w d used for sale

Weber ASC 560 in absolute top condition

3 Pieces Mitutoyo Micrometers with Digital Display Mechanical as good as new unused / measuring surfaces are still sealed from old stock without transport box very good condition

Reference Num.: 4036 Brand: Konica Minolta Type: Bizhub Pro 951 (black / white) Construction year: 2013 Impressions: 6 mio Available: directly Status: In production Location: Deutschland Equipment: - Scanner - Duplexdruck - Locheinheit - Brosch?renfinisher - Falzeinheit

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Twin-spindle drilling machine, row drilling machine, drilling machine, bench drilling machine, pillar drilling machine -Spindle mount: B13 -Table size: 300 x 1100 mm -Protrusion: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg

core drilling diameter max.: 50-355 mm bore depth: 4000 mm swing diameter: 1000 mm centre height: 500 mm full boring: 18-100 mm main spindle bore: 163 mm turning speeds: 56-710 U/min workpiece weight: 6,3/10 t Tailstock: 70-600 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Drill pipes, guide block, drill head, rolling steady rest, support bearing drill heads, jaws 21- 240 mm, Holder, tools, shelves, cupboards The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Twist drill WMW Ø 68 mm x 335 mm HSS total length: 335 mm spiral length: 130 mm Morse taper shank: MK5 used ! Dimensions: 335 x 70 x 70 mm

Twist drill WMW Ø 52 mm x 415 mm HSS Use: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 55 x 55 mm

Twist drill WMW Ø 54 mm x 415 mm HSS Usage: N Vapor coated Total length: 415 mm Spiral length: 220 mm Morse taper shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill Bit WMW Ø 56 mm x 415 mm HSS Use: N Vapor Coated Overall Length: 415mm Spiral Length: 220mm Morse Taper Shank: MK5 New ! Dimensions: 440 x 60 x 60 mm

Twist Drill WMW / WERKÖ Ø 59 mm x 430 mm HSS Usage: N Vapor Coated Total Length: 430 mm Spiral Length: 240 mm Morse Taper Shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ ) Ø 60 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW / WERKÖ ( WMW/WERKÖ) Ø 61 mm x 430 mm HSS Usage: N Vapor coated Overall length: 430 mm Spiral length: 240 mm Morse taper shank: MK5 New ! Dimensions: 450 x 70 x 70 mm

Twist drill WMW Ø 69 mm x 425 mm HSS Overall length: 425 mm spiral length: 230 mm Morse taper shank: MK5 used, tested ! Dimensions: 430 x 70 x 70 mm

Tool cabinet -with: spare parts for toolmaking, fixture construction -Various drill bushings: different sizes -various clamping elements -Dimensions: 670/300/H2000 mm -Weight: 200 kg

Bench drill WMW BT10/1 Drilling capacity: 10 mm projection: 210 mm Distance table to drill chuck: 210 - 400 mm table: 350 x 250 mm spindle speed: 250, 355, 710, 1000, 1400, 2000, 2500 rpm spindle stroke: 100 mm with footswitch for right and counterclockwise rotation ! Engine Power: 0.7 kW 380 V used, tested ! Dimensions: 620 x 800 x 1950 mm

Bench drill WMW BT2 projection: 210 mm Distance table to drill chuck: 110 - 260 mm Table: 340 x 280 mm spindle speed: 355, 710, 1400, 2800 rpm spindle stroke: 80 mm spindle mount: MK2 with footswitch for right and counterclockwise rotation ! engine power: 1.1 kW 380 V On steel table used, tested ! Very good condition ! Dimensions: 530 x 650 x 1850 mm

Volume Flow Limiter WOERNER DUK-A/2,5/0 New ! Dimensions: 125 x 55 x 50 mm

Volume Flow Limiter WOERNER DUK-A/0/1,8 New ! Dimensions: 125 x 55 x 50 mm

Clamping drive, clamping force generator electric WMW EDU I80 M TGL 0-5471 Bj: 1981 torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V motor: 0.0.220 Vbr /br /motor: 0.0.20 55 kW for other clamping drives see MMZ159, MMZ739 ! New !' Dimensions: 280 x 130 x 170 mm

Clamping Actuator, Clamping Force Generator electric WMW EDU I80 TGL 0-5471 Year: 1982 Torque adjustable in 8 steps from 20 - 120 Nm 80 rpm 220 / 380 V 0,0,0 55 kW for other tensioning drives see MMZ158, MMZ739 ! New !", Dimensions: 280 x 130 x 170 mm

Clamping drive, clamping force generator pneumatic WMW / VORRICHTUNGSBAU HOHENSTEIN B 720 x 106 TGL 30-7608 40 New ! Dimensions: 360 x 200 x 120 mm

3-jaw chuck, three-jaw chuck, power chuck, wedge hook chuck WMW Type: DKRF A/-200x3 ( DKRFA/-200x3 ) TGL 34-185 Outer Ø: 200 mm Bolt circle Ø : 133 mm flange Ø : 175 mm Height with jaws: 230 mm Jaws individually adjustable by toothing ! New !' Dimensions: 200 x 200 x 320 mm

Clamping drive, clamping force generator, electric, with reversing switch WMW EDU I80 F Speed: 80 rpm Torque ( adjustable in 8 steps ): 20 - 120 Nm Motor: KMR 71 K 4 E 0,0,0 55 kW 1380 rpm 220 / 380 V 3AC hollow shaft: spline hub profile 4 x 18 x 22 x 6 ( TGL 0-5471 ) Bolt circle diameter: Ø 90 mm, 4x threaded hole M8 x 1,25 with direction of rotation switch ! used, tested ! Dimensions: 280 x 130 x 190 mm

Clamping drive, clamping force generator pneumatic WMW, VORRICHTUNGSBAU HOHENSTEIN 320 x 106 TGL 30-7608 New ! Dimensions: 340 x 180 x 130 mm

Double bench grinder WMW Type ST300 Year: 1970 Disc drm.: 300 mm Power: 1.1 kW Dimensions: 750 x 420 x 1200 mm

Twist drill WMW-WERKÖ HSS 9930 ( HSS9930 ) MK5 65,0 x 800 Ø 65 mm Dimensions: 960 x 65 x 65 mm

3- Jaw Chuck WMW NILES DHK 200x3 Outer Ø: 200 mm Flange: 155 mm Bore Ø: 60 mm Bolt circle: 175 mm Height with jaws: 125 mm Chuck number: 507 Dimensions: 200 x 200 x 125 mm

Scribing apparatus WMW D45 751.04.453 New ! Dimensions: 200 x 60 x 60 mm

Engine Brand: WAUKESHA, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Working Hours: 19642 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 1038 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1650 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2382 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/waukesha-16v150ltd-generator-1 650kva-used/255, , = More information =, , Empty weight: 12.475 kg, Type number: 16V150LTD GENERATOR 1650kva

3-jaw chuck, three-jaw chuck WMW DH475x3-III TGL 30 2332 outer Ø: 475 mm bolt circle (flange) Ø: 172 hole Ø: 190 mm bore (flange) Ø: 140 mm height with jaws: 195 mm max. 800 rpm used, tested ! Dimensions: 475 x 475 x 195 mm

- Manufacturer: Winterhalter - Type: GS660 - Heating capacity: 12.0 kW - Connected load: 15.8 kW - Rated current: 25.5 A - Water pressure: 250 - 600 kPa - Water temperature: max. 60°C Dimensions: Width: 137cm Depth: 86cm Height: 177cm

Westfalia MSD 50 01 076 Milk & Whey separator Application: Fat separation, cream separation, milk skimming, whey skimming Capacity: 5.000 lt per hour feed milk Including tools and stainless steel base frame

Throughfeed Drilling Machine Weeke PKA3 Workpiece length up to 3000mm 6 x 2 drilling units vertical / from below 2 x 2 drilling units horizontal / from left and right side

Vibrator 2 tubs WALTHER TROWAL type TA 2/145 Internal tub dimensions: L 840 mm x W 360 mm x Depth 470 mm Coating in good condition Loading from the top Unloading of parts through the front traps Functional machine Voltage: 380 V Dimensions (L x W x H): 2600 x 2000 x 1300 mm Weight: approx 4 T

Used stainless steel fluid bed dryer/granulator made by Glatt model WSG-C 60. Year of manufactury 1995. Max. Capacity 1100 kg/day. Installed power 40 kW. Machine includes: - Air filter - Ventilator - Control cabinet - piping - change pan - granulation nozzle Technical documentation available with CE and Atex certificate

Warman Pumps Listing 1.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 2.Pump Type: 3 / 2 CAH - Year of Manufacture: 2005 3.Pump Type: 3 / 2 CAH 4.Pump Type: AH Find more here - / Contact us at -

Drying cabinet WLS Model: TR.Schr. 2 for approx. 100 kg pasta 15 Dry planks with time control Approx. dimensions: 2000 x 880 x 2100 mm, WxDxH Connection 400V, 1.5 kW, 16A-CEE plug Used device cleaned Option: Maintenance contract Service Package Delivery Instruction & Commissioning

Inv. Num. : 8206 Type: WHN 13.4B Producer: TOS Created: 1986 Parameters: Control system: Mefi CNC 859 Work table length: 1600 mm Work table width: 1600 mm Maximum spindle speed: 800 1/min X-axis travel: 2000 mm Y-axis travel: 2000 mm W-axis travel: 1250 mm Spindle diameter: 130 mm Machine weight: 32000 kg 2024: Complete replacement of lubricating oil dispensers Spindle bearing repair (new bearings) Replacing the engine with an overhauled engine

Inv. Num. : 8239 Type: WHN 13 CNC Producer: TOS Created: GO 2004 Parameters: Control system: MEFI X-axis travel: 3500 mm Y-axis travel: 2000 mm Travel distances Z-axis: 1200 mm

Conveyor - Wittmann Feedmax S3-NET / New, unused (3 pcs.) Baujhar: 2023 Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Manufacturer: Wipos Filteranlage, Type: ME 22 S, Year: 1995, Filter system - positive pressure: yes, Volume flow rate m³/h: 4100, Filter surface in m²: ca.50, Hose diameter in mm!: ca.150, Length of filter tubes: ca., Return air capable: no, Vibrator motors: yes, Star feeder: 3, Number of fans: 1, 1st transport fan - bunker kW: 5,5, Year :1995

Manufacturer: Wandress, Type: CH 29M/1650<CRLF>BI 99DS/3/1650, Year: 2002, Control: yes, Dust removal brush: yes, Brush type: Riemen, Number of units: 2, kW Leistung Motoren: 0,5, Number of rotations controlled: yes, Units mounted upright: yes, Working width mm: 1700, Through running hight mm: 120, Roll transport: yes, Feeding speed continous adjustable: yes, Feeding speed min-max m/min: 5-20, kW-Vorschub: 0,75, Electrical hight adjustment: yes, rotor jets: no, FREE TEXT: Vorgeschaltete Entstaubung im High Speed channel HSC 50/2/1650/ Arbeitshöhe 1100 mm, Year :2002

Manufacturer: Wandress Bürstenmaschine Unten 1 Bürste, Type: CM29/950/1500, Year: 2006, Control: Siemens, Dust removal brush: yes, Brush type: Fibre, Number of units: 1, kW Leistung Motoren: 1 x 0,9, Working width mm: 1500, Through running hight mm: 95, Roll transport: yes, Feeding speed continous adjustable: 3 - 120, Feeding speed min-max m/min: links, kW-Vorschub: links, Fixed edge on left: yes, Fixed edge on right: yes, Ionising: 2 x 150, rotor jets: 800, Year :2006

Manufacturer: Weeke BHH 40 Durchlaufbohrmaschine, Type: BHH 40, Control: Woodwoob, Work piece width min-max mm: 30-800, Min.-max. workpiece length in mm: 250-2200, Min.-max. workpiece height in mm: 12-50, Automatisches Rüsten: yes, Automatic width adjustment: yes, Dowel tools Qty: 4, Dovel diameter mm: 8 X 30, Dovel lenght mm: 30, Min - max dowel centre-to-centre distance mm: 32, Schwingförderer Rohre : 4, Drilling support horizontal: 2, Working range max mm: max.60, Dovel units: 6, Work piece refeeding: yes,