all the services required and care keeping this machine in very good working condition. Technical Details : Make : GEA WESTFALIA Model : CND 20-01-076 Year of Manufacture: 1999 Serial Number : 1720 063 Usage : Bacterial Removal Capacity : 7500 L/h Tools : Included Service : 2025 Control panel : included

Max. drilling capacity steel and thread: 60mm, drilling speed: 56-1250/min, motor power: 5.5kW, height: 2400mm. The machine has been regularly serviced, without technical documentation, an on-site inspection is possible.

Double Column - Hydraulic Press RASTER ZEULENRODA (WALTER) Type WUP S 60Masch. No. 136 / 7 (156-165) Year of manufacture 1999Basic machine from 1987, in 1999 Overhauled with new controlPressure capacity 60 ton. Stand width 1090 mmStand passage laterally 265 mm (one-sided) Plunger area 650 x 300 mmAdditional plate on ram 990 x 550 x 60 mmTable area 990 x 550 mmPlunger stroke max. 320 mmInstallation height 330 or 390 mmTable height above floor 980 mmHydraulics Operating pressure 320 barRapid traverse downward 75

Drilling capacity in steel/cast iron: 40mm/60mm, throat depth range: 300mm-1250mm, max. workpiece height: 745mm, spindle mount: MK5, spindle stroke: 355mm, speed: 1200rpm, feed: 756mm/min, column diameter: 300mm, spindle-plate distance: 280mm-1380mm, table dimensions X/Y: 1400mm/750mm. Machine dimensions X/Y/Z: approx. 2200mm/1000mm/2800mm, weight: approx. 3000kg. On-site inspection is possible.

Drilling capacity in steel: 50mm, spindle mount: MK5, speed: 1000rpm, throat depth: 355mm, drilling stroke: 280mm, spindle-table distance: 710mm, spindle-column distance: 355mm, table dimensions X/Y: 630mm/500mm, column diameter: 160mm. Machine dimensions X/Y/Z: 1200mm/800mm/2700mm, weight: approx. 1650kg. On-site inspection is possible.

Travel X/Y/Z/W: 1000mm/900mm/800mm/710mm, speed: 1400rpm, spindle diameter: 90mm, table dimensions: 1250mm/1250mm, max. table load: 3000kg, motor power: 7.5kW. X/Y dimensions: approx. 5500mm/7500mm, weight: approx. 11000kg, control: Newall DP700. Documentation available.

length: 5000 mm payload: 18 : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 180 mm workpiece length: 0 mm work piece width: 1350 mm total power requirement: 65 kW weight of the machine ca.: 7.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 160 t no. of strokes: 40 - 120 Hub/min sheet width: mm total power requirement: 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. 8-track slide bearing guide. Automatic oil-circulation lubr ...

bore capacity in steel (diameter): 60 mm throat: 420 mm bore stroke: mm total power requirement: 4 kW weight of the machine ca.: 2,6 t dimensions of the machine ca.: m Drilling Ø, steel or cast iron 60 mm Boring Ø with pre-bore ½ 100 mm Table Ø 600 mm Distance between spindle and column 420 mm Spindle taper MK5 12 spindle speeds 120 - 800 rpm Quill stroke 270 mm Mounting height above rotary table 800 mm Mounting height above base plate 1,400 mm 8 drilling feeds 0.13 - 1.8 rpm Spindle drive 4 kW Total electrical load, approx. 4 kW - 380 V - 50 Hz Weight approx. 2,600 kg Accessories / Special Features Manual height adjustment of boring head. 2-speed motor drive. Swing-out rotary table. Machined base plate (for setting up workpieces). The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 150000 kg length: 12000 mm width: 5000 mm height: 1400 mm : lenkbar : lenkbar size of tyres: 645 x 250 mm dimensions: 14,4 x 5,0 x 1,4 m Heavy duty trailer with - Double steering - small turning circle - very robust, therefore low maintenance - Reversible drawbar - 50mm impregnated wooden support. (Picture is with steel pad) - Standard paint changes. On request in their Ral color. Chassis: 16 wheels 22x12x16 on 8 axles and 4 rockers Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 35000 kg length: 7000 mm width: 2500 mm height: 600 mm : lenkbar : lenkbar size of tyres: 8 Stk. 450 x 300 mm weight of the machine ca.: 3,9 t dimensions of the machine ca.: 8,9 x 2,5 x 0,6 mm Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40000 kg length: 9000 mm width: 3000 mm height: 850 mm : lenkbar : lenkbar size of tyres: 540 x 300 8-fach mm dimensions: 10,9 x 3,0 x 0,9 m Heavy load trailer with - double steering - small turning circle - Tilt-proof due to steering angle limitation - very robust, thus low maintenance - Reversible drawbar - impregnated wood support. Would you like other loads and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting width: 350mm, dimensions X/Y/Z: approx. 1900mm/800mm/1250mm, weight: approx. 300kg. On-site inspection is possible.

Internal chamber dimensions: 850x720x200mm, cycle output: 2-3 cycles/minute, depending on product size and vacuum, length of sealing bar: 830mm, connected load: 5.5kW, control: WEBOMATIC System 4000, length: 1865mm, width: 870mm, height: 1200mm. The machine was recently inspected and serviced. On-site inspection is possible.

Four dissolvers from various manufacturers are available. 1) Niemann NLD I, year of manufacture: 1995. 2) Vollrath VDSVY 15, year of manufacture: 1992, shaft length: 700mm, disk diameter: 400mm, tank volume: 400l, tank diameter: 785mm, tank height: 990mm, outlet diameter: 45mm. 3) Vollrath VDSVY 40, year of construction: 1991, tank volume: 400l, speed: 1000rpm, shaft length: 700mm, disk diameter: 400mm, machine dimensions X/Y/Z: approx. 3200mm/800mm/1200mm. 4) Pendraulic WDV 10, speed: 1800rpm, shaft length: 985mm, disk diameter: 275mm, lifting height: 1250mm, machine dimensions X/Z: 560mm/3450mm, weight: approx. 850kg. On-site inspection is possible.

bore capacity in steel (diameter): 2...20 mm throat: 210 mm bore stroke: 100 mm total power requirement: 1,1 kW weight of the machine ca.: 0,165 t dimensions of the machine ca.: m - spindle taper: MK 2 - max. drilling capacity: 2 ... 20 mm - distance center drill spindle to column : 210 mm - distance from spindle to table : 400 mm - max. stroke of spindle: 100 mm - adjustment of spindle stock 250 mm - table size: 340 x 280 mm - 4 speeds of drilling spindle: 355 ...2800 per minute - rated power: 1,1 kW - weight: 165 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Worthington Creyssensac RLR208B500G10 Air compressor 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph

Inv. Num. : 8495 Type: WFQ 80 NCA Producer: TOS Generated: Parameters: Work table length: 1600 mm Work table width: 850 mm Maximum weight of the workpiece: 5000 kg X-axis travel: 1600 mm Y-axis travel: 1000 mm Z-axis travel: 950 mm Spindle diameter: 80 mm Machine weight: 22000 kg

Dosing unit - Wittmann Movacolor MCNexus Year of manufacture: 2018 Location: Lodz, Poland Description: Screw dosing device, volumetric Touch control panel It is possible to buy Wittmann suction conveyor with proportional valve for additional payment All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible.

Manufacturer: Westfalia Model: B035-36-177 Year of Manufacture: 1985 Bowl Diameter: 440 mm Bowl Speed: 7270 RPM Permissible Density of Separated Material: 1.1 kg/dm³ Test Pressure: 14 bar SC 35 with throttle valve at the output for capacity regulation Manual pressure adjustment Photocell for blowdown Blowdown timer Find more here - / Contact us at -

Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 1 ...

diameter: 800 mm roll surface width: 1800 mm heating system: Sattdampf 0 0: 860 Liter 0: 5 bar max. temperature: 168 ° C weight: kg range L-W-H: 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.78 m, Overall length= 0.88 m, Overall width= 1.39 m, Net weight= 305 kg,

Key data: 50 mm, 335 mm, 280 mm

Power: 7.8 kW Weight: 1,650 kg Table size: 630 x 500 Speed: 45 - 1,000 rpm Machine is ready for operation and can be dispensed immediately.

Key data: 1100 mm, 1 t

Paternoster for sheet metal coils 7 gondolas, each with a usable width of 110 cm Load capacity 1300 kg Net weight 800 kg Height 235 cm

WEBOMATIC APS ML 4600 THERMOFORMER

Weber Derinder ASC 460, function tested

Set of 4 Gravimetric Feeders: - Brand: Maguire - Model: WSB-960T. - Made of 6 materials each - Year: 2006 - With electrical panel

Radial drilling machine BR 56 x 1600 Year of construction: approx. 1965 (estimate) equipped with coolant device and drilling table as optional accessories

Witzig & Frank high-speed radial drilling machine LEO 32 AS Defects: (clamping no longer works, running noises present)

Dishwasher Winterhalter GS 650 Energy+ Winterhalter Model: GS 650 - Floor-standing machine, stainless steel version - 3 washing programs - Powerful pump - 1 washing basket - Rinse Pump & Cleaner Pump large tank with Energy+ heat exchanger Connection 400 V, 32A-CEE plug Used machine cleaned with warranty + spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Option: Water Delivery Maintenance contract Service Package E-Box for more safety Instruction & Commissioning

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

Key data: 2 mm, 17

Twin screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine No.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. approx. 30 1/min. Worm torque: 10,000 Nm Motor power: 3.3 - 25.0 kW, Drive motor: Commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool Heating Zones: 8 Temperature control: 12 x digital temperature controller KS 40 (PMA) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tools) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Accessories: Material funnel and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hoppe ...